| Part |
Picture |
Description |
| RC1-6044-000CN |
2 X 500 sheet feeder right side cover |
| RC1-6045-000CN |
2 X 500 sheet feeder right lower cover |
| RC1-6046-000CN |
2 X 500 sheet feeder left front corner cover |
| RC1-6047-000CN |
Right front cover for 2 X 500 sheet paper feeder assembly |
| RC1-6048-000CN |
Rear cover for 2 X 500 sheet paper feeder assembly |
| RC1-6067-000CN |
2 X 500 sheet feeder left lower caster cover |
| RC1-6068-000CN |
2 X 500 sheet feeder right lower caster cover |
| RC1-6154-000CN |
Intermediate paper transfer unit (IPTU) rear cover |
| RC1-6158-000CN |
Intermediate paper transfer unit (IPTU) front door |
| RC1-6286-000CN |
Output bin sensor - For the Color LaserJet 2700 printer series |
| RC1-6381-000CN |
Tray hinge link - Left side link for drop down multipurpose input tray hinge |
| RC1-6382-000CN |
Tray hinge link - Right side link for drop down multipurpose input tray hinge |
| RC1-6383-000CN |
Tension spring - Provides tension for front dropdown multipurpose paper input tray - Two used |
| RC1-6405-000CN |
Gear assembly cover - Cover for paper pickup gear assembly on right lower side of printer |
| RC1-6491-000CN |
Front cover - Front cover for 250 sheet paper tray/cassette |
| RC1-6499-000CN |
Cassette guide - Left side guide for media cassette |
| RC1-6502-000CN |
Cassette guide - Right side guide for media cassette. |
| RC1-6516-000CN |
Tension spring - Provides tension for the feed roller bushing inside of paper pick up assembly |
| RC1-6517-000CN |
Roller bushing - Left side bushing for feed roller inside of paper pick up assembly |
| RC1-6518-000CN |
Roller bushing - Right side bushing for feed roller inside of paper pick up assembly |
| RC1-6519-000CN |
Clutch, mechanical |
| RC1-6520-000CN |
Compression spring - Provides pressure for clutch and 18 tooth gear on right side of paper pickup assembly |
| RC1-6521-000CN |
Drive gear - 18 tooth gear on right side of paper pickup assembly |
| RC1-6571-000CN |
58 tooth drive gear - Located between the toner motor and image drive assembly - Fout used |
| RC1-6573-000CN |
Gear bushing - Located between 29 tooth image drive gear and chassis on right side of printer |
| RC1-6575-000CN |
Image drive gear - 29 tooth image drive gear - Located inside chassis on right side of printer |
| RC1-6584-000CN |
Cam gear - 48 tooth gear associated with the cartridge for engaging the developing rollers - Four used |
| RC1-6589-000CN |
41 tooth gear - Mechanically connects the four cartridge engaging rollers - Two used |
| RC1-6593-000CN |
Cluster gear - 19 tooth/30 tooth gear mounted in gear assembly on right side of printer |
| RC1-6594-000CN |
31 tooth gear - Gear located in the fuser drive assembly on top RC1-6275 |
| RC1-6596-000CN |
Cluster gear - 17 tooth/41 tooth gear mounted in gear assembly on right side of printer |
| RC1-6605-000CN |
Aliention flag - Senses if the black or all the color cartridges are in the proper position - Two used (this price is for 1pc). |
| RC1-6607-000CN |
PC board cover - Pickup and feed driver PCA cover |
| RC1-6609-000CN |
Roller cover - Covers the cassette paper pickup roller assembly |
| RC1-6611-000CN |
Sensor cover - Small metal cover for paper sensor located at right rear of paper pickup assembly |
| RC1-6612-000CN |
Paper registration cover - Small metal cover for paper registration sensor located at left rear of paper pickup assembly |
| RC1-6627-000CN |
Rear cover - External metal rear cover of printer |
| RC1-6629-000CN |
Cartridge guide - Left side guide assembly for toner cartridges |
| RC1-6631-000CN |
Fan holder - Mounting assembly for main cooling fan - Located on lower left side of printer - Fan FM1 |
| RC1-6632-000CN |
Air duct - Deflects air from fan FM1 |
| RC1-6633-000CN |
Lock lever - This is the left side lock for the three color cartridges |
| RC1-6634-000CN |
Tension spring - Spring that connects between the cartridge locks and the slider plate on left side of printer - Four used |
| RC1-6636-000CN |
Lever slide lock - Slide that locks and unlocks the individual levers on the left side |
| RC1-6638-000CN |
Left slide cam - Small plastic cam that moves inside left side door rod link |
| RC1-6639-000CN |
Left rod link - Left side door rod link |
| RC1-6640-000CN |
One Lock lever usually come in either wht or blk - Four total used on the printer this price is for 1 PC. Item will ship with HP CLJ 3800/3600/3000 (Cartridge Lock Replacement instructions recommended Q5982-instructions_kit). |
| RC1-6640-020CN |
One Lock lever usually come in either wht or blk - Four total used on the printer, this price is for 1 PC. Item will ship with HP CLJ 3800/3600/3000 Cartridge Lock Replacement Procedure, A MUST!(will be included) |
| RC1-6641-000CN |
Grounding spring û Provides chassis ground for toner cartridges - Four used for this printer this price is for qty 1. (purchase suggested instructions Q5982-instructions_kit). |
| RC1-6641-020CN |
Grounding spring û Provides chassis ground for toner cartridges - Four used for this printer, this price is for qty 1. |
| RC1-6643-000CN |
Lever slide lock - Slide that locks and unlocks the individual levers on the right side (purchase suggested instructions Q5982-instructions_kit). |
| RC1-6643-020CN |
Lever slide lock - Slide that locks and unlocks the individual levers on the right side (purchase suggested instructions Q5982-instructions_kit). |
| RC1-6643-030CN |
Lever slide lock - Slide that locks and unlocks the individual levers on the right side (purchase suggested instructions Q5982-instructions_kit). |
| RC1-6645-000CN |
Right slide cam û Cam that actuates the cartridge levers and locks |
| RC1-6645-010CN |
Right slide cam û Cam that actuates the cartridge levers and locks |
| RC1-6646-000CN |
Right rod link - Right side door rod link |
| RC1-6650-000CN |
Rear foot - Black plastic foot for rear base of printer - Two used |
| RC1-6651-000CN |
Shutter cover - Left side toner cartridge shutter cover - Four used |
| RC1-6652-000CN |
Drawer connector holder - This is the connector holder for Tray 3, where the electrical connections are made between the printer and Tray 3 - Black plastic |
| RC1-6653-000CN |
Drawer holder - Sheet metal piece that holds the connector for the fuser - Left side of printer |
| RC1-6668-000CN |
Upper support cover - This is black plastic under the sheet metal that is under the fuser |
| RC1-6673-000CN |
Electrostatic Transfer Belt (ETB) holder - Left side ETB support |
| RC1-6673-020CN |
Electrostatic Transfer Belt (ETB) holder - Left side ETB support |
| RC1-6674-000CN |
Electrostatic Transfer Belt (ETB) holder - Right side ETB support |
| RC1-6677-000CN |
Tension spring - Provides tension for right side toner cartridge lock lever - Four used (purchase suggested instructions Q5982-instructions_kit). |
| RC1-6681-000CN |
Cable guide - Fuser cable housing - Located in upper left side of printer |
| RC1-6682-000CN |
Right side cable guide - Located in the bottom right side of the printer - Round molded part fits over a motor - Black plastic |
| RC1-6684-000CN |
Left side hinge mount - Left side ETB guide hinge mount |
| RC1-6687-000CN |
Left side cover - Plastic cover for left side of printer - Does not include HP logo |
| RC1-6687-020CN |
Left cover assembly - Plastic cover that protects the left side of the printer |
| RC1-6690-000CN |
MP/Tray 1 cover - Front of printer cover that goes over the drop down multi-purpose input tray |
| RC1-6691-000CN |
Right rear cover hinge - Legal paper size tray cover hinge - Located at right rear/bottom of printer |
| RC1-6700-000CN |
Switch link arm - Connects the on/off switch on the right side door to the actual switch on the LVPS - Metal rod link |
| RC1-6703-link_arm |
Link-arm white for HP 3600 3800 3000 near transfer belt in front door. Printer uses qty of 2 order is for one. |
| RC1-6744-000CN |
Paper diverter - Diverts the paper so that it is redirected back into the machine and goes through the duplex paper path |
| RC1-6755-000CN |
Output bin page flag sensor - For duplex model only |
| RC1-6771-000CN |
Toner cartridge holder - Plastic support for right side of toner cartridge - Four used |
| RC1-6771-020CN |
Toner cartridge holder - Plastic support for right side of toner cartridge - Four used |
| RC1-6772-000CN |
Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the right rear side of printer |
| RC1-6773-000CN |
Flat cable guide - Located on the bottom of the printer and help guide flat cables from the Driver PCA, Memory board, and the Tray 2 media sensor up to the DC Controller PCA - This is the guide on the left rear side of printer |
| RC1-6792-000CN |
Left rear cover - Legal paper size cassette cover - Located at rear/bottom of printer |
| RC1-6792-010CN |
Left rear cover - Legal paper size cassette cover - Located at rear/bottom of printer |
| RC1-6795-000CN |
Paper guide crossmember cover - Used as a support to help guide paper through the paper path - Located inside near top of printer |
| RC1-6823-000CN |
Gear bushing - Located between the 48 tooth cam gear and the metal chassis on the right side of printer - Four used |
| RC1-6824-000CN |
Slide cover - Covers right side lock lever slide |
| RC1-6824-020CN |
Cvr, side plate rht |
| RC1-6825-000CN |
Cable guard - Protects the cables (non-flat type) from being pinched between PC boards and sheet metal on upper left side of printer |
| RC1-6833-020CN |
Plate lock release |
| RC1-6875-000CN |
Plate, left for HP Color LaserJet 2700 Printer |
| RC1-6945-000CN |
Front cassette cover - Plastic front cover for 500 sheet paper tray |
| RC1-7019-000CN |
Right upper gear cover - Located next to the right lower cartridge giude |
| RC1-7021-000CN |
Grounding plate - Provides grounding for the photo interrupter |
| RC1-7121-000CN |
Cartridge guide - Front left side toner cartridge guide |
| RC1-7123-000CN |
Torsion spring - Located on the left cartrige guide - Spring that is used for the movement of the left cartridge guide |
| RC1-7124-000CN |
Grounding spring - Used inside the print engine |
| RC1-7125-000CN |
Torsion spring - Provides torsion to the paddle of the left cartridge guide |
| RC1-7126-020CN |
Compression spring - Used in the side plate inside the print engine |
| RC1-7127-000CN |
Compression spring - Fuser bias contact for fuser grounding |
| RC1-7127-010CN |
Spring Compression |
| RC1-7129-000CN |
Transfer drive side plate - Plate that holds the 33-tooth gear, 35-tooth gear, 25-tooth gear, and the bushing |
| RC1-7141-000CN |
Cap, paper feed guide |
| RC1-7144-000CN |
Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |
| RC1-7145-000CN |
Torsion spring - Provides radial tension for loop sensor flag located on the high voltage power supply |
| RC1-7163-000CN |
Fusing shutter - Fuser shutter door - Closes when cartridge access door is opened |
| RC1-7241-000CN |
Contact holder - Holds fuser bias contacts. |
| RC1-7249-000CN |
Support bushing - Axial support for top sensor flag - Two used |
| RC1-7261-000CN |
Paper sensor flag - Leading edge paper sensor flag |
| RC1-7264-000CN |
Cross member auxiliary plate |
| RC1-7265-000CN |
Contact holder cover - Fuser bias contact cover. |
| RC1-7268-000CN |
Sensor holder - Media leading edge sensor holder |
| RC1-7283-000CN |
Bushing - Located on the gear plate next to the cam and the 133-tooth gear |
| RC1-7284-020CN |
Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
