| Part |
Picture |
Description |
| Q1279-60011 |
KEYBOARD (CHINESE) |
| Q1279-60012 |
KEYBOARD (TAIWANESE) |
| Q1279-60013 |
KEYBOARD (JAPANESE) |
| Q1279-60015 |
KEYBOARD BRASILIAN |
| Q1279-60045 |
REPLACEMENT FOR PART Q1279-60005 KEYBOARD ENGLISH SV ORDER Q1277-60045 |
| Q1279A |
HP DESIGNJET 815MFP |
| Q1280-60002 |
STAND (SHORT) SV |
| Q1280-60003 |
DESIGNJET SCANNER 4200 NAMEPLATE |
| Q1280-60004 |
REAR COVER SV FOR HP DESIGNJET 5500MFP SERIES |
| Q1280A |
HP DESIGNJET 4200 SCANNER |
| Q1281A |
POSTSCRIPT UPGRADE KIT FOR 1050C PLUS - INCLUDES POSTSCRIPT ROM SIMM, DRIVER SOFTWARE, AND DOCUMENTATION |
| Q1282A |
64MB SDRAM DIMM MEMORY FOR THE DESIGNJET 1000 PLUS SERIES |
| Q1283A |
128MB SDRAM DIMM MEMORY FOR THE DESIGNJET 1000 PLUS SERIES |
| Q1284A |
HEWLETT PACKARD (HP) - DYE BASE INK TUBES ASSEMBLY 42 INCHES. INK TUBES ASSEMBLY - INCLUDES 6 INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE), 6 SETUP PENS, INK LEAK DETECTOR SYSTEM, CARRIER CLIP & ISS. (FOR UV ORDER Q1251-60265). |
| Q1285A |
INK SYSTEM KIT FOR DYE-BASED INK - INK TUBES ASSEMBLY - INCLUDES 6 INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE) , 6 SETUP PENS, INK LEAK DETECTOR SYSTEM COMPONENTS, CARRIER CLIP, ISS HOUSING FOAM - 60IN (152.4CM). UV INK ORDER Q1253-60042. |
| Q1286A |
UV INK TUBES ASSEMBLY - INCLUDES SIX INK TUBES COMPLETE WITH HARDWARE ASSEMBLIES AT BOTH ENDS (CARRIAGE CRANE AND INK SUPPLY STATION CRANE), SIX SETUP PENS, INK LEAK DETECTOR SYSTEM COMPONENTS, CARRIER CLIP, ISS HOUSING FOAM. (FOR DYE BASE ORDER Q1251-60254). |
| Q1287A |
INK SYSTEM KIT FOR UV-RESISTANT INK - INCLUDES UV INK TUBES ASSEMBLY, 6 SETUP PENS, STORAGE BOX FOR 6 PRINTHEADS AND PRINTHEAD CLEANERS, FIRMWARE UPGRADE SOFTWARE ON CD-ROM ALSO INCLUDES ALL 6 INK CARTRIDGES |
| Q1292-60023 |
CONTROL PANEL - FRONT LEFT CONTROL PANEL |
| Q1292-60064 |
MEDIA CUTTER ASSEMBLY FOR HP DESIGNJET 100PLUS 110 120 130 30 70 90 CUTTER ASSEMBLY. |
| Q1292-60097 |
PAPER INPUT TRAY ASSEMBLY - HOLDS PAPER SUPPLY FOR PRINTER |
| Q1292-60122 |
CONTROL PANEL - FRONT LEFT CONTROL PANEL |
| Q1292-60150 |
OOPS SENSOR AND CONNECTOR ARE INCLUDED. OUT-OF-PAPER SENSOR (OOPS) - DETECTS WHEN PAPER SUPPLY IS EMPTY |
| Q1292-60152 |
ENCODER STRIP HOLDER - WIRE LOOP THAT CONNECTS TO THE CARRIAGE ASSEMBLY THAT IS USED TO HOLD THE ENCODER STRIP |
| Q1292-60202 |
CARRIAGE ASSEMBLY - INCLUDES TRAILING CABLE AND CARRIAGE BELT AND DOES NOT INCLUDE THE CARRIAGE HEIGHT TOOL |
| Q1292-60203 |
ELECTRONICS MODULE ASSEMBLY FOR HEWLETT PACKARD DESIGNJET PLOTTER. |
| Q1292-60204 |
PRINT ENGINE ASSEMBLY |
| Q1292-60205 |
DESIGNJET 130NR PRINT ENGINE ASSEMBLY |
| Q1292-60206 |
INK SUPPLY SERVICE STATION (ISS) ASSEMBLY 6 DRAIN HOLES AND 6 SPONGES. |
| Q1292-60207 |
CARRIAGE DRIVE MOTOR - DRIVES THE CARRIAGE BELT |
| Q1292-60208 |
CLEANOUT INTERCONNECT PCA |
| Q1292-60209 |
OOPS SENSOR AND CONNECTOR ARE INCLUDED. OUT-OF-PAPER SENSOR (OOPS) - DETECTS WHEN PAPER SUPPLY IS EMPTY |
| Q1292-60210 |
PICK ROLLER ASSEMBLY - PICKS MEDIA FROM THE INPUT PAPER TRAY AND FEEDS IT THROUGH THE PAPER PATH |
| Q1292-60211 |
FEED ROLLER ASSEMBLY - INCLUDES ENCODER DISK AND PAPER-AXIS MOTOR ASSEMBLY - FEEDS MEDIA UNDER THE CARRIAGE ASSEMBLY |
| Q1292-60215 |
CLEANOUT ASSEMBLY DOOR - D-SIZE PACKED - REAR ACCESS DOOR THAT PROVIDES ACCESS TO PAPER JAMS |
| Q1292-60218 |
PAPER MOTOR ASSEMBLY |
| Q1292-60219 |
RAMP MOTOR ASSEMBLY |
| Q1292-60227 |
PRINT PLATEN - SURFACE THAT SUPPORTS PAPER DURING PRINTING |
| Q1292-60235 |
RIDS ASSEMBLY - TRANSPORTS INK FROM THE INK SUPPLY STATION TO THE PRINTHEADS |
| Q1292-60238 |
ROLLFEED HARNESS SUP KIT ROHS SVROLLFEED SUPPORT BRACKET - USED IN CONJUNCTION WITH THE AUTOMATIC ROLLFEED KIT. ( FOR AUTOMATIC ROLLFEED KIT Q1247A). |
| Q1292-60258 |
BACK/CENTER COVER - COVERS THE BACK AND CENTER OF THE PRINTER AND IS LOCATED UNDER THE ACCESS DOOR |
| Q1292-60271 |
RIGHT COVER ASSEMBLY - HOUSES THE INK SUPPLY STATION AND SERVICE STATION |
| Q1292-60273 |
ELECTRONICS ENDCAP ROHS SV |
| Q1292-60274 |
PINCH ARM ASSY SV (SOLD INDIVIDUALLY) |
| Q1292-60283 |
CLEANOUT ASSEMBLY DOOR - D-SIZE PACKED - REAR ACCESS DOOR THAT PROVIDES ACCESS TO PAPER JAMS |
| Q1292-67001 |
OUTPUT BELT (1 PER) SVC OUTPUT BELT (1 PER) SVC |
| Q1292-67003 |
ENCODER STRIP - CLEAR STRIP WITH POSITION MARKS - USED BY THE SENSOR IN THE CARRIAGE ASSEMBLY TO DETERMINE POSITION |
| Q1292-67005 |
INK TUBE HOLDER |
| Q1292-67006 |
BELT TENSIONER SPRING |
| Q1292-67007 |
INK SERVICE STATION (ISS) BOTTOM ABSORBER FOAM - ABSORBS INK DURING THE CLEANING PROCESS - SMALLER OF THE TWO |
| Q1292-67008 |
ELECTRONICS ENDCAP ONE PER SVC |
| Q1292-67009 |
FILTER ASSEMBLY - LOCATED INSIDE THE RIGHT SIDE COVER |
| Q1292-67010 |
FRONT PANEL CABLE - CONNECTS THE FRONT PANEL TO THE MAIN LOGIC PC BOARD |
| Q1292-67011 |
INK SERVICE STATION (ISS) REAR ABSORBER FOAM |
| Q1292-67012 |
TURNAROUND ASSEMBLY |
| Q1292-67014 |
ENCODER HARNESS |
| Q1292-67015 |
UPPER PAPER GUIDE ROLLER - HELPS TO GUIDE MEDIA THROUGH PAPER PATH |
| Q1292-67016 |
DUPLEXER OUT OF PAPER SENSOR (OOPS) HARNESS |
| Q1292-67017 |
PICK CAM FOR HP DESIGNJET 100 SERIES UNITS, PICK CAM - LOCATED ON THE LEFT-SIDE OF THE PRINT MECHANISM. |
| Q1292-67018 |
LOWER PAPER GUIDE ROLLER KIT - HELPS TO GUIDE MEDIA THROUGH PAPER PATH |
| Q1292-67019 |
DISC-ENCODER ONE PER SVC PAPER MOTOR ENCODER DISK |
| Q1292-67020 |
PCA-CLEANOUT INTERCONNECT |
| Q1292-67021 |
CONTROL PANEL - FRONT LEFT CONTROL PANEL |
| Q1292-67022 |
DOOR SENSOR ASSEMBLY - SENSES WHEN THE ACCESS DOOR IS OPENED OR CLOSED |
| Q1292-67023 |
INNER PAPER GUIDE ONE PER SVCINNER PAPER GUIDE - GUIDES THE PAPER THROUGH THE PAPER PATH - MOUNTS BEHIND THE PICKUP ROLLER ASSEMBLY |
| Q1292-67026 |
CARRIAGE BELT - USED TO MOVE THE CARRIAGE FROM SIDE TO SIDE |
| Q1292-67029 |
MOTOR HARNESS ULY SVC KIT |
| Q1292-67032 |
CONTROL PANEL DISPLAY FOR DESIGNJET 30GP |
| Q1292-67033 |
POWER SUPPLY ROHS SV POWER SUPPLY ROHS SV WORLDWIDE INPUT POWER SUPPLY - 100-240VAC, 50/60HZ, 68W - INCLUDES FAN |
| Q1292-67034 |
ULYSSES DE MODULE ASSY ROHSS ELECTRONICS MODULE ASSEMBLY |
| Q1292-67037 |
CARRIAGE ASSY ULY D ROHS SV. CARRIAGE ASSY ULY D ROHS SVCARRIAGE ASSEMBLY - INCLUDES TRAILING CABLE AND CARRIAGE BELT AND DOES NOT INCLUDE THE CARRIAGE HEIGHT TOOL |
| Q1292-67038 |
POWER SUPPLY ROHS SV WORLDWIDE INPUT POWER SUPPLY - 100-240VAC 50/60HZ 68W - INCLUDES FAN. DOES NOT INCLUDE FORMATTER BOARD C7796-69156 |
| Q1292-67039 |
DISC-ENCODER ONE PER SVC PAPER MOTOR ENCODER DISK |
| Q1292-67040 |
CARRIAGE ASSY ULY D ROHS SV CARRIAGE ASSEMBLY - INCLUDES TRAILING CABLE AND CARRIAGE BELT AND DOES NOT INCLUDE THE CARRIAGE HEIGHT TOOL |
| Q1292-69166 |
ULYSSES D EMODULE ASSY SV ELECTRONICS MODULE ASSEMBLY |
| Q1292-69203 |
ELECTRONICS MODULE ASSEMBLY FOR HEWLETT PACKARD DESIGNJET PLOTTER. |
| Q1293-60046 |
INK CARTRIDGE CARRIAGE ASSEMBLY - INCLUDES CARRIAGE PC BOARD |
| Q1293-60047 |
CONTROL PANEL - FRONT LEFT CONTROL PANEL |
| Q1293-60048 |
MAIN LOGIC PCA MODULE - PCA IS HOUSED IN A METAL CHASSIS |
| Q1293-60049 |
INK SUPPLY SERVICE STATION (ISS) ASSEMBLY - FOR DESIGNJET 30/90/130 SERIES PRINTERS |
| Q1293-60050 |
DESIGNJET 30N PRINT ENGINE - BASIC PRINT MECHANISM - DOES NOT INCLUDE COVERS |
| Q1293-60051 |
DESIGNJET 30 PRINT ENGINE - BASIC PRINT MECHANISM - DOES NOT INCLUDE COVERS |
| Q1293-60052 |
INK SUPPLY SERVICE STATION (ISS) ASSEMBLY |
| Q1293-60053 |
POWER SUPPLY ROHS SV POWER SUPPLY ROHS SV WORLDWIDE INPUT POWER SUPPLY - 100-240VAC, 50/60HZ, 68W - INCLUDES FAN |
| Q1293-60054 |
DOOR SENSOR ASSEMBLY - SENSES WHEN THE ACCESS DOOR IS OPENED OR CLOSED |
| Q1293-60065 |
INK DELIVERY ASSEMBLY - TRANSPORTS INK FROM INK SUPPLY STATION TO CARRIAGE ASSEMBLY |
| Q1293-60066 |
UPPER PAPER GUIDE - SPRING LOADED FLAT PLATE |
| Q1293-60067 |
REAR CLEANOUT DOOR ASSEMBLY - PAPER JAM CLEANOUT DOOR |
| Q1293-60068 |
OUTPUT MECHANISM SUPPORT ASSEMBLY |
| Q1293-60080 |
CARRIAGE DRIVE MOTOR |
| Q1293-67001 |
MOTOR HARNESS B ONE PER SVC |
| Q1293-67002 |
ENCODER HARNESS |
| Q1293-67003 |
LEFT TRIM B ONE PER SVC |
| Q1293-67004 |
ENCODER STRIP - B-SIZE - CLEAR STRIP WITH POSITION MARKS - USED BY THE SENSOR IN THE CARRIAGE ASSEMBLY TO DETERMINE POSITION |
| Q1293-67005 |
CARRIAGE DRIVE BELT |
| Q1293-67006 |
ULY B EMODULE ASSY ROHS SV |
| Q1293-67007 |
INK CARTRIDGE CARRIAGE ASSEMBLY - INCLUDES CARRIAGE PC BOARD |
| Q1293-67808 |
UNKNOWN KEYWORD FOR DESIGNJET 30GP |
| Q1293-67809 |
FEED ROLLER ASSEMBLY - INCLUDES SHAFT WITH SIX ROLLERS, GEARS, AND ENCODER DISK - FEEDS THE MEDIA UNDER THE CARRIAGE ASSEMBLY |
| Q1293-67810 |
CARRIAGE ROD - THE CARRIAGE SLIDES ON THIS ROD |
| Q1293-69048 |
MAIN LOGIC PCA MODULE - PCA IS HOUSED IN A METAL CHASSIS |
| Q1293-69050 |
PRINT ENGINE 30N ROHS SV |
| Q1293-69085 |
MAIN LOGIC PCA MODULE |
| Q1396A |
PAPER FOR DESIGNJET 1055 SERIES, DESIGNJET 800 SERIES, DESIGNJET 130 SERIES, DESIGNJET 500. BOND PAPER - 24 INCH X 150. |
| Q1397A |
UNIVERSAL BOND PAPER - 91.4CM (36IN) X 30.5M (100FT) ROLL |
| Q1398A |
HEWLETT PACKARD SUPPLIES HP PAPER - BOND PAPER - ROLL (42 IN X 150 FT) - 80 G/M2 |
| Q1404A |
HEWLETT-PACKARD PAPER - COATED PAPER, COATED PAPER, MATTE - ROLL A1 (24 IN X 150 FT) - 95 G/M2 |
| Q1405A |
PAPER (COATED) FOR DESIGNJET 5000 SERIES, DESIGNJET 5100 SERIES, DESIGNJET 5500 SERIES, DESIGNJET COPIER CC800PS |
| Q1406A |
PAPER (COATED) FOR DESIGNJET 5000 SERIES, DESIGNJET 5100 SERIES, DESIGNJET 5500 SERIES, DESIGNJET COPIER CC800PS |
| Q1407A |
PAPER FOR DESIGNJET 800 SERIES, DESIGNJET 5000 SERIES, DESIGNJET 500 |
| Q1408A |
PAPER (COATED) FOR DESIGNJET 5100 SERIES, DESIGNJET 5500 SERIES, DESIGNJET 820 MFP SERIES, DESIGNJET 5000 SERIES |
| Q1412A |
PAPER (COATED) FOR DESIGNJET 2000, DESIGNJET 3000, DESIGNJET 1050 SERIES, DESIGNJET 1055 SERIES |
