| Part |
Picture |
Description |
| C2684-60213 |
Left side cover - Installed behind left side tray cover |
| C2684-60216 |
Knob - Located on left side cover |
| C2684-60222 |
Power button assembly |
| C2684-60225 |
Paper width adjustment for Tray 3 |
| C2684-60226 |
Paper length adjustment for Tray 3 |
| C2684-60231 |
Bin 1 (Tray 2) sensor assembly |
| C2684-60234 |
Left side tray cover |
| C2684-60237 |
Keypad assembly |
| C2684-60238 |
LCD display assembly |
| C2684-60239 |
Front cover and keypad cover - Has buttons for the keypad |
| C2684-60240 |
Main access door - Installed over top of printer |
| C2684-60241 |
Ramp motor assembly |
| C2684-60242 |
Kicker assembly - Attached to pick roller shaft |
| C2684-60243 |
Left ESD clip for HP DeskJet 2500C Series |
| C2684-60244 |
Right ESD clip for HP DeskJet 2500C Series |
| C2684-60248 |
Holder - Holds the trailing cable ferrite holder |
| C2684-60249 |
Cable harness bundle A - Has many connectors: 30-pin (F) marked J14, 30-pin (F) marked J23, 2-pin (F), six 3-pin (F), 5-pin (F), 6-pin (F), and two 11-pin (F) - Overall length is 103cm (40.8 inches) |
| C2684-60250 |
Cable harness bundle B with ferrites - Has many conectors: two 30-pin (F), two 2-pin (F), four 3-pin (F), 9-pin (F), two 10-pin (F), 12-pin (F) - Overall length is 102cm (40in) |
| C2684-60252 |
Encoder cover - The smaller of the 2 items that snap together to form the encoder guide assembly |
| C2684-60253 |
Trailing cable ferrite |
| C2684-60254 |
Holder - Holds the trailing cable ferrite |
| C2684-60258 |
Carriage rod - Shaft that the carriage assembly rides on |
| C2684-60259 |
Carriage shaft stop |
| C2684-60260 |
Ground bracket for HP DeskJet 2500C Series |
| C2684-60261 |
Left main (Front) starwheel assembly |
| C2684-60262 |
Center main (Front) starwheel assembly |
| C2684-60263 |
Right main (Front) starwheel assembly |
| C2684-60268 |
Main PC board swivel sensor |
| C2684-60276 |
RIDS hanger - Wire item used to secure ink supply tubes |
| C2684-60289 |
Self paced training kit (PAL version) - Final exam is available at the reseller Website |
| C2684-60290 |
Self paced training kit (NTSC version) for HP 2500C printer - Includes service manual |
| C2684-60301 |
Print mechanism core (print zone) - Large structure where the pick roller and drive roller are installed - Includes both rollers |
| C2684-60302 |
Pick roller assembly - Has 1 large roller and 2 small rollers |
| C2684-60308 |
Rear trough cover - Removable trough to clear paper jams |
| C2684-60319 |
Print mechanism assembly |
| C2684-69319 |
Print mechanism assembly |
| C2685-60202 |
8MB DIMM memory module |
| C3390A |
HP 2500C PCL5 upgrade kit - Includes DIMM module and installation instructions |
| C3391A |
16MB EDO SIMM memory upgrade kit - Includes matched pair of 8MB, 60nS, 32-bit EDO SIMMs |
| C3392A |
32MB EDO SIMM memory upgrade kit - Includes matched pair of 16MB, 60nS, 32-bit EDO SIMMs |
| C4530-00091 |
Carriage shaft retainer - Metal spring which holds carriage shaft in place |
| C4530-00105 |
Carriage belt spring |
| C4530-00113 |
Spring for carriage assembly |
| C4530-40261 |
Carriage access door sensor arm |
| C4530-67807 |
Cartridge latch assembly - Holds cartridges in the carriage |
| C4801A |
No. 10 cyan ink printhead assembly - Approximate life expectancy is 15000 pages minimum at 15% mixed color printing density |
| C4802A |
No. 10 magenta ink printhead assembly - Approximate life expectancy is 15,000 pages minimum at 15% mixed color printing density |
| C4803A |
No. 10 yellow ink printhead assembly - Approximate life expectancy is 15,000 pages minimum at 15% mixed color printing density |
| C4840AE |
HP No. 10 Black Ink Cartridge, EUR |
| C4840AL |
No. 10 standard capacity Black ink cartridge (holds 27ml of ink) - Prints approximately 500 pages at 5% printing density (Latin America) |
| C4841A |
No. 10 standard capacity Cyan ink cartridge (holds 29ml of ink) - Prints approximately 1240 pages at 15% mixed color printing density (USA) |
| C4841AA |
HP No 10 Cyan Ink Cartridge, AP |
| C4842A |
No. 10 standard capacity Yellow ink cartridge (holds 29ml of ink) - Prints approximately 1240 pages at 15% mixed color printing density (USA) |
| C4842AA |
HP No 10 Yellow Ink Cartridge, AP |
| C4843A |
No. 10 standard capacity Magenta ink cartridge (holds 29ml of ink) - Prints approximately 1240 pages at 15% mixed color printing density (USA) |
| C4843AA |
HP No 10 Magenta Ink Cartridge, AP |
| C4844A |
HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
| C4844AE |
No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Europe) |
| C4844AL |
No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Latin America) |
| C6055A |
HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6831A |
HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets |
| C7013A |
Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package |
| D3647-63001 |
Two 8MB, 60nS, 32-bit EDO SIMM memory modules - Matched pair of two SIMMs, 16MB total memory |
| D3647B |
16MB memory upgrade kit - Includes matched pair of 8MB, 60nS, 32-bit EDO SIMMs |
| D4543-63001 |
Two 32MB, 60nS, 32-bit EDO SIMM memory modules - Matched pair of two SIMMs, 64MB total memory |
| D4543A |
64MB memory upgrade kit - Includes matched pair of 32MB, 60nS, 32-bit EDO SIMMs |
| J4106-69001 |
JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector |
| 0515-4576 |
Screw-mach m3 x 0.5 6.9mm-lg pan-hd |
| 8121-0018 |
Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Australia and New Zealand) |
| 8121-0020 |
Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South Africa) |
| 8121-0024 |
Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) |
| 8121-0025 |
Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 240VAC in India) |
| C2688-67002 |
Right side end cap - Covers the right side of the printer and the ink delivery system |
| C2688-67003 |
Left side end cap - Covers the left side of the printer |
| C2688-67006 |
Printer base - Covers bottom of the printer |
| C2688-67009 |
Ink Delivery System assembly - Includes ink delivery tubes |
| C2688-67010 |
Ink Supply Station assembly - Holds the ink cartridges and pumps ink out to the printheads - Includes the ink supply station motor |
| C2688-67012 |
Paper ejector - Ejects printed paper to the output tray |
| C2688-67013 |
Input tray assembly - Pullout tray with paper length/width stop and fold down door |
| C2688-67016 |
Right wing - Holds printed paper after being ejected |
| C2688-67019 |
Top/front main access door assembly |
| C2688-67025 |
Front panel cover assembly (Dark Gray) - Covers the front center of the printer - Includes buttons, LCD panel cover, access door sensor, and keypanel signal and power harnesses |
| C2688-67027 |
Keypad PC board assembly |
| C2688-67028 |
Access door sensor |
| C2688-67030 |
Cable assembly - 2-pin (M) connector to 4-pin (F) connector - 18cm (7in) long |
| C2688-67036 |
Cable assembly with ferrites - Has many connectors: four 2-pin (F), five 3-pin (F), 3-pin (M), 5-pin (F), 6-pin (F), 7-pin (F), 9-pin (F), 10-pin (F), two 30-pin (F) - Overall length is 1.4m (4.5ft) |
| C2688-67039 |
Spit aerosol absorber - Absorbs ink mist during the cleaning process |
| C2688-67042 |
Service station motor |
| C2688-67043 |
Upper/rear paper guide assembly - Includes upper and rear paper guides and the envelope switch |
| C2688-67044 |
Drive Roller and Pivot Assembly - Includes shaft with four rollers, drive gear, and pivot assembly |
| C2688-67045 |
Paper motor assembly |
| C2688-67046 |
Media sensor - Senses the presence of media |
| C2688-67048 |
Pinch spring - Attaches between the rear and upper paper guides |
| C2688-67051 |
Pinch roller spring - Puts tension on the pinch roller |
| C2688-67054 |
Left Z stop assembly - Secures the left end of the drive shaft in the vertical direction |
| C2688-67055 |
Drive roller sensor PC board |
| C2688-67057 |
Separator assembly |
| C2688-67058 |
Side Plate Assembly - Mounts on the left side of the chassis - Secures the Input Gear Assembly |
| C2688-67059 |
X bias spring for HP Business InkJet 2280 Series |
| C2688-67060 |
Chassis assembly - Mounts to the base - Main mounting base for the rest of the print mechanism |
| C2688-67062 |
Carriage Plate Assembly - Support for the Carriage and Carriage Drive components |
| C2688-67063 |
Carriage shaft shim |
| C2688-67071 |
Idler system assembly - Keeps tension on the carriage belt |
| C2688-67074 |
Z-Axis service station alignment - Aligns the carriage when positioned in the service station |
| C2688-67077 |
Ground bracket for HP DeskJet 2200 Series |
| C2688-67078 |
EIO box assembly - Has expansion card slots |
| C2688-67079 |
EIO expansion slot cover |
| C2688-67081 |
Connector board shield |
| C2688-67084 |
250-sheet input tray - Tray 2 |
| C2688-67087 |
Nameplate - DeskJet 2200TN printer logo |
