| Part |
Picture |
Description |
| RL2-1682-000CN |
Rear cover assembly - Plastic cover that protects the rear side of the main printer body |
| RL2-1686-000CN |
Inlet cover assembly |
| RL2-1792-000CN |
Staple stacker/Multi Bin Mailbox solenoid assembly - Includes solenoides SL14, SL15, and SL16 |
| RL2-1827-000CN |
Stapler stacker/Multi Bin Mailbox upper cover assembly |
| RM1-0036-000CN |
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24 tooth white gear on one side. Paper pickup roller - For Tray 2, 3 or 4 paper cassette |
| RM1-0036-020CN |
Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
| RM1-0037-000CN |
Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| RM1-0037-020CN |
Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-0041-020CN |
Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
| RM1-0396-020CN |
Adjustable height caster assembly |
| RM1-0397-000CN |
Paper pickup and feed assembly - Picks paper from the paper stack and feeds it into the printer - Includes the structure and support pieces, gears, rollers, belts, and motor - Mounts in the upper left side of the high capacity input tray |
| RM1-0397-080CN |
Paper pickup and feed assembly - Picks paper from the paper stack and feeds it into the printer - Includes the structure and support pieces, gears, rollers, belts, and motor - Mounts in the upper left side of the high capacity input tray |
| RM1-0403-020CN |
Front cover assembly - Large plastic cover with the light pipe for the operating LED |
| RM1-0404-000CN |
Top cover assembly - Incluedes the rectangular cover and lift-up paper loading access door |
| RM1-0404-020CN |
Top cover assembly - Incluedes the rectangular cover and lift-up paper loading access door |
| RM1-0405-000CN |
Right door assembly - Pull-down paper loading access door - Includes the door and paper guide wings |
| RM1-0405-020CN |
Right door assembly - Pull-down paper loading access door - Includes the door and paper guide wings |
| RM1-0406-000CN |
Rear left cover assembly - Includes the rear left corner cover and the three service LED light pipes - Has a cutout for the power cord and interface cable |
| RM1-0407-000CN |
Front door stop assembly - Small bracket with a spring loaded arm |
| RM1-0407-020CN |
Front door stop assembly - Small bracket with a spring loaded arm |
| RM1-0408-000CN |
Rear door stop assembly - Small bracket with a spring loaded arm |
| RM1-0408-020CN |
Rear door stop assembly - Small bracket with a spring loaded arm |
| RM1-0411-000CN |
Front paper limit guide assembly - Adjustable upright support for the paper stack - Front guide includes the adjustment lock lever and pointer tab - Mounts in the bottom of the paper tray assembly |
| RM1-0411-020CN |
Front paper limit guide assembly - Adjustable upright support for the paper stack - Front guide includes the adjustment lock lever and pointer tab - Mounts in the bottom of the paper tray assembly |
| RM1-0412-000CN |
Rear paper limit guide assembly - Adjustable upright support for the paper stack - Mounts in the bottom of the paper tray assembly |
| RM1-0412-020CN |
Rear paper limit guide assembly - Adjustable upright support for the paper stack - Mounts in the bottom of the paper tray assembly |
| RM1-0415-040CN |
Image drive assembly - Vertical gear drive assembly on front right side of printer |
| RM1-0419-020CN |
Drive assembly - Developer disengaging planetary gear drive assembly - Located on lower front right side of printer |
| RM1-0420-130CN |
Image transfer assembly - Includes the support frame, image transfer belt (ITB), rollers, covers, and drive gears |
| RM1-0428-000CN |
Image Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation (New OEM |
| RM1-0428-060CN |
Image Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation |
| RM1-0428-090CN |
Image Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation |
| RM1-0428-120CN |
Replacement for part RM1-0428-060CN Image Fuser Assembly - Bonds toner to paper with heat - For 110V to 127VAC operation |
| RM1-0430-090CN |
Image Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC operation |
| RM1-0430-130CN |
Fuser Assembly - For 220 VAC operation - Bonds toner to paper with heat |
| RM1-0434-000CN |
Developing engaging drive assembly - |
| RM1-0437-000CN |
Right side swing frame assembly - Right toner cartridge guide - Black plastic with cartridge guide on right side with color labels |
| RM1-0437-040CN |
Right side swing frame assembly - Right toner cartridge guide - Black plastic with cartridge guide on right side with color labels |
| RM1-0438-000CN |
Right swing guide assembly - Black plastic guide on lower right side |
| RM1-0439-000CN |
Left side swing frame assembly - Black plastic frame with cartridge guide on right side with cartridge electrical contacts. |
| RM1-0439-020CN |
Left side swing frame assembly - Black plastic frame with cartridge guide on right side with cartridge electrical contacts |
| RM1-0440-000CN |
Electrical connector for fuser assembly - Located on lower left side of printer frame - Includes cable from DC controller board |
| RM1-0441-000CN |
Left swing rod assembly - Plastic arm with metal insert |
| RM1-0442-000CN |
Right swing rod assembly |
| RM1-0443-000CN |
Left front rod assembly - Part of left side front door hinge - Disengages color cartridges when front door opens |
| RM1-0444-000CN |
Right front rod assembly - Part of right side front door hinge - Disengages Image Transfer Belt (ITB) when front door opens |
| RM1-0445-000CN |
Transfer contact assembly - Electrical contact assembly for ITB (Image Transfer Belt) |
| RM1-0446-000CN |
Developing contact assembly - Large black plastic frame on left side with multiple contact springs |
| RM1-0449-000CN |
Paper pickup assembly - Tray 2 paper pickup/feed assembly |
| RM1-0451-000CN |
Color mis-registration sensor assembly - Assembly that holds photosensor PS12 |
| RM1-0451-020CN |
Color mis-registration sensor assembly - Assembly that holds photosensor PS12 |
| RM1-0458-000CN |
Duplexer guide assembly - Flipper guide assembly at bottom back of printer - Directs paper to duplexer path |
| RM1-0459-000CN |
Front support foot - Black plastic support foot for front of Tray 2 - Two used |
| RM1-0460-000CN |
Paper feed guide assembly - Paper guide assembly in bottom of printer |
| RM1-0461-000CN |
Duplexer feed guide assembly - Paper guide at bottom of printer for duplexer paper path |
| RM1-0462-000CN |
Right side paper feed guide assembly for duplexer - Position guide for duplexer |
| RM1-0463-000CN |
Front cover assembly - Front of printer including drop down MP/Tray 1 assembly. |
| RM1-0463-020CN |
Front cover assembly - Front of printer including drop down MP/Tray 1 assembly |
| RM1-0464-000CN |
Tray 1/MP Tray assembly - Innermost hinged portion of MP tray with adjustable paper width guide |
| RM1-0466-030CN |
Left side plastic cover for printer - DIMM access side |
| RM1-0467-000CN |
Left front cover assembly - Left front corner plastic with control panel |
| RM1-0468-000CN |
Face-up output tray assembly - Drop down paper output tray on rear of printer |
| RM1-0469-000CN |
Face-down delivery assembly - Large black plastic assembly on back of printer |
| RM1-0470-000CN |
250 Sheet tray - Tray 2 paper holding cassette assembly |
| RM1-0470-030CN |
250 Sheet tray - Tray 2 paper holding cassette assembly |
| RM1-0475-000CN |
Main cable - Large cable connected to DC controller board |
| RM1-0476-000CN |
Option connecting cable - |
| RM1-0477-000CN |
Sensor cable - Cable for Feed Delivery sensor PS8 |
| RM1-0478-000CN |
Lower frame cable - Cable under 250 sheet tray/Tray 2 |
| RM1-0482-000CN |
CPR connecting cable - From DC controller to PS12/Color Misregistration sensor |
| RM1-0483-000CN |
Formatter power supply cable - From Low Voltage power supply to DC controller board |
| RM1-0485-000CN |
High voltage cable - From high voltage PC board to DC controller board |
| RM1-0488-000CN |
Front left cable - DC Controller to PS5/Media sensor |
| RM1-0489-000CN |
Operation panel cable - Cable that connects to control panel |
| RM1-0493-000CN |
Environment sensor cable - Cable between humidity sensor and DC Controller board |
| RM1-0495-000CN |
Main cable - Large cable connected to DC controller board |
| RM1-0496-000CN |
Option connecting cable - |
| RM1-0497-000CN |
Lower frame cable - Cable under 250 sheet tray/Tray 2 |
| RM1-0498-000CN |
Formatter power supply cable - From Low Voltage power supply to DC controller board |
| RM1-0505-000CN |
High voltage power supply assembly - Large PC board located on left side of printer |
| RM1-0506-040CN |
DC Controller board - Located on rear lower left of printer - For LJ 3700 only |
| RM1-0506-050CN |
DC Controller board - Located on rear lower left of printer - For laserJet 3700 only |
| RM1-0508-000CN |
Memory controller PC board assembly - E-label and waste toner full controller |
| RM1-0508-030CN |
Memory controller PC board assembly - E-label and waste toner full controller |
| RM1-0509-000CN |
Sensor assembly - Waste toner hopper full sensor (PS13) assembly - Does not include lenses or mounting plate |
| RM1-0510-000CN |
DC controller board assembly - Located on rear lower left of printer |
| RM1-0510-040CN |
DC controller board assembly - Located on rear lower left of printer - For LJ3500 |
| RM1-0510-050CN |
DC controller board assembly - Located on rear lower left of printer - For LJ3500 |
| RM1-0511-000CN |
Operation panel assembly - Control panel PC board |
| RM1-0515-000CN |
Damper assembly - Includes the support bracket and spoked gear - Dampens the paper lift function - Mounts on the back of the front inside wall of the paper tray assembly |
| RM1-0515-020CN |
Damper assembly - Includes the support bracket and spoked gear - Dampens the paper lift function - Mounts on the back of the front inside wall of the paper tray assembly |
| RM1-0516-000CN |
Lifter drive assembly - Includes the support bracket, motor, gears, links, and pulley - Raises and lowers the bottom of the paper tray assembly |
| RM1-0516-030CN |
Lifter drive assembly - Includes the support bracket, motor, gears, links, and pulley - Raises and lowers the bottom of the paper tray assembly |
| RM1-0701-000CN |
Paper pickup drive assembly - Includes a metal plate with the paper feeder pickup clutch, paper feeder pickup solenoid, feed drive board, pickup roller drive shaft, and drive gears |
| RM1-0705-000CN |
500-sheet paper cassette tray assembly (only) |
| RM1-0707-000CN |
Swing assembly - Includes the paper feed clutch assembly and the printer driven gear in a spring loaded arm |
| RM1-0709-000CN |
Pressure roller assembly - Plastic support frame with two small spring loaded rollers - Rolls against the rubber feed roller |
| RM1-0731-020CN |
Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
| RM1-0731-030CN |
Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
| RM1-0731-040CN |
Paper pickup roller assembly - Includes the D shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
| RM1-0731-050CN |
Paper pickup roller assembly - Includes the 'D' shaped rubber roller on a plastic shaft - Mounts in the lower center of the center frame assembly |
| RM1-0733-000CN |
Drum motor - Provides power to turn cartridge drums - Motor M3 |
| RM1-0736-000CN |
Right cassette guide - Right side cassette guide for 250 sheet Tray 2 |
| RM1-0737-000CN |
Developing motor - Located on upper right side inside frame - Motor M4 |
| RM1-0739-020CN |
Separation pad assembly - For Tray 2 - Includes pad holder and separation pad |
| RM1-0740-000CN |
Transfer roller assembly - T2 transfer roller, bushings and holders |
| RM1-0741-040CN |
Paper pickup assembly - Tray 2 paper pickup/feed assembly |
| RM1-0741-070CN |
Paper pickup assembly - Tray 2 paper pickup/feed assembly |
| RM1-0742-000CN |
Media sensor assembly - Paper type sensor assembly - Includes sensor PS5 |
| RM1-0743-000CN |
Top cover assembly - Top of printer with face down paper output |
| RM1-0744-000CN |
Face-down delivery assembly - Large black plastic assembly on back of printer |
