Part |
Picture |
Description |
RC1-7144-000CN |
Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |
RC1-7145-000CN |
Torsion spring - Provides radial tension for loop sensor flag located on the high voltage power supply |
RC1-7162-000CN |
Duct, scanner lower |
RC1-7163-000CN |
Fusing shutter - Fuser shutter door - Closes when cartridge access door is opened |
RC1-7168-000CN |
Face down flag for HP LaserJet 5200 series |
RC1-7169-000CN |
Fan holder - Mount for fan on left side of printer |
RC1-7174-000CN |
Rear lower cover - Located under face-up delivery assembly |
RC1-7186-000CN |
Paper full detect flag |
RC1-7192-000CN |
Front cover for face down paper delivery assembly |
RC1-7193-000CN |
Paper delivery guide |
RC1-7200-000CN |
Duct, scanner for HP LaserJet 5200 series |
RC1-7210-000CN |
Right side cover assembly |
RC1-7211-000CN |
Right side upper cover assembly - Has cooling fan vent opening |
RC1-7212-000CN |
Right side front corner cover |
RC1-7213-000CN |
Guide, cable for HP LaserJet 5200 series |
RC1-7216-000CN |
Dc controller cable guide |
RC1-7217-000CN |
DC controller board cover on right side of printer. |
RC1-7218-000CN |
Holder, connector |
RC1-7220-000CN |
Grounding plate connector - Electrical connection for DC controller board cover. |
RC1-7221-000CN |
Support handle for HP LaserJet 5200 series |
RC1-7222-000CN |
Plate handle shield |
RC1-7225-000CN |
Power switch button |
RC1-7226-000CN |
Power switch rod - Mechanical link between power switch on printer and DC controller board. |
RC1-7241-000CN |
Contact holder - Holds fuser bias contacts. |
RC1-7244-000CN |
Lock arm - Connects to cartridge door stop to protect the grounding bias contact pins. |
RC1-7249-000CN |
Support bushing - Axial support for top sensor flag - Two used |
RC1-7261-000CN |
Paper sensor flag - Leading edge paper sensor flag |
RC1-7264-000CN |
Cross member auxiliary plate |
RC1-7265-000CN |
Contact holder cover - Fuser bias contact cover. |
RC1-7268-000CN |
Sensor holder - Media leading edge sensor holder |
RC1-7283-000CN |
Bushing - Located on the gear plate next to the cam and the 133-tooth gear |
RC1-7284-000CN |
Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
RC1-7284-020CN |
Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
RC1-7285-000CN |
Coupling lever - Lever arm that couples the drive gear to the toner cartridge. |
RC1-7286-000CN |
Cartridge guide - Lower right side toner cartridge guide |
RC1-7287-000CN |
Cartridge guide - Upper right side toner cartridge guide |
RC1-7288-000CN |
Link stopper - Stop for lever arm that couples the drive gear to the toner cartridge |
RC1-7289-000CN |
Tag link - This is an arm extension for a mechanical movement - It allows the printer to read the toner cartridge supplies status |
RC1-7294-000CN |
Tag link lock - An arm extension for a mechanical movement - Allows the printer to read the toner cartridge supplies status |
RC1-7378-000CN |
Plate, grounding |
RC1-7379-000CN |
Left side duplexer assembly guide - Guide for duplexer assembly to slide in and out of printer |
RC1-7380-000CN |
Right side duplexer assembly guide - Guide for duplexer assembly to slide in and out of printer |
RC1-7403-000CN |
Swing plate - Diverter plate for simplex to duplex media path. |
RC1-7404-000CN |
Shaft, fixing swing gear |
RC1-7405-000CN |
Release arm - Fuser release arm - Provides mechanical link between fuser release lever and cartridge door. |
RC1-7406-000CN |
Release lever - Fuser release lever on left side of printer. |
RC1-7407-000CN |
Guide, cable for HP LaserJet 5200 series |
RC1-7408-000CN |
Release lever - Paper release lever for delivery roller assembly - Upper left side of printer |
RC1-7410-000CN |
Paper sensor flag for Tray 2 paper pickup assembly - Located on paper pickup roller shaft. |
RC1-7434-000CN |
Fan housing - Housing mount and duct for low voltage power supply fan |
RC1-7435-000CN |
Guide, scanner cable |
RC1-7436-000CN |
Shaft, fixing shutter |
RC1-7443-000CN |
Bushing - Located between the 25-tooth and 35-tooth gears on the tranfer drive side plate |
RC1-7450-000CN |
Cam, shutter for HP LaserJet 5200 series |
RC1-7451-000CN |
Shutter lever - Connects to laser shutter |
RC1-7452-000CN |
Shutter lever cover - Covers front of shutter lever |
RC1-7455-000CN |
Plate, fan grounding |
RC1-7459-000CN |
Full paper detect flag |
RC1-7459-020CN |
Tray full sensor flag for face down paper output tray |
RC1-7460-000CN |
Paper sensor flag in face down paper delivery assembly |
RC1-7460-020CN |
Paper sensor flag in face down paper delivery assembly |
RC1-7462-000CN |
Face down sheet flag |
RC1-7466-000CN |
Torsion spring - Provides tension for paper sensor lever |
RC1-7494-000CN |
Link, drive release |
RC1-7495-000CN |
Arm, drive release |
RC1-7508-000CN |
Top cover - Top of printer section that document scanner/ADF assembly mounts to |
RC1-7509-000CN |
Left side cover - Plastic cover for left side of printer - Does not include DIMM memory access door |
RC1-7510-000CN |
DIMM memory cover - DIMM memory access door located on left side cover of printer |
RC1-7511-000CN |
Right side cover - Plastic cover for right side of printer - Does not include stapler plug cover |
RC1-7512-000CN |
Stapler slot cover - Attaches to right front corner of printer - Used to cover hole if stapler unit is not installed |
RC1-7514-000CN |
Fan holder - Housing mount for fan FM1 - Located on upper right side of printer |
RC1-7523-000CN |
Stapler/stacker access door |
RC1-7528-000CN |
Clear Jam label - Located on registration roller assembly |
RC1-7529-000CN |
Fixing Pressure Release label - Located on registration roller assembly |
RC1-7753-000CN |
Left cover (duplexer) |
RC1-7754-000CN |
Dplx left cover |
RC1-7754-010CN |
Duplexer left cover - Dark plastic cover on left end of mechanical section of duplexer assembly |
RC1-7755-000CN |
Duplexer right cover - Dark plastic cover on right end of mechanical section of duplexer assembly |
RC1-7756-000CN |
Duplexer top cover - Dark plastic cover on top of mechanical section of duplexer assembly |
RC1-7757-000CN |
Duplexer rear cover - Dark plastic cover on back of mechanical section of duplexer assembly |
RC1-7760-000CN |
Duplexer fan holder - Cooling fan housing inside plastic cover of mechanical section of duplexer assembly |
RC1-7761-000CN |
Duplexing duct for HP LaserJet 5200 series |
RC1-7770-000CN |
Duplexer paper sensor flag - Black plastic tab located between the two large metal plates of the paper feed path of duplexer assembly - Two used |
RC1-7770-010CN |
Flag-Duplexing Jam Detect |
RC1-7783-000CN |
Duplexer paper feed roller - Front roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
RC1-7790-000CN |
Duplexer paper feed roller - Rear roller of the two feed rollers inside plastic cover of mechanical section of duplexer assembly |
RC1-7799-000CN |
Spring, torsion |
RC1-7803-000CN |
500 sheet feeder left side cover |
RC1-7804-000CN |
Cover : Left front corner cover for 500 sheet paper tray assembly. |
RC1-7806-000CN |
Right front cover - Right front corner cover of 500 sheet feeder assembly |
RC1-7807-000CN |
Lower frame cover - Lower front cover for 500 sheet feeder assembly |
RC1-7808-000CN |
500-sheet feeder cassette assembly rear cover |
RC1-7823-000CN |
Cam for HP LaserJet 5200 series |
RC1-7825-000CN |
Plate, grounding |
RC1-7835-000CN |
Guide, cassette bottom |
RC1-7836-000CN |
Sensor flag - Top of paper sensor flag for 500 sheet feeder assembly. |
RC1-7837-000CN |
Roller feed for HP LaserJet 5200 series |
RC1-7843-000CN |
Guide, cable for HP LaserJet 5200 series |
RC1-7877-000CN |
Paper size sensor flag for Tray 3 |
RC1-7890-000CN |
Detent stop for 500 sheet feeder |
RC1-8021-000CN |
Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
RC1-8022-000CN |
Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
RC1-8026-000CN |
Spring holder - Hold the compression spring located on the fuser bias |
RC1-8027-000CN |
Front duplexer guide - Guide/support for duplexer assembly |
RC1-8032-000CN |
Lever, fixing shutter |
RC1-8034-000CN |
Sensor arm lock - Detects if cartridge is present sensor (SR9) Sensor ARM Lock |
RC1-8035-000CN |
Tray holder - Right front paper cassette holder |
RC1-8036-000CN |
Tray holder - Left front paper cassette holder |
RC1-8038-000CN |
Cam, pad return, lower |
RC1-8039-000CN |
Front pressure release lock |
RC1-8048-000CN |
Rear guide for the duplexer assembly |