Part |
Picture |
Description |
RM1-1573-000CN |
Laser/scanner assembly |
RM1-1573-040CN |
Laser/scanner assembly |
RM1-1574-000CN |
Front gas damper assembly |
RM1-1575-000CN |
Rear gas damper assembly |
RM1-2033-000CN |
Laser/scanner assembly - Mounts on the front support shelf on the printer frame assembly - Mounts just below the engine control unit PC board |
RM1-2033-030CN |
Laser/scanner assembly - Mounts on the front support shelf on the printer frame assembly - Mounts just below the engine control unit PC board |
RM1-2035-000CN |
Paper input tray assembly - Includes the fold-down tray, paper stop, and tray extender - Mounts to the bottom of the opening on the front cover assembly |
RM1-2036-000CN |
Top cover assembly - Rear Fuser Assembly (face-down) cover with curved ribbed pieces on the bottom |
RM1-2043-000CN |
Paper pickup assembly - Large black plastic structure with the D shaped pickup roller, feed roller, sensor flags, pickup solenoid, and associated gears - Mounts in the lower rear of the printer |
RM1-2048-000CN |
Separation pad assembly - Includes the holder assembly, separation pad, and spring - The assembly is inserted into the bottom rear of the printer |
RM1-2049-000CN |
Fusing Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation - Mounts in the upper rear of the printer |
RM1-2050-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer |
RM1-2054-000CN |
Right side cover assembly - Includes the right side cover, printer function buttons with springs, and the light pipe assembly - Has cut-outs for the network interface connector (if equipped) and the USB port |
RM1-2055-000CN |
Paper output tray extender - Mounts to the top of the front cover assembly |
RM1-2062-000CN |
Transfer roller assembly - Steel shaft with black spongy roller and drive gear - Mounts on top of the paper pickup assembly |
RM1-2075-030CN |
Fuser Assembly - Bonds toner to paper with heat - For 100V to 127VAC operation |
RM1-2076-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC operation |
RM1-2076-030CN |
Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC operation |
RM1-2079-000CN |
Paper input tray assembly - Includes the tray base and pull-out paper support extension (Dust cover NOT Included) |
RM1-2080-000CN |
Unknown Keyword for HP LaserJet 1020 Printer, LaserJet 1020 Series |
RM1-2081-000CN |
Right cover assy |
RM1-2084-000CN |
Laser/scanner assembly - Does NOT include the laser shutter arm |
RM1-2086-000CN |
Fusing assembly (For 110V to 127VAC (+/- 10%) operation) - Bonds the toner to the paper with heat - Mounts in the upper rear of the printer |
RM1-2087-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer |
RM1-2091-000CN |
Paper pickup assembly - Includes the pickup roller, feed roller assembly, drive gears, plastic housing and other associated parts - Does NOT include the separation pad assembly |
RM1-2091-020CN |
Paper pickup assembly - Includes the pickup roller, feed roller assembly, drive gears, plastic housing and other associated parts - Does NOT include the separation pad assembly |
RM1-2093-000CN |
Transfer roller assembly - Transfers static charge to the media being printed on |
RM1-2096-000CN |
Fusing assembly - Bonds toner to paper with heat - For 220V to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer |
RM1-2096-020CN |
Fixing Assy 220 240v |
RM1-2097-000CN |
Fixing Film Assy |
RM1-2309-000CN |
Engine Control Unit (ECU) PC board - Provides timing and control of the printer motor and functions - Mounts on the front support shelf of the printer frame assembly (just above the laser/scanner assembly) |
RM1-2310-000CN |
Power supply assembly - Large PC board which includes the AC power receptacle and power switch - For 110VAC to 127VAC (+/- 10%) operation - Mounts on the left side of the printer |
RM1-2311-000CN |
Power supply assembly - Large PC board which includes the AC power receptacle and power switch - For 220VAC to 240VAC (+/- 10%) operation - Mounts on the left side of the printer |
RM1-2314-000CN |
Print engine control board - Provides timing and control of the printer motors and functions |
RM1-2315-000CN |
Power supply board assembly - Includes the input power cord connector and power swith - For 110V to 127VAC (+/- 10%) operation |
RM1-2316-000CN |
Power supply board assembly - Includes the input power cord connector and power swith - For 220V to 240VAC (+/- 10%) operation |
RM1-2330-000CN |
Front cover assy (c ) us only |
RM1-2331-000CN |
Rear cover assy (c ) us only |
RM1-2332-000CN |
Cassette cover assy (c ) us only |
RM1-2334-000CN |
Control panel (c ) us only |
RM1-2337-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC operation |
RM1-2339-000CN |
Registration roller assembly - Includes the frame, the two roller assemblies, and the upper transfer guide - Mounts in the front middle of the print engine assembly |
RM1-2340-000CN |
Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer |
RM1-2458-000CN |
CARTRIDGE DOOR ASSY Toner cartridge door - Fold down door used when accessing the toner cartridge - Front top and front of printer cover |
RM1-2458-020CN |
Toner cartridge door - Fold down door used when accessing the toner cartridge - Front top and front of printer cover |
RM1-2458-040CN |
Toner cartridge door - Fold down door used when accessing the toner cartridge - Front top and front of printer cover |
RM1-2460-020CN |
Paper pick-up roller gear asembly |
RM1-2461-000CN |
Paper pick up shaft assy |
RM1-2462-000CN |
Mp pad assembly Separation pad for multipurpose tray/tray 1 assembly |
RM1-2463-000CN |
Mp cover assy for HP LaserJet 5200 series |
RM1-2463-020CN |
Front cover of printer - Also drop down MP/Tray 1 paper input tray |
RM1-2465-000CN |
Multi-purpose/Tray 1 paper input assembly |
RM1-2468-000CN |
Top cover assembly |
RM1-2470-000CN |
Top front cover of printer - Toner cartridge access cover |
RM1-2471-000CN |
Top cover assembly - Has face-down paper output tray molded into it - Includes control panel buttons |
RM1-2474-000CN |
Gear assembly - Paper pickup roller gear assembly |
RM1-2479-000CN |
Tray Assembly : 250-sheet paper cassette - For Tray 2 assembly |
RM1-2479-060CN |
Tray Assembly : 250-sheet paper cassette - For Tray 2 assembly |
RM1-2482-000CN |
Paper feed guide assembly - Support structure to guide the paper into the Fuser Assembly - Ribbed plastic frame with metal guide plate |
RM1-2482-020CN |
Paper feed guide assembly - Support structure that to guides the paper into the fusing assembly - Ribbed plastic frame with metal guide plate |
RM1-2483-000CN |
High voltage assembly |
RM1-2485-000CN |
Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
RM1-2485-020CN |
Transfer roller - Transfer charge roller (Black) |
RM1-2490-000CN |
Face down top output bin delivery roller assembly - Includes all rollers and holders in assembly. |
RM1-2490-010CN |
Face down top output bin delivery roller assembly - Includes all rollers and holders in assembly |
RM1-2490-090CN |
Assy-Face Down Paper Delivery |
RM1-2492-000CN |
Face-up output (delivery) tray assembly - Includes drop down paper output tray with the flip-out extender = |
RM1-2498-000CN |
Roller assembly |
RM1-2502-000CN |
Dc controller for HP LaserJet 5200 series |
RM1-2506-000CN |
Registration assy |
RM1-2506-050CN |
Registration assembly - Set of rollers before toner cartridge and after feed rollers |
RM1-2514-000CN |
Tag holder assy |
RM1-2514-020CN |
Tg holder assy for HP Q7543A |
RM1-2516-000CN |
Main motor - Drives gears in main drive assembly (motor unit). |
RM1-2522-000CN |
Fuser Assembly - For 110 VAC to 120 VAC operation - Bonds the toner to the paper with heat |
RM1-2522-040CN |
LaserJet 5200 series Fuser Assembly - Bonds the toner to the paper with heat - For 110VAC to 120VAC operation |
RM1-2522-070CN |
Fusing assembly - For 110 VAC to 120 VAC operation - Bonds the toner to the paper with heat |
RM1-2524-000CN |
FUSER 220V Fuser Assembly - For 220 VAC operation - Bonds toner to paper with heat |
RM1-2524-040CN |
LaserJet 5200 series Fuser Assembly - Bonds the toner to the paper with heat - For 220VAC to 240VAC operation |
RM1-2524-070CN |
Fuser Assembly - For 220 VAC operation - Bonds toner to paper with heat |
RM1-2524-080CN |
Fuser assembly - For 220 VAC - Bonds toner to paper with heat |
RM1-2524BULK48 |
Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
RM1-2530-000CN |
Paper pickup assembly for 250 sheet Tray 2 paper cassette - Includes the base structure with the paper pickup roller, paper feed roller, drive gears, and paper sensors. |
RM1-2530-090CN |
Cassette Paper P/U Assy |
RM1-2538-000CN |
Fusing assembly drive motor |
RM1-2546-000CN |
Separation pad assembly - For Tray 2 - Includes pad holder and separation pad |
RM1-2555-000CN |
Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly RM1-2557 |
RM1-2555-020CN |
Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly RM1-2557 |
RM1-2566-000CN |
Engine control unit (ECU) PC board assembly - Includes the PC board, bottom pan, and standoffs (For 110V to 127V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer |
RM1-2567-000CN |
Engine control unit (ECU) PC board assembly - Includes the PC board, bottom pan, and standoffs (For 220V to 240V operation) - Does NOT includes the power cord connector or power switch - Mounts in the bottom of the printer |
RM1-2571-000CN |
Speaker assembly |
RM1-2643-040CN |
Front cover assembly - Has cutouts for the toner cartridge door release button, and paper input tray assembly |
RM1-2645-000CN |
Interlock switch assembly - Disables the printer when the left side cover is removed - Mounts in the upper front corner of the left side plate assembly |
RM1-2652-000CN |
Power supply pcb 110v |
RM1-2653-000CN |
Power supply pcb 220v |
RM1-2657-000CN |
Paper feeder driver PCA - Located on right side of 500-sheet paper feeder assembly |
RM1-2659-000CN |
Cable (tray 3) for HP LaserJet 5200 series |
RM1-2660-000CN |
Cable paper feed sensor |
RM1-2661-000CN |
Cable feed switch |
RM1-2865-000CN |
Dplx controller pcb assy |
RM1-2865-040CN |
Duplexing controller pcb |
RM1-2883-000CN |
Duplexing drive assy |
RM1-2884-000CN |
Upper guide assembly |
RM1-2891-000CN |
Duplexer feed drive assembly - Gear and motor assembly located on right side under the plastic cover of the mechanical section |
RM1-2896-000CN |
Pickup Assembly : Paper pickup assembly - 500 sheet feeder paper pickup assembly |
RM1-2897-000CN |
Sensor assembly - Located on top right rear side of 500 sheet feeder paper pickup assembly. |
RM1-2899-000CN |
500 sheet feeder right side cover |
RM1-2900-000CN |
500-sheet paper cassette tray 3 |
RM1-2900-060CN |
500-sheet paper cassette tray 3 |
RM1-2909-000CN |
Feed drive assembly - Six gears mounted on a plate on right side of 500 sheet paper feeder assembly |
RM1-2912-000CN |
Lifter drive assembly for 500 sheet feeder |