Part |
Picture |
Description |
RG5-6770-140CN |
500-sheet paper cassette assembly ONLY - Includes the paper tray assembly with the separation roller, paper width adjusters, rear paper stop, and drive gears. Cassette tray - 500 sheet - for the Optional Feeder Tray 3 - CLJ 5500 / 5550 series |
RG5-6770-180CN |
500-sheet paper cassette assembly only - Includes the paper tray assembly with the separation roller paper width adjusters rear paper stop and drive gears. Cassette tray - 500 sheet - for the Optional Feeder Tray 3 - CLJ 5500 / 5550 series |
RG5-6772-000CN |
Controller board - For the 500-sheet paper feeder assembly |
RG5-6777-120CN |
Front lower cover assembly - Front cover behind drop down front paper input tray |
RG5-6777-130CN |
Front lower cover assembly - Front cover behind drop down front paper input tray |
RG5-6778-060CN |
Front top cover assembly |
RG5-6778-080CN |
Front top cover assembly |
RG5-6778-090CN |
Front top cover assembly |
RG5-6779-000CN |
Rear top cover assembly |
RG5-6779-030CN |
Rear top cover assembly |
RG5-6780-070CN |
Multi-purpose tray assembly - Drop down front paper input tray |
RG5-6780-090CN |
Multi-purpose tray assembly - Drop down front paper input tray |
RG5-6781-000CN |
Control panel assembly - 100/127VAC |
RG5-6781-030CN |
Control panel assembly - Control buttons and display located on top front of printer - For 100-220 VAC - Does not include overlay |
RG5-6781-090CN |
Control panel assembly - Control buttons and display located on top front of printer - For 100-220 VAC - Does not include overlay |
RG5-6782-000CN |
Left side cover assembly |
RG5-6782-040CN |
Left side cover assembly |
RG5-6783-020CN |
Right side cover assembly |
RG5-6786-000CN |
Damper assembly - Top cover damper assembly |
RG5-6786-030CN |
Damper assembly - Top cover damper assembly |
RG5-6794-020CN |
Control panel assembly - 220/240volt |
RG5-6794-060CN |
Control panel assembly - For 220/240 VAC |
RG5-6800-000CN |
High voltage power supply PC Board |
RG5-6801-040CN |
Fuser power supply PC Board - 110-127 volt |
RG5-6802-000CN |
Fuser power supply PC Board - 220-240 volt |
RG5-6802-050CN |
Fuser power supply PC Board - 220/240 volt |
RG5-6803-000CN |
E-label memory controller PC Board |
RG5-6805-000CN |
Toner sensor PC Board |
RG5-6806-000CN |
Tray 1/Multi-purpose tray sensor PC Board |
RG5-6807-000CN |
Cassette sensor PC Board |
RG5-6808-060CN |
Power supply assembly - 100VAC to 127VAC |
RG5-6808-080CN |
Power supply assembly - 100VAC to 127VAC |
RG5-6808-090CN |
Power supply assembly - 100/127VAC |
RG5-6809-060CN |
Power supply assembly - 220VAC to 240VAC |
RG5-6809-070CN |
Power supply assembly - 220/240VAC |
RG5-6809-080CN |
Power supply assembly - 220/240VAC |
RG5-6815-000CN |
AC cable - Low voltage power supply (LVPS) to fuser power supply cable |
RG5-6816-000CN |
DC cable - From DC power supply to low voltage power supply (LVPS) |
RG5-6818-000CN |
Drum drive cable - From DC controller board to each drum drive assembly |
RG5-6820-000CN |
Fan cable - Connects fans FM2 and FM3 to DC Controller PC board |
RG5-6820-030CN |
Fan cable - Connects fans FM2 and FM3 to DC Controller PC board |
RG5-6821-000CN |
Paper size cable - From Tray 2 paper width and paper length sensors to DC controller board |
RG5-6821-020CN |
Paper size cable - From Tray 2 paper width and paper length sensors to DC controller board |
RG5-6823-000CN |
Upper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors |
RG5-6826-000CN |
DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
RG5-6826-040CN |
DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
RG5-6827-000CN |
Fuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors |
RG5-6827-020CN |
Fuser power supply cable - DC Controller board to fuser power supply - Ten purple wire cable and two white connectors |
RG5-6829-000CN |
Paper pickup assembly cable - From DC Controller board to paper pickup assembly |
RG5-6829-020CN |
Paper pickup assembly cable - From DC Controller board to paper pickup assembly |
RG5-6836-000CN |
Optional feeder cable - Tray 3/500 sheet tray to DC Controller board |
RG5-6836-030CN |
Optional feeder cable - Tray 3 - 500 sheet tray to DC Controller board |
RG5-6842-040CN |
Paper sensor flag in fuser assembly |
RG5-6844-000CN |
High voltage contact assembly - Spring loaded high voltage contact to media attachment roller of ETB |
RG5-6844-020CN |
High voltage contact assembly - Spring loaded high voltage contact to media attachment roller of ETB |
RG5-6845-000CN |
Static discharge assembly kit - Includes multi-language installation instructions |
RG5-6845-030CN |
Static discharge assembly kit - Includes multi-language installation instructions |
RG5-6845-070CN |
Static discharge assembly kit - Includes multi-language installation instructions |
RG5-6846-000CN |
Static discharge comb - Black plastic frame with plastic strip to dissipate static electricity |
RG5-6848-000cn |
FUSER ASM 110VFusing assembly - For 110 VAC - Bonds toner to paper with heat |
RG5-6848-150CN |
Fuser Assembly - For 110 to 120 VAC operation- Bonds the toner to the paper with heat |
RG5-6848-230CN |
Fuser Assembly - Bonds the toner to the paper with heat - For 110VAC to 127VAC operation Fuser Assembly - 110 volts Fuser Assembly - 110 volts HP LaserJet 5500 |
RG5-6848-300CN |
Fuser Assembly 110v - Bonds toner to paper with heat - For laserJet 5500 series |
RG5-6850-070CN |
DC controller PC board for Hewlett Packard Color Laserjet 5500 printer. |
RG5-6880-000CN |
Laser/scanner assembly |
RG5-6890-000CN |
Laser/scanner assembly |
RG5-6890-030CN |
Laser/scanner assembly |
RG5-6897-020CN |
Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear |
RG5-6898-000CN |
Pressure roller assembly - Plastic support frame with two small spring loaded rollers - Rolls against the rubber feed roller |
RG5-6899-000CN |
Separation pad assembly - Includes the metal pivoting support frame with the plastic snap-on separation pad assembly |
RG5-6899-020CN |
Separation pad assembly - Includes the metal pivoting support frame with the plastic snap-on separation pad assembly - For the cassette on the 500 sheet input tray assembly - Mounts in the paper cassette tray assembly |
RG5-6900-000CN |
Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly |
RG5-6902-000CN |
Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board) |
RG5-6903-000CN |
Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat |
RG5-6907-030CN |
Laser/scanner support assembly (sheet metal plate) |
RG5-6910-080CN |
Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables |
RG5-6911-000CN |
Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears |
RG5-6913-000CN |
Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |
RG5-6914-000CN |
Tray Assembly : 250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly |
RG5-6914-040CN |
250 sheet paper tray assembly - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly |
RG5-6915-030CN |
250 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front cover |
RG5-6919-000CN |
Right side frame/cover assembly (Quartz Gray) plastic - Includes the right side cover and paper tray guide, the cassette retainer spring, tray 3 connector, printer interface connector, and rubber feet |
RG5-6920-000CN |
500 sheet paper tray assembly (complete) - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly |
RG5-6921-000CN |
500 sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the blue plastic front cover |
RG5-6922-000CN |
Front Cover for the 500 sheet paper cassette tray (blue plastic) - Has molded in paper loading instructions and a 3 on the front |
RG5-6925-000CN |
Feed drive assembly - Includes the support frame, motor, gears, solenoid, and feed drive board |
RG5-6927-000CN |
Control panel assembly (mechanical only) - Includes the Rotate Carousel, Cancel Job and the Go buttons, plus the various indicator light pipes - All switches and LEDs are on the formatter PC board |
RG5-6929-000CN |
Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers |
RG5-6930-000CN |
Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear |
RG5-6931-000CN |
Face-up output tray assembly - Includes the pull-down door and Fuser Assembly locking bracket (Does NOT include the lock releases) |
RG5-6932-060CN |
Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) |
RG5-6932-070CN |
Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side |
RG5-6934-000CN |
Right rear side plate assembly - Includes the rear half of the metal right side plate, the Fuser Assembly drive motor and the three associated gears |
RG5-6935-000CN |
Left cartridge guide assembly |
RG5-6935-020CN |
Left cartridge guide assembly |
RG5-6936-000CN |
Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear |
RG5-6937-000CN |
Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender |
RG5-6938-000CN |
Gear assembly - Metal plate with two White plastic gears attached |
RG5-6938-030CN |
Gear assembly - Metal plate with two White plastic gears attached |
RG5-6939-000CN |
Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag |
RG5-6939-020CN |
Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag |
RG5-6940-050CN |
Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear |
RG5-6942-000CN |
Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges |
RG5-6942-030CN |
Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame |
RG5-6943-000CN |
Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft |
RG5-6943-020CN |
Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel |
RG5-6951-000CN |
Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1) |
RG5-6952-000CN |
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) |
RG5-6952-020CN |
Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly |
RG5-6953-000CN |
Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door |
RG5-6956-000CN |
E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board |