Part |
Picture |
Description |
RH7-1628-000CN |
Fusing motor assembly - 24VDC motor mounted on a motor controller PC board |
RH7-1629-000CN |
Stepping motor - 24V DC |
RH7-1630-000CN |
Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) |
RH7-1632-000CN |
Cooling fan - Fan that cools the delivery unit and scanner area - FM2 |
RH7-1651-000CN |
Rotary motor assembly - (DCM703) Rotates the four color toner cartridges in the carousel to position one of them for printing |
RH7-1655-000CN |
Motor assembly for HP Color LaserJet 2500 Series |
RH7-5168-000CN |
Transfer belt electromagnetic clutch (CL4) |
RH7-5176-000CN |
Electromagnetic Clutch - CL2 - Engages ITB Lift Cam for Hewlett Packard Laserjet Printers. |
RH7-5176-060CN |
Electromagnetic clutch (CL2)for Hewlett Packard Laserjet Printers. |
RH7-5178-000CN |
Electromagnetic clutch (CL3) |
RH7-5180-000CN |
Electromagnetic clutch (CL4) |
RH7-5312-000CN |
24VDC solenoid assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pickup assembly towards the right |
RH7-5312-020CN |
Solenoid (24 VDC) assembly - Activates the paper feed shutter assembly - Mounts on the rear frame of the ADF paper pick-up assembly towards the right |
RH7-5319-000CN |
Paper pickup drive assembly solenoid - 2 used on pick up assembly, order is for 1pc. |
RH7-5329-000CN |
Electromagnetic clutch - Cassette pickup clutch in paper pickup drive assembly - CL1 |
RH7-5329-020CN |
Electromagnetic clutch - Cassette pickup clutch in paper pickup drive assembly - CL1 |
RH7-5330-000CN |
Paper pickup drive assembly solenoid - SL1 |
RH7-5330-020CN |
Paper pickup drive assembly solenoid - SL1 |
RH7-5335-000CN |
Electromagnetic clutch assembly (24VDC) - Electrical clutch between the clutch drive gear and shaft |
RH7-5337-000CN |
Solenoid assembly |
RH7-5338-000CN |
Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1) |
RH7-5340-000CN |
Solenoid assembly |
RH7-5341-000CN |
Solenoid assembly |
RH7-5347-000CN |
Solenoid assembly |
RH7-5366-000CN |
Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft |
RH7-5378-000CN |
Clutch electromagnetic HP Laserjet Cluth Assembly Magnetic. |
RH7-5383-000CN |
Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1) |
RH7-5384-000CN |
Solenoid assembly |
RH7-5385-000CN |
Solenoid assembly - Tray 3 (SL95) |
RH7-5389-000CN |
Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft |
RH7-6051-000CN |
Microswitch with lever activator |
RH7-7146-000CN |
Density photoelectric sensor PC board |
RH7-7149-000CN |
Thermistor for HP Color LaserJet 2500 Series |
RH7-7158-000CN |
Density photoelectric sensor PC board |
RH7-7159-000CN |
Thermistor for HP Color LaserJet 2820 Series |
RK2-0017-000CN |
Exhaust fan - Fan at upper right rear side of printer - FM1 |
RK2-0137-000CN |
Paper feed motor - Located on lower left front of main right side plate assembly - Motor M1 |
RK2-0138-000CN |
Delivery motor - Motor M2 |
RK2-0139-000CN |
Electric motor - Transfer roller engaging motor - Motor M5 |
RK2-0141-000CN |
Electromechanical solenoid |
RK2-0143-000CN |
Solenoid - Duplexer solenoid - SL5 |
RK2-0145-000CN |
Electromagnetic solenoid - Secondary transfer roller engaging solenoid - SL4 |
RK2-0150-000CN |
Microswitch - Front door open switch on top front left of printer - Switch SW1 |
RK2-0153-000CN |
Cooling fan - Fan FM1 - Located on upper left rear of printer |
RK2-0157-000CN |
Low Voltage power supply - Located on bottom left side of printer - 110 volt |
RK2-0158-000CN |
Low Voltage power supply - Located on bottom left side of printer - 220 volt |
RK2-0162-000CN |
Ribbon cable - Connects DC controller board to Formatter board |
RK2-0163-000CN |
TM FFC cable - Connects DC controller board to Memory controller board |
RK2-0164-000CN |
Laser scanner cable - Longer cable of the two cables that run from DC controller to lower PC board on Laser scanner assembly |
RK2-0165-000CN |
Laser scanner cable - Shorter cable from DC controller to upper board on Laser scanner assembly |
RK2-0176-000CN |
Developing engaging drive clutch - Clutch CL3 |
RK2-0179-000CN |
Ribbon cable - Connects DC controller board to Formatter board |
RK2-0247-000CN |
Electromagnetic clutch - Registration clutch - CL1 |
RK2-0270-000CN |
Tray 2 pick-up solenoid - Mounts on the paper pick-up drive assembly |
RK2-0280-000CN |
Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
RK2-0507-000CN |
Stapler mechanism |
RK2-0534-000CN |
Microswitch - Door open switch - SW501 |
RK2-0535-000CN |
Microswitch (SW2) |
RK2-0615-000CN |
Fuser drive motor - Provides rotational power for fuser roller - Motor M5 |
RK2-0616-000CN |
Electrostatic Transfer Belt (ETB) drive motor - Provides power to run ETB drive assembly - Motor M6 |
RK2-0618-000CN |
Stepper motor - Disengaging motor - Motor M8 |
RK2-0619-000CN |
Stepper motor - Fuser roller pressure release motor - Motor M6 |
RK2-0621-000CN |
Cooling fan - Used as cartridge area, fuser area and delivery area cooling fans - Fans FM5, FM6 and FM7 |
RK2-0622-000CN |
Fuser fan - Provides cooling for Fuser area - Fan FM1 |
RK2-0623-000CN |
Cooling fan - Sub power supply fan - Fan FM2 |
RK2-0624-000CN |
Paper pickup drive assembly solenoid |
RK2-0627-000CN |
Low voltage power supply board - 110 VAC |
RK2-0628-000CN |
Low voltage power supply board - 220 VAC |
RK2-0648-000CN |
Cooling fan - Duplexer unit cooling fan |
RK2-0802-000CN |
Flat cable - Ribbon cable that runs between Formatter PCB and paper scanner on top of printer |
RK2-0804-000CN |
Sensor microswitch - Senses when MP/Tray 1 paper pickup unit is installed |
RK2-0807-000CN |
Intermediate paper transfer unit (IPTU) front door switch |
RK2-0812-000CN |
Intermediate paper transfer unit (IPTU) stepper motor - Two used |
RK2-0816-000CN |
Flat cable connector - Ribbon cable connector for ribbon cable that runs between Formatter PCB and paper scanner on top of printer - 23 pin connector |
RK2-0937-000CN |
DC motor - Electrostatic Transfer Belt drive motor - Motor M5 - Simplex models only |
RK2-0939-000CN |
Paper pick up/feed motor - Located on lower right front of printer - Motor M4 |
RK2-0954-000CN |
Cooling fan - Provides cooling for printer |
RK2-0956-000CN |
PARTS replacement low voltage power supply board 110 to 127v ac input unit. |
RK2-0957-000CN |
Replacement for part RM1-4378-040CN Low voltage power supply board - 220 to 240VAC input |
RK2-0966-000CN |
Scanner cable - Long flat scanner cable |
RK2-0967-000CN |
Scanner cable - Short flat scanner cable |
RK2-0969-000CN |
Flat cable - Ribbon cable that connects the DC controller board to the Driver board - Flat drive cable 1 - Connector J1023 to J401 |
RK2-0970-000CN |
Flat cable - Ribbon cable that connects the DC controller board to the Driver board - Flat drive cable 2 - Connector J1022 to J201 |
RK2-0971-000CN |
Scanner cable - Long flat scanner cable |
RK2-0989-020CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3600 and 3800 series printers only |
RK2-0989-030CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3600 and 3800 series printers only |
RK2-0989-040CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3600/3800/CP3505 series printers only |
RK2-0996-020CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3000 series printers only |
RK2-0996-030CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3000 series printers only |
RK2-0996-040CN |
Control panel assembly - Control buttons and display on top front of printer - For Color LaserJet 3000 series printers only |
RK2-0997-000CN |
Developing disengagement stepping DC motor (M6) - Engages and disengages the developing unit - Used for the duplex models only |
RK2-1007-000CN |
LVPS Discharge Tool - RK2-1007-000CN |
RK2-1053-000CN |
Flexible flat cable - 21 pin connector |
RK2-1054-000CN |
21-pin flat flexible cable |
RK2-1055-000CN |
Flexible flat cable - 23 pin connector |
RK2-1056-000CN |
23-pin flat flexible cable |
RK2-1062-000CN |
DC stepper motor - Provides power for mechanical movement parts in 500 sheet feeder assembly - Located on right side of feeder assembly |
RK2-1067-000CN |
Duplexer fan - Cooling fan inside plastic cover of mechanical section of duplexer assembly |
RK2-1090-000CN |
Right fan (FM1) assembly |
RK2-1092-000CN |
Cooling Fan (Fm3) |
RK2-1096-000CN |
Solenoid - Located on right front side of printer chassis |
RK2-1171-000CN |
Flat cable - Connects formatter board to DC controller board |
RK2-1281-000CN |
Electromagnetic clutch (CL2) |
RK2-1284-000CN |
Rear cooling fan - 2-wire, 92mm x 92mm x 25mm, 12VDC, 0.30A (black) |
RK2-1285-000CN |
Front cooling fan - Mounts on the front part of the printer on top of the tray 3 - Does not include housing |
RK2-1320-000CN |
Intermediate paper transfer unit (IPTU) media feed motor (M201) |
RK2-1322-000CN |
Cooling fan (FM1) assembly |
RK2-1331-000CN |
Stepping motor - Main drive motor for the printer - Motor M1 |
RK2-1354-000CN |
Laser flexible flat cable - Connects the laser driver PCA through (J501B) connector and the DC controller PCA through (J127) connector |
RK2-1355-000CN |
Laser flexible flat cable - Connects to the laser driver PCA through (J501A) connector and the DC controller PCA through (J126) connector |
RK2-1356-000CN |
Flexible flat cable - Connects to the formatter board through the (J9001) connector and to the DC controller PCA through (J123) connector |