| Part |
Picture |
Description |
| RC2-0633-000CN |
Link switch - Metal arm that links power switch to power supply. |
| RC2-0634-000CN |
Link switch holder - Plastic guide that holds power link arm in place. |
| RC2-0638-000CN |
I/O face plate - Mounts on the formatter board cover (non-network models) |
| RC2-0639-000CN |
I/O face plate - Mounts on the formatter board cover (network models) |
| RC2-0648-000CN |
Air guide - Located next to the cartridge duct. |
| RC2-0649-000CN |
Fuser film drive side plate - Located on the fuser assembly. |
| RC2-0652-000CN |
Plain Washer - Located on the pendulum assembly |
| RC2-0657-000CN |
Fuser thrust stopper - Located on the fuser drive assembly. |
| RC2-0665-000CN |
Torsion spring - Tiny spring that attaches the face down roller. |
| RC2-0697-000CN |
Plate face-up shield |
| RC2-0700-000CN |
Cartridge guide - Lower right side toner cartridge guide. |
| RC2-0701-000CN |
Inner bushing - Rides on the large white 201-tooth drive gear. |
| RC2-0702-000CN |
Right cartridge stopper - Provided a predetermined position for the cartridge. |
| RC2-0703-000CN |
Cartridge guide - Upper left side toner cartridge guide |
| RC2-0704-000CN |
Cartridge guide - Lower left side toner cartridge guide |
| RC2-0705-000CN |
Lever drive release |
| RC2-0706-000CN |
Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
| RC2-0707-000CN |
Left cartridge stopper - Provided a predetermined position for the cartridge |
| RC2-0722-000CN |
Right side cover - Provides acces to DIMMs - Located on the right side of the printer. |
| RC2-0724-000CN |
Paper clip tray - Small square tray were you can put the paper clips - Located on the right side of the printer next to the stapler. |
| RC2-0725-000CN |
Staple tray - Plastic support for paper while stapling - Attaches to stapler unit |
| RC2-0726-000CN |
Fax Cover - Mounts on the upper right side of the top cover assembly. |
| RC2-0727-000CN |
Stapler cartidge cover - Located on the right side of the printer - Replaces the stapler door for devices without staplers. |
| RC2-0729-000CN |
Internal fax cover (fax rail) - Located next to the fax cover on the top cover assembly |
| RC2-0736-000CN |
Metal face plate cover - For the formatter - Contains openings for external connections |
| RC2-0739-000CN |
Sensor cable cover - Plastic cover that protects the face up sensor cable |
| RC2-1025-000CN |
Left side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cutout for the rear panel power switch and power cord receptacle - Covers |
| RC2-1026-000CN |
Right side cover assembly - Slightly curved plastic cover with the HP logo molded into it - Has cutout for the rear panel interface connectors |
| RC2-1027-000CN |
Toner cartridge access door - Door under scanner assembly used for accessing the toner cartridge and transfer roller assembly |
| RC2-1090-000CN |
Cartridge access door assembly - For the LaserJet P1005 printer series |
| RC2-1097-000CN |
Left side plate - For the LaserJet P1006/P1008 printer series |
| RC2-1100-000CN |
Short media stopper - Attached on the paper pickup/output tray - For the LaserJet P1005/P1007 printer series |
| RC2-1106-000CN |
Cancel button - Located on the left side plate - For the LaserJet P1006/P1008 printer series |
| RC2-1108-000CN |
Light pipe assembly - Transfers light from LED to keypad - Located on the left side plate |
| RC2-1123-000CN |
Rear panel - For the LaserJet P1000 printer series |
| RC2-1206-000CN |
Cartridge access door assembly - For the LaserJet P1006/P1008 printer series |
| RC2-1213-000CN |
Left side plate - For the LaserJet P1005 printer series |
| RC2-1400-000CN |
Right side cover assembly - For the LaserJet P1500 printer series |
| RC2-1405-000CN |
Dust cover - For the LaserJet P1500 printer series |
| RC2-1435-000CN |
Rear panel - For the LaserJet P1500 printer series |
| RC2-1569-000CN |
DC cable guide - Attaches to the main drive assembly |
| RC2-2432-000CN |
Swing Plate Gear assembly drive fuser assembly unit |
| RC2-2459-000CN |
Option cover - Mounts on the top cover assembly |
| RC2-2468-000CN |
Formatter cover - Plastic cover that protects the formatter board - Mounts on the right cover assembly - For LaserJet P4015/P4515 series |
| RC2-2475-000CN |
Right front cover - For LaserJet P4015/P4515 series |
| RC2-2476-000CN |
Envelope connector cover - Mounts on the right front cover - For LaserJet P4015/P4515 series |
| RC2-2478-000CN |
Right rear cover - Plastic covert located next to the face-up tray assembly - For LaserJet P4015/P4515 series |
| RC2-2480-000CN |
Release arm A - Mount on the drum drive assembly |
| RC2-2481-000CN |
Arm, release, b Release arm B - Mount on the drum drive assembly |
| RC2-2482-000CN |
Upper Release Rod - Mounts On The Drum Drive Assembly |
| RC2-2510-000CN |
Duplexing outer cover - For LaserJet P4015/P4515 series |
| RC2-2524-000CN |
Paper detect flag - Locted on the 1,500-sheet feeder paper pickup assembly |
| RC2-2524-020CN |
Paper detect flag |
| RC2-2584-000CN |
Lock cover - Mounts on top of the left cover on the 1,500-sheet paper feeder |
| RC2-2599-000CN |
Duplexer paper re-pickup lower guide |
| RC2-2602-000CN |
Duplexer paper re-pickup upper guide |
| RC2-2633-000CN |
Screw M 4x5 |
| RC2-2640-000CN |
Rear cover - Plastic cover that protects the rear side of the 1,500-sheet paper feeder |
| RC2-2641-000CN |
Right cover - Plastic cover that protects the right side of the 1,500-sheet paper feeder |
| RC2-2642-000CN |
Left cover - Plastic cover that protects the left side of the 1,500-sheet paper feeder |
| RC2-2643-000CN |
Lower left cover - Plastic 'L' shaped covert that protects the lower left side of the 1,500-sheet paper feeder |
| RC2-2667-000CN |
Rod, switch for HP LaserJet P4014 Printer |
| RC2-2940-000CN |
Top cover assembly - Plastic cover that protects the top part of the printer chassis |
| RC2-2946-000CN |
Fan holder - Holds the cooling fan (FM1) |
| RC2-2952-000CN |
Clear jam label |
| RC2-2953-000CN |
Labelfix pressure rel |
| RC2-2960-000CN |
Cartridge access top cover - Protects carriage and printer mechanism |
| RC2-2965-000CN |
Coupling link - Located on the upper right side of the printer chassis |
| RC2-2971-000CN |
Fuser rear cover - Protects the fuser assembly - Located on the top rear side of the printer |
| RC2-2979-000CN |
Left side tray guide |
| RC2-2980-000CN |
Right side tray guide |
| RC2-4500-100CN |
LaserJet tray 1 arm assembly. P4015 P4015 P4515 M601 M602 M603 MP Tray 1 Pick Up Left Arm Only.(kit RC2-4653-000CN) |
| RC2-4563-000CN |
LaserJet tray 1 Arm assembly for HP Enterprise and Laserjet Models. MP Tray 1 Pick Up ARM Left & Right set kit. |
| RC2-4828-000CN |
Wire(mech) sensor protect |
| RC2-4915-000CN |
Guide, option enterance |
| RC2-4916-000CN |
Door stopper right link |
| RC2-4924-000CN |
Cover, right door Gear rear |
| RC2-5019-000CN |
Right lower inner cover - Plastic cover that protects the lower inner part of the printer chassis |
| RC2-5042-000CN |
Rear handle for HP CD644A |
| RC2-5048-000CN |
Rear cover - Plastic cover that protects the rear side of the printer |
| RC2-5052-000CN |
Left cover - Plastic cover that protects the left side of the printer |
| RC2-5056-000CN |
Right front cover - Plastic rectangular shape cover that protects the right front side of the printer |
| RC2-5057-000CN |
Right rear cover - Plastic cover that protects the right rear side of the printer |
| RC2-5059-000CN |
Right lower cover - Plastic cover that protects the right lower side of the printer |
| RC2-5069-000CN |
Left lower cover - Plastic cover that protects the left lower side of the printer |
| RC2-5118-000CN |
Interlock link for HP Color LaserJet CP3525 |
| RC2-5119-000CN |
Interlock link for HP Color LaserJet CP3525 |
| RC2-5120-000CN |
Interlock link for HP Color LaserJet CP3525 |
| RC2-5121-000CN |
Interlock link switch arm |
| RC2-5123-000CN |
Interlock switch mount |
| RC2-5148-000CN |
Spring, grounding |
| RC2-5239-000CN |
Legal tray cover - For LaserJet P4015/4515 series |
| RC2-5262-000CN |
500-sheet cassette torque limiter |
| RC2-5416-000CN |
Drawer connector holder - Used for tray 3 |
| RC2-5425-000CN |
Front upper cover - Plastic cover that protects the front upper part of the paper feeder assembly |
| RC2-5426-000CN |
Right front cover - Plastic cover that protects the right front part of the paper feeder assembly |
| RC2-5427-000CN |
Right cover - Plastic cover that protects the right part of the paper feeder assembly |
| RC2-5428-000CN |
Left cover - Plastic cover that protects the left side of the paper feeder assembly |
| RC2-5429-000CN |
Rear cover - Plastic cover that protects the rear part of the paper feeder assembly |
| RC2-5430-000CN |
Left front cover - Plastic cover that protects the left front part of the paper feeder assembly |
| RC2-5576-000CN |
Tray stopper - For the stapler stacker multi-bin mailbox |
| RC2-5688-000CN |
Grounding plate - Located on envelope feeder section |
| RC2-5700-000CN |
Paper Pick-Up Roller - For The Envelope Feeder |
| RC2-5701-000CN |
Paper Feed Roller - For The Envelope Feeder |
| RC2-5705-000CN |
Tray Extension - For The Envelope Feeder |
| RC2-5757-000CN |
Formatter cover - Plastic cover that protects the formatter board - Mounts on the right cover assembly - For LaserJet P4014 series |
| RC2-5758-000CN |
Right front cover - For LaserJet P4014 series |
| RC2-5759-000CN |
Envelope connector cover - Mounts on the right front cover - For LaserJet P4014 series |
| RC2-5760-000CN |
Duplexing outer cover - For LaserJet P4014 series |
| RC2-5761-000CN |
Legal tray cover - For LaserJet P4014 series |
| RC2-5768-000CN |
Right rear cover - Plastic covert located next to the face-up tray assembly - For LaserJet P4014 series |
