| Part |
Picture |
Description |
| RG5-5545-040CN |
DIMM cover assembly - Right side cover - Includes I/O cover on right rear and optical filter cover on right front |
| RG5-5546-000CN |
Rear cover - Includes face-down output tray assembly |
| RG5-5548-000CN |
Reverse guide assembly - Guides paper back into printer to print back side when in duplex mode. |
| RG5-5549-000CN |
Left cover assembly - Includes power button and spring |
| RG5-5552-000CN |
Duplex solenoid assembly - Solenoid and clutch assembly to engage and disengage duplexer |
| RG5-5553-000CN |
Position guide assembly (Plate with drive gear and rollers) |
| RG5-5554-050CN |
Duplex feed guide assembly |
| RG5-5555-020CN |
Feed roller assembly |
| RG5-5556-000CN |
Registration assembly - Registration shutter and roller with holder frame assembly |
| RG5-5559-000CN |
Fusing Roller Assembly (For 100V to 120V Operation) - Bonds |
| RG5-5559-110CN |
Fusing roller assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-5560-060CN |
Fusing Roller Assembly (For 100V to 120V Operation) - |
| RG5-5560-070CN |
Fusing roller - (For 110V to 120V operation) - Includes heating element and fixing sleeve only |
| RG5-5561-000CN |
Upper delivery guide - Has four separate rollers and springs |
| RG5-5562-000CN |
Printer Drive Assembly - Gear Assembly on Right Side |
| RG5-5562-050CN |
Printer drive assembly |
| RG5-5563-050CN |
Power supply board - For 100V-127V operation |
| RG5-5565-000CN |
Power receptacle - Power input receptacle and cable to power supply |
| RG5-5566-000CN |
Engine controller PC board |
| RG5-5568-000CN |
Cable and guide assembly |
| RG5-5569-110CN |
Fusing roller assembly (For 220V to 240V operation) - Bonds toner to paper with heat |
| RG5-5570-070CN |
Fusing roller - (For 220V to 240V operation) - Includes heating element and fixing sleeve only |
| RG5-5573-050CN |
Power supply board - For 220-240V operation |
| RG5-5575-000CN |
Tray 1/MP Tray assembly - Drop down tray on front of printer |
| RG5-5576-000CN |
Multi-purpose paper input tray assembly (MP Tray, Tray one) |
| RG5-5577-000CN |
Gear assembly - Drives paper transfer belt assembly |
| RG5-5580-060CN |
250 sheet paper tray |
| RG5-5581-000CN |
Transfer roller assembly - Includes left side bushing |
| RG5-5583-000CN |
Sensor cable - Cable for PS1305 - Paper detection |
| RG5-5591-000CN |
Laser/scanner assembly |
| RG5-5598-000CN |
Paper-feed cable - Includes the interface cable from the engine controller PC board to the accessory paper tray connector and the engine controller PC board ground cable. |
| RG5-5599-000CN |
Interface cable - The I/F cable from the Engine Controller PCA to the accessory paper tray connector - Six conductor/three connector cable |
| RG5-5600-000CN |
Grounding cable - Engine Controller PCA ground cable |
| RG5-5623-000CN |
500 Sheet paper tray assembly - Holds 500 sheets of Letter and A4 size paper |
| RG5-5635-080CN |
500-sheet paper cassette - Paper cassette used for tray 2 and tray 3 |
| RG5-5635-110CN |
500-sheet paper cassette - Paper cassette used for tray 2 and tray 3 |
| RG5-5642-040CN |
Delivery assembly - The MFP has no actual delivery assembly - This part is actually the fan housing which has two fans and includes spacers on top to provide spacing between the scan engine and print engine |
| RG5-5643-030CN |
Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the L shaped metal support structure with three fans |
| RG5-5643-060CN |
Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the L shaped metal support structure with three fans |
| RG5-5643-080CN |
Delivery assembly - Includes the curved plastic structure, various rollers and gears, and the 'L' shaped metal support structure with three fans |
| RG5-5645-000CN |
Delivery cross member assembly - Includes the L shaped support bracket with the rear delivery fan (Fan 3), front delivery fan (Fan 4), and face down tray fan (Fan 6) |
| RG5-5645-020CN |
Delivery cross member assembly - Includes the 'L' shaped support bracket with the rear delivery fan (fan 3), front delivery fan (fan 4), and face down tray fan (fan 6) |
| RG5-5646-000CN |
Left Door and diverter assembly. HP Left Door Assembly Includes Face-up Delivery Assembly for HP LaserJet 9000 / 9000 / 9040 / 9050 compatible Multi Function Printer |
| RG5-5646-050CN |
Left Door and diverter assembly. HP Left Door Assembly Includes Face-up Delivery Assembly for HP LaserJet 9000 / 9000 / 9040 / 9050 compatible Multi Function Printer. |
| RG5-5646-070CN |
Left Door and diverter assembly. HP Left Door Assembly Includes Face-up Delivery Assembly for HP LaserJet 9000 / 9000 / 9040 / 9050 compatible Multi Function Printer |
| RG5-5647-050CN |
Face-up delivery assemblyFace-up delivery assembly |
| RG5-5647-070CN |
Face-up delivery assemblyFace-up delivery assembly |
| RG5-5648-000CN |
Left door damper assembly |
| RG5-5648-020CN |
Left door damper assembly |
| RG5-5649-000CN |
Delivery assembly PC board |
| RG5-5651-000CN |
Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly |
| RG5-5651-030CN |
Transfer guide assembly (Ribbed plastic piece) - Has slot for the transfer roller assembly |
| RG5-5653-000CN |
Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in |
| RG5-5653-030CN |
Transfer roller holder assembly - Includes the base structure, latch, anti-static brush, pressure springs, bushings, and contact springs - Assembly that the transfer roller mounts in |
| RG5-5654-000CN |
Transfer roller guide - Mounts to the top of the base structure of the transfer roller assembly |
| RG5-5656-060CN |
Drum feed drive assembly |
| RG5-5656-080CN |
Drum feed drive assembly |
| RG5-5659-000CN |
Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller |
| RG5-5659-070CN |
Fuser delivery drive assembly - Includes gears, motor and microswitch for fuser drive - Also drives delivery roller |
| RG5-5662-000CN |
Transfer roller assembly w/holder - Includes transfer guides holder chrome plate and transfer roller unit HP LaserJet 9000/9040/9050. |
| RG5-5662-050CN |
Transfer roller assembly w/holder - Includes transfer guides holder chrome plate and transfer roller unit. |
| RG5-5663-000CN |
Registration roller assembly |
| RG5-5663-060CN |
Registration roller assembly |
| RG5-5678-000CN |
Paper pickup board |
| RG5-5679-000CN |
Cable assembly for HP LaserJet 9000 Series |
| RG5-5681-030CN |
Paper input whole unit assembly - For printer/engine. PIU Paper Input Unit for LaserJet 9000 / 9000MFP / M9040 / M9050 / 9040 MFP / 9050 MFP and compatible units. |
| RG5-5681-090CN |
Paper input whole unit assembly - For printer/engine. PIU Paper Input Unit for LaserJet 9000 / 9000MFP / M9040 / M9050 / 9040 MFP / 9050 MFP and compatible units. |
| RG5-5681-100CN |
Paper input whole unit assembly - For printer/engine. PIU Paper Input Unit for LaserJet 9000 / 9000MFP / M9040 / M9050 / 9040 MFP / 9050 MFP and compatible units. |
| RG5-5684-000CN |
Fuser Assembly - For 100 VAC to 127 VAC - Bonds toner to paper with heat |
| RG5-5699-000CN |
End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches |
| RG5-5699-040CN |
End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches |
| RG5-5700-000CN |
RG5-5700-000CN Jam Clearing Assembly Fuser - HP LaserJet 9000/9040/9050 Fuser jam removal knob |
| RG5-5700-030CN |
RG5-5700-000CN Jam Clearing Assembly Fuser - HP LaserJet 9000/9040/9050 Fuser jam removal knob |
| RG5-5701-000CN |
Rear cover assembly |
| RG5-5702-000CN |
Front cover assembly - Large door above trays 2 and 3 |
| RG5-5702-050CN |
Front cover assembly - Large door above trays 2 and 3 |
| RG5-5703-000CN |
Control Panel Assembly for HP LaserJet 9000 9040 9050 series models. |
| RG5-5703-060CN |
Control Panel Assembly |
| RG5-5704-000CN |
Latch mount assembly |
| RG5-5704-040CN |
Latch mount assembly |
| RG5-5705-000CN |
Left upper cover - Small cover above left door |
| RG5-5705-030CN |
Left upper cover - Small cover above left door |
| RG5-5706-000CN |
Left upper cover assembly - Small rectangular cover that mounts between the top of the printer and the paper output tray |
| RG5-5709-000CN |
Front pressure mount for toner cartridge |
| RG5-5710-000CN |
Rear pressure mount for toner cartridge |
| RG5-5713-000CN |
Left upper rail assembly |
| RG5-5713-020CN |
Left upper rail assembly |
| RG5-5714-000CN |
Left lower rail assembly |
| RG5-5714-020CN |
Left lower rail assembly |
| RG5-5715-000CN |
Right rail assembly |
| RG5-5715-030CN |
Right rail assembly |
| RG5-5717-000CN |
Toner cartridge contact assembly |
| RG5-5717-020CN |
Toner cartridge contact assembly |
| RG5-5718-000CN |
Cartridge guide rail - Right side toner cartridge guide rail |
| RG5-5719-000CN |
Memory controller PC Board |
| RG5-5719-100CN |
Memory controller PC Board - Toner cartridge |
| RG5-5721-000CN |
Front inside cover - Cover behind front drop down cover |
| RG5-5722-000CN |
Main cable harness and holder assembly |
| RG5-5722-030CN |
Main cable harness and holder assembly |
| RG5-5723-000CN |
Upper cable guide assembly |
| RG5-5724-020CN |
Fuser connector holder assembly |
| RG5-5724-050CN |
Fuser connector holder assembly |
| RG5-5725-030CN |
Fan control cable - Includes cable and holder - On back of printer routes cable around DC controller PC board |
| RG5-5727-000CN |
A/C power input receptacle module and power switch |
| RG5-5727-030CN |
A/C power input receptacle module and power switch |
| RG5-5728-050CN |
High voltage power supply board |
| RG5-5728-100CN |
High voltage power supply board - Mounts on the upper rear of the printer |
| RG5-5729-000CN |
Tubeaxial fan for HP LaserJet 9040 9050 Series |
| RG5-5730-000CN |
Low voltage power supply assembly - For 100V to 127VAC operation - Mounts on the upper rear of the printer |
| RG5-5731-000CN |
Low voltage power supply - 220V |
| RG5-5734-000CN |
Display Panel AssemblyControl panel assembly - Control buttons and display located on the ADF/scanner assembly |
