Part |
Picture |
Description |
RG5-0877-000CN |
Paper Pickup (Feeder) Assembly (Motor Driven) - Mounts in |
RG5-0879-130CN |
Fuser Assembly (120V) - Bonds toner to paper by heat |
RG5-0880-130CN |
Fuser Assembly (240V) - Bonds toner to paper by heat |
RG5-0881-000CN |
Thermoswitch (fuser temperature switch) - At left of fusing roller |
RG5-0886-070CN |
Paper output assembly - Belt driven |
RG5-0888-000CN |
Multi-Purpose input tray - Attaches to front door |
RG5-0903-070CN |
Laser/scanner assembly |
RG5-0966-030CN |
DC controller board |
RG5-0969-040CN |
High voltage power supply assembly |
RG5-0975-000CN |
Cable assembly - 8-pin (F) connector to both a 16.5cm (6.5in) cable with a 4-pin (F) connector and a 22.5cm (8.9in) cable with a ferrite and a 6-pin (F) connector |
RG5-0976-000CN |
Cable assembly - 7-pin (F) connector on each end - 31.1cm (12.3in) long |
RG5-0976-390CN |
Unknown Keyword for LaserJet 4P Series |
RG5-0978-000CN |
Cable assembly - From DC controller to main motor |
RG5-0979-000CN |
Cable assembly for HP LaserJet 5se Series |
RG5-0980-000CN |
Cable assembly - From DC controller to delivery sensor (PS3) |
RG5-0982-000CN |
Cable assembly for HP LaserJet 4M Plus Series |
RG5-1076-000CN |
Control panel assembly (for 220V/240V operation ONLY) - Includes the display (overlay NOT included) |
RG5-1077-000CN |
Control panel assembly (for 100V/120V operation) - Includes the display and an English overlay |
RG5-1086-000CN |
Drive board for HP LaserJet 4 Series |
RG5-1099-000CN |
Lower cassette drive assembly (drive motor and gears) |
RG5-1391-000CN |
Pickup roller assembly - Shaft with two dual rollers - For standard paper input trays |
RG5-1396-000CN |
Gear box - Houses several gears units. |
RG5-1398-000CN |
Main drive assembly - Geared assembly includes shutter arm lever |
RG5-1410-000CN |
Transfer charge roller (Black) - In front door assembly |
RG5-1416-000CN |
Cassette size sensor board - Includes metal tabs and switches |
RG5-1417-000CN |
AC terminal board - Right side of Fuser Assembly plugs into this assembly |
RG5-1442-000CN |
Cable assembly - 4-pin (F) connector to 3-pin (F) connector - 31.1cm (12.3in) long |
RG5-1446-000CN |
Cable assembly - Large 8-pin (F) connector to small 8-pin (F) connector - 69.1cm (27.2in) long |
RG5-1447-000CN |
Cable - From DC controller board to registration and cassette paper pickup clutches |
RG5-1484-020CN |
Interface board |
RG5-1485-000CN |
Cable - From control panel to interface board |
RG5-1539-000CN |
Control panel assembly (100/120V) - Includes display and keypad |
RG5-1541-000CN |
Main top cover for HP LaserJet 4V Series |
RG5-1545-000CN |
Delivery guide assembly - Includes the six dual roller assemblies |
RG5-1550-000CN |
Right foot assembly - For the bottom of the printer |
RG5-1551-000CN |
Left foot assembly - For the bottom of the printer |
RG5-1552-000CN |
Fuser door - Folds down from main front door - Has a shaft with 8 rubber rollers and 6 gears along right side of door |
RG5-1555-050CN |
Paper guide assembly |
RG5-1559-050CN |
DC controller board |
RG5-1560-060CN |
Card cage - Directly underneath top cover - Small fan for main logic (Formatter) board attaches to this part |
RG5-1562-000CN |
Multi-Purpose input tray - Fold down front tray |
RG5-1566-000CN |
Drum drive assembly - White diagonal-toothed gears that drive the toner cartridge |
RG5-1576-000CN |
Registration roller (Rubber) - Includes gear on left end |
RG5-1577-020CN |
Guide plate (with foam pad attached) |
RG5-1691-000CN |
Feeder guide assembly - Ribbed plastic plate with sensor lever and media roller assembly |
RG5-1692-000CN |
Paper pickup assembly - Includes D-shaped pickup roller and solenoid |
RG5-1694-000CN |
Paper guide plate - For multipurpose paper tray |
RG5-1697-000CN |
Multi-Purpose input tray (Tray 1) - Fold down front cover |
RG5-1698-020CN |
Feeder guide assembly - Ribbed plastic plate with sensor lever and media roller assembly |
RG5-1699-000CN |
Power cord cover assembly - Power button and spring included |
RG5-1702-080CN |
Fusing roller assembly (For 100V to 120V operation) - Includes heating element and teflon sleeve |
RG5-1703-080CN |
Fusing roller assembly (For 220V to 240V operation) - Includes heating element and teflon sleeve |
RG5-1706-000CN |
Transfer guide assembly - Plate in front of transfer roller |
RG5-1707-020CN |
Face-up paper output tray assemblyy |
RG5-1709-000CN |
Top door assembly - Attaches to main top cover/case assembly |
RG5-1710-000CN |
Left side cover assembly - Includes interface connector cover, light pipe block, and infrared filter lens |
RG5-1712-000CN |
DC controller/power supply board case assembly - Includes plastic spring that holds cassette tray in printer and small connector board for cable from DC controller/power supply board |
RG5-1713-000CN |
Gear drive train plate assembly - 16 gears mounted on side plate |
RG5-1719-000CN |
High voltage DC controller/power supply connector assembly |
RG5-1780-000CN |
Laser/scanner assembly |
RG5-1786-000CN |
Mirror assembly - Top, center of print structure |
RG5-1799-000CN |
Main motor assembly |
RG5-1801-000CN |
Tubeaxial fan for HP LaserJet 5P Series |
RG5-1804-000CN |
Cable assembly for HP LaserJet 5P Series |
RG5-1808-000CN |
Small connector board |
RG5-1814-000CN |
Small media roller assembly - Mounts on the bottom of the plate in the feeder guide assembly |
RG5-1833-040CN |
Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle. |
RG5-1833-090CN |
Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it |
RG5-1834-000CN |
Feeder assembly - Transfer roller and registration assembly are mounted on this assembly |
RG5-1842-000CN |
Guide rear for HP 33491A |
RG5-1843-000CN |
Paper sensor cable - J11 to J15 |
RG5-1844-050CN |
DC controller board |
RG5-1845-000CN |
Paper size sensor board - Used to sense paper size in upper and lower paper trays |
RG5-1845-020CN |
Paper size sensor board - Used to sense paper size in upper and lower paper trays |
RG5-1846-000CN |
Switch/sensor board - Includes face down tray sensors, fusing delivery sensor and door switch |
RG5-1847-000CN |
Main print drive gear assembly |
RG5-1849-000CN |
Cable assembly - Fuser cable 1 - J50/51 to J10/56/222 |
RG5-1850-000CN |
Duplexer cable assembly - From duplexer to DC controller |
RG5-1852-490CN |
Paper pickup assembly - Includes pickup feed and separation rollers |
RG5-1852-BULK |
PAPER PICKUP ASSY - Paper pickup assembly - Includes pickup feed and separation rollers |
RG5-1859-000CN |
Sensor cable - PIU PS2 sensor cable - J13 to J1205 |
RG5-1860-000CN |
Paper pickup board - Includes 8 photosensors |
RG5-1861-000CN |
Cable assembly - 20-pin (F) connector on each end - 39.4cm (15.5in) long |
RG5-1870-090CN |
Top cover assembly - Does NOT include face up tray or control panel display |
RG5-1874-110CN |
Face down delivery assembly - Feeds paper to top of printer |
RG5-1874-170CN |
Face down delivery assembly - Feeds paper to top of printer |
RG5-1875-000CN |
Face Up solenoid assembly |
RG5-1878-000CN |
Low voltage power supply - 240VAC, 50Hz - Includes power switch, AC receptacle and DC power supply |
RG5-1880-100CN |
Paper pickup assembly Hewlett Packard Multi Purpose Pick Up Assembly |
RG5-1883-060CN |
Multi-Purpose paper input tray (Tray 1) - Includes pull out extender tray |
RG5-1884-000CN |
Multipurpose paper tray board - Includes paper sensors PS1301 and PS1302 |
RG5-1887-000CN |
Transfer Roller Assembly - Includes transfer guide bushings, transfer guide and transfer roller |
RG5-1888-150CN |
High voltage power supply assembly |
RG5-1895-000CN |
Laser/scanner assembly |
RG5-1915-040CN |
Right door assembly - Door below paper tray 1 - Support strap attached to right side |
RG5-1919-000CN |
Cable assembly - From DC controller board to main motor |
RG5-1920-000CN |
Cassette size sensor cable - Between cassette size sensor PCAs and formatter board |
RG5-1921-000CN |
Fan cable - Fan 3 power cable |
RG5-1923-000CN |
Cable assembly for HP LaserJet 5Si Series |
RG5-1924-000CN |
Dual cable assembly with ferrites - 10-pin (F) connector, 9-pin (F) connector, and two 6-pin (F) connectors - 1.1m (3.7ft) long |
RG5-1925-000CN |
Cable assembly - 5-pin (F) connector to both a 27cm (10.6in) cable with a 3-pin (M) connector and a 27.2cm (10.7in) cable with a 2-pin (M) connector |
RG5-1926-000CN |
BD cable - J18 to J2007 |
RG5-1927-000CN |
ILS cable - From J1401 to J221/J205 |
RG5-1928-000CN |
Registration cable assembly - Includes 7P and 3P connectors |
RG5-1942-000CN |
Feed assembly - Has idler roller, sensor flag and paper input sensors - PS 202/203 |
RG5-1944-050CN |
Paper input assembly - Rear half of input paper feed slot - Input assembly one |
RG5-1945-040CN |
Paper input assembly - Front half of paper input feed slot - Input assembly 2 |
RG5-1947-000CN |
Idler roller shaft assembly |
RG5-1961-000CN |
Transfer guide assembly (Ribbed plastic piece) - Mounting support for the transfer roller |
RG5-1964-020CN |
Heating element assembly (For 100VAC to 120VAC operation) - Hollow shaft with heating element inside - Yellow Warning hot label on top - Plastic sleeve not available separately |
RG5-1965-020CN |
Heating element assembly (For 220V to 240V operation) - Hollow shaft with heating element inside - Plastic sleeve not available separately |