| Part |
Picture |
Description |
| RG5-4617-000CN |
Sensor cable - Connects J211, J003 and J004 |
| RG5-4618-000CN |
Motor cable - J007 to J401 |
| RG5-4619-000CN |
Thermistor cable - J008 to J206 |
| RG5-4620-000CN |
Display cable - Connects J1 to J901 on status display |
| RG5-4657-000CN |
Transfer roller assembly - Includes drive gear |
| RG5-4678-000CN |
Heating element assembly (For 100V to 120V operation) - Bonds the toner to the paper with heat |
| RG5-4681-000CN |
Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |
| RG5-4690-000CN |
ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 110V |
| RG5-4691-000CN |
ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 220V |
| RG5-4726-000CN |
Cable assembly for HP LaserJet 8000 Series |
| RG5-4728-000CN |
Assy Cover for HP C4064A |
| RG5-4763-000CN |
Single sheet input slot - Manual feed tray |
| RG5-4768-000CN |
Upper paper guide - Guides paper through scanner path |
| RG5-4769-000CN |
Control panel assembly |
| RG5-4770-000CN |
Printer door assembly |
| RG5-4771-000CN |
Document scanner assembly - Includes motor, rollers and guides - Does NOT include image sensor assembly |
| RG5-4772-000CN |
Paper pickup roller assembly for document scanner |
| RG5-4811-000CN |
Laser/scanner assembly |
| RG5-4914-000CN |
Paper feed belt assembly |
| RG5-4916-000CN |
Registration roller assembly |
| RG5-5063-180CN |
Printer Fuser Assembly - 110 Volts for 4100 series |
| RG5-5063-340CN |
Fuser Assembly - 110 volts Fuser Assembly - For 110 VAC operation - Bonds toner to the paper by heat |
| RG5-5064-180CN |
Fuser Assembly - For 220 VAC operation - Bonds toner to the paper by heat |
| RG5-5064-300CN |
Fuser Assembly - For 220 VAC operation - Bonds toner to the paper by heat |
| RG5-5064-340CN |
Fuser Assembly - 220 volts |
| RG5-5068-090CN |
Fusing roller - Heating element and film sleeve - 110V |
| RG5-5069-000CN |
Fusing Roller - Heating Element and Film Sleeve - 220V |
| RG5-5069-090CN |
Fusing roller - Heating element and film sleeve - 220V |
| RG5-5072-000CN |
Tray 2 upper frame assembly |
| RG5-5083-000CN |
Paper feed guide assembly |
| RG5-5083-020CN |
Paper feed guide assembly |
| RG5-5084-040CN |
Tray 1 paper pickup assembly |
| RG5-5085-000CN |
Registration assembly |
| RG5-5086-000CN |
Paper feed assembly |
| RG5-5087-000CN |
Print drive gear assembly |
| RG5-5093-000CN |
Delivery sensor arm assembly |
| RG5-5094-050CN |
Paper delivery assembly |
| RG5-5094-060CN |
Paper delivery assembly |
| RG5-5095-000CN |
Delivery drive assembly |
| RG5-5097-000CN |
Drop down rear output tray |
| RG5-5098-000CN |
Left side cover assembly - Includes panel retainer clip |
| RG5-5100-000CN |
Laser Scanner Assembly HP Laserjet 4100 series products. |
| RG5-5100-080CN |
Laser/scanner assembly |
| RG5-5111-000CN |
AC power receptacle - Connector and housing assembly - 110VAC |
| RG5-5268-000CN |
Control panel - Includes display |
| RG5-5273-000CN |
Antenna assembly |
| RG5-5274-000CN |
Front right side inner cover assembly |
| RG5-5275-000CN |
Registration and feed sensors assembly - Includes PS 102/103 |
| RG5-5276-000CN |
Toner cartridge memory transceiver assembly - Provides communication between memory controller board and toner cartridge memory |
| RG5-5277-000CN |
Tray 2 pickup assembly |
| RG5-5278-000CN |
Right side tray 2 frame assembly with paper size PCB |
| RG5-5280-000CN |
AC power receptacle - Connector and housing assembly - 220VAC |
| RG5-5281-020CN |
Separation pad assembly, with black pastic arms. Pad is for Tray 1 pickup assembly |
| RG5-5291-000CN |
Right side frame assembly |
| RG5-5292-000CN |
Left side frame assembly |
| RG5-5293-000CN |
Optional 500 sheet paper pickup drive assembly |
| RG5-5295-000CN |
Transfer roller assembly |
| RG5-5298-000CN |
Front cover of automatic document feeder |
| RG5-5341-000CN |
Cable assembly for HP LaserJet 4100 Series |
| RG5-5343-000CN |
Paper feed and tray 1 pickup solenoid cable |
| RG5-5344-000CN |
Envelope feeder cable with connector |
| RG5-5345-000CN |
Top cover switch cable |
| RG5-5346-000CN |
Main motor cable |
| RG5-5348-000CN |
Cable assembly - A 7-pin (F) connector to both a 27.9cm (11in) cable with a 4-pin (F) connector and a 36.8cm (14.5in) cable with a 3-pin (F) connector |
| RG5-5349-000CN |
Cable assembly - 13-pin (F) connector to 12-pin (F) connector - 30.8cm (12.1in) long |
| RG5-5350-000CN |
Laser/scanner assembly laser cable |
| RG5-5351-000CN |
Formatter assembly cable |
| RG5-5357-000CN |
Feed/registration sensor assembly cable |
| RG5-5358-000CN |
Duplexer cable for HP LaserJet 4100 Series |
| RG5-5359-060CN |
Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
| RG5-5359-240CN |
Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate |
| RG5-5360-050CN |
Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate |
| RG5-5372-050CN |
Control panel - Does not include overlay |
| RG5-5387-000CN |
Metal clip - Left side of fusing roller |
| RG5-5388-000CN |
Fusing clip for HP LaserJet 3200 Series |
| RG5-5391-000CN |
Internal paper guide |
| RG5-5392-000CN |
Hinge support assembly - For printer door assembly |
| RG5-5393-000CN |
Formatter and LIU PC board case |
| RG5-5395-000CN |
ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 110V |
| RG5-5397-000CN |
ECU board - Engine controller unit/power system controller board - Logic and power supply combined PCA - 220/240VAC |
| RG5-5399-000CN |
Scanner document feeder assembly |
| RG5-5400-000CN |
Document feeder motor |
| RG5-5401-000CN |
Pickup roller assembly - Pickup roller for doucument feeder |
| RG5-5402-000CN |
Scanner paper feed guide |
| RG5-5404-000CN |
Separation pad assembly - Separation pad with holder mech |
| RG5-5405-000CN |
Ribbon cable with ferrite - Has two 12-pin (M) edge connectors - Overall length is 23.5cm (9.3in) |
| RG5-5406-030CN |
Control panel assembly - Top front portion of printer with keypads, display assembly, control panel PC board and upper paper guide assembly |
| RG5-5410-000CN |
Image scanner assembly |
| RG5-5411-000CN |
Printer door assembly - Installs at the top of the printer, where the control panel is located |
| RG5-5412-000CN |
Deflector link - Arm attaches to paper deflector |
| RG5-5415-000CN |
Cable assembly for HP LaserJet 3200 Series |
| RG5-5421-000CN |
Laser/scanner assembly |
| RG5-5438-030CN |
Control panel - Does not include overlay |
| RG5-5453-090CN |
Fusing roller assembly - Fusing roller/heating element assembly - 110 volt |
| RG5-5455-000CN |
Fuser Assembly - 110 Volts |
| RG5-5455-100CN |
Fuser Assembly - 110 volts |
| RG5-5456-100CN |
Fuser Assembly - 220 volts, Fusing assembly - For 220 VAC operation - Bonds toner to the paper with heat |
| RG5-5464-000CN |
Image scanner sensor PC board |
| RG5-5470-000CN |
Cable assembly - Has two 10-pin (F) connectors - 33.0cm (13in) long |
| RG5-5471-000CN |
Cable assembly for HP LaserJet 4100 Series |
| RG5-5473-000CN |
Laser/scanner assembly |
| RG5-5481-000CN |
Transfer guide - Transfer roller attaches to this block |
| RG5-5483-000CN |
Pickup roller assembly |
| RG5-5489-000CN |
DC controller/power supply board (240VAC) |
| RG5-5517-001CN |
Heating element assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat |
| RG5-5522-000CN |
Feed assembly - Includes idler roller, sensor flag and paper input sensor |
| RG5-5539-000CN |
Lower tray logic PCA - With tray size switches |
| RG5-5541-000CN |
Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
| RG5-5542-000CN |
Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
| RG5-5542-050CN |
Face down delivery roller assembly - Middle two roller assemblies in center of top output bin |
| RG5-5545-040CN |
DIMM cover assembly - Right side cover - Includes I/O cover on right rear and optical filter cover on right front |
