| Part |
Picture |
Description |
| RM1-3742-000CN |
Face down full detect flag assembly - Goes on the right side of the top cover assembly |
| RM1-3743-000CN |
Face down flag assembly - Goes on the top cover assembly |
| RM1-3746-000CN |
Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer |
| RM1-3748-000CN |
Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability. |
| RM1-3749-000CN |
Face-down output roller assembly - Black roller shaft with four soft rollers. |
| RM1-3757-000CN |
Lower transfer guide assembly - Guides paper into transfer roller. |
| RM1-3758-000CN |
High voltage power supply PC board assembly. |
| RM1-3759-000CN |
Lower paper feed assembly - Vertical transfer unit - Transfers paper from pickup assembly up to the printer input. |
| RM1-3760-000CN |
Paper feed guide assembly |
| RM1-3761-000cn |
Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear |
| RM1-3761-020CN |
Assembly-Fuser 220v |
| RM1-3762-000CN |
Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3 |
| RM1-3763-000CN |
Pick up roller assembly -Tray 2/3 - LaserJet P3005 P3015 |
| RM1-3769-000CN |
Sensor flag assembly for tray 2 - Short rod with one flag on it - Mounts next to the pickup roller assembly |
| RM1-3772-000CN |
Top cover assembly - Mounts below the ADF and holds the paper when it¦s printed |
| RM1-3772-030CN |
Top cover assembly - Mounts below the ADF and holds the paper when it´s printed |
| RM1-3773-000CN |
Left cover assembly - Protects the left side of the printer |
| RM1-3774-000CN |
Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 110 VAC to 127 VAC |
| RM1-3774-020CN |
Engine controller assembly - For 110 VAC to 127 VAC - Engine controller PC board and metal pan - Provides all power supply and motor control functions |
| RM1-3774-030CN |
Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 110 VAC to 127 VAC |
| RM1-3775-000CN |
Engine controller assy |
| RM1-3775-020CN |
Engine controller assembly - 220-240VAC - Engine controller PC board and metal pan - Provides all power supply and motor control functions |
| RM1-3775-030CN |
Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 220 VAC to 240 VAC operation |
| RM1-3776-000CN |
Right front cover - Vertical plastic cover - Mounts on the right side of the printerRight front cover - Vertical plastic cover - Mounts on the right side of the printer Replaced: RL1-1723-000CN |
| RM1-3790-000CN |
Stapler cartidge cover - Located on the right side of the printer. |
| RM1-3796-000CN |
500-sheet input tray - Paper cassette for tray 3. (RM1-3732-000CN is tray# 2) |
| RM1-3799-000CN |
Paper sensor assembly - Paper present sensing |
| RM1-3815-000CN |
500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
| RM1-3815-060CN |
500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
| RM1-3815-080CN |
500-sheet paper input feeder/tray assembly high capacity input (HIC) - Complete cassette assembly |
| RM1-3819-000CN |
Lifter drive assembly - Provides lift support for high capacity input paper tray |
| RM1-3821-000CN |
Paper pick-up assembly - For the 500-sheet paper hight capacity input (HIC) tray |
| RM1-3821-010CN |
Paper Pick-Up Assy |
| RM1-3824-000CN |
Right door assembly - For the 3x500 high capacity input (HCI) main body |
| RM1-3825-000CN |
Right door assembly - Located on the 500-sheet high capacity input (HIC) assembly |
| RM1-3828-040CN |
Stapler/stacker printed circuit board (PCA) assembly |
| RM1-3941-000CN |
Power supply assembly - For 110-127 VAC - Includes the power supply board with integrated power switch and power cord receptacle |
| RM1-3942-000CN |
Power supply assembly - For 220-240 VAC - Includes the power supply board with integrated power switch and power cord receptacle |
| RM1-3943-000CN |
Print engine control board - Provides motor drive, paper motion monitoring and printing control - Mounts next to the laser/scanner assembly |
| RM1-3952-000CN |
Fuser assembly - For LaserJet M1005 series - 110 VAC |
| RM1-3953-000CN |
Left scanner link assembly - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridge access |
| RM1-3954-000CN |
Right scanner link assembly - Connects between the top of the printer and the bottom of the scanner - Allows for limited tilting of the scanner assembly for toner cartridge access |
| RM1-3955-000CN |
Fuser (fixing assy) 220v |
| RM1-3955-020CN |
Fuser assembly - 220 VAC - For LaserJet M1005 series |
| RM1-3956-000CN |
Laser/scanner assembly - Does NOT include the laser shutter arm |
| RM1-3977-000CN |
Front cover assembly - For the LaserJet P1006/P1008 printer series |
| RM1-3978-000CN |
Front cover assembly - For the LaserJet P1005 printer series |
| RM1-3979-000CN |
Paper pickup (output) tray assembly - For the LaserJet P1006/P1008 printer series |
| RM1-3980-000CN |
Paper pickup (output) tray assembly - For the LaserJet P1005 printer series |
| RM1-3981-000CN |
Paper delivery tray assembly - For the LaserJet P1006/P1007/P1008 printer series |
| RM1-3982-000CN |
Paper delivery tray assembly - For the LaserJet P1005 printer series |
| RM1-3983-000CN |
Face down cover assembly - For the LaserJet P1006/P1008 printer series |
| RM1-3984-000CN |
Face down cover assembly - For the LaserJet P1005 printer series |
| RM1-3985-000CN |
Left side cover assembly - For the LaserJet P1006/P1007/P1008 printer series |
| RM1-3986-000CN |
Left side cover assembly - For the LaserJet P1005 printer series |
| RM1-3987-000CN |
Right side cover assembly - For the LaserJet P1006/P1008 printer series |
| RM1-3988-000CN |
Right side cover assembly - For the LaserJet P1005 printer series |
| RM1-4001-000CN |
Frame assembly - Frame that holds all components for the pick-up transfer assembly |
| RM1-4006-000CN |
SEPARATION PAD RM1-4006 fits for HP 1007 1008 P1005 P1006 P1108 P1106 1102 1132 and similar models. |
| RM1-4007-000CN |
Fusing Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4007-020CN |
Fusing Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4008-000CN |
Fusing Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
| RM1-4008-020CN |
Fusing Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
| RM1-4019-000CN |
Paper pickup (output) tray assembly - For the LaserJet P1007 printer series |
| RM1-4023-000CN |
Transfer roller assembly - Long metal shaft with black roller |
| RM1-4030-000CN |
Laser/scanner assembly - For the LaserJet P1000 printer series |
| RM1-4040-000CN |
Top sensor printed circuit board (PCB) assembly (PS-901) - Top of page sensor, detects pick, delivery and stationary |
| RM1-4041-000CN |
Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3) |
| RM1-4042-000CN |
Paper width sensor - Printed circuit board (PCB) assembly. |
| RM1-4053-000CN |
Laser scanner motor cable - Connects ECU to scanner motor (M3). |
| RM1-4054-000CN |
Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control. |
| RM1-4057-000CN |
Cable harness - For paper delivery sensor and fuser thermistors. |
| RM1-4060-000CN |
Cable assembly - For tray 2 paper pickup sensor |
| RM1-4062-000CN |
Option input tray cable |
| RM1-4065-000CN |
Printed circuit board (PCB) sensor assembly |
| RM1-4077-000CN |
Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 220 VAC to 240 VAC operation |
| RM1-4098-000CN |
Dc controller assembly |
| RM1-4098-060CN |
DC Controller Assy DC Controller Assy |
| RM1-4169-000CN |
Pwr inlet assy for HP CB366A |
| RM1-4184-000CN |
Laser/scanner assembly - For the LaserJet P1500 printer series |
| RM1-4191-000CN |
Paper pickup tray assembly - For the LaserJet P1500 printer series |
| RM1-4192-000CN |
Paper delivery tray assembly - For the LaserJet P1500 printer series |
| RM1-4193-000CN |
Face down cover assembly - For the LaserJet P1500 printer series |
| RM1-4194-000CN |
Cartridge access door assembly - For the LaserJet P1500 printer series |
| RM1-4195-000CN |
Control panel assembly - For the LaserJet P1500 printer series |
| RM1-4196-000CN |
Motor/Gear for LaserJet M1522n MFP Series |
| RM1-4207-000 |
Separation Pad Assembly |
| RM1-4207-000CN |
Separation pad assembly - Located on the paper pick-up assembly |
| RM1-4208-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4209-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
| RM1-4216-000CN |
Formatter (Main logic) board - For the LaserJet P1505 printer (base model only) |
| RM1-4224-000CN |
Paper pickup assembly - Includes the transfer roller assembly, separation pad, and pickup roller |
| RM1-4227-000CN |
Separation pad assembly - Located on the paper pick-up assembly |
| RM1-4228-020CN |
Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4234-000CN |
Transfer roller assembly - Long metal shaft with black roller |
| RM1-4244-000CN |
Registration assembly - Set of rollers before toner cartridge and after feed rollers |
| RM1-4245-000CN |
Paper width sensor assembly |
| RM1-4247-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4247-020CN |
Fuser Assembly - Bonds toner to paper with heat - For 110-127VAC (+/- 10%) operation |
| RM1-4248-000CN |
Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
| RM1-4248-020CN |
Fuser Assembly - Bonds toner to paper with heat - For 220-240VAC (+/- 10%) operation |
| RM1-4251-000CN |
250-sheet paper input tray 2 cassette - Pull out cassette that paper is loaded into |
| RM1-4252-000CN |
Tray 2 c cover assy |
| RM1-4253-000CN |
Main drive assembly |
| RM1-4255-000CN |
Duplexing drive assembly - Includes normal rotation drive assembly and reverse rotation drive assembly |
| RM1-4256-000CN |
Normal rotation gear assembly - Includes the internal/external geared body, two planetary gears, outer gear with shaft, and the black ratchet gear |
| RM1-4257-000CN |
Reverse rotation gear assembly - Includes the internal/external geared body, two planetary gears, outter gear with shaft, and the white ratchet gear |
| RM1-4258-000CN |
Duplexer assembly - Enables double-sided printing by flipping the page over in the printing process |
| RM1-4262-000CN |
Laser/Scanner assembly - Mounts on top of print structure |
| RM1-4263-000CN |
Paper feed guide assembly |
| RM1-4265-000CN |
Paper retainer assembly - Bracket assembly with two flapper levers - Keeps paper in the top output bin from sliding back into the printer |
