| Part |
Picture |
Description |
| RG1-2500-000CN |
Lower pickup (Feed) roller - Feeds paper from input tray |
| RG1-2549-000CN |
Paper control board - Includes solenoids for the upper paper pickup roller and the registration assembly |
| RG1-2622-000CN |
Paper path door assembly (120V, 60Hz) - Complete front of printer |
| RG1-2623-000CN |
Paper path door assembly (240V, 50Hz) - Complete front of printer |
| RG1-2625-000CN |
Top cover assembly - Includes case pieces and control panel |
| RG1-2662-000CN |
Top cover assembly - Includes case pieces and control panel |
| RG1-2692-000CN |
Paper path door assembly (120V, 60Hz) - Complete front of printer |
| RG1-2693-000CN |
Paper path door assembly (240V, 50Hz) - Complete front of printer |
| RG1-2802-000CN |
Tray top cover - For upper tray, when using the envelope feeder - Includes manual feed guide arms |
| RG1-3501-000CN |
Duplexer controller board |
| RG1-3503-000CN |
Power supply assembly |
| RG1-3508-030CN |
Upper rear cover assembly - Includes paper reversing tray and latch - Large box structure on the rear of the LaserJet (Covering the switchback area of the duplexer) |
| RG1-3529-000CN |
Sensor cable - From controller PCA to photo sensor PS1 |
| RG1-3570-000CN |
Upper rear cover assembly - Includes paper reversing tray and latch - Large box structure on the rear of the LaserJet (Covering the switchback area of the duplexer) |
| RG1-3582-000CN |
Duplexer controller board |
| RG1-3814-000CN |
Bin full and interlock sensor board |
| RG1-3815-000CN |
Sensor PCA - Empty bin sensor board |
| RG1-3816-000CN |
Face-up bin full and sensor PCA |
| RG1-3817-000CN |
LED PCA - Status panel LED display board |
| RG1-3836-000CN |
Face down bin assembly - One roller |
| RG1-3837-000CN |
Face down bin assembly - Two rollers |
| RG1-3838-000CN |
Top cover assembly - Upper guide |
| RG1-3840-000CN |
Right cover - Right side cover below the diverter assembly |
| RG1-3844-000CN |
Diverter assembly - Flipper |
| RG1-3853-060CN |
Controller board - 7-bin tabletop mailbox controller PCA |
| RG1-4120-020CN |
ADF door open sensor assembly |
| RG1-4122-000CN |
Scanner motor - Scanner unit motor assembly - Optic unit drive motor and gear |
| RG1-4123-020CN |
Scanner controller PC board assembly |
| RG1-4124-000CN |
Scanner optical unit - Includes scanner lamp |
| RG1-4127-000CN |
Glass assembly for HP LaserJet 4100 Series |
| RG1-4131-000CN |
Carriage pulley assembly - Drive belt tension pulley assembly |
| RG1-4153-000CN |
Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly |
| RG1-4153-130CN |
Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly |
| RG1-4175-000CN |
Power supply with veristor cover |
| RG1-4200-000CN |
Paper feeder assembly PC Board - PC Board on right side of 500 sheet paper feeder assembly |
| RG1-4201-000CN |
Cable and connector on top right rear of 500 sheet feeder assembly |
| RG1-4202-000CN |
Cable and connector on bottom right rear of 500 sheet feeder assembly |
| RG1-4204-000CN |
Size sensor cable - Cable that connects to paper size sensors in 500 sheet feeder assembly |
| RG1-4205-000CN |
Fuser cable - Main fuser cable for LaserJet 4200 series |
| RG1-4209-000CN |
A/C input connector/cable - 120VAC input connector to J1 power supply connector |
| RG1-4212-000CN |
Laser cable - Connects between DC Controller board and laser scanner unit - J145 to J83 |
| RG1-4213-000CN |
Top Cover cable - From top cover microswitch (SW101) to DC Controller board |
| RG1-4214-000CN |
Top bin full sensor cable |
| RG1-4215-000CN |
Control panel cable |
| RG1-4219-000CN |
Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
| RG1-4221-000CN |
Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 |
| RG1-4222-000CN |
Duplexer connector - Connector on power supply assembly for duplexer |
| RG1-4223-000CN |
Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
| RG1-4224-000CN |
Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| RG1-4230-000CN |
A/C input connector/cable - 220VAC input connector to J1 power supply connector |
| RG1-4231-000CN |
Fuser cable - Main fuser cable for LaserJet 4300 series |
| RG1-4231-020CN |
Fuser cable - Main fuser cable for LaserJet 4300 series |
| RG1-4236-040CN |
DC controller board - DC Controller for LaserJet 4200 series Part RG1-4236-030CN is no longer supplied. Please order the replacement, RG1-4236-040CN |
| RG1-4237-030CN |
DC controller board - DC Controller for LaserJet 4300 series |
| RG1-4238-000CN |
Feeder control PC board |
| RG1-4239-000CN |
Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board |
| RG1-4240-000CN |
Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board |
| RG1-4241-000CN |
Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board |
| RG1-4250-000CN |
Sensor cable assembly - For 500 sheet feeder assembly |
| RG1-4250-020CN |
Sensor cable assembly - For 500 sheet feeder assembly |
| RG1-4266-030CN |
Led PC Board Assembly - Located On The Stacker Middle Assembly |
| RG1-4276-020CN |
Control panel assembly |
| RG1-4276-030CN |
Control panel assembly |
| RG1-4306-000CN |
Order Rg1-4306-020cn |
| RG1-4306-020CN |
Power supply PCA - Power supply board only - For 110V-127V operation |
| RG1-4307-000CN |
Engine controller PC board only - Does not include metal pan |
| RG1-4309-000CN |
Delivery sensor cable assembly |
| RG1-4310-000CN |
F/G cable - Chassis to scanner mounting plate ground cable |
| RG1-4314-000CN |
Control panel cable assembly |
| RG1-4329-000CN |
Order Rg1-4329-020cn |
| RG1-4329-020CN |
Power supply PCA - Power supply board only - For 220V-240V operation |
| RG1-4374-000CN |
1500 sheet feeder assembly PC board |
| RG1-4386-020CN |
Scanner power supply assembly - Includes the power supply electronics, fan, and support bracket - Provides power for the ADF and scanner assemblies - Mounts on the rear of the scanner assembly |
| RG5-0021-000CN |
Laser/scanner assembly |
| RG5-0025-220CN |
Paper input unit - Complete paper feed |
| RG5-0027-000CN |
Motor assembly - Drive for paper pickup roller |
| RG5-0034-100CN |
Paper input board |
| RG5-0038-000CN |
Left block - Side of main structure before Fuser Assembly |
| RG5-0039-070CN |
Right block - Side of main structure before Fuser Assembly |
| RG5-0040-060CN |
Main motor assembly |
| RG5-0042-000CN |
Main motor board - With mount |
| RG5-0045-000CN |
Transfer guide - Ribbed plastic plate behind transfer roller |
| RG5-0046-530CN |
Fuser Assembly (120V, 60Hz) - Bonds toner to paper by heat |
| RG5-0047-530CN |
Fuser Assembly (240V, 50Hz) - Bonds toner to paper by heat |
| RG5-0052-060CN |
Duplex drive board - In (Optional) duplexing unit |
| RG5-0056-000CN |
Paper refeed unit |
| RG5-0063-000CN |
Flapper solenoid (SL6) - Controls rear or top paper output |
| RG5-0064-000CN |
Duplex deflector (Feed guide) solenoid (SL7) - In job offset |
| RG5-0065-060CN |
Job Offset solenoid |
| RG5-0067-180CN |
Rear delivery cover assembly - Includes flapper, rollers, and New style paper guide |
| RG5-0069-000CN |
Mirror assembly - Mounted on underside of top cover |
| RG5-0070-000CN |
Bin full sensor arm |
| RG5-0071-140CN |
Top cover assembly - Has recess for face down paper output |
| RG5-0073-000CN |
Output tray assembly |
| RG5-0076-200CN |
High voltage power supply - With toner cartridge contacts |
| RG5-0085-060CN |
Main DC power supply assembly - 120VAC input, 60Hz |
| RG5-0086-060CN |
DC power supply assembly - 240VAC input, 50Hz |
| RG5-0088-000CN |
Control panel assembly - Includes display and keypad |
| RG5-0092-000CN |
AC power supply/sensor board - 120VAC, 60Hz |
| RG5-0093-000CN |
AC power supply/sensor board - 240VAC input, 50Hz |
| RG5-0094-000CN |
Sensor board for HP LaserJet 4Si Series |
| RG5-0095-120CN |
AC power supply - 120VAC, 60Hz |
| RG5-0096-130CN |
AC power supply - 240VAC, 50Hz |
| RG5-0102-030CN |
Power switch assembly |
| RG5-0103-000CN |
Cable assembly for HP LaserJet 4Si Series |
| RG5-0104-000CN |
Cable assembly for HP LaserJet 4Si Series |
| RG5-0107-000CN |
Cable assembly for HP LaserJet IIISi |
| RG5-0108-000CN |
Cable assembly - From DC controller to paper input board |
| RG5-0109-000CN |
Cable assembly - From DC controller to duplex board |
| RG5-0116-000CN |
Output door sensor assembly |
| RG5-0120-000CN |
Front cover assembly - Has holes for paper trays and control panel |
