Part |
Picture |
Description |
RC1-9309-000CN |
Scanner fan duct - Directs air into scanner area |
RC1-9312-000CN |
Cable guide ´D´ |
RC1-9313-000CN |
Air filter - Located on the upper right side of the printer behind the upper right cover |
RC1-9318-000CN |
Cable guide ´E´ |
RC1-9323-000CN |
Cable guide ´F´ |
RC1-9324-000CN |
Environment sensor holder - Holds the humidity sensor unit |
RC1-9326-000CN |
HVT-A (high-voltage transmission) guard plate |
RC1-9328-000CN |
High voltage connector holder - Located on the left side of the printer chassis - Attaches behind the main switch cover |
RC1-9329-000CN |
Cable guide - Cover for the panel cable |
RC1-9332-000CN |
Fuser cable guide - Located on the fuser power supply assembly |
RC1-9334-000CN |
Duct, scanner for HP HP Color LaserJet CP6015 Printer |
RC1-9336-000CN |
Left cover assembly - Plastic cover that protects the left side of the printer |
RC1-9339-000CN |
Right upper cover - Located on top of the right door assembly |
RC1-9340-000CN |
Cover, face-down Face down cover - Output paper cover on top of the printer - Holds the paper after it has been printed |
RC1-9341-000CN |
Control panel support cover assembly - Includes the base structure, and control panel support piece - Mounts to the top of the ADF assembly - Does NOT include the control panel |
RC1-9342-000CN |
Rear upper cover - Plastic cover that protects the upper rear part of the printer |
RC1-9344-000CN |
Left rear cover - Plastic cover that protects the left rear part of the printer - Corner cover with slot for I/O connectors |
RC1-9348-000CN |
Cover, internal, right |
RC1-9348-020CN |
Internal right cover |
RC1-9350-000CN |
Upper front cover - Large rectangle shaped plastic cover located on left side on the top of the printer |
RC1-9351-000CN |
Paper delivery cover |
RC1-9354-000CN |
Reinforcement block - Used for the simplex models only |
RC1-9360-000CN |
Cover, face-down drive |
RC1-9362-000CN |
Cover, blanking |
RC1-9511-000CN |
Cover, motor for HP HP Color LaserJet CP6015 Printer |
RC1-9607-000CN |
Hold guide plate - Located on the left side of the lower guide assembly |
RC1-9620-000CN |
Flange pulley - Attaches to the paper feed cogged belt located on the intermediate feed main body assembly |
RC1-9649-000CN |
Blanking cover - Located next to the four bushings on the drive frame |
RC1-9666-000CN |
Back cover - Located on top of the shield plate on the intermediante feed main body |
RC1-9667-000CN |
Intermediate feed switch cover |
RC1-9674-000CN |
Paper feed cogged belt |
RC1-9687-000CN |
Blanking sheet - Mounts on the shield plate |
RC1-9688-000CN |
Cable guide - Located next to the paper feed cogged belt on the intermediate feed main body |
RC1-9695-000CN |
Assist arm cap plate - Located on the upper guide assembly |
RC1-9703-000CN |
Rear mount cover plate assembly |
RC1-9705-000CN |
Left cover assist - Located on the lower guide assembly |
RC1-9706-000CN |
Right cover assist - Located on the lower guide assembly |
RC1-9719-000CN |
Clean out access door - Left side door that provides access to paper jams |
RC1-9871-000CN |
1 x 500-sheet paper input tray rear cover |
RC1-9872-000CN |
1 x 500-sheet paper input tray left cover |
RC1-9873-000CN |
1 x 500-sheet paper input tray upper front cover |
RC1-9874-000CN |
1 x 500-sheet paper input tray lower right cover |
RC1-9881-000CN |
1 x 500-sheet input tray paper feed roller guide |
RC1-9882-000CN |
Stopper, right door |
RC1-9883-000CN |
Lock lever - This is the rear cover lock for the 1 x 500-sheet paper input tray |
RC1-9884-000CN |
1 x 500-sheet paper input tray tape door |
RC1-9896-000CN |
Double lock front caster - For the 1 x 500-sheet paper input tray |
RC1-9900-000CN |
Lock shaft support - Located on the 1 x 500-sheet paper input tray |
RC1-9901-000CN |
Switch cover plate - For the 1 x 500-sheet paper input tray door open detection switch (SW103) |
RC1-9912-000CN |
Lock shaft - For the 1 x 500-sheet paper input tray |
RC1-9913-000CN |
Lock arm - For the 1 x 500-sheet paper input tray - Mounts on the lock shaft |
RC1-9915-000CN |
Bushing - Mounts on the lock shaft next to the arm lock on the 1 x 500-sheet paper input tray |
RC1-9917-000CN |
Stationary rear caster - Mounts on the bottom frame of the 500-sheet high capacity input (HCI) paper feeder assembly |
RC1-9921-000CN |
Stock door - For 1 x 500-sheet paper input tray |
RC2-0215-000CN |
Left paper retainer arm for fusing assembly |
RC2-0216-000CN |
Right paper retainer arm for fusing assembly |
RC2-0253-000CN |
Left side paper retainer arm for Fuser Assembly |
RC2-0254-000CN |
Right side paper retainer arm for Fuser Assembly |
RC2-0269-000CN |
Center paper retainer arm for fusing assembly |
RC2-1278-000CN |
Rear cover - Plastic cover that protects the rear part of the stapler/stacker unit |
RC2-1279-000CN |
Connector tray cover - Mounts on the upper left side of the rear cover on the stapler/stacker unit |
RC2-1280-000CN |
Lower left cover - Mounts on the saddle tray assembly |
RC2-1283-000CN |
Upper height panel - Located on the stapler/stacker unit |
RC2-1284-000CN |
Side wall guide - Mounts on the upper height panel on the booklet maker unit |
RC2-1293-000CN |
Paper delivery gate arm |
RC2-1315-000CN |
Caster - Used on pedestal assembly (universal) |
RC2-1347-000CN |
Slide cover - Plastic cover that slide in to the upper height panel on the stapler/stacker unit |
RC2-1351-000CN |
Lower internal cover (stapler/stacker only) |
RC2-1356-000CN |
Grounding plate - Located on the rear left side of the saddle assembly |
RC2-1663-000CN |
Cover, upper, right |
RC2-1664-000CN |
Cover, upper, left |
RC2-1665-000CN |
Cable cover - Protects the flex cable that connects the scanner with the mother board |
RC2-1671-000CN |
TRAY, FACE-UP Face up tray assembly - Drop down output tray |
RC2-1672-000CN |
Face down paper output cover - Clear jams from trays - Serves as the rear of the tray for the face-up output tray on top of the printer |
RC2-1687-000CN |
Rear plate - Rear cover that protects the back side of the printer |
RC2-1691-000CN |
Left cover - Protects the left side of the paper cassette |
RC2-1692-000CN |
Right cover - Protects the right side of the paper cassette |
RC2-1734-000CN |
LED window - Mounts on the upper left side on the rear cover assembly of the stapler/stacker unit |
RC2-1776-000CN |
Cover, fmtr, lower |
RC2-1786-000CN |
Front door assembly - For the Color LaserJet CP1210 series printer |
RC2-1788-000CN |
Right side cover assembly - For the Color LaserJet CP1210 series printer |
RC2-1789-000CN |
Left side cover assembly - For the Color LaserJet CP1210 series printer |
RC2-1790-000CN |
Lower rear cover - Located below the rear door - For the Color LaserJet CP1210 series printer |
RC2-1791-000CN |
Upper rear cover - Located above the rear door assembly - For the Color LaserJet CP1210 series printer |
RC2-1797-000CN |
Right side cover assembly - For the Color LaserJet CP1510 series printer |
RC2-1798-000CN |
DIMM memory module cover - For the Color LaserJet CP1510 series printer |
RC2-1820-000CN |
Guide, cable, b |
RC2-1869-000CN |
Cam, front door, left |
RC2-1870-000CN |
Cam, front door, right |
RC2-1871-000CN |
Lever, rail, left |
RC2-1872-000CN |
Lever,rail, right |
RC2-1878-000CN |
Front left cassette rail assembly - For the Color LaserJet CP1210/CP1510 series printer |
RC2-2005-000CN |
Cleanout assembly door - Front access door that provides access to paper jams - For the Color LaserJet CP1210 series printer |
RC2-2014-000CN |
Cover holder - Located below the separation roller - For the Color LaserJet CP1210/CP1510 series printer |
RC2-2115-000CN |
Rear door assembly - For the Color LaserJet CP1210 series printer |
RC2-2633-000CN |
Screw M 4x5 |
RC2-2875-000CN |
Center rear cover - Located to the left of the rear door assembly - For the Color LaserJet CP1210 series printer |
RC2-2916-000CN |
Photo card cover - For the Color LaserJet CP1515ni series printer |
RC2-2919-000CN |
Cover, low voltage front |
RC2-3073-000CN |
Left side cover assembly - For the Color LaserJet CP1510 series printer |
RC2-3074-000CN |
Lower rear cover - Located below the rear door - For the Color LaserJet CP1510 series printer |
RC2-3075-000CN |
Upper rear cover - Located above the rear door assembly - For the Color LaserJet CP1510 series printer |
RC2-3076-000CN |
Center rear cover - Located to the left of the rear door assembly - For the Color LaserJet CP1510 series printer |
RC2-3077-000CN |
Rear door assembly - For the Color LaserJet CP1510 series printer |
RC2-3097-000CN |
Photo card cover - For the Color LaserJet CP1515n series printer |
RC2-3098-000CN |
Light guide - For the Color LaserJet CP1510 series printer |
RC2-3108-000CN |
Left side cartridge tray clamp - For the Color LaserJet CP1210/CP1510 series printer |
RC2-3109-000CN |
Right side cartridge tray clamp - For the Color LaserJet CP1210/CP1510 series printer |
RC2-3598-000CN |
Rear door stopper |
RC2-3599-000CN |
Cap link - For Color LaserJet printers |
RC2-3604-000CN |
Rear door assembly - For Color LaserJet printers |