| Part |
Picture |
Description |
| 0380-3073 |
SAPCER SPRING |
| 0410-2286 |
XTAL 40.0 MHZ FOR HP DESIGNJET T770 24-IN |
| 0460-2536 |
EDGE WIRE SADDLE FOR Y-AXIS BRACKET |
| 0510-0083 |
RETAINING E-RING - 0.250-IN DIAMETER, STEEL ZINC-DICHROMATE DIP |
| 0515-2200 |
UNKNOWN KEYWORD FOR DESKJET 6620 SERIES |
| 0515-2565 |
EDC SCREW |
| 0515-2961 |
SCREW-METAL TAPPING |
| 0515-3030 |
SCR-M3X0.5X6MM |
| 0515-4576 |
SCREW-MACH M3 X 0.5 6.9MM-LG PAN-HD |
| 0515-4659 |
MACHINE SCREWS M3.0X.05 7MM LONG (PAN HEAD) |
| 0570-1316 |
MACHINE SCREW/STANDOFF (TEXTRON R86-20000-382) - 4-40 THREAD, 9.4MM LONG, HEX HEAD - STEEL |
| 0591-0090 |
PLASTITE SCREW (THREADED INSERT MOLD-IN, TEXTRON K40) - M4.0 X 0.7, 20MM LONG, TORX T15 |
| 0601310-012 |
SCREW PPH SEMS M4 0.7 PITCH ST |
| 0602429-002 |
CBL CM P ETHERNET CAT6 3FT |
| 0624-0769 |
SCREW-TPG 6-19 .5-IN-LG SCREW-TPG 6-19 .5-IN-LG PAN-HD TRX T15 |
| 0624-0771 |
PLASTITE SCREW (THREADED INSERT MOLD-IN, TEXTRON K40) - M4.0 X 0.7, 20MM LONG, TORX T15 |
| 0624-0795 |
SCREW FILTER |
| 07550-40104 |
TENSIONING WEDGE (CAM TENSIONER) - FOR THE PEN CARRIAGE DRIVE BELT PULLEY |
| 07570-40105 |
MAIN TENSIONING WEDGE - FOR THE CARRIAGE DRIVE BELT IDLER PULLEY |
| 07570-60105 |
IDLER PULLEY - FOR MAIN DRIVE BELT |
| 07570-60112 |
IDLER DRIVE PULLEY - APPLIES TENSION TO THE PEN CARRIAGE DRIVE BELT (SMALL BELT) |
| 07575-40012 |
MALE HALF OF HINGE (ON WINDOW) - FOR LIFT-UP WINDOW |
| 07575-40013 |
LEFT BELT CLAMP - ATTACHES CARRIAGE BELT TO CARRIAGE |
| 07575-40014 |
RIGHT BELT CLAMP - ATTACHES CARRIAGE BELT TO CARRIAGE |
| 07575-40111 |
FEMALE HALF OF HINGE (ON CHASSIS) - FOR LIFT-UP WINDOW |
| 07575-40125 |
DRIVE-TENSIONER BRACKET FOR PEN CARRIAGE DRIVE BELT TENSIONING WEDGE |
| 07575-80012 |
BAIL GEAR SUPPORT CLAW SPRING - ATTACHED BETWEEN THE BAIL ENGAGING LEVER SUPPORT AND THE BAIL GEAR ASSEMBLY |
| 07595-90001 |
HP-GL REFERENCE GUIDE - PROGRAMMING INFORMATION |
| 0901492 |
THERMISTORS KIT - INCLUDES TWO INK AND ONE AIR TEMPERATURE THERMISTOR (THEY HAVE BEEN CALIBRATED TOGETHER AND SHOULD BE REPLACED TOGETHER) |
| 0950-2372 |
POWER SUPPLY MODULE - 100-240VAC INPUT, 47-63HZ, REQUIRES SEPARATE AC POWER CORD - 5VDC OUTPUT, 1A, 5 WATTS |
| 0950-2417 |
POWER SUPPLY BOARD |
| 0950-2623 |
SWITCHING POWER SUPPLY (DELTA DPS-158ABA) - 100-240VAC INPUT, 47-63HZ - FOUR DC OUTPUTS (5.15V, +12V, -12V, 24V) - 158 WATTS. |
| 0950-3169 |
WALL MOUNT POWER SUPPLY MODULE - 120VAC INPUT 60HZ POWER SUPPLY AC DC 15W UNIVERSAL ADAPTER POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 100-240 VAC - OUTPUT VOLTAGE 12 VDC, 15 WATTS OUTPUT, 1.0A - FOR JET DIRECT POWER AND OTHER ACCESSORIES. |
| 0950-3171 |
POWER SUPPLY MODULE - 220-240VAC INPUT, 47-53HZ - 13VDC OUTPUT, 300MA (U. K. AND HONG KONG) |
| 0950-3172 |
POWER SUPPLY MODULE - 240VAC INPUT, 47-53HZ - 13VDC OUTPUT, 300MA (AUSTRALIA) |
| 0950-3349 |
UNIVERSAL AC POWER ADAPTER - WIDE-RANGE, 40C - REQUIRES SEPARATE COUNTRY-SPECIFIC POWER CORD WITH C7 CONNECTOR POWER SUPPLY MODULE - 120VAC INPUT, 60HZ - 12VDC OUTPUT, 1.0A |
| 0950-3350 |
WALL MOUNT POWER SUPPLY MODULE (LEADER ELECTRONICS 48130625HK) - 200VAC INPUT, 48-52HZ - 13VDC OUTPUT, 625MA (HONG KONG) |
| 0950-3351 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12009) - 220VAC INPUT, 47-63HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (SOUTH KOREA) |
| 0950-3352 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12010) - 100VAC INPUT, 47-63HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (FOR USE IN JAPAN) |
| 0950-3354 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12010) - 220-250VAC INPUT, 47-53HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (SOUTH AFRICA) |
| 0950-3358 |
POWER MODULE (WALL MOUNT, MEI-AH ED12063) - INPUT VOLTAGE 240VAC, 47/53HZ - OUTPUT VOLTAGE 13VDC, 800MA, 10.4 WATTS (FOR USE IN AUSTRALIA AND NEW ZEALAND) |
| 0957-2109 |
POWER SUPPLY MODULE - 209-253VAC INPUT, 47-53HZ - 13VDC OUTPUT, 800MA (EUROPE AND ISRAEL) |
| 0957-2110 |
WALL MOUNT POWER SUPPLY MODULE - 120VAC INPUT 60HZ POWER SUPPLY AC DC 15W UNIVERSAL ADAPTER POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 100-240 VAC - OUTPUT VOLTAGE 12 VDC, 15 WATTS OUTPUT, 1.0A - FOR JET DIRECT POWER AND OTHER ACCESSORIES. |
| 0957-2114 |
POWER MODULE 220-250VAC 50HZ - OUTPUT 800MA 10.4 WATTS - SOUTH AFRICA |
| 0957-2115 |
POWER MODULE - UNITED KINGDOM, HONG KONG |
| 0957-2117 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12009) - 220VAC INPUT, 47-63HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (SOUTH KOREA) |
| 0957-2134 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12010) - 100VAC INPUT, 47-63HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (FOR USE IN JAPAN) |
| 0957-2192 |
POWER SUPPLY MODULE - 209-253VAC INPUT, 47-53HZ - 13VDC OUTPUT, 800MA (EUROPE AND ISRAEL) |
| 0957-2193 |
POWER MODULE - 220VAC INPUT - 13V/300MA VDC OUTPUT |
| 0957-2194 |
WALL MOUNT POWER SUPPLY MODULE (MEI-AH ED12009) - 220VAC INPUT, 47-63HZ - 13VDC OUTPUT, 800MA, 10.4 WATTS (SOUTH KOREA) |
| 0957-2195 |
POWER MODULE - UNITED KINGDOM, HONG KONG |
| 0957-2196 |
POWER MODULE 220-250VAC 50HZ - OUTPUT 800MA 10.4 WATTS - SOUTH AFRICA |
| 0957-2197 |
WALL MOUNT POWER SUPPLY MODULE - 120VAC INPUT 60HZ POWER SUPPLY AC DC 15W UNIVERSAL ADAPTER POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 100-240 VAC - OUTPUT VOLTAGE 12 VDC, 15 WATTS OUTPUT, 1.0A - FOR JET DIRECT POWER AND OTHER ACCESSORIES. |
| 0957-2228 |
WALL MOUNT POWER SUPPLY MODULE - 120VAC INPUT 60HZ POWER SUPPLY AC DC 15W UNIVERSAL ADAPTER POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 100-240 VAC - OUTPUT VOLTAGE 12 VDC, 15 WATTS OUTPUT, 1.0A - FOR JET DIRECT POWER AND OTHER ACCESSORIES. |
| 0957-2229 |
POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 220-250VAC, 47/53HZ - OUTPUT VOLTAGE 13VDC, 800MA, 10.4W (WORLDWIDE) |
| 0957-2262 |
POWER MODULE - INPUT VOLTAGE 100-240VAC, 50/60HZ, 2.5A - OUTPUT VOLTAGE 32VDC, 64 WATTS - REQUIRES A SEPARATE 2-WIRE AC POWER CORD |
| 0957-2340 |
WALL MOUNT POWER SUPPLY MODULE - 120VAC INPUT 60HZ POWER SUPPLY AC DC 15W UNIVERSAL ADAPTER POWER MODULE (WALL MOUNT)- INPUT VOLTAGE 100-240 VAC - OUTPUT VOLTAGE 12 VDC, 15 WATTS OUTPUT, 1.0A - FOR JET DIRECT POWER AND OTHER ACCESSORIES. |
| 0957-2481 |
PWRA BRK UNI 12VDC 15W |
| 0970811 |
CARRIAGE DRIVE MOTOR - FOR SCITEX PRINTERS |
| 13242G |
RS-232C CABLE - 25-PIN (M) TO 25-PIN (M) - 5.0M (16FT) LONG |
| 1400-1021 |
CABLE CLAMP FOR HP DESIGNJET 650C SERIES |
| 1410-0708 |
SLEEVE BEARING - USED ON LEFT END OF OVERDRIVE ASSEMBLY |
| 1460-2061 |
EXTENSION SPRING - ZINC PLATED MUSIC WIRE, 0.875IN LONG, 0.187IN OD, 0.020IN WIRE DIAMETER, 1.8 IN/LB RATE - FOR PEN CARRIAGE DRIVE BELT PULLEY TENSIONING WEDGE |
| 1460-2139 |
COMPRESSION TENSIONER SPRING - STAINLESS STEEL, PASSIVITY FINISH, 41.3MM LONG, 9.14MM OD, 42UM WIRE DIAMETER, 44.5 N/MM RATE - INSTALLED ON SHAFT OF TENSIONING WEDGE FOR CARRIAGE DRIVE BELT IDLER PULLEY |
| 1492-0145 |
LOCKABLE CASTER ASSEMBLY - INCLUDES STEM AND WASHER |
| 1500-0855 |
HP DESIGNJET 600, 650C MOTOR BELT (SMALL BELT).Y AXIS DRIVE BELT. |
| 1500-0856 |
CARRIAGE BELT FOR HP DESIGNJET 36INCH SIZE PLOTTERS. |
| 17072-40007 |
SPINDLE BRAKE - ENGAGES RIGHT END OF ROLLFEED SPINDLE ROD |
| 17255D |
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (F) - 1.2M (3.9FT) LONG |
| 17255M |
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (M) - 1.0M (3.3FT) LONG |
| 17302A |
RS-232C SERIAL CABLE - 25-PIN (M) TO 8-PIN (M) DIN - 1.5M (4.9FT) LONG |
| 17355M |
RS-232C SERIAL CABLE - 25-PIN (M) TO 25-PIN (M) - 3.0M (9.8FT) LONG |
| 1810-1065 |
NETWORK-RES SMD |
| 1818-4792 |
EPROM - ON MAIN LOGIC BOARD |
| 1818-4932M |
EEPROM - ON MAIN LOGIC BOARD |
| 1818-5624 |
4MB, 70NS DRAM SIMM MEMORY MODULE |
| 1818-5637 |
EEPROM (U42) - ON MAIN LOGIC BOARD |
| 1818-5984 |
DRAM 60NS 300-VCC+/-10% |
| 1818-6016 |
ROM - U28 ON MAIN LOGIC BOARD (REVISION B.02.01) |
| 1818-6017 |
ROM - U29 ON MAIN LOGIC BOARD (REVISION B.02.01) |
| 1818-6089 |
ROM - (U31)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
| 1818-6090 |
ROM - (U30)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
| 1818-6091 |
ROM - (U33)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
| 1818-6092 |
ROM - (U32)ON MAIN LOGIC BOARD - REVISION IS 5.11 |
| 1818-6171 |
4MB EDO (EXTENDED DATA OUTPUT) DRAM SIMM MEMORY MODULE |
| 1818-6172 |
8MB EDO (EXTENDED DATA OUTPUT) DRAM SIMM MEMORY MODULE |
| 1818-6521 |
MASKED ROM - U28 ON MAIN LOGIC BOARD (REV A.01.02) - NOTE: REPLACE EPROMS (40-PIN) U4, U9, U28, AND U29 WITH NEW MASKED ROMS (42-PIN) IN U28/U29 SOCKETS AND LEAVE U4/U9 EMPTY |
| 1818-6522 |
MASKED ROM - U29 ON MAIN LOGIC BOARD (REV A.01.02) - NOTE: REPLACE EPROMS (40-PIN) U4, U9, U28, AND U29 WITH NEW MASKED ROMS (42-PIN) IN U28/U29 SOCKETS AND LEAVE U4/U9 EMPTY |
| 1818-8505 |
64MB, 133MHZ, 3.3V, 144-PIN SDRAM SO-DIMM MEMORY MODULE |
| 1820-8409 |
IC-IF: 7213 FOR HP DESIGNJET 820 MFP SERIES |
| 24540-80010 |
CENTRONICS (PARALLEL) CABLE - 36-PIN (M) TO 25-PIN (M) - 2.0M (6.6FT) LONG |
| 24542G |
RS-232C SERIAL CABLE - 25-PIN (M) TO 9-PIN (F) - 3.0M (9.8FT) LONG |
| 305422-001 |
UNIVERSAL CLEANING CARTRIDGE (ORANGE COLOR) - FOR LINEAR TAPE OPEN (LTO) ULTRIUM - NOTE: FOR HP ULTRIUM DRIVES THAT SHIPPED AFTER JANUARY 2002 AND FOR OLDER DRIVES WITH A FIRMWARE UPGRADE |
| 31391A |
RS-232C SERIAL EXTENSION CABLE - 25-PIN (M) TO 25-PIN (F) - 5.0M (16.4FT) LONG |
| 3140-0854 |
STEPPER MOTOR FOR HP DESIGNJET 600 D SIZE |
| 3160-0814 |
TUBEAXIAL FAN (MATSUSHITA FBK-09A12M2-MOD) - 82.5MM (3.25IN) MOUNT HOLE SPACING, 25.5MM (1.0IN) THICK, 12VDC, 35.3CFM |
| 319603-001 |
BATTERY FOR REAL-TIME CLOCK (RTC) - 3.0V, 220MAH, LITHIUM DISC CELL, 20MM DIAMETER, 3.2MM HEIGHT (CR2032) |
| 3C753A |
STAND & BASKET ACCESSORY HP DESIGNJET T100/T200/T500/T600 24" PRINTER STAND T230 T250 3C753A |
| 5011-4613 |
JETDIRECT SOFTWARE CD CREPE |
| 5011-4616 |
SOFTWARE FOR DESKJET 640 SERIES, DESIGNJET 130 SERIES, OFFICEJET PRO K5400 SERIES, DESKJET 800 SERIES |
| 5021-0377 |
MANUAL KIT FOR 5000 C40, LASERJET 6P SERIES, DESIGNJET 450, DESIGNJET 430 |
| 5041-1203 |
POWER SWITCH KEYCAP (WHITE) |
| 5063-0442 |
POWER SUPPLY BOARD - IN PVA |
| 5063-1256 |
IEEE-1284 BI-TRONICS PARALLEL CABLE - DB-25 (M) CONNECTOR (TYPE A) TO 36-PIN CENTRONICS (M) CONNECTOR (TYPE B) - 2.0M (6.6FT) LONG |
| 5063-1257 |
IEEE 1284 BI-TRONICS PARALLEL CABLE - DB-25 (M) CONNECTOR (TYPE A) TO 36-PIN CENTRONICS (M) CONNECTOR (TYPE B) - 3.0M (9.8FT) LONG |
| 5063-2424 |
GAL22V10-1 PGRM |
| 5064-5555 |
ASSY PIGTAIL OHS INKBOX IC FILTER |
| 5069-7161 |
THERMAL INKJET 4.0 INK CARTRIDGE RETURN KIT (10X12 BAG) (UNITED STATES) |
| 5069-7162 |
THERMAL INKJET 4.0 #38 PRINTHEAD RETURN KIT (EUROPE, MIDDLE EAST, AND AFRICA) |
| 507139 |
ORDER CH971-57139 |
| 507251 |
ORDER CH971-91604 |
