Part |
Picture |
Description |
RS5-9099-000CN |
Stepped screw - Larger shoulder screw used to fasten the left side cover to the frame of the 2,000-sheet paper feeder assembly (two used) |
RS6-0351-000CN |
Paper feed gear |
RS6-0352-000CN |
Paper feed gear |
RS6-0357-000CN |
Delivery roller shaft gear |
RS6-0440-000CN |
Gear - 10 tooth - Mechanical connection between right and left side paper plates |
RS6-0441-000CN |
Upper delivery roller drive gear - 15 tooth |
RS6-0442-000CN |
Upper delivery roller drive gear - 14 tooth |
RS6-0443-000CN |
Delivery roller gear - 15 tooth |
RS6-0445-000CN |
Registration roller drive gear - 14 tooth |
RS6-0446-000CN |
Gear #5 - 201 tooth gear |
RS6-0447-000CN |
Cluster gear #4 - 58/92 tooth |
RS6-0448-000CN |
Cluster gear #11 - 17/68 tooth |
RS6-0449-000CN |
Cluster gear #10 - 25/41 tooth |
RS6-0450-000CN |
Printer drive gear #9 - 31 tooth |
RS6-0451-000CN |
Printer drive gear #8 - 26 tooth |
RS6-0452-000CN |
Cluster gear - 22/93 tooth |
RS6-0453-000CN |
Cluster gear #2 - 23/46 tooth |
RS6-0454-000CN |
Gear - 48 tooth |
RS6-0455-000CN |
Printer drive gear #1 - 67 tooth |
RS6-0456-000CN |
Cluster gear #6 - 22/86 tooth |
RS6-0457-000CN |
Printer drive gear #7 - 53 tooth |
RS6-0458-000CN |
Pressure roller gear - 26 tooth |
RS6-0459-000CN |
Transfer roller drive gear - 17 tooth |
RS6-0462-000CN |
Gear - 14 tooth |
RS6-0463-000CN |
Gear - 13 tooth |
RS6-0464-000CN |
Feed belt drive gear - 20 tooth |
RS6-0495-000CN |
Paper feeder drive assembly Clutch, gear, and 27 tooth gear. |
RS6-0497-000CN |
Cluster gear - 39/34 tooth |
RS6-0498-000CN |
Gear - 45 tooth |
RS6-0499-000CN |
Gear - 39 tooth |
RS6-0500-000CN |
Gear - 17 tooth |
RS6-0501-000CN |
Drive gear - 15 tooth |
RS6-0921-000CN |
14 Tooth Gear - Drives delivery roller - Attaches to lower delivery guide |
RS6-0923-000CN |
27 Tooth Gear - Attaches to end of pressure roller |
RS6-2020-000CN |
Plate spring - Provides pressure for paper lifting plate |
RS6-2021-000CN |
Pad spring - Provides tension for separation pad on front of paper tray |
RS6-2022-000CN |
Compression spring - Provides tension for right side of transfer roller bushing |
RS6-2023-000CN |
Comprssion spring - Provides tension for the lower face-down delivery roller assembly |
RS6-2024-000CN |
Compression spring - Provides pressure for the separation pad for the multipurpose tray (tray 1) |
RS6-2025-000CN |
Tensioning spring |
RS6-2027-020CN |
Compression spring - Drum drive clutch spring |
RS6-2029-000CN |
Compression spring - Between fusing roller and pressure plate above fusing roller |
RS6-2030-000CN |
Tension spring for HP Color LaserJet 1500 Series |
RS6-2031-000CN |
Compression spring - Drum drive clutch spring |
RS6-2033-000CN |
Roller spring - Provides pressure for guide roller |
RS6-2034-000CN |
Torsion spring - Provides tension for gear holder assembly |
RS6-2035-000CN |
Plate spring - Provides tension for left side width plate |
RS6-2061-000CN |
Clip spring - Provides tension for clip |
RS6-2062-000CN |
Swing gear spring - Provides tension for swing gear assembly |
RS6-2063-000CN |
Roller spring - Provides pressure for feed roller |
RS6-2064-000CN |
Bushing spring - Provides tension for right side feed roller support bushing |
RS6-2072-000CN |
Compression spring - Holds tension on front support block |
RS6-2073-000CN |
Compression spring - Holds tension on rear support block |
RS6-2122-000CN |
Compression spring - Provides tension for paper kick plate |
RS6-2276-000CN |
Torsion spring - Provides tension for paper deflector |
RS6-2285-000CN |
Tension spring for HP LaserJet M9040 MFP |
RS6-2296-000CN |
Laser shutter spring - Provides tension for laser shutter |
RS6-2298-020CN |
Tension spring for HP LaserJet M9040 MFP |
RS6-2299-000CN |
Shutter arm spring - Provides tension for shutter arm |
RS6-2301-000CN |
Compression spring - provides tension for right cover latch |
RS6-2302-000CN |
Compression spring - Provides tension for ON/OFF switch |
RS6-2375-000CN |
Compression spring - Provides pressure for top output bin delivery roller assembly |
RS6-2492-000CN |
Compression spring - Provides upward pressure on the two delvery roller pairs on left end of the scanner assembly (two used) |
RS6-2492-020CN |
Compression spring - Provides upward pressure on the two delvery roller pairs on left end of the scanner assembly (two used) |
RS6-2496-000CN |
Tension spring - Attaches between the delivery motor mount and the ADF paper pickup assembly rear frame - Provides tension for ADF delivery motor belt |
RS6-2498-000CN |
Tension spring - Attaches between the weight solenoid assembly arm and the rear frame of the ADF paper pickup assembly - Provides tension for lifting the weight assembly |
RS6-2499-000CN |
Spring tension for HP LaserJet M9059 Series |
RS6-2503-000CN |
Tension spring - Keeps the ADF main assembly latched in the operating position on the paper pickup assembly - One mounts on each release latch on the ADF main assembly (two used) |
RS6-2572-000CN |
ADF compression spring - Provides pressure for ADF separation pad |
RS971AA |
HP USB 2.0 Interface Cable - Type A connector to type B connector - 1.83m (6.0ft) long |
RU5-0015-000CN |
14T/30T cluster gear |
RU5-0040-000CN |
Gear - 23 tooth gear in lower front section of pickup drive assembly |
RU5-0045-020CN |
18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly |
RU5-0045-030CN |
18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part. |
RU5-0050-000CN |
30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
RU5-0083-000CN |
16-tooth gear |
RU5-0085-000CN |
Gear, 18t (tray 3) |
RU5-0086-000CN |
Gear, 32t (tray 3) |
RU5-0087-000CN |
Gear, 14t (tray 3) |
RU5-0088-000CN |
18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly |
RU5-0155-000CN |
Drive gear - Provides power transmission to gear assembly that drives paper feed shaft - 27 tooth |
RU5-0156-000CN |
Paper feed shaft drive gear - Between paper feed roller and paper feed shaft |
RU5-0158-000CN |
Paper feed drive shaft - Connects main drive to paper feed drive assembly |
RU5-0166-000CN |
12 tooth gear - On left side of feed roller |
RU5-0167-000CN |
16 Tooth Gear - Attaches to right end of delivery roller |
RU5-0168-000CN |
Drive gear - Upper Delivery Roller drive gear - 15 Tooth |
RU5-0253-000CN |
Gear - 15 tooth gear located in right rear corner of 500 sheet paper cassette |
RU5-0254-000CN |
Gear - 14 tooth gear located in right rear corner of 500 sheet paper cassette |
RU5-0256-000CN |
23 tooth gear - Located on right side under paper pickup drive assembly |
RU5-0277-000CN |
Gear for swing plate Assembly HP laserJet 4200 4300 Series 41T gear. |
RU5-0331-000CN |
29-tooth gear (White plastic) - Main drive gear for the Fuser Assembly - Mounts on the right end of the Fuser Assembly |
RU5-0332-000CN |
19-tooth gear (White plastic) |
RU5-0366-000CN |
Gear - 30 tooth - Attaches to right side end of Tray 1 pickup roller shaft |
RU5-0375-000CN |
Roller gear - White plastic 15 tooth gear that attaches to end of face-down paper output roller. |
RU5-0377-000CN |
21 tooth gear - 21 tooth gear in fuser drive assembly on right rear of printer |
RU5-0378-000CN |
20 tooth gear - 20 tooth gear in fuser drive assembly on right rear of printer |
RU5-0379-000CN |
19 tooth gear - 19 tooth gear in fuser drive assembly on right rear of printer |
RU5-0389-000CN |
Gear - Large white plastic 201 tooth gear on right side of printer |
RU5-0394-000CN |
Gear - 12-tooth Gear - Goes on the drive release assembly |
RU5-0400-000CN |
12 tooth gear - On left side of registration roller assembly |
RU5-0409-000CN |
Registration roller gear - Mounts on the end of the registration roller - 14-tooth gear |
RU5-0536-000CN |
Drive gear - 13 tooth gear that attaches to left side of transfer roller |
RU5-0537-000CN |
25-tooth gear for HP LaserJet Mxxxx mfp |
RU5-0538-000CN |
35-tooth gear for HP LaserJet Mxxxx mfp |
RU5-0539-000CN |
33-tooth gear for HP LaserJet Mxxxx mfp |
RU5-0546-000CN |
Gear - 133-tooth gear - Big gear that is located on the gear plate |
RU5-0546-020CN |
133-tooth gear - Big gear that is located on the gear plate |
RU5-0547-000CN |
Gear - 73-tooth gear - Located on the gear plate |
RU5-0548-000CN |
Gear - 52/96 tooth gear - Have 52-tooth on the inside and 96-tooth on the outside - Located on the gear plate |
RU5-0549-000CN |
Gear - 40/99 tooth gear - Have 40-tooth on the inside and 99-tooth on the outside - Located on the gear plate |
RU5-0550-000CN |
Gear - 43-tooth - Located on the gear plate |