Part |
Picture |
Description |
RG5-6391-110CN |
DC controller PC board |
RG5-6392-000CN |
Paper pickup sensor PC Board - Small board with four sensors on right side of bottom paper pickup assembly |
RG5-6393-000CN |
Toner sensor PC Board - Small vertical board on right side of toner cartridges |
RG5-6394-000CN |
LED PC Board - The LED PC Board assembly that performs the function called primary exposure - Erases the latent image off each drum in drum drive assembly |
RG5-6395-000CN |
High voltage power supply PC Board |
RG5-6396-000CN |
Memory controller PC Board - Between DC controller and toner antenna |
RG5-6399-030CN |
Fuser power supply PC Board - 100/127 volts |
RG5-6400-050CN |
Fuser power supply PC Board - 220/240 volt |
RG5-6410-000CN |
Low Voltage power supply for hp color laserJets |
RG5-6410-020CN |
Low voltage power supply PC Board - 100/127 VAC 60Hz |
RG5-6411-020CN |
Low voltage power supply PC Board - 220/240VAC |
RG5-6413-000CN |
Left plate cable |
RG5-6414-000CN |
Relay cable - Connects DC controller to HVPS, interlock switch to DC controller, and Fuser circuit to DC controller |
RG5-6415-000CN |
DC Cable - DC power supply cable |
RG5-6418-000CN |
Antenna cable - Between toner cartridge memory tag and antenna memory PC board - Four used |
RG5-6419-000CN |
Paper feeder main cable |
RG5-6422-000CN |
Intraface cable - Connects Formatter board to DC controller board and LVPS to Formatter board |
RG5-6423-000CN |
Sensor cable - Cable for PS12 fuser delivery and PS13 output bin full |
RG5-6425-000CN |
Fuser drawer fusing cable |
RG5-6427-000CN |
AC Cable - Connects AC power supply to fuser power supply - 110 volt AC |
RG5-6430-000CN |
Optional feeder and cassette size cable/connector |
RG5-6431-000CN |
Cable - Cassette size cable |
RG5-6432-040CN |
Control panel assembly - 100/127 volt |
RG5-6432-070CN |
Control panel assembly - 100/127 volt |
RG5-6433-040CN |
Control panel assembly - 220/240volt |
RG5-6433-070CN |
Control panel assembly - 220/240volt |
RG5-6434-000CN |
AC Cable - Connects AC power supply to fuser power supply - 220 volt AC |
RG5-6446-000CN |
Top cover hinge assembly - Top cover damper assembly |
RG5-6449-020CN |
High voltage toner contact assembly - Electrical contacts for toner cartridge (Four used) |
RG5-6449-040CN |
High voltage toner contact assembly - Electrical contacts for toner cartridge (Four used) |
RG5-6450-000CN |
Cartridge inlet assembly - Black plastic piece on right front side |
RG5-6454-000CN |
Sensor assembly - Color registration detection assembly - Color sensor for DC controller |
RG5-6459-000CN |
Paper cassette frame - Left side Tray 2 support frame assembly |
RG5-6460-000CN |
Paper cassette frame - Right side Tray 2 support frame assembly |
RG5-6464-000CN |
Top cover assembly - Rear portion of printer top cover |
RG5-6465-000CN |
Top/front printer cover assembly - Lift-up front cover |
RG5-6466-000CN |
Lower front cover assembly - Front of printer that Tray 1 attaches to |
RG5-6467-000CN |
MP/Tray 1 assembly - Front drop-down Multipurpose/Tray 1 assembly |
RG5-6468-040CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
RG5-6469-000CN |
Paper pickup drive assembly - Tray 2 paper pickup drive assembly |
RG5-6474-000CN |
Drum ground assembly - Chassis to toner cartridge ground strap that goes across the large gear - Used on the black and yellow toner cartridges |
RG5-6475-000CN |
Drum ground assembly - Chassis to toner cartridge ground strap that goes across the large gear - Used on the mgenta and can toner cartridges |
RG5-6476-000CN |
Tay 2 cassette tray for hewlett packard color laserJet printer 4600 series units. |
RG5-6476-170CN |
Tray 2 paper cassette - This is the pull out paper holder assembly for tray 2 |
RG5-6484-070CN |
Image transfer kit - For HP Color LaserJet 4600 series - Electrostatic transfer belt (ETB) assembly |
RG5-6487-000CN |
Image transfer kit - For HP Color LaserJet 4600 series - Electrostatic transfer belt (ETB) assembly |
RG5-6487-040CN |
Image transfer kit - For HP Color LaserJet 4600 series - Electrostatic transfer belt (ETB) assembly |
RG5-6492-000CN |
Contact pin assembly |
RG5-6493-190CN |
Image fuser assembly - Bonds toner to paper with heat - For 100 to 127VAC operation |
RG5-6493-230CN |
Image fuser assembly - Bonds toner to paper with heat - For 100 to 127VAC operation |
RG5-6504-000CN |
Drum drive assembly - For magenta and cyan cartridges |
RG5-6505-000CN |
Drum drive assembly - For black cartridge |
RG5-6506-000CN |
Drum drive assembly - For yellow cartridge |
RG5-6507-020CN |
Developer disengagement drive assembly |
RG5-6510-000CN |
Control panel crossmember assembly - Supports control panel |
RG5-6510-020CN |
Control panel crossmember assembly - Supports control panel |
RG5-6512-000CN |
Fuser drive assembly for HP color laserjets |
RG5-6512-030CN |
Fuser drive assembly for HP color laserjet printers. |
RG5-6517-230CN |
Image fuser assembly - Bonds toner to paper with heat - For 220 to 240VAC operation |
RG5-6647-030CN |
Standard 500 sheet paper cassette only - Tray 2 paper cassette assembly - Includes all parts used in the paper tray cassette |
RG5-6647-150CN |
Standard 500 sheet paper cassette only - Tray 2 paper cassette assembly - Includes all parts used in the paper tray cassette |
RG5-6647-210CN |
Standard 500 sheet paper cassette only - Tray 2 paper cassette assembly - Includes all parts used in the paper tray cassette |
RG5-6661-070CN |
Paper pickup drive assembly - Gear assembly located on left side of paper pickup assembly |
RG5-6665-000CN |
500 sheet paper cassette lifter drive assembly |
RG5-6665-040CN |
500 sheet paper cassette lifter drive assembly |
RG5-6670-110CN |
Paper pickup assembly - Used for tray 2 |
RG5-6670-150CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
RG5-6670-170CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
RG5-6670-220CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
RG5-6672-000CN |
Lower left frame assembly - Left side support of paper input Tray 2 |
RG5-6672-040CN |
Lower left frame assembly - Left side support of paper input Tray 2 |
RG5-6672-070CN |
Lower left frame assembly - Left side support of paper input Tray 2 |
RG5-6673-000CN |
Lower right frame assembly - Right side support of paper input Tray 2 |
RG5-6673-030CN |
Lower right frame assembly - Right side support of paper input Tray 2 |
RG5-6675-000CN |
Tray 1/MP tray link arm assembly - Right side link arm assembly |
RG5-6676-000CN |
Lifter drive gear assembly - Lifter drive gear assembly for Tray 2 |
RG5-6688-000CN |
Sensor assembly - Color registration detection assembly - Color sensor for DC controller |
RG5-6688-080CN |
Sensor assembly - Color registration detection assembly - Color sensor for DC controller |
RG5-6696-110CN |
Color LaserJet 5500 series Image Transfer kit - Electrostatic transfer belt (ETB) assembly |
RG5-6701-000CN |
Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds the toner to the paper with heat |
RG5-6701-070CN |
Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds the toner to the paper with heat |
RG5-6701-210CN |
Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds the toner to the paper with heat |
RG5-6701-240CN |
Fuser Assembly - 220 volts Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation |
RG5-6701-310CN |
Fuser Assembly - 220 volts Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation |
RG5-6714-040CN |
Fuser drive assembly - Provides power to turn fuser assembly rollers |
RG5-6715-000CN |
Sensor and bracket assembly - Metal mounting bracket for the Bin Full (PS6) and Fuser Delivery (PS7) sensors |
RG5-6715-050CN |
Sensor and bracket assembly - Metal mounting bracket for the Bin Full (PS6) and Fuser Delivery (PS7) sensors |
RG5-6719-000CN |
Disengaging drive assembly - Provides power to disengage drum drive assemblies |
RG5-6719-050CN |
Disengaging drive assembly - Provides power to disengage drum drive assemblies |
RG5-6720-030CN |
Drum grounding assembly |
RG5-6720-040CN |
Drum grounding assembly |
RG5-6725-030CN |
High voltage toner contact assembly - Electrical contacts for toner cartridge - Four used |
RG5-6725-040CN |
High voltage toner contact assembly - Electrical contacts for toner cartridge - Four used |
RG5-6726-000CN |
Front right cartridge inlet assembly - Located in front of right side cartridge guides |
RG5-6726-030CN |
Front right cartridge inlet assembly - Located in front of right side cartridge guides |
RG5-6728-000CN |
Sensor assembly - Toner cartridge memory tag antenna - Four used |
RG5-6728-040CN |
Sensor assembly - Toner cartridge memory tag antenna - Four used |
RG5-6731-060CN |
Drum drive assembly for cyan and magenta toner cartridges |
RG5-6732-050CN |
Drum drive assembly for yellow toner cartridge |
RG5-6733-050CN |
Drum drive assembly for black toner cartridge |
RG5-6734-000CN |
Fuser drawer fusing cable and connector assembly - Includes conncector mount |
RG5-6736-000CN |
Laser/scanner assembly - Separate scanner used with each tonner cartridge |
RG5-6742-000CN |
Disengaging plate assembly - Developer disengaging assembly |
RG5-6748-080CN |
Paper pickup assembly - Includes the base structure with the paper pickup roller paper feed roller drive gears and paper sensors for tray 3 |
RG5-6748-120CN |
Paper pickup assembly - Includes the base structure with the paper pickup roller paper feed roller drive gears and paper sensors for tray 3 |
RG5-6753-050CN |
Lifter drive assembly |
RG5-6761-000CN |
Electromagnetic clutch assembly - For the 500-sheet paper feeder assembly |
RG5-6761-040CN |
Electromagnetic clutch assembly - For the 500-sheet paper feeder assembly |
RG5-6769-000CN |
Paper size detection assembly - Includes the housing, three sensor fingers, spring, and micro-switch assembly |
RG5-6769-020CN |
Paper size detection assembly - Includes the housing, three sensor fingers, spring, and micro-switch assembly |
RG5-6770-140CN |
500-sheet paper cassette assembly ONLY - Includes the paper tray assembly with the separation roller, paper width adjusters, rear paper stop, and drive gears. Cassette tray - 500 sheet - for the Optional Feeder Tray 3 - CLJ 5500 / 5550 series |