Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar

Printer parts diagram for: RB3-1026-000CN

 

RB3-1026-000CN is represented by #1 in the diagram below.

RB3-1026-000CN is represented by #1 in the diagram below.
RG5-7155-000CN Cable Fusing assembly cable (for 220VAC to 240VAC operation)
RG5-7163-000CN Roller Fusing film assembly (for 220VAC to 240VAC operation) - Includes the heater assembly and the fusing film tube
1
RB3-1026-000CN Bushing Bushing - Plastic 'U' shaped bushing
10
RF5-4060-000CN Plate Base plate - Bottom support plate for the fusing assembly
11
RB3-1025-000CN Spring Compression spring
12
RS7-0580-000CN Gear 30 tooth gear for HP Color LaserJet 2820 Series
14
RG5-7162-000CN Roller Fusing film assembly (for 110VAC to 127VAC operation) - Includes the heater assembly and the fusing film tube
15
RB2-9950-000CN Roller Pinch-roller - Small roller mounted on a shaft
16
RG5-7576-000CN Guide Separation upper guide assembly - Ribbed plastic channel with pivot pins on each end and two pinch rollers for the paper delivery roller
17
RB3-1166-000CN Lever Right pressure release lever - To release pressure between the pressure roller and the heater assembly to clear paper jams
18
RB3-1140-000CN Cover Rear cover / face-up output tray (ONLY) - When opened, routes printed pages to this cover/tray for face-up output
19
RG5-7604-000CN Cover Rear cover / face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output
2
RB3-1027-000CN Bushing Bushing - Flanged plastic bushing
20
RG5-7577-030CN Guide Lower guide assembly - Includes the support structure, delivery roller, drive gear, paper photo-sensor, sensor flags, and upper separation guide - Mounts on the rear of the fuser support frame assembly
21
RB3-1167-000CN Lever Left pressure release lever - To release pressure between the pressure roller and the heater assembly to clear paper jams
22
RB3-1150-000CN Spring Grounding spring
23
RB3-1029-000CN Holder Gear holder - Hollow tube with locking tab
24
RB3-1032-000CN Cover Fusing assembly upper cover - Ribbed cover with end caps
26
RG5-7154-000CN Cable Fusing assembly cable (for 110VAC to 127VAC operation)
27
RS7-0582-000CN Gear 28 tooth idler gear
29
RB2-9934-000CN Spacer Right spacer - Shipping lock for the fusing assembly
30
RB2-9935-000CN Spacer Left spacer - Shipping lock for the fusing assembly
31
RG5-7602-070CN Fuser Assembly FIXING ASSY 110-127V Fuser Assembly - Includes the fusing mechanism, lower rear cover (with the two locking levers), and the rear cover/face-up output tray - Bonds the toner to the paper with heat - For 110V to 127VAC operation
5
RB3-0180-000CN Guide Paper inlet guide - Small ribbed plastic piece
6
RB3-1024-000CN Plate Pressure plate - Small steel channel shaped plate
7
RU5-8125-000CN Label Caution: High temperature label
8
RB3-1034-000CN Roller Pressure roller assembly - Hard rubber roller on a metal drive shaft
bottom bar