Part |
Picture |
Description |
RG5-1965-020CN |
Heating element assembly (For 220V to 240V operation) - Hollow shaft with heating element inside - Plastic sleeve not available separately |
RG5-1984-000CN |
Interlock assembly - Detects if EP (Toner) door is open |
RG5-1995-000CN |
Main top cover - Front left corner has hole for Face-up/ Face-down selection switch - Does NOT include the paper input assemblies |
RG5-2004-000CN |
Laser/Scanner Assy - Mounts on Top of Internal Main Chassis |
RG5-2012-070CN |
Delivery assembly - Includes four white multi-ridged and two other delivery rollers and their associated springs |
RG5-2013-000CN |
Separation guide assembly - Includes the face-up/face-down paper selection lever/deflector and Fuser Assembly exit roller assembly |
RG5-2014-000CN |
Paper guide - Inside spur assembly |
RG5-2015-000CN |
Paper guide - Outside spur assembly |
RG5-2028-000CN |
Control panel - Small board on left side of printer |
RG5-2029-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2031-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2032-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2033-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2034-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2035-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2036-000CN |
Cable - From control panel to formatter board |
RG5-2037-000CN |
Cable assembly for HP LaserJet 5L Series |
RG5-2044-000CN |
High voltage power supply assembly |
RG5-2125-000CN |
Feed sensor/paper size board - Small PC board with four paper size micro-switches and the paper feed photo sensor - Mounts in the front left of the 250-sheet paper feeder assembly |
RG5-2150-000CN |
Back paper limit plate |
RG5-2151-000CN |
Middle paper limit plate - Paper width adjustment stop |
RG5-2155-000CN |
2000 sheet paper tray - Slide out tray - Includes cables to raise tray |
RG5-2156-000CN |
Front paper reference plate - Front length adjustment stop |
RG5-2164-030CN |
2000 sheet paper tray drive assembly |
RG5-2166-000CN |
Sensor PCA - Paper quantity sensor PCA |
RG5-2168-000CN |
Sensor PCA - Paper size sensor PCA |
RG5-2170-000CN |
2000 sheet paper tray paper pickup assembly |
RG5-2175-020CN |
Transfer assembly - Mounted on right side of 2000 sheet tray |
RG5-2186-000CN |
Top cover assembly - Includes hinges, top cover, and top door |
RG5-2189-000CN |
Paper output assembly - Belt driven PAPER DELIVERY ASSEMBLY |
RG5-2189-080CN |
Paper output assembly - Belt driven PAPER DELIVERY ASSEMBLY |
RG5-2192-000CN |
Transfer guide assembly - Ribbed paper guide for the high voltage transfer roller (Does NOT include transfer roller) |
RG5-2195-000CN |
Paper pickup (Feeder) assembly (Motor driven) |
RG5-2199-000CN |
Multi-Purpose input tray - Attaches to front door |
RG5-2209-000CN |
Lower cassette drive assembly (drive motor and gears) |
RG5-2225-000CN |
2000 sheet tray paper sensor board |
RG5-2226-000CN |
2000 sheet tray paper size board |
RG5-2238-000CN |
Control panel board (with display) - Does NOT include the panel overlay or display window |
RG5-2248-030CN |
Guide plate assembly - Includes multipurpose tray pickup roller and motor, sensor (PS1), solenoid (SL1), and gear assemblies that are on pickup roller/motor shaft |
RG5-2281-000CN |
Power supply for 2000 sheet paper tray |
RG5-2433-000CN |
Control panel - Includes display |
RG5-2499-000CN |
Power supply assembly - 100-120VAC input |
RG5-2500-000CN |
Power supply assembly - 220/240VAC |
RG5-2641-000CN |
Laser/scanner assembly |
RG5-2642-000CN |
Registration and feed sensors assembly - Includes PS102/103 |
RG5-2643-020CN |
Paper feed guide assembly |
RG5-2643-160CN |
Paper feed guide assembly |
RG5-2645-000CN |
Right side top cover support assembly |
RG5-2648-110CN |
Paper delivery assembly |
RG5-2650-000CN |
Delivery sensor arm assembly |
RG5-2651-090CN |
Paper feed assembly |
RG5-2652-070CN |
Registration assembly |
RG5-2652-170CN |
Registration assembly |
RG5-2653-020CN |
Print drive gear assembly |
RG5-2655-100CN |
Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid |
RG5-2655-360CN |
Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid |
RG5-2656-080CN |
Paper input tray (Tray 1) - Multi-Purpose tray assembly |
RG5-2661-000CN |
Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
RG5-2661-490CN |
Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation |
RG5-2662-500CN |
Fuser Assembly - 220 volts |
RG5-2663-040CN |
Top Cover Assembly - Does Not Include Control Panel |
RG5-2663-090CN |
Plate cover for HP LaserJet 4100 Series |
RG5-2664-070CN |
Right front cover assembly - Mounts bedie the formatter panel |
RG5-2665-000CN |
Left side cover assembly - Includes panel retainer clip |
RG5-2666-000CN |
Control Panel - Does Not Include Overlay |
RG5-2668-120CN |
Right side feeder cover |
RG5-2669-050CN |
Feeder cover left side - Tray 2 |
RG5-2670-000CN |
Lower base plate - Bottom plate of 500 sheet feeder |
RG5-2672-000cn |
500 sheet paper pickup drive assembly |
RG5-2672-140CN |
500 sheet paper pickup drive assembly |
RG5-2673-000CN |
Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN). |
RG5-2677-000CN |
Upper right cover assembly |
RG5-2678-000CN |
Upper left cover assembly |
RG5-2679-000CN |
Right lower side feeder cover assembly |
RG5-2680-000CN |
Left lower feeder cover assembly |
RG5-2682-000CN |
Middle frame assembly - Sits between the upper and lower 2 x 250 module tray cavities |
RG5-2683-000CN |
Upper paper pickup drive assembly - 250 sheet |
RG5-2684-000CN |
Lower paper pickup drive assembly - 250 sheet |
RG5-2685-000CN |
Feeder control board Lower tray logic PCA - With tray size switches for 250 sheet feeder. ( for 500 sheet feeder RG5-2673-000CN). |
RG5-2687-000CN |
Right side frame assembly |
RG5-2688-000CN |
Left side frame assembly |
RG5-2689-030CN |
Upper frame assembly |
RG5-2690-000CN |
Optional 500 sheet paper pickup drive assembly |
RG5-2734-000CN |
Envelope weight assembly - Pivot mount and tension weight |
RG5-2774-000CN |
DC controller/power supply board Case assembly - Includes plastic spring that holds cassette tray in printer and small connector board for cable from DC controller/power supply board |
RG5-2776-000CN |
Tubeaxial fan for HP LaserJet 6P Series |
RG5-2778-000CN |
Gear drive train plate assembly - 16 gears mounted on side plate |
RG5-2779-000CN |
Power cord cover assembly - Power button and spring included |
RG5-2780-000CN |
Left side cover assembly - Includes interface connector cover, light pipe block, and infrared filter lens |
RG5-2782-000CN |
Top door assembly - Attaches to main top cover/case assembly |
RG5-2784-000CN |
Face-up paper output tray assembly - Includes main tray that attaches to printer ribbed flapper part, and slide out extension tray |
RG5-2785-000CN |
Multi-Purpose input tray (Tray 1) - Fold down front cover |
RG5-2786-000CN |
Main motor assembly |
RG5-2790-000CN |
Paper pickup assembly - Includes pickup roller assembly, guide plate, solenoid, photo sensor (PS5) photo sensor cable, and separation pad |
RG5-2791-000CN |
Paper pickup roller - Includes pickup roller |
RG5-2796-000CN |
Paper pickup assembly - Includes D-shaped pickup roller and solenoid |
RG5-2802-000CN |
Fusing roller assembly (For 100V to 120V operation) - Includes heating element and teflon sleeve |
RG5-2803-080CN |
Fusing roller assembly (For 220V to 240V operation) - Includes heating element and teflon sleeve |
RG5-2826-040CN |
DC controller/power supply board - For 100 to 120V operation |
RG5-2827-040CN |
DC controller/power supply board - For 220 to 240V operation |
RG5-2828-000CN |
Small connector board |
RG5-2848-000CN |
Laser/scanner assembly |
RG5-2959-000CN |
Contact sensor - Contact sensor - For LaserJet Companion |
RG5-3104-000CN |
Cable assembly for HP Color LaserJet 8550 Series |
RG5-3144-000CN |
Cable assembly for HP Color LaserJet 8550 Series |
RG5-3147-000CN |
Cable assembly for HP Color LaserJet 8550 Series |
RG5-3443-000CN |
Main top cover - Front left corner has hole for Face-up/ Face-down selection switch - Does NOT include the paper input assemblies |
RG5-3452-000CN |
Transfer guide assembly (Ribbed plastic piece) - Mounting support for the transfer roller |
RG5-3453-000CN |
Interlock assembly - Detects if EP (Toner) door is open |
RG5-3459-040CN |
Heating element assembly (For 100V to 120V operation) - Bonds the toner to the paper with heat |
RG5-3463-000CN |
Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |