| Part |
Picture |
Description |
| Q1252-69024 |
HP 40GB HARD DRIVE (INCLUDES AB POSTSCRIPT O.06.02 FIRMWARE) |
| Q1252-69030 |
HARD DRIVE - FOR THE DESIGNJET 5500 PS - INCLUDES FIRMWARE VERSION S.56.04 (FOR S.56.07 PS FW ORDER Q1252-69045 AND FOR SATA ORDER Q1252-60054). |
| Q1252-69034 |
Q1252-69034 |
| Q1252-69036 |
FEM+BSP.05.00.51 PS BTRM-RC |
| Q1252-69038 |
HARD DRIVE - FOR THE DESIGNJET 5500 PS - INCLUDES FIRMWARE VERSION S.56.04 (FOR S.56.07 PS FW ORDER Q1252-69045 AND FOR SATA ORDER Q1252-60054). |
| Q1252-69041 |
SVS HDD OEM FW O.56.04 PS-RC |
| Q1252-69045 |
SVC HDD PS - INCLUDES FIRMWARE VERSION S.56.07 HARD DRIVE ASSEMBLY W/POSTSCRIPT. HARD DRIVE - FOR THE DESIGNJET 5500 PS PATA 320GB. (FOR SATA HD ORDER Q1252-60054). |
| Q1252-69046 |
SVC HDD STORK+ OEM PS FW O.56. |
| Q1252A |
HP DESIGNJET 5500PS PRINTER (42 IN) |
| Q1252V |
HP DESIGNJET 5500UVPS PRINTER (42 IN) |
| Q1253-60011 |
HEATER ASSEMBLY |
| Q1253-60012 |
TOP COVER ASSEMBLY (BLACK) - 60-INCHES |
| Q1253-60017 |
TAKE-UP REEL DEFLECTOR - 60 INCHES |
| Q1253-60018 |
SHIELD KIT (EMC COVERS) |
| Q1253-60019 |
TRAILING CABLE KIT - INCLUDES TRAILING CABLE TRAILING CABLE CLIP COVER CAP TRAILING FERRITE AND SCREWS ON OEM ONLY. - FOR 60-INCH VERSION |
| Q1253-60021 |
CARRIAGE BELT - LONG BELT ATTACHED TO THE CARRIAGE 60 BELT SVCCARRIAGE BELT - 60-INCH - ATTACHES TO THE CARRIAGE |
| Q1253-60039 |
PINCHARM LIFT (CAM LEVER SHAFT) MECHANISM - INCLUDES CAM (LONG BAR), LINKAGE, LINKAGE SCREW, CAM LEVER ARM, CAM LINKAGE ROD AND SCREWS - FOR 60-INCH VERSION |
| Q1253-60040 |
CENTER PAPER GUIDE - FOR THE 60-INCH WIDE VERSION PLOTTER |
| Q1253-60041 |
DYE INK TUBES INCLUDES 6 INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE),6 SETUP PENS, INK LEAK DETECTOR SYSTEM COMPONENTS, CARRIER CLIP, ISS HOUSING FOAM - 60IN (152.4CM. UV INK ORDER Q1253-60042. |
| Q1253-60042 |
UV INK ASSY INCLUDES SIX INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS CARRIAGE CRANE AND INK SUPPLY STATION CRANE, SIX SETUP PENS, INK LEAK DETECTOR SYSTEM COMPONENTS,CARRIER CLIP,ISS HOUSING FOAM. 1.524M 60IN. DYE INK ASSY ORDER Q1253-60041. |
| Q1253-60043 |
HEATER ASSEMBLY - HELPS TO RAPIDLY DRY INK AFTER MEDIA LEAVES THE PLATEN ASSEMBLY (FOR THE 60IN WIDE VERSION PLOTTER) |
| Q1253-60044 |
SHIELD KIT (EMC COVERS) - SET OF 3 ELECTROMAGNETIC SHIELDS INSTALLED BEHIND AND BELOW THE ELECTRONICS MODULE BASE |
| Q1253-60061 |
CENTER PLATEN KIT - HAS MANY AIR HOLES FOR THE VACUUM SYSTEM - INCLUDES OVERDRIVE ROLLERS, OVERDRIVE GEAR, CARRIAGE HEIGHT TOOL AND SCREWS - FOR 60-INCH VERSION |
| Q1253-60066 |
CARRIAGE BELT - 60-INCH - ATTACHES TO THE CARRIAGE 60 BELT SVCCARRIAGE BELT - 60-INCH - ATTACHES TO THE CARRIAGE |
| Q1253-60067 |
CENTER PAPER GUIDE - FOR THE 60-INCH WIDE VERSION PLOTTER - LONG PAPER GUIDE INSTALLED ABOVE THE ENTRY ROLLER |
| Q1253-60305 |
CENTER PLATEN ASSEMBLY |
| Q1253-67801 |
TRAILING CABLE KIT - INCLUDES TRAILING CABLE ONLY; TRAILING CABLE CLIP COVER CAP TRAILING FERRITE AND SCREWS PROVIDED ON OEM ONLY. - FOR 60-INCH VERSION |
| Q1253A |
HP DESIGNJET 5500 PRINTER (60 IN) |
| Q1253V |
HP DESIGNJET 5500UV PRINTER (60 IN) |
| Q1254-60021 |
MACROINSTALLER.14 CD EFS MACROINSTALLER.14 CD EFSP (ORDER Q1254-60026) |
| Q1254-60022 |
MACROINSTALLER.14 CD EGI MACROINSTALLER.14 CD EGI (ORDER Q1254-60027) |
| Q1254-60024 |
ENGLISH\JAPANESE |
| Q1254-60025 |
ENGLISH/KOREAN FOR HP 32054F |
| Q1254-60026 |
MACROINSTALLER.14 CD EFSP |
| Q1254-60027 |
MACROINSTALLER.14 CD EGI |
| Q1254-60028 |
MACROINSTALLER.14 CD ECT |
| Q1254-60029 |
MACROINSTALLER.14 CD EJ |
| Q1254-60030 |
MACROINSTALLER.14 CD EK |
| Q1254A |
HP DESIGNJET 5500PS PRINTER (60 IN) |
| Q1254V |
HP DESIGNJET 5500UVPS PRINTER (60 IN) |
| Q1261-60001 |
FOR SCANNER POWER SUPPLY: POWER SUPPLY - 100-240VAC INPUT, 50/60HZ - INCLUDES POWER SUPPLY AND THE IC POWER FILTER, CONNECT YOUR EXISTING SWITCH AND PLOTTER CABLES TO THE POWER SUPPLY. FOR PRINTER POWER SUPPLY: ORDER C7769-60387. |
| Q1261-60002 |
MAIN LOGIC PC BOARD MAIN LOGIC PC BOARD CC800PS/815MFP |
| Q1261-60003 |
COPIER TOP COVER PANEL |
| Q1261-60004 |
COPIER LEFT COVER PANEL |
| Q1261-60005 |
COPIER RIGHT COVER PANEL |
| Q1261-60006 |
COPIER REAR COVER PANEL |
| Q1261-60007 |
TOP PROFILE COVER PANEL |
| Q1261-60008 |
STITCHING WIRE FOR HP HP DESIGNJET T1200 SERIES |
| Q1261-60009 |
COMPLETE COPIER STAND |
| Q1261-60010 |
GLASS PLATE FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60011 |
CAMERA DRIVE BOARD CAMERA DRIVE BOARD - FOR THE DESIGNJET 4200 AND 815MFP SCANNER |
| Q1261-60012 |
LAMP SENSOR FOR HP DESIGNJET 815 MFP |
| Q1261-60013 |
CAMERA PC BOARD - ATTACHES TO THE CAMERA IMAGING LENS (TWO USED) |
| Q1261-60014 |
CARD READER ASSEMBLY |
| Q1261-60015 |
INTERFACE BOARD |
| Q1261-60017 |
MEDIA SENSOR FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60018 |
STEPPER MOTOR ASSEMBLY |
| Q1261-60019 |
Q1261-60019 |
| Q1261-60020 |
FAN ASSEMBLY FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60021 |
THICKNESS SENSOR |
| Q1261-60023 |
MIRROR CHASSIS FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60025 |
MEDIA FEED ROLLER |
| Q1261-60026 |
WHITE BACKROUND STRIP (WHITE BACKING. AY) - PLASTIC ITEM USED TO CALIBRATE THE SCANNER ASSEMBLY AND APPLIES PRESSURE TO THE TOP OF THE DOCUMENTS. HP WHITE BACKGROUND STRIP FOR 815MFP & 800PS SCANNERS |
| Q1261-60027 |
FLUORESCENT LAMP FOR HP DESIGNJET PRINTERS. LAMP ONLY. (SALES IS LIMITED SUPPLY ONLY FOR LIMITED TIME). |
| Q1261-60028 |
GUIDE PLATE FOR HP DESIGNJET COPIER CC800PS, HP DESIGNJET 815MFP, 4200 SCANNER GUIDE PLATE WITH WHITE STRIPE. |
| Q1261-60029 |
DRIVE BELT FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60030 |
DESIGNJET COPIER CC800PS NAMEPLATE |
| Q1261-60031 |
REFLECTOR ASSEMBLY |
| Q1261-60032 |
SMART CARD FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60033 |
MEDIA DETECTOR WIRES |
| Q1261-60034 |
CAMERA IMAGING LENS |
| Q1261-60035 |
ROLLER SHIELD FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60036 |
PAPER GUIDE FOR HP DESIGNJET COPIER CC800PS |
| Q1261-60039 |
HARNESS SV FOR HP DESIGNJET 5500MFP SERIES |
| Q1261-60042 |
A2 SCAN COVER FOR HP HP DESIGNJET T1200 SERIES |
| Q1261-60043 |
DUSTCOVER 40 FOR HP DESIGNJET 5500MFP SERIES |
| Q1261-60044 |
STYLUS - FOR THE DESIGNJET T1100 MFP, 4500MFP, 4500 SCANNER, 820 MFP PRINTER SERIES |
| Q1261-60045 |
SMART CARD - ALLOWS AUTHORIZED USERS TO GAIN ACCESS TO THE COPIER |
| Q1261-60046 |
CARD READER ASSEMBLY - ACCEPTS THE SMART CARD FROM AUTHORIZED USERS |
| Q1261-60052 |
CAMERA DRIVE MOTOR |
| Q1261-60059 |
CAMERA PC BOARD - ATTACHES TO THE CAMERA IMAGING LENS (TWO USED) |
| Q1261-60060 |
MAINTENANCE KIT - INCLUDES 40-INCH GLASS PLATE, WHITE BACKGROUND BOARD, SUPPORT STRIP, FLUORESCENT LAMP ASSEMBLY. - LIMITED SUPPLY - |
| Q1261-60062 |
TOUCH SCREEN MONITOR |
| Q1261-69062 |
TOUCH SCREEN MONITOR |
| Q1262A |
HP DESIGNJET CC800PS COPIER |
| Q1264A |
DESIGNJET 100 SERIES SPINDLE ACCESSORY - JAPAN ONLY |
| Q1271-40425 |
HP DESIGNJET BLACK SPINDLE HUB CAP FOR SPINDLE UNIT; MODELS T120 T520 T770 T790 T610 T620 T1100 Z6100 |
| Q1271-60160 |
CPU FAN ASSEMBLY, CPU FAN - HP Z6100 4000 4020 4500 4520 DESIGNJET PRINTER |
| Q1271-60167 |
42-INCH SPINDLE FOR HEWLETT PACKARD PLOTTER / DESIGNJET - DOES NOT INCLUDE THE BLUE HUB C6090-60105. |
| Q1271-60170 |
RM2 DRAWER SWITCH SERV |
| Q1271-60171 |
FINGER BOTTOM LEFT + RETAINER |
| Q1271-60175 |
BASKET ASSEMBLY - FOR DESIGNJET 4500 SERIES PRINTERSBASKET ASSY SERVICE |
| Q1271-60183 |
LEG ASSY SERVICE |
| Q1271-60184 |
PINCWHEEL ASSY MR SERV COMPLETE PINCHWHEELS ASSEMBLY - FOR THE DESIGNJET 4500 PRINTER SERIES |
| Q1271-60185 |
PINCHWHEELS KIT - FOR THE DESIGNJET T7100 PRINTER SERIES. HP DESIGNJET T7100 T7200 4000 4020 4500 PS 4520. |
| Q1271-60215 |
HP DESIGNJET 4000PS SERIES FRONT CONTROL PANEL. |
| Q1271-60226 |
PRINTMECH PC BOARD - CONTROLS THE FUNTION OF THE PRINT MECHANISM |
| Q1271-60378 |
160GB HARD DISK DRIVE (SATA)- FOR HEWLETT-PACKARD DESIGNJET PLOTTERS. (PATA PART NUMBER IS Q1273-69281). |
| Q1271-60420 |
GW MAINTENANCE KIT GENERIC |
| Q1271-60454 |
FOOT ASSEMBLY (INCLUDES CASTERS) - MOUNTS TO THE BOTTOM OF THE PRINTER STAND LEGS (TWO USED) |
| Q1271-60455 |
LEG ASSEMBLY - DOES NOT INCLUDE THE FOOT ASSEMBLY - SIDE SUPPORT FOR THE PRINTER (TWO USED) |
| Q1271-60456 |
CROSS-BRACE - BRACE THAT CONNECTS AND SUPPORTS THE TWO STAND LEGS |
| Q1271-60457 |
MEDIA BIN - WIRE RACK THAT MOUNTS TO THE PLOTTER STAND LEGS AND CROSS BRACE |
| Q1271-60458 |
HARDWARE KIT FOR PRINTER STAND - INCLUDES SCREWDRIVER AND SCREWS - USED TO ASSEMBLE PRINTER STAND |
| Q1271-60459 |
LEG COVER - COVERS BOTH THE LEFT AND RIGHT LEG ASSEMBLIES |
| Q1271-60611 |
REAR PAPER PATH ASSEMBLY - FOR THE DESIGNJET 4500 PRINTER SERIES |
| Q1271-60612 |
REFERENCE SHAFT WHEEL - FOR THE DESIGNJET 4500 PRINTER SERIES |
| Q1271-60613 |
MEDIA FEED MOTOR - FOR THE DESIGNJET 4500 PRINTER SERIES |
| Q1271-60614 |
LOCKING LEVERS - INCLUDES BOTH LEFT AND RIGHT LEVERS |
| Q1271-60615 |
PAPER LOAD LEVER - FOR THE DESIGNJET 4500 PRINTER SERIES |
| Q1271-60617 |
BT ARM ENCODER AND PAPER LOAD LEVER SWITCH KIT - FOR THE DESIGNJET 4500 PRINTER SERIES |
