Part |
Picture |
Description |
RK2-2728-000CN |
Delivery Fan (FM3) - Provides air to the paper delivery area |
RK2-2729-000CN |
Solenoid (SL2) - Controls paper pick-up roller for tray 2 |
RK2-2731-000CN |
24V DC Solenoid (SL1) - Engages the pickup roller gear/clutch assembly for tray 1 (250-sheet tray) |
RK2-2733-000CN |
Solenoid (SL3) - Duplexer solenoid |
RK2-2788-000CN |
Flat cable - Conects the tray 2 casette pick-up solenoid (SL2) to the formatter |
RK2-3101-000CN |
Cble flat for HP CE527A |
RK2-3103-000CN |
Cble flat for HP CE527A |
RK2-3206-000CN |
Flat flexible cable - Connects on the DC controller PC board |
RK2-3214-000CN |
Low-voltage power supply fan (FN104) - Cools the low-voltage power supply area |
RK2-3241-000CN |
USB cable - Type A connector to type B connector |
RK2-3244-000CN |
Cooling Fan (Fm2) - Provides Air To The Cartridge Area For Cooling |
RK2-3267-000CN |
Temperature sensor assembly |
RK2-3438-000CN |
Fan for HP CE538A |
RK2-3846-000CN |
Usb Connector PCa Assembly |
RK2-3847-000CN |
Cooling Fan - Provides Air To The Cartridge Area |
RK2-3941-000CN |
Laser/scanner flat flexible cable |
RK2-3943-000CN |
Scanner laser flat cable - Connects the scanner to the DC controller PC board |
RK2-4077-000CN |
Flat Flexible Cable (Ffc) - Connects The Intermediate PCa To Formatter PCa |
RK2-4078-000CN |
Tray 2 Cassette Pick-Up Solenoid (Sl101) |
RK2-4255-000CN |
Printer fan Main Fan - LJ Pro M251 / M276 / MF8280 Series |
RK2-4291-000CN |
Fixing Motor |
RK2-4490-000CN |
21-Pin Flat Flexible Cable |
RK2-4492-000CN |
23-Pin Flat Flexible Cable |
RK2-4494-000CN |
Cable Flexible Flat 25p |
RK2-4496-000CN |
15-Pin Flat Flexible Cable |
RK2-4915-000CN |
15-pin flat flexible cable |
RK2-4997-000CN |
Cooling fan (FAN1) |
RK2-5004-000CN |
Cooling fan (FAN9) assembly |
RK2-5013-000CN |
Flexible flat cable |
RK2-6259-000CN |
Flat flexible cable |
RK2-6260-000CN |
Flat flexible cable |
RK2-6261-000CN |
Flat flexible cable |
RK2-6506-000CN |
USB cable - Type-A plug to type-B plug |
RK2-6509-000CN |
Low voltage power supply fan (FN104) |
RK2-6761-000CN |
HIP cable |
RK2-6768-000CN |
Flat flexible cable |
RK2-7067-000CN |
USB cable |
RK2-7104-000CN |
Hardware integration pocket (HIP) cable assembly - For the M506 printer series |
RK2-7601-000CN |
Solenoid |
RK2-7885-000CN |
Duplexer DC24V motor (M1501) |
RK2-8068-000CN |
Fan (FM1) assembly |
RL1-0007-000CN |
Tray 1 paper separation pad |
RL1-0012-020CN |
Paper lifting plate - Metal plate in the bottom of cassette - Seperation pad included |
RL1-0013-000CN |
Swing plate - Pivot mount for pickup roller shaft |
RL1-0015-000CN |
Kicker assembly - Mounts to right side of the printer and is connected to the right side guide - Senses when the paper cassette is inserted into the printer |
RL1-0019-000CN |
Tray 1 pickup roller - D-shaped roller located under the envelope cover |
RL1-0045-020CN |
Release hook shaft support - Right side release shaft frame - Also frame for release hook gears on right side |
RL1-0158-000CN |
Sensor lever holder - Automatic Duplexer pickup sensor (PS503) |
RL1-0171-000CN |
Pad holder - Separation pad holder on front of tray |
RL1-0264-000CN |
Gear - Gear with attached shaft - Driven by pickup drive assembly on right front of printer |
RL1-0266-000CN |
Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray |
RL1-0303-000CN |
Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray |
RL1-0358-000CN |
Front cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly |
RL1-0359-000CN |
Scanner support frame - C-shaped plastic frame that mounts to the top of the printer - Has rear hinge pins for the top cover and scanner assembly, and recesses for the scanner link arms, lift springs and cushions |
RL1-0375-000CN |
Scanner base frame assembly - Bottom support chassis of the scanner assembly - All of the scanner component parts mount on this frame |
RL1-0376-000CN |
Scanner ground plane (or sheet) - Flexible sheet that runs from the ground PC board on the right side of the scanner assembly to the top of the printer chassis |
RL1-0434-000CN |
Stopper - Front cover lock stopper |
RL1-0436-000CN |
Damper support - Metal support bracket that attaches to printer chassis that supports bottom of gas damper |
RL1-0455-000CN |
Envelope feeder cover |
RL1-0457-000CN |
Front corner cover - Front cover for scanner portion of printer |
RL1-0462-000CN |
Flag - Output bin full flag |
RL1-0462-020CN |
Full detect flag |
RL1-0506-000CN |
Solenoid (Sl1102) - Located On The Stapler/Stacker Middle Assembly |
RL1-0527-000CN |
Top output bin delivery roller assembly - Plastic rod with four rubber wheels (two narrow and two wide) |
RL1-0540-000CN |
Paper pickup roller - Includes the D shaped pickup roller spindle with the rubber tire - Does NOT include (RC1-3470-000CN) the idler rollers on each side of the pickup roller |
RL1-0540BULK100 |
Roller paper pickup |
RL1-0542-000CN |
Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
RL1-0568-000CN |
Tray 1/MP Tray pickup roller - D-shaped replacement pickup roller |
RL1-0569-000CN |
Tray 1/MP tray pickup roller - D-shaped replacement pickup roller |
RL1-0580-000CN |
Face down output roller - Paper exit roller - Black plastic shaft with four rollers attached |
RL1-0581-000CN |
Transfer plate - Paper guide plate that mounts under transfer roller assembly |
RL1-0587-000CN |
Main motor - 26.2 watt DC motor on lower right side of printer - Motor M1 |
RL1-0784-000CN |
Front cover - Has recess for the printer nameplate and large cutout for the input paper tray |
RL1-0815-000CN |
Unknown Keyword for HP LaserJet 1020 Printer, LaserJet 1020 Series |
RL1-0915-000CN |
Paper pickup roller - MP/Tray 1 paper pickup roller |
RL1-0938-000CN |
Guide, top for HP LaserJet 5200 series |
RL1-0951-000CN |
Gear support plate - Holds 133-tooth gear, 73-tooth gear, 96/52-tooth gear, 99/40-tooth gear, 43-tooth gear, and 26-tooth gear |
RL1-0967-000CN |
Support, fixing drive gear |
RL1-1160-000CN |
Front cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly |
RL1-1161-000CN |
Scanner support frame - C-shaped plastic frame that mounts to the top of the printer - Has rear hinge pins for the top cover and scanner assembly, and recesses for the scanner link arms, lift springs and cushions |
RL1-1206-000CN |
Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
RL1-1289-000CN |
Paper pick-up roller - For the 1 x 500-sheet and 3 x 500-sheet paper input tray |
RL1-1367-000CN |
Right front cover - Vertical plastic cover - Mounts on the right front of the printer |
RL1-1370-000CN |
Paper pickup roller - Picks up media from the paper input tray. |
RL1-1390-000CN |
Right rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI) |
RL1-1391-000CN |
Left rail - Rail that the cassette tray mounts to - Located on the 1x500 high capacity input (HCI |
RL1-1430-000CN |
Front cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly |
RL1-1431-000CN |
Scanner support frame - C-shaped plastic frame that mounts to the top of the printer - Has rear hinge pins for the top cover and scanner assembly, and recesses for the scanner link arms, lift springs and cushions |
RL1-1442-000CN |
Small Paper pickup D size roller - Picks up media from the paper input tray - for HP LaserJet Printer models |
RL1-1450-000CN |
24VDC scanner stepper motor - Provides the drive to move the scanner optical assembly back and forth |
RL1-1497-000 |
Paper pick-up roller - Black ´D´ shaped roller - Picks media from paper input tray |
RL1-1497-000CN |
D-shaped pick-up roller - Located on the paper pick-up assembly |
RL1-1506-000CN |
Front cover assembly - For the LaserJet P1500 printer series |
RL1-1524-000CN |
Multipurpose paper input tray separation pad |
RL1-1525-000CN |
Multipurpose paper input tray pick-up roller |
RL1-1529-000CN |
Left side cover assembly - For the LaserJet P2010 printer series |
RL1-1530-000CN |
Right side cover assembly - For the LaserJet P2010 printer series |
RL1-1586-000CN |
Front cover for HP LaserJet 1018 Series |
RL1-1641-000CN |
Multi-purpose/tray 1 paper pick-up roller |
RL1-1654-000CN |
Multi-purpose/tray 1 separation roller |
RL1-1654-020CN |
Multi-Purpose/Tray 1 Separation Roller |
RL1-1657-000CN |
Feed DC motor (M101) 24V - Drives the cassette pick-up roller, multi-purpose/tray 1 pickup roller, feed roller,and rollers for the input accessory |
RL1-1657-020CN |
Feed DC motor (M101) 24V - Drives the cassette pick-up roller, multi-purpose/tray 1 pickup roller, feed roller,and rollers for the input accessory |
RL1-1658-000CN |
Retard drive shaft - Mounts on the right front guide assembly |
RL1-1659-000CN |
Drum DC motor (M102) 24V - Drives the transfer charging roller, photosensitive drum, and developing cylinder |
RL1-1659-010CN |
Drum DC motor (M102) 24V - Drives the transfer charging roller, photosensitive drum, and developing cylinder |
RL1-1663-000CN |
Multi-purpose/tray 1 feed roller |
RL1-1667-000CN |
Envelope cover for HP LaserJet P4014 Printer |
RL1-1703-000CN |
Left Support - Located On The Stapler/Stacker Assembly |
RL1-1704-000CN |
Right Support - Located On The Stapler/Stacker Assembly |
RL1-1709-000CN |
Multi-Bin Mailbox Solenoid (Sl1302 Sl1303 Sl1304 Sl1305) |