| Part |
Picture |
Description |
| RG5-7597-000CN |
Top cover assembly - Includes the rear cover with molded-in face-down output tray and the lift-up toner cartridge / imaging drum and transfer assembly cartridge access door - Does NOT include the upper front cover |
| RG5-7598-000CN |
Left side cover assembly - Includes the main cover, vent cover, power switch button, rod and spring (The power switch is located on the low voltage power supply board) |
| RG5-7599-000CN |
Right side cover assembly - Includes the right side cover, DIMM memory access door, and the formatter grounding plate |
| RG5-7601-000CN |
Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender |
| RG5-7602-000CN |
Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
| RG5-7602-070CN |
FIXING ASSY 110-127V Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover/face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
| RG5-7603-000CN |
Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation |
| RG5-7603-070CN |
Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation |
| RG5-7603-080CN |
Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover / face-up output tray - Bonds the toner to the paper with heat - For 220V to 240VAC operation |
| RG5-7604-000CN |
Rear cover / face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output |
| RG5-7604-010CN |
Rear cover/face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output |
| RG5-7606-000CN |
High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer |
| RG5-7607-000CN |
Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge |
| RG5-7609-000CN |
Carousel position and toner level photoelectric sensor PC board - L Shaped PC board with the two sensors |
| RG5-7611-030CN |
DC controller board |
| RG5-7612-000CN |
Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch |
| RG5-7613-000CN |
Registration sensor PC Board - Small board with flag activated photosensor |
| RG5-7615-000CN |
Feed drive board assembly - Mounts on the right side of the center frame assembly - For the base on the 500 sheet input tray assembly |
| RG5-7616-000CN |
Sub-high voltage board - Small auxillary PC board |
| RG5-7617-000CN |
Interconnecting feed drive PC board |
| RG5-7620-000CN |
Cable assembly (two 5-pin connectors) |
| RG5-7621-000CN |
Cable assembly (two 8-pin connectors) |
| RG5-7622-000CN |
Upper cable assembly (seven connectors) |
| RG5-7624-000CN |
Cable assembly (two 3-pin connectors) |
| RG5-7628-000CN |
Cable assembly for HP Color LaserJet 2500 Series |
| RG5-7629-060CN |
Feed drive assembly - Includes the support frame, motor, gears, solenoid, and feed drive board - Mounts on right side of the center frame assembly - For the base on the 500 sheet input tray assembly |
| RG5-7630-000CN |
Right scanner link assembly - Spring loaded arm - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridges and image drum/transfer assembly cartridge access |
| RG5-7631-000CN |
Right support assembly - Metal frame which supports the top mounted scanner and the camera (photo) memory interface board assembly - Also includes the scanner release button/lever |
| RG5-7632-000CN |
Left support assembly - Metal frame which supports the top mounted scanner |
| RG5-7634-000CN |
Right side support frame/cover assembly - Includes the frame/cover, printer interface connector, cable, feed drive PC board, and snap-on lid - For the base on the 250-sheet input tray assembly |
| RG5-7635-000CN |
250-sheet paper cassette tray assembly (complete) - Pull out cassette that the paper is loaded into - Does NOT include the paper feed base assembly |
| RG5-7637-000CN |
Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear |
| RG5-7639-000CN |
250-sheet cassette tray main body assembly - Includes the main structure frame, paper stops, lift plate, springs, and the separation pad assembly - Does NOT include the plastic front cover |
| RG5-7645-000CN |
Left scanner link assembly - Spring loaded arm - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridges and image drum/transfer assembly cartridge access |
| RG5-7646-000CN |
DC controller board |
| RG5-7646-030CN |
DC controller board - Mounts on the right side of the printer (Behind the formatter board assembly) |
| RG5-7647-000CN |
High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer |
| RG5-7648-000CN |
Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge |
| RG5-7681-000CN |
Laser/scanner assembly - Separate scanner used with each tonner cartridge |
| RG5-7681-030CN |
Laser/scanner assembly - Separate scanner used with each tonner cartridge |
| RG5-7681-060CN |
Laser/scanner assembly - Separate scanner used with each tonner cartridge |
| RG5-7684-000CN |
DC Controller board kit - Includes DC Controller board for HP Color LaserJet 5550 series printer. |
| RG5-7685-000CN |
Loop sensor PCB assembly |
| RG5-7686-000CN |
Environmental sensor cable - Temperature sensor cable |
| RG5-7686-020CN |
Environmental sensor cable - Temperature sensor cable |
| RG5-7687-000CN |
Upper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors |
| RG5-7687-020CN |
Upper crossmember cable - From DC Controller board to control panel, color registration detection unit, fuser motor (M5) and fuser sensors |
| RG5-7691-000CN |
Fuser Assembly - For 110V to 120VAC operation - Bonds the toner to the paper with heat -For use with HP LaserJet 5550 |
| RG5-7691-180CN |
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 120VAC operation |
| RG5-7691-200CN |
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 120VAC operation |
| RG5-7691-250CN |
Fuser Assembly - For 110V to 120VAC operation - Bonds the toner to the paper with heat -For use with HP LaserJet 5550 |
| RG5-7692-180CN |
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC/240VAC operation |
| RG5-7692-200CN |
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC/240VAC operation |
| RG5-7692-250CN |
LaserJet 5550 Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC/240VAC operation |
| RG5-7692-260CN |
Fuser Assembly : HP LaserJet 5550 Fuser Assembly - For 220 VAC / 240 VAC operation - Bonds the toner to the paper with heat |
| RG5-7699-000CN |
Fuser drive assembly - Provides power to turn fuser assembly rollers |
| RG5-7699-070CN |
Fuser drive assembly - Provides power to turn fuser assembly rollersFUSER DRIVE ASSEMBLY |
| RG5-7700-000CN |
Fuser drive assembly - Provides power to turn fuser assembly rollers |
| RG5-7700-070CN |
Fuser drive assembly - Provides power to turn fuser assembly rollers |
| RG5-7707-000CN |
Sensor flag asm |
| RG5-7709-060CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
| RG5-7709-160CN |
Paper pickup assembly - Tray 2 paper pickup assembly |
| RG5-7711-000CN |
Paper pickup drive assembly - Gear assembly located on left side of paper pickup assembly |
| RG5-7711-030CN |
Paper pickup drive assembly - Gear assembly located on left side of paper pickup assembly |
| RG5-7718-000CN |
Controller board - For the 500-sheet paper feeder assembly |
| RG5-7723-000CN |
Drum drive assembly for cyan and magenta toner cartridges |
| RG5-7723-050CN |
Drum drive assembly for cyan and magenta toner cartridges |
| RG5-7724-000CN |
Drum drive assembly for yellow toner cartridge |
| RG5-7724-050CN |
Drum drive assembly for yellow toner cartridge |
| RG5-7725-000CN |
Drum drive assembly for black toner cartridge |
| RG5-7725-050CN |
Drum drive assembly for black toner cartridge |
| RG5-7727-000CN |
Fuser drawer fusing cable and connector assembly - Includes conncector mount |
| RG5-7727-030CN |
Fuser drawer fusing cable and connector assembly - Includes conncector mount |
| RG5-7731-000CN |
Static emiminator assy |
| RG5-7731-040CN |
Static Emiminator assembly |
| RG5-7732-000CN |
Rear top cover assembly |
| RG5-7732-040CN |
Rear top cover assembly |
| RG5-7737-000CN |
Color LaserJet 5500 series Image Transfer kit - Electrostatic transfer belt (ETB) assembly |
| RG5-7737-110CN |
Color LaserJet 5500 series Image Transfer kit - Electrostatic transfer belt (ETB) assembly with cleaning cloth |
| RG5-7807-000CN |
Sensor assembly - Includes the support plate, number 3 document size sensor (PS4) and cable assembly - Mounts in the bottom of the scanner assembly toward the middle |
| RG5-7842-000CN |
Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears |
| RG5-7879-000CN |
Process cartridge PC Board - Image drum PC Board |
| RG5-7882-000CN |
CRG Driver PC Board assembly - Print Cartridge Drive Controller PC Board |
| RG5-7884-000CN |
Memory switch PC board assembly - Mounts on the rear of the toner cartridge drive assembly |
| RG5-7889-000CN |
Fuser sensor PC board - Mounts on a support bracket inside the print engine frame assembly |
| RG5-7892-000CN |
Regulator PC Board - Interlock power supply - Provides 24VDC to interlocks |
| RG5-7900-000CN |
Display panel assembly - Control panel on front top of printer |
| RG5-7901-000CN |
High voltage power supply assembly - Mounts on the upper rear of print engine frame |
| RG5-7902-000CN |
Connector PC Board - High voltage connector PC Board |
| RG5-7985-000CN |
High voltage power supply PC Board |
| RG5-7988-000CN |
Antenna PC Board - PC Board antenna for toner cartridge memory tag - Four used |
| RG5-7990-000CN |
E-label memory controller PC Board |
| RG5-7991-000CN |
Fuser power supply PC Board - 110-127 volt |
| RG5-7992-000CN |
Fuser power supply PC Board - 220-240 volt |
| RG5-7993-000CN |
Toner sensor PC Board |
| RG5-7994-000CN |
Tray 1/Multi-purpose tray sensor PC Board |
| RG5-7995-000CN |
Cassette sensor PC Board |
| RG5-8000-000CN |
Controller board - For the 500-sheet paper feeder assembly |
| RG5-8003-000CN |
Loop sensor PCB assembly |
| RG9-1495-000CN |
PEP (Product Enhancement Package) kit - Contains all service parts including transfer guide and instrucions for installation of this kit |
| RG9-1516-000CN |
500 Sheet paper cassette - Paper cassette used for Tray 2 and Tray 3 |
| RG9-1527-020CN |
ICL Arm kit - Includes stopper arm, E-Clip, tension spring and bushings |
| RG9-1529-000CN |
Pickup roller for multi-purpose tray/Tray 1 - Mounts in top/front of Tray 2 |
| RG9-1595-000CN |
Paper guide assembly before fuser - Rear portion of fuser entry paper guide assembly |
| RG9-1595-040CN |
Paper guide assembly before fuser - Rear portion of fuser entry paper guide assembly |
| RG9-1596-000CN |
Fuser front guide assembly - Front portion of fuser paper entry guide - Part of guide with blue handle |
| RG9-1596-020CN |
Fuser front guide assembly - Front portion of fuser paper entry guide - Part of guide with blue handle |
| RH2-5263-000CN |
Power cord (Gray) - 14 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) |
| RH2-5335-000CN |
Ribbon cable - Has two 32-pin (M) edge connectors - 3.7cm (1.5in) long |
| RH2-5400-000CN |
Laser cable - Flat ribbon cable |
| RH2-5456-000CN |
Ribbon cable - Connects between the ADF analog processor board (J301) in the ADF assembly and the scanner control board (J102) in the flatbed scanner assembly |
