| Part |
Picture |
Description |
| RL1-0216-000CN |
Front right hinge stop - Metal stop on right front frame bottom for front door hinge |
| RL1-0217-000CN |
Gear support - Pickup roller drive gears support - Piece that the 43 tooth and 27 tooth gears are mounted to on lower right front of printer |
| RL1-0242-000CN |
Rear cover - Large rectangular cover held in place with four screws - Mounts next to where the power and interface cables exit the high capacity input tray |
| RL1-0612-000CN |
Paper level sensor flag - Paper sensor flag in delivery assembly |
| RL1-0612-030CN |
Bin full sensor flag |
| RL1-0639-000CN |
Top right side cartridge pressure lever - Holds cartridge against high voltage contact - One used |
| RL1-0654-000CN |
Solenoid cover - Cover on left side of duplexer assembly |
| RL1-0891-000CN |
Intermediate paper transfer unit (IPTU) lower cover |
| RL1-0892-000CN |
Intermediate paper transfer unit (IPTU) front cover - Cover behind front door |
| RL1-0892-020CN |
Front Cover - Covers the front and center of the printer |
| RL1-0951-000CN |
Gear support plate - Holds 133-tooth gear, 73-tooth gear, 96/52-tooth gear, 99/40-tooth gear, 43-tooth gear, and 26-tooth gear |
| RL1-1067-000CN |
Rubber foot - Black rubber foot for front base of printer - Two used |
| RL1-1069-000CN |
Gear assembly - Small gear assembly that comes off when removing paper pickup drive assembly on lower right front of printer |
| RL1-1097-000CN |
MP/Tray 1 cover - Front of printer cover that goes over the drop down multi-purpose input tray |
| RL1-1206-000CN |
Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| RL1-1210-000CN |
Rear cover - Plastic cover that protects the rear part of the printer |
| RL1-1213-000CN |
Left top rail - For the 1 x 500-sheet paper input tray |
| RL1-1215-000CN |
Right cassette rail - For the 1 x 500-sheet paper input tray |
| RL1-1216-000CN |
Fuser motor (M11) plate |
| RL1-1272-000CN |
Auxiliary arm - Mounts on the drive frame on the intermediate paper transfer unit (IPTU) |
| RL1-1280-000CN |
Right lower cover assembly |
| RL1-1283-000CN |
Multi-purpose/tray 1 right guide assembly |
| RL1-1284-000CN |
Top cover assembly - Protects the top part of the main printer chassis |
| RL1-1289-000CN |
Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray |
| RL1-1291-000CN |
Air filter - Located on the upper right side of the printer behind the upper right cover |
| RL1-1310-000CN |
Right cassette rail - For the 1 x 500-sheet paper input tray |
| RL1-1311-000CN |
Paper cassette tray left rail |
| RL1-1321-000CN |
3 x 500-sheet paper input tray right front cover |
| RL1-1322-000CN |
1 x 500-sheet paper input tray right front cover |
| RL1-1335-000CN |
Guide, duplexing feed, upper |
| RL1-1390-000CN |
Right rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI) |
| RL1-1391-000CN |
Left rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI |
| RL1-1443-000CN |
Small Paper pickup D size roller - Picks up media from the paper input tray - for HP LaserJet Printer models. |
| RL1-1477-000CN |
Lower internal cover assembly - Internal cover for the saddle assembly - For the booklet maker unit only |
| RL1-1497-000CN |
D-shaped pick-up roller - Located on the paper pick-up assembly |
| RL1-1717-000CN |
Lower front cover - For the stapler/stacker unit |
| RL1-1718-000CN |
Lower rear cover - For the stapler/stacker unit |
| RL1-1785-000CN |
Multi-purpose/tray 1 separation pad |
| RL1-1800-000CN |
Drum Motor (M1) - Will work also as developing motor (M2) |
| RL1-1802-000CN |
Small Paper pickup D size roller - Picks up media from the paper input tray - for HP LaserJet Printer models |
| RL1-1822-000CN |
Rear cover - Plastic square shape cover were rear door mounts on |
| RL1-1823-000CN |
Upper rear cover |
| RL1-1832-000CN |
Lower front cover |
| RL1-1834-000CN |
Motor, dc for HP Color LaserJet CM1312 MFP |
| RL1-1849-000CN |
Front left cassette rail assembly - For the Color LaserJet CP1210/CP1510 series printer |
| RL1-1914-000CN |
Front inner lower cover (CMK) |
| RL1-1914-020CN |
Front inner lower cover (CMK) |
| RL1-1915-000CN |
Front inner lower cover - Small cover that is part of the inner lower cover |
| RL1-1923-000CN |
Base for HP Color LaserJet CP3525 |
| RL1-1928-000CN |
MP pick up roller |
| RL1-1937-000CN |
Multi-purpose/tray 1 separation pad |
| RL1-1941-000CN |
Paper delivery output tray - Holds the paper after it has been printed |
| RL1-1941-030CN |
Paper delivery tray - Holds paper after it has been printed |
| RL1-1947-000CN |
Power on/off switch - Located on the front right side of the printer |
| RL1-1953-000CN |
Rear upper cover - Plastic cover that protects the rear upper side of the printer |
| RL1-1984-000CN |
Stacking panel - For the stapler stacker multi-bin mailbox (MBM) |
| RL1-2099-000CN |
Paper pick-up roller - For the 500-sheet paper cassette tray |
| RL1-2144-000CN |
Base for HP Color LaserJet CP3525 |
| RL1-2181-000CN |
Intermediate paper transfer unit (IPTU) inner cover assembly |
| RL1-2184-000CN |
Roller, MULTI-PURPOSE, PICK-UP |
| RL1-2235-000CN |
Front lock plate |
| RL1-2236-000CN |
Second transfer lock plate |
| RL1-2244-000CN |
Tray 1 pick up roller unit HP printers. |
| RL1-2266-000CN |
Duplexing drive gear plate |
| RL1-2281-000CN |
Plate, Rt. Door Link Fixed, Fr |
| RL1-2282-000CN |
Rear right door link plate |
| RL1-2412-000CN |
Multi-purpose/tray 1 pick-up roller |
| RL1-2438-000CN |
Bottom cover - For the multi-bin mailbox (MBM) |
| RL1-2593-000CN |
Multipurpose/tray 1 Paper pick-up roller assembly |
| RL1-2671-000CN |
Roller paper pick-up |
| RL1-2729-000CN |
Rl1-2729-000cn |
| RL1-2831-000CN |
Environment cover |
| RL1-2899-000CN |
Cover, front for HP CE538A |
| RL1-3024-000CN |
Side Plate, Fuser Drive |
| RL1-3053-000CN |
Developing DC motor (M2) |
| RL1-3063-000CN |
Left Cover Assembly - Plastic Cover That Protects The Left Side Of The Printer |
| RL1-3068-000CN |
Upper Rear Cover Assembly - For Use With Duplex Models Only |
| RL1-3072-000CN |
Rear Cover Assembly - Rectangular Shaped Plastic Cover - For Use With Simplex Models Only |
| RL1-3287-000CN |
Rl1-3287-000cn |
| RL1-3637-000CN |
Front inner lower cover - Screws to the printer main body |
| RL1-3976-000CN |
Iptu Inner Cover R Assy |
| RL1-4000-000CN |
Drawer plate - Holds the drawer connector - For the high capacity input feeder assembly |
| RL1-4003-000CN |
Low-voltage power supply assembly |
| RL1-4005-000CN |
Fuser power supply assembly HP Fuser Power Supply Assembly for Color LaserJet Enterprise M855 M880 Printers |
| RL1-4006-000CN |
Cover Front Inner lower |
| RL2-0013-000CN |
Inner Door |
| RL2-0034-000CN |
Pickup Roller Tray 1 for HP Color LaserJet Enterprise M552 Color LaserJet Enterprise M577
Pickup Roller Tray 1 for HP Color LaserJet Enterprise |
| RL2-0079-000CN |
Multi-purpose/tray 1 separetion roller assembly |
| RL2-0096-000CN |
Upper cover assembly - For simplex model only |
| RL2-0097-000CN |
Upper cover assembly - For Duplex model only |
| RL2-0098-000CN |
Upper cover assembly - For LCD Duplex model only |
| RL2-0501-000CN |
Stapling mailbox stacking panel |
| RL2-0502-000CN |
Stapling mailbox top cover assembly |
| RL2-0544-000CN |
Multi-purpose/tray 1 paper pick-up roller |
| RL2-0546-000CN |
Face down cover assembly |
| RL2-0550-000CN |
Lower rear cover assembly |
| RL2-0656-000CN |
Roller-Multi-Purpose |
| RL2-0657-000CN |
Multi-purpose/tray 1 separation pad |
| RL2-0673-000CN |
Left cover assembly - Plastic cover that protects the left side of the printer |
| RL2-0674-000CN |
Left cover assembly - Plastic cover that protects the left side of the printer |
| RL2-0769-000CN |
Top cover assembly - Plastic L shaped cover that protects the top side of the printer |
| RL2-0770-000CN |
Left upper cover assembly - Plastic cover that protects the upper left side of the printer |
| RL2-0771-000CN |
Rear upper cover assembly - Plastic cover that protects the rear upper side of the printer |
| RL2-0772-000CN |
Right upper cover assembly - Plastic cover that protects the right upper side of the printer |
| RL2-0895-000CN |
Formatter PC board case - For the M527 printer series only |
| RL2-0995-000CN |
Shroud- center |
| RL2-0996-000CN |
Front IS cover assembly |
| RL2-0999-000CN |
Rear right cover assembly - Plastic cover that protects the rear right part of the printer |
| RL2-1000-000CN |
Logo panel - Where the HP logo is located |
| RL2-1500-000CN |
Left drop down door |
| RL2-1682-000CN |
Rear cover assembly - Plastic cover that protects the rear side of the main printer body |
