| Part |
Picture |
Description |
| CQ105-67017 |
ELECTRONICS BOX TOP COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67018 |
SMART ROLL-LOADING SYSTEM COVER - RIGHT AND LEFT SIDES |
| CQ105-67019 |
PREVENTIVE MAINTENANCE KIT ONE - INCLUDES THE SCAN-AXIS MOTOR, ENCODER STRIP, BELT ASSEMBLY, CARRIAGE ASSEMBLY WITHOUT PCA, AND CUTTER - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67020 |
DOOR ASSEMBLY KIT - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67021 |
RIGHT SIDE CONNECTOR COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67022 |
LEFT SIDE CONNECTOR COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67023 |
LEFT AND RIGHT SIDE REAR TRIM ASSEMBLY |
| CQ105-67024 |
WINDOW POSITION SENSOR |
| CQ105-67025 |
POWER COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67026 |
LEFT SIDE COVER ASSEMBLY - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67027 |
MULTI-ROLL DOOR ARMS - FOR DESIGNJET PRINTERS |
| CQ105-67028 |
DAMPER - FOR DESIGNJET PRINTERS |
| CQ105-67029 |
MULTI-ROLL DOOR SPRING - FOR DESIGNJET PRINTERS |
| CQ105-67030 |
CLEANOUT DOOR - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67031 |
RIGHT SIDE CLEANOUT DOOR FLANGE - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67032 |
ENTRY PLATEN ASSEMBLY - INCLUDES THE RIGHT SIDE SLIDER |
| CQ105-67033 |
ROLLER GUIDE WITH MAYLAR ASSEMBLY |
| CQ105-67034 |
LEFT SIDE SLIDER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67035 |
COMPLETE PINCHWHEEL ASSEMBLY - FOR DESIGNJET PRINTERS |
| CQ105-67036 |
LEFT SIDE TRIM ASSEMBLY |
| CQ105-67037 |
RIGHT SIDE TRIM ASSEMBLY |
| CQ105-67038 |
OUTPUT PLATEN - INCLUDES THREE MEDIA DEFLECTORS |
| CQ105-67039 |
HARD DISK DRIVE (HDD) - INCLUDES HOLDER AND SCREWS - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67040 |
OPTICAL MEDIA ADVANCE SENSOR (OMAS) CABLE |
| CQ105-67041 |
PREVENTIVE MAINTENANCE KIT TWO - INCLUDES THE AEROSOL FILTER, SERVICE STATION AEROSOL ASSEMBLY, INK ABSORBER, LINE SENSOR, AND ENCODER STRIP |
| CQ105-67042 |
SERVICE STATION ASSEMBLY AND CABLE - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67043 |
UPPER INK SUPPLY STATION (ISS) - INCLUDES THE CARTRIDGE TRAY - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67044 |
LOWER INK SUPPLY STATION (ISS) - INCLUDES THE CARTRIDGE TRAY |
| CQ105-67045 |
INK SUPPLY TUBES AND TRAILING CABLE - FOR THE DESIGNJET T7100 PRINTER 42INCH |
| CQ105-67046 |
TOP COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67048 |
RIGHT COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67049 |
ELECTRONICS BOX COVER - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67050 |
AIR PRESSURE SYSTEM (APS) ASSEMBLY - INCLUDES PUMP, HOLDER AND RELIEF VALVE - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67051 |
ELECTRONICS BOX CABLE KIT - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67052 |
RIGHT SIDE SERVICE STATION DOOR - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67053 |
DRIVE ROLLER ENCODER SENSOR - INCLUDES THE ENCODER STRIP |
| CQ105-67054 |
CARTRIDGE TRAYS - FOR THE DESIGNJET T7100 PRINTER |
| CQ105-67055 |
STAND AND LEG COVERS - BOTH RIGHT AND LEFT SIDES |
| CQ105-67056 |
PRINT MECHANISM PCA BOARD - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67057 |
3-INCH ADAPTER KIT - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67058 |
LEG COVER - LEFT AND RIGHT SIDE LEG COVERS |
| CQ105-67059 |
HARDWARE KIT - CONTAINS VARIOUS TOOLS AND SCREWS TO ASSEMBLE THE STAND ASSEMBLY |
| CQ105-67060 |
BIN ASSEMBLY - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ105-67061 |
EOLA PCA SERVICE KIT - THERE ARE 2 EOLA PCAS TO CONTROL 4 BRUSHLESS BLOWERS IN ORDER TO GENERATE THE REQUIRED VACUUM TO HOLD THE SUBSTRATE - ONE IS CONNECTED TO THE PRINT MECHANISM PCA (LEFT SIDE) AND THE OTHER TO THE MINI INTERCONNECT PCA (RIGHT SIDE) |
| CQ105-67063 |
DC HDD2.5 WITH HOLDER AND FORM;PART CQ105-67063 IS NO LONGER SUPPLIED. PLEASE ORDER THE REPLACEMENT, CQ105-67066 |
| CQ105-67064 |
PREVENTIVE MAINTENANCE KIT ASSEMBLY - INCLUDES REWINDER GEAR AND MOTOR, HUB SUPPORT AND ADAPTOR, PAPER FEED BAKE, MEDIA SENSOR, MEDIA AXIS MOTOR, DRIVE ROLLER ENCODER KIT, DRIVE ROLLER GEARS AND DRIVER ROLLER BRAKE KIT |
| CQ105-67065 |
DRAGON PRINTMECH PCA ES2 SERV |
| CQ105-67066 |
DC HDD2.5 WITH HOLDER AND FORMATTER |
| CQ105-67068 |
DC HDD/CABLE WITH HOLDER SERV WO BNST |
| CQ105A |
HP DESIGNJET T7100 PRINTER |
| CQ109-60044 |
HARD DISK DRIVE (HDD) 250GB SATA - FOR HP DESIGNJET PLOTTER Z6200 SERIES |
| CQ109-67001 |
SCAN-AXIS MOTOR ASSEMBLY - FOR 42-INCH PLOTTERS |
| CQ109-67002 |
MEDIA LEVER SENSOR |
| CQ109-67003 |
AEROSOL FAN ASSEMBLY |
| CQ109-67004 |
BELT AND TENSIONER ASSEMBLY - CARRIAGE BELT AND THE METAL TENSIONER FOR 42-INCH PLOTTERS / DESIGNJET. |
| CQ109-67005 |
FRONT PANEL ASSEMBLY - INCLUDES ALL CABLES AND THE FERRITE CORES |
| CQ109-67006 |
POWER SUPPLY UNIT (PSU) - FOR DESIGNJET PRINTERS. |
| CQ109-67007 |
SERVICE STATION CABLE - INCLUDES THE MAINTENANCE CARTRIDGE DOOR SENSOR |
| CQ109-67009 |
SPINDLE - FOR 42-INCH PLOTTERS |
| CQ109-67010 |
42-INCH. PREVENTIVE MAINTENANCE KIT ONE - INCLUDES THE SCAN-AXIS MOTOR ENCODER STRIP BELT ASSEMBLY AND CARRIAGE ASSEMBLY (WITHOUT PCA CUTTER AND ESP) FOR 60-IN PLOTTER ORDER (CQ111-67007). |
| CQ109-67011 |
CARRIAGE ASSEMBLY - DOES NOT INCLUDE THE CARRIAGE PCA OR THE ENCODER SENSOR |
| CQ109-67012 |
INTERCONNECT PCA BOARD - FOR THE DESIGNJET T7100 PRINTER SERIES |
| CQ109-67013 |
WINDOW POSITION SENSOR WINDOW POSITION SENSOR HP DESIGNJET D5800 Z6200 Z6600 Z6800 Z6810 |
| CQ109-67014 |
OPTICAL MEDIA ADVANCE SENSOR (OMAS) CONTROLLER CARD - FOR DESIGNJET PRINTERS |
| CQ109-67015 |
HARD DISK DRIVE (HDD) 250GB SATA - FOR HP DESIGNJET PLOTTER Z6200. |
| CQ109-67016 |
PRIMER ASSEMBLY - FOR DESIGNJET PRINTERS |
| CQ109-67017 |
PRIMER VALVE AND TUBES ASSEMBLY |
| CQ109-67018 |
EMBEDDED SPECTRO PHOTOMETER (ESP) ACTUATOR - FOR 42-INCH PLOTTERS |
| CQ109-67019 |
PREVENTIVE MAINTENANCE KIT TWO - INCLUDES THE AEROSOL FILTER, SERVICE STATION AEROSOL ASSEMBLY, INK INSORBER, LEFT SIDE SPITTOON, ESP ASSEMBLY, LINE SENOR, AND ENCODER STRIP |
| CQ109-67020 |
FORMATTER BOARD (MAIN PCA) - INCLUDES PROCESSOR, HEATSINK, AND FAN |
| CQ109-67021 |
SERVICE STATION ASSEMBLY AND CABLE |
| CQ109-67022 |
VACUUM FAN ASSEMBLY HEWLETT PACKARD DESIGNJET PLOTTER. |
| CQ109-67023 |
UPPER INK SUPPLY STATION - INCLUDES THE CARTRIDGE TRAY |
| CQ109-67024 |
LOWER INK SUPPLY STATION - INCLUDES THE CARTRIDGE TRAY |
| CQ109-67025 |
INK SUPPLY TUBES- INCLUDES THE TRAILING CABLE - FOR 42-INCH PLOTTERS |
| CQ109-67026 |
ELECTRONICS MODULE COVERS KIT |
| CQ109-67027 |
AIR PURIFIER SYSTEM (APS) ASSEMBLY - INCLUDES PUMP, HOLDER AND RELIEF VALVE - FOR 42-INCH PLOTTERS |
| CQ109-67028 |
PERIPHERAL COMPONENT INTERCONNECT (PCI) PCA - FOR 42 AND 60-INCH PLOTTERS |
| CQ109-67029 |
ELECTRONICS MODULE CABLES KIT - FOR 42-INCH PLOTTERS |
| CQ109-67030 |
ELECTRONICS BOX BASE - INCLUDES ELECTRONICS BOX COVER AND EIO COVER |
| CQ109-67031 |
RIGHT SIDE SERVICE STATION DOOR |
| CQ109-67032 |
CARTRIDGE TRAYS - FOR DESIGNJET PRINTERS |
| CQ109-67033 |
RIGHT CONNECTOR COVER - FOR DESIGNJET PRINTERS |
| CQ109-67034 |
CARRIAGE PCA BOARD - FOR DESIGNJET PRINTERS |
| CQ109-67035 |
PRINT MECHANISM PCA - FOR DESIGNJET PRINTERS |
| CQ109-67036 |
TAKE-UP REEL WITH MOTOR |
| CQ109-67037 |
REWINDER AND GEAR - FOR DESIGNJET PRINTERS |
| CQ109-67039 |
FOOT ASSEMBLY - FOR DESIGNJET PRINTERS |
| CQ109-67040 |
LEGS ASSEMBLY - FOR DESIGNJET PRINTER |
| CQ109-67041 |
WINDOW ASSEMBLY - FOR 42-INCH PLOTTERS |
| CQ109-67042 |
HP COATED SERVICE KIT |
| CQ109-67044 |
ENCRYPTED HARD DISK DRIVE (HDD) - INCLUDES THE FORMATTER - FOR USE WITH DESIGNJET Z6200 PRINTER |
| CQ109-67045 |
BROKEN BAG FIXING TOOL SERVICE PLOTTER 6 AND 8 INKS INCLUDED. |
| CQ109-67046 |
PSU MR ES2 SERV, POWER SUPPLY UNIT (PSU) - FOR DESIGNJET PRINTERS |
| CQ109-67047 |
PRINTMECH PCA ES2 SERV |
| CQ109-67048 |
FORMATTER PCA AND PROC AND HS |
| CQ109-67049 |
KHAN HDD2.5 WITH HOLDER AND FORMATTER |
| CQ109-67050 |
PSU MR ES2 SERV POWER SUPPLY UNIT. |
| CQ109-67051 |
HDD/CABLE/BRDIGEPCA WITH HOLDE WO BNST HARD DISK DRIVE (HDD)SATA FOR HP DESIGNJET PLOTTER Z6200. |
| CQ109-67052 |
KHAN HDD2.5 WITH HOLDER AND FO WO BNST |
| CQ109-67054 |
FORMATTER PCA WITH LESS NOISE FAN |
| CQ109A |
HP DESIGNJET Z6200 42-IN PHOTO PRODUCTION PRINTER |
| CQ111-67001 |
INK SUPPLY TUBES (ISS INK TUBES PCA) - INCLUDES THE TRAILING CABLE - FOR 60-INCH PLOTTERS. PLEASE NOTE: YOU MUST USE YOUR MACHINE'S ORIGINAL INK TUBE PCAS. |
| CQ111-67002 |
AIR PRESSURIZATION SYSTEM (APS) ASSEMBLY - INCLUDES PUMP, HOLDER AND RELIEF VALVE - FOR 60-INCH PLOTTERS |
| CQ111-67003 |
BELT AND TENSIONER ASSEMBLY - FOR 60-INCH PLOTTERS. BELT AND TENSIONER - WITH METALLIC AXIS PULLEY |
| CQ111-67004 |
WINDOW ASSEMBLY - FOR 60-INCH PLOTTERS |
| CQ111-67005 |
ELECTRONICS MODULE EXTENSION COVER - LOCATED BELOW THE REAR DOOR |
| CQ111-67006 |
SPINDLE - FOR 60-INCH PLOTTERS |
| CQ111-67007 |
60-INCH. PREVENTIVE MAINTENANCE KIT ONE - INCLUDES THE SCAN-AXIS MOTOR ENCODER STRIP BELT ASSEMBLY AND CARRIAGE ASSEMBLY (WITHOUT PCA CUTTER AND ESP) FOR 42-INCH PLOTTER ORDER (CQ109-67010). |
| CQ111-67008 |
ELECTRONICS MODULE CABLES KIT - FOR 60-INCH PLOTTERS |
| CQ111-67009 |
EMBEDDED SPECTRO PHOTOMETER (ESP) ACTUATOR - FOR 60-INCH PLOTTERS |
