| Part |
Picture |
Description |
| C2106-20003 |
Paper spring - Maintains upward pressure on pressure plate |
| C2106-40003 |
Print mechanism chassis assembly - The base structure of the print mechanism |
| C2106-40004 |
Output tray cover - Smoked plastic |
| C2106-40009 |
Follower for HP DeskJet 500K |
| C2106-40012 |
Carriage belt for HP DeskJet 500 Series |
| C2106-40020 |
Cartridge wiper - Wipes ink and debris from print nozzle |
| C2106-60001 |
Main Logic Board (Includes Firmware) |
| C2106-60002 |
C2106A DeskJet 500 printer owners manual kit |
| C2106-60011 |
Paper access cover assembly - Lift-up top/front cover |
| C2106-60040 |
Pressure plate - Lifts the stack of paper to be printed |
| C2106-60066 |
Sled assembly - Caps print cartridge when idle - Gray type for S/N 0000A00000 to 3211A99999, and S/N 0000S00000 to 3216S99999 |
| C2106-67902 |
Pinchwheel Kit - Includes 3 wheels and 3 retaining springs |
| C2106-67903 |
Ground plane - Fits into base under main logic board |
| C2106-69001 |
Main logic board (Includes firmware) |
| C2106-80002 |
Nameplate - C2106A DeskJet 500 printer logo |
| C2112-40002 |
Wiper bracket - Supports and positions the black wiper |
| C2113-20006 |
Carriage rod - Shaft that the carriage assembly rides on |
| C2113-60035 |
Carriage drive motor assembly - Includes ribbon cable |
| C2113-60069 |
Paper advance motor |
| C2114-20001 |
Idler shaft (New style) |
| C2114-40051 |
Interposer end effector rod - Interfaces between triggers and follower to initiate picking and kicking of paper |
| C2114-40052 |
Idler pulley with bearing - Mounts on idler shaft |
| C2128-40063 |
Rubber foot - Replacement rubber foot for the bottom of the printer (two used) |
| C2162-40002 |
Cluster gear for HP DeskJet 500 Series |
| C2162-60045 |
Driver software kit with 14 True Type fonts and ColorSmart driver, Version 5.0 - Kit includes two 3.5-inch disks and information guide - For Windows 3.1 (English) |
| C2168-60038 |
Driver software with 14 True Type fonts, Version 4.0 - Includes 5.25-inch floppy disk and manual - For Windows 3.1 (English) |
| C2170-90099 |
DeskJet family technical reference manual - Lists PCL 3 printer commands for DeskJets and OfficeJets |
| C2913A |
RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long |
| C3832A |
Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
| C3833A |
Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
| C4562-60018 |
Garage assembly - Holds print cartridge when not in use - Also referred to as a cartridge humidor |
| C5973A |
Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package |
| C6044A |
HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
| C6450-60020 |
DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 |
| C6450-60021 |
DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 |
| C6611AN |
Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C6822A |
Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M Post-it adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6823A |
Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M Post-it adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| 13242G |
RS-232C cable - 25-pin (M) to 25-pin (M) - 5.0m (16ft) long |
| 51625A |
25 Color InkJet Crtg NAM |
| 51625AA |
HP 25 Color InkJet Crtg AP |
| 51625AC |
Tri-color ink print cartridge - Prints approximately 150 pages based on 13.5% total density (4.5% for each color) on a 8in by 10in print area (canada) |
| 51625AE |
HP 25 Color InkJet Crtg EUR |
| 51625AL |
HP 25 Color InkJet Cartridge LAR |
| C2113-00003 |
Sled spring - Maintains left sled alignment in sled ramps |
| C2113-40001 |
Color sled - Caps the color print cartridge when not in use |
| C2113-40005 |
Wiper bracket - Supports and positions the black wiper |
| C2113-40006 |
Wiper - Cleans ink and debris from print nozzles |
| C2113-40008 |
Right wall - Right side mounting surface for carriage motor and carriage rod - Maintains alignment of transmission gears |
| C2113-40010 |
Motor clamp - Holds ramp motor in place |
| C2113-40023 |
Color wiper - Cleans ink and debris from print nozzle |
| C2113-40052 |
Sled ramp - Plastic tumbler that retains sled for cartridges |
| C2113-60004 |
Ramp motor - Controls position of ramp sled for cartridges |
| C2113-60005 |
Cleaning Brush - Stored in the Garage Assembly |
| C2113-60009 |
Head driver board - Print cartridge firing control |
| C2113-60032 |
Carriage assembly - Holds and positions print cartridges |
| C2113-60078 |
Sled assembly - Caps black print cartridge when not in use |
| C2113-60103 |
Service station sled replacement kit - Includes the internal gear driven cartridge wiping mechanism assembly, removal tool, and multi-lingual instructions |
| C2113-69030 |
Complete mechanism - Carriage movement, paper picking and service station operations |
| C2113-80010 |
Ink absorber for HP DeskJet 500 Series |
| C2114-40010 |
Pick trigger - Initiates paper pick cycle |
| C2114-60001 |
Main logic board |
| C2114-60001R |
Main logic board |
| C2114-60031 |
Top cover - Plastic cover without access door and tray |
| C2114-60066 |
C2114A DeskJet 500C printer users guide (English) |
| C2114-80003 |
Nameplate - DeskJet 500C printer logo |
| C2114-80004 |
Keypad overlay - Identifies function buttons on top cover |
| C2124-40109 |
Color cap - Seals print cartridge nozzel when parked |
| C2121-00052 |
Ground plane - Fits into base under main logic board |
| C2121-60005 |
Paper access cover assembly - Lift-up top/front cover - Does NOT include nameplate |
| C2121-60080 |
C2121A DeskJet 550C owners manual kit - Includes users, color, and set-up guides (English) |
| C2121-60118 |
Base assembly - Bottom printer support - Includes bumpers |
| C2121-60127 |
Main Logic Board |
| C2121-60127R |
Main logic board |
| C2121-60130 |
Cable assembly for HP DeskJet 550C Series |
| C2121-80002 |
Nameplate - DeskJet 550C |
| C2124-00001 |
Encoder spring - Provides tension for encoder strip |
| C2124-20001 |
Rear rail - Supports carriage assembly |
| C2124-20002 |
Carriage rod - Supports carriage during horizontal movement |
| C2124-20008 |
Limiter spring - Provides tension for rotation limiter |
| C2124-40030 |
Output tray cover - Smoked plastic |
| C2124-40039 |
Paper pusher guide |
| C2124-40040 |
Slider - Allows paper pusher to slide to the right |
| C2124-60005 |
Power switch assembly for power supply PC board |
| C2124-60115 |
Carriage motor - Drives the carriage belt |
| C2124-60116 |
Lower pinch roller |
| C2124-60190 |
Service station stepper motor (does not include cable) - Moves the rack vertically in the service station assembly |
| C2124-60193 |
Cable assembly for HP DeskJet 550C Series |
| C2124-60197 |
Head driver board - Circuitry to fire print cartridge |
| C2124-80004 |
Absorber for HP DeskJet 550C Series |
| C2124-80008 |
Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position |
| C2124-80014 |
Flex cable for HP DeskJet 550C Series |
| C2124-80015 |
Power cable assembly |
| C2127-40003 |
Paper input stop (Length adjuster/paper catch) - Parchment white - Does not include green stop for envelopes |
| C2127-40004 |
Left Filler Plate - Left side of Paper Input Tray |
| C2127-40005 |
Right Filler Plate - Right side of Paper Input Tray |
| C2127-60153 |
Keypad assembly |
| C2128-40061 |
Envelope sled - Supports feeding of envelopes into printer |
| C2128-60169 |
Power supply board |
| C2145-00017 |
Lever arm spring - Provides tension between the lever arm and the pressure plate lifter |
| C2162-20004 |
Pivot spring - Provides tension for pivot to return to upright position |
| C2162-40016 |
Idler hub - Drive belt pivot point on left side of chassis |
| C2162-67805 |
Service station assembly with motor - Does not include service station sled or service station motor cable |
| C2162-67806 |
Preloader - Applies downward pressure on drive shaft |
| C2162-67813 |
OOPS flag - Out of paper sensor |
| C2164-00015 |
Carriage shaft retainer clip |
| C2164-40060 |
Carriage belt for HP DeskJet 550C Series |
| C2164-60045 |
Paper stepper motor assembly (does NOT include cable) |
| C2169-60056 |
Service station assembly with motor and sled - Does not include service station motor cable |
| C2169-67801 |
Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station |
