Part |
Picture |
Description |
RG1-0544-000CN |
Power supply - 24VDC |
RG1-0547-000CN |
Duplex unit driver board |
RG1-0572-000CN |
DC power supply #2 |
RG1-0573-000CN |
Driver board - For high capacity paper deck |
RG1-0577-000CN |
Drum temperature control board (120V) |
RG1-0578-000CN |
Drum temperature control board (240V) |
RG1-0579-030CN |
Laser driver board |
RG1-0621-000CN |
Drive assembly - Clutch/gear assembly to control registration roller |
RG1-0648-000CN |
Vertical pass assembly |
RG1-0653-090CN |
Developing assembly |
RG1-0680-000CN |
Face down stacker control board |
RG1-0684-020CN |
Upper feeder assembly - Has delivery shaft with five rollers and three small belts |
RG1-0685-030CN |
Complete lifter assembly - Moving tray assembly on stacker unit |
RG1-0718-000CN |
Paper control board - Includes solenoids for the paper pickup roller and the registration assembly - Also includes paper out sensor PS 301 and manual feed sensor PS 302 |
RG1-0719-000CN |
Exit sensor board - With cable and thermistor |
RG1-0878-000CN |
DC control assembly - Includes CPU master and slave, double feed detect and mother board that the three boards attach to |
RG1-0904-000CN |
Display assembly - Outline of printer and LED indicators |
RG1-0905-000CN |
Cable assembly - From AC power module to DC power supply |
RG1-0906-000CN |
Cable assy - From DC controller to high voltage power supply |
RG1-0907-000CN |
Cable assembly - Large 7-pin (F) connector to small 7-pin (F) connector - 41.5cm (16.4in) long |
RG1-0908-000CN |
Dual cable assembly with ferrites - One 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 43.2cm (17in) long |
RG1-0912-000CN |
Cable assembly - Large 4-pin (F) connector to small 4-pin (F) connector - 6.7cm (2.6in) long |
RG1-0929-000CN |
Mirror shutter assembly - Mounts on the top cover above the toner cartridge |
RG1-0931-060CN |
Pickup (feed) roller assembly - Feeds paper from input tray |
RG1-0932-120CN |
Registration assembly - Next set of rollers after paper feed |
RG1-0933-060CN |
Transfer Corona assembly - Square tube with wire wrapped around it |
RG1-0933-120CN |
Transfer Corona assembly - Square tube with wire wrapped around it |
RG1-0934-000CN |
Feed drive assembly - Six gears mounted on a plate |
RG1-0935-000CN |
Upper pressure assembly - T bar |
RG1-0936-110CN |
High voltage power supply assembly |
RG1-0938-000CN |
Feed guide assembly - Curved plastic piece with ribs |
RG1-0943-000CN |
Gear cluster (Drive) assembly |
RG1-0945-000CN |
Delivery assembly - Final drive rollers for top cover output |
RG1-0946-000CN |
Erase lamp assembly |
RG1-0959-000CN |
Control panel assembly - Includes overlay |
RG1-0966-030CN |
Fusing roller cleaning pad - Felt Wand in Fuser Assembly |
RG1-0967-000CN |
Delivery coupler assembly - Two gear set |
RG1-1001-000CN |
Fuser delivery assembly - Engages with fuser when door is shut |
RG1-1002-240CN |
Fuser Assembly (120V, 60Hz) - Bonds toner to paper by heat |
RG1-1003-240CN |
Fuser Assembly (240V, 50Hz) - Bonds toner to paper by heat |
RG1-1244-000CN |
PreTransfer Corona assembly - (has 2 on green removal handle) |
RG1-1245-020CN |
Transfer/separate Corona - (Has 3 on green removal handle) |
RG1-1278-000CN |
DC controller board |
RG1-1310-000CN |
DC power supply assembly - 120VAC, 60Hz - Main power supply |
RG1-1312-000CN |
DC power supply assembly - 240VAC, 50Hz - Main power supply |
RG1-1318-000CN |
Upper main AC power cable harness which connects to most major assemblies - 120v, 60Hz |
RG1-1319-000CN |
Lower main cable harness |
RG1-1324-000CN |
Drum cleaning assembly - Has rubber tube connecting it to waste toner box |
RG1-1326-000CN |
Registration assembly - Next set of rollers after paper pickup |
RG1-1337-030CN |
Sensor assembly |
RG1-1339-000CN |
Sensor assembly - Sensor arm in a bracket |
RG1-1341-000CN |
Sensor assembly - Lower tray paper out or manual feed |
RG1-1344-000CN |
Upper duplex guide assembly |
RG1-1345-060CN |
Duplex drive roller assembly - Includes paper feed sensor (PS3) |
RG1-1347-000CN |
Lower drive motor assembly |
RG1-1348-000CN |
Vertical registration drive control assembly |
RG1-1349-000CN |
Switchback drive control assembly - Includes solenoids |
RG1-1351-000CN |
Face-up paper output tray - Mounts on switchback assembly |
RG1-1352-000CN |
Flapper solenoid |
RG1-1353-000CN |
Inverter sensor assembly - In switchback assembly |
RG1-1355-000CN |
Lower pressure assembly - T bar |
RG1-1356-000CN |
Paper alignment roller - In lower duplex guide assembly |
RG1-1370-000CN |
Cable assembly for HP LaserJet II |
RG1-1395-020CN |
DC power supply assembly - 240VAC, 50Hz |
RG1-1435-000CN |
Right top cover assembly hinge |
RG1-1436-000CN |
Left top cover assembly hinge |
RG1-1596-000CN |
Lower cassette board |
RG1-1602-000CN |
Cable assembly - From AC power supply to Fuser Assembly |
RG1-1604-000CN |
Density adjust board - Includes cable assembly |
RG1-1608-000CN |
Cable assembly - Includes pickup solenoid |
RG1-1609-000CN |
Cable assembly - Has eight connectors |
RG1-1612-000CN |
Sensor cable assembly |
RG1-1632-000CN |
Upper main cable harness which connects to most major assemblies - 240V, 50Hz |
RG1-1718-000CN |
Feeder assembly (120v) - Carries paper from EP drum to the fuser |
RG1-1719-000CN |
Feeder assembly (240v) - Carries paper from EP drum to the fuser |
RG1-1727-000CN |
Switchback assembly - Does NOT include exterior case pieces |
RG1-1753-000CN |
Ozone filter kit - Replaces old style filter and housing |
RG1-1769-020CN |
Laser driver board - Includes laser assembly |
RG1-1771-000CN |
Scanner motor assembly - Includes motor drive board |
RG1-1772-000CN |
Focusing lens assembly - Black plastic with clear curved lens |
RG1-1776-000CN |
Gear cluster assembly (Large) |
RG1-1777-000CN |
Gear assembly - Right side |
RG1-1778-000CN |
Feed roller assembly - Roller assembly after paper pickup roller |
RG1-1780-000CN |
High voltage toner cartridge contact assembly - With cable |
RG1-1781-000CN |
Interlock push rod - Also opens shutter on toner cartridge |
RG1-1783-000CN |
Order Rg1-1910-020cn |
RG1-1788-150CN |
Fuser Assembly (120V, 60Hz) - Bonds Toner to Paper by Heat |
RG1-1791-070CN |
Delivery roller assembly - Has four Foam rollers - For (Face down) top of printer paper output |
RG1-1792-000CN |
Pickup roller assembly - For multipurpose input tray |
RG1-1793-000CN |
Roller support - Supports left hand side of transfer roller |
RG1-1794-000CN |
Roller support - Supports right side of transfer roller |
RG1-1806-070CN |
Multi-Purpose input tray - Fold down front cover |
RG1-1809-000CN |
Top cover assembly - Includes case pieces and control panel |
RG1-1833-000CN |
Drive gear assembly - Two black 15-tooth gears on white mounting plate |
RG1-1834-000CN |
Delivery roller assembly - Includes three dual knobbed rollers - For (face up) front of printer paper output |
RG1-1910-020CN |
Power supply assembly - 240VAC, 50Hz - Main power supply |
RG1-1912-080CN |
Separation pad - Rectangular pad - Behind pickup roller |
RG1-1946-000CN |
Cable assembly for HP LaserJet III |
RG1-1969-050CN |
DC controller board |
RG1-1970-070CN |
DC controller board |
RG1-1974-000CN |
Control panel assembly |
RG1-1989-000CN |
Control panel assembly |
RG1-1992-000CN |
Switchback assembly - Does NOT include exterior case pieces |
RG1-1993-000CN |
Face-up paper output tray - Mounts on switchback assembly |
RG1-2007-000CN |
Main power supply assembly - 120VAC input, 60Hz |
RG1-2009-000CN |
Main power supply assembly - 240VAC input, 50Hz |
RG1-2067-000CN |
Dual cable assembly with ferrites - 7-pin (F) connector, two 5-pin (F) connectors, and one 4-pin (F) connector - 48.9cm (19.3in) long |
RG1-2307-000CN |
Cable assembly - From formatter board to control panel |
RG1-2498-000CN |
Lower duplex guide assembly - Does NOT include the paper alignment roller |
RG1-2499-000CN |
Upper pickup (Feed) roller - Feeds paper from input tray |
RG1-2500-000CN |
Lower pickup (Feed) roller - Feeds paper from input tray |