Part |
Picture |
Description |
RB2-1205-000CN |
Right rear corner cover - A/C input connector cover |
RB2-1206-000CN |
Lower rear cover |
RB2-1215-000CN |
Tray extension - Attaches to ITB drawer - Supports media in tray 1 |
RB2-1224-000CN |
Connector cover - Right side |
RB2-1277-000CN |
Main cable guide - Protects and secures main cable |
RB2-1282-000CN |
Air filter - Large filter at right rear of printer |
RB2-1283-000CN |
Air filter - For small fan at left rear of printer |
RB2-1284-000CN |
Sensor rod - Actuates rear door open sensor |
RB2-1361-000CN |
ITB drawer handle |
RB2-1456-000CN |
Lower cable guide - Bottom half of the DC controller to drum cable |
RB2-1457-000CN |
Upper cable guide - Top half of the DC controller to drum cable |
RB2-1556-000CN |
Cover support strap - Supports rear door - Right side |
RB2-1820-020CN |
Pickup roller - Tray 1 pickup roller |
RB2-1820-040CN |
Pickup roller - Tray 1 pickup roller |
RB2-2470-000CN |
Cam for Color LaserJet 8550 Series |
RB2-2471-000CN |
Arm for Color LaserJet 8550 Series |
RB2-2475-000CN |
Flag for Color LaserJet 8550 Series |
RB2-2503-000CN |
Roller Feed for HP 09998390001 |
RB2-2509-000CN |
Clutch cover for 2000 sheet input tray |
RB2-2511-000CN |
Roller for Color LaserJet 8550 Series |
RB2-2512-000CN |
Roller for Color LaserJet 8550 Series |
RB2-2519-000CN |
Back cover - Protects back of tray assembly |
RB2-2843-000CN |
Torsion spring - Provides a small amount of back pressure for the paper sensor flag. (Flag sold separately RB2-6264-000CN). |
RB2-2892-000CN |
Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller |
RB2-2895-000CN |
Shaft bushing/retainer - Right side pickup roller support bushing |
RB2-2896-000CN |
Shaft bushing/retainer - Left side pickup roller support bushing |
RB2-2897-000CN |
Shaft bushing/retainer |
RB2-2897-020CN |
Shaft bushing/retainer |
RB2-2904-000CN |
Guide roller (free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller |
RB2-2973-000CN |
Support bushing |
RB2-3003-040CN |
Plate end - Movable end plate at back of Tray 2 paper cassette |
RB2-3009-000CN |
Lock Arm - Locks Rear Paper Length Adjustment Plate |
RB2-3009-040CN |
Lock arm - Locks rear paper length adjustment plate |
RB2-3019-000CN |
Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use) |
RB2-3041-000CN |
Tray hinge - For the left side of the multi-purpose front input tray (tray one) |
RB2-3042-000CN |
Tray hinge - For the right side of the multi-purpose front input tray (tray one) |
RB2-3043-000CN |
Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1) |
RB2-3044-000CN |
Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1) |
RB2-3489-000CN |
Inner cover (Small Quartz Gray plastic cover) |
RB2-3512-000CN |
Torsion spring - Provides tension for the pivot plate |
RB2-3690-000CN |
Clutch Cover for HP 09998390001 |
RB2-3691-000CN |
Outrigger cover - Adjustable stabilizer leg cover - Six used |
RB2-3706-000CN |
Guide, Paper for HP 09998390001 |
RB2-3707-000CN |
Spring Torsion for HP 09998390001 |
RB2-3713-000CN |
Limiter Torque for HP Laserjet Printers. |
RB2-4933-000CN |
Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever |
RB2-5185-000CN |
Bushing - Supports left side of cartridge drum |
RB2-5342-000CN |
2000 sheet paper tray cassette size label |
RB2-5570-020CN |
Door dampener hinge mount - Left side/fuser door dampener mount (two used, please order qty of two if you need two pcs)Only one included. |
RB2-5682-000CN |
Lower right front corner cover for tray 2 and 3 |
RB2-5683-000CN |
Lower left front corner cover for tray 2 and 3 - Does not include power button |
RB2-5687-000CN |
Lower left cover - Smaller plastic piece below left door and diverter assembly |
RB2-5689-000CN |
Lower right cover - Small plastic piece below right door assembly |
RB2-5690-000CN |
Face up paper output tray |
RB2-5759-000CN |
Torque limiter for HP LaserJet 9040 9050 Series |
RB2-6248-000CN |
Damper assembly (Gray plastic piece with small 13-tooth gear on it) |
RB2-6297-000CN |
Rubber foot - Square self-adhesive rubber foot |
RB2-6324-000CN |
Clutch - for HP Color LaserJet 3500 Series |
RB2-6405-000CN |
Tray hinge - For the left side of the multi-purpose front input tray (Tray 1) |
RB2-6406-000CN |
Tray hinge - For the right side of the multi-purpose front input tray (Tray 1) |
RB2-6448-000CN |
Mechanical sensor flag (black plastic) |
RB2-6450-000CN |
Leaf spring for HP Color LaserJet 3500 Series |
RB2-6451-000CN |
Leaf spring for HP Color LaserJet 2500 Series |
RB2-6452-000CN |
Cross-brace (metal plate with stamped in guide pin on left side) |
RB2-6452-020CN |
Cross-brace - Metal plate with stamped in guide pin on left side - Mounts on the bottom of the center support frame (two used) - Adds rigidity to the base assembly structure - For the 500-sheet input tray assembly |
RB2-6453-000CN |
Inner cover (Small Quartz Gray plastic cover with sensor flag slot) |
RB2-6469-000CN |
Paper stop end plate - Mounts at rear of the 500-sheet paper cassette tray assembly |
RB2-6472-000CN |
Shipping stopper (bright orange plastic) - Helps to prevent damage to the paper tray by restricting the movement of the lift plate (Removed for normal use) |
RB2-6495-000CN |
Holder clip lock - Secures the ADF/Scanner assembly to the top of printer (four used) |
RB2-7170-000CN |
Air Filter - Pull out air filter on rear cover |
RB2-7181-000CN |
Cleaner guide - Guides for ITB cleaner blade - 2 used |
RB2-7182-000CN |
Damper mounting block - Right side ITB door damper mounting bracket |
RB2-7195-000CN |
Sensor flag roller (small White plastic roller) |
RB2-7206-000CN |
Ozone filter - Charcoal air filter on right side upper cover |
RB2-7207-000CN |
Waste toner catch tray - Slides beneath Intermediate Transfer Belt (ITB) cleaner assembly to collect waste toner |
RB2-7258-000CN |
Holder lift link - Black plastic fuser assembly lock link |
RB2-7281-000CN |
Grounding plate - Electrical ground plate on right side of ITB rear guide rail |
RB2-7302-000CN |
Side plate hinge support - Image drum door hinge |
RB2-7321-000CN |
Top cover - Right side top cover |
RB2-7331-000CN |
Right front cover - Thin vertical plastic cover - Mounts on the right front of the printer |
RB2-7332-000CN |
Top right cover - Cover on right side above Tray 1 |
RB2-7335-000CN |
Left front cover - Small vertical piece on left side of left cover assembly |
RB2-7336-000CN |
Left upper cover assembly |
RB2-7341-000CN |
Top tray - Moveable face-down paper output tray |
RB2-7352-000CN |
Cover - Right side rear corner of printer cover |
RB2-7354-000CN |
Switch rod - Mechanical connection between power button and Low Voltage Power Supply PCA |
RB2-7358-000CN |
Control panel - Insert on left side of control panel for 110V application |
RB2-7376-000CN |
Feed guide - Mounts to the bottom of the delivery feed assembly on the left side of the printer |
RB2-7444-000CN |
Transfer cable cover - Protects ITB and secondary transfer roller cables from ITB lift mechanism |
RB2-7445-000CN |
Transfer roller assembly cover - Front cover of secondary transfer roller assembly |
RB2-7447-000CN |
Door strap - Narrow plastic strap with a screw hole in one end |
RB2-7501-000CN |
Link retainer - Retainer clip that holds secondary transfer assembly link arm in place |
RB2-7515-000CN |
Front cleaner support - White plastic piece that attaches to metal support for ITB cleaner assembly on front of printer |
RB2-7531-000CN |
Rail cover - Fits over guide for left side of ITB assembly - protects ITB sensors |
RB2-7537-000CN |
Positioning plate - Attaches to metal support for ITB cleaner assembly on front of printer |
RB2-7570-000CN |
Front cleaner support - Metal support for ITB cleaner assembly on front of printer |
RB2-7648-040CN |
Front cover and handle asembly - Plastic cover the protects the fornt side of the 2,000-sheet paper feeder tray 4 assembly |
RB2-7649-000CN |
Right cover for the 2,000-sheet paper feeder assembly |
RB2-7650-000CN |
Right rear cover for the 2,000-sheet paper feeder assembly |
RB2-7651-000CN |
Left rear cover for the 2,000-sheet paper feeder assembly |
RB2-7652-000CN |
Top cover for the 2,000-sheet paper feeder assembly |
RB2-7662-000CN |
Jetlink connector housing and cable holder assembly |
RB2-7678-020CN |
Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
RB2-7678-030CN |
Stationary rear caster - Mounts on the bottom frame of the 2,000-sheet paper feeder assembly (two used) |
RB2-7709-000CN |
Caster for HP LaserJet 9000 Series |
RB2-7709-020CN |
Caster for HP LaserJet M9040 MFP |
RB2-7762-020CN |
Paper size switching lever - To adjust paper size in tray (standard or custom size) |
RB2-7884-000CN |
Lower ADF delivery roller - Mounts on a short shaft at the left end of the scanner assembly (four used - two per shaft) |
RB2-7902-000CN |
Flatbed ADF scanner lens cover - Black plastic piece that clips over bottom of scanner lens |
RB2-7920-000CN |
Ground plate - Small plate with two tangs - Grounds the end of the carriage rod for the scanner optical assembly - Mounts on the right end of the scanner assembly towards the rear |
RB2-7927-000CN |
Glass mounting alignment clip - Used to properly align the copyboard glass in the scanner assembly cover frame - Mounts in the left rear corner of the frame (one used) |