A9T80A-AbsorberAbsorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
A9T80A-AC_AdapterAC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
A9T80-60016Accessory - Assy - Mimas-Tdr Service Station
CB780-60032Accessory - REFTIT Officejet 8600 ADF Pre-scan refit adf rollers for scanning documents Pre-pick arm assembly adf roller kit ( for plus or premium order CM750-40107).
A9T80A-ActuatorActuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
A9T80A-Arm_DeliveryArm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
A9T80A-Arm_PickupArm Pick Up - Paper detection arm - for registration plate on picking up paper
A9T80A-Arm_PlateArm Plate - Lever arm - used to lift the pressure plate lifter
A9T80A-Arm_SensingArm Sensing - Arm assembly senses paper in bottom tray
A9T80A-Arm_TensionArm Tension - Tension arm - maintains tension on carriage belt
A9T80A-Belt_CarriageBelt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
A9T80A-Belt_DuplexBelt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
A9T80A-Belt_PaperBelt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
A9T80A-Belt_ScannerBelt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
A9T80-60076Bezel - Bezel - Control Panel - MYKONOS UV COATING
A9T80A-BezelBezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
A9T80A-Carriage_AssyCarriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
A9T80A-Carriage_BaseCarriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
A9T80A-Carriage_BeltCarriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
A9T80A-Carriage_CableCarriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
A9T80A-Carriage_LatchCarriage Latch - A-arm latch - retains latch over the printheads on the carriage
A9T80A-Carriage_Latch_CVRCarriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
A9T80A-Carriage_MotorCarriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
A9T80A-Carriage_OnlyCarriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
A9T80A-Carriage_PC_BRDCarriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
B3B27ACartridge - Hp 61 Ink Subscription Mono Supply
A9T80A-ChassisChassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
A9T80A-Clutch_FeedClutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
A9T80A-Control_PanelControl Panel - Control panel assembly - control buttons and display on top front of the unit.
A9T80A-Cover_BackCover Back - Back cover of printer, it is usually removed to clear paper jams.
A9T80A-Cover_CartridgeCover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
A9T80A-Cover_MainCover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
A9T80A-DeflectorDeflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
A9T80A-DisplayDisplay - Status led display (LCD display assembly).
A9T80A-Door_CarriageDoor Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
A9T80A-Door_CartridgeDoor Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
A9T80A-Door_RearDoor Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
A9T80A-Drive_AssyDrive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
A9T80A-Encoder_DiskEncoder Disk - Disk encoder - helps to provide position information of the paper
A9T80A-Encoder_StripEncoder Strip - Encoder strip - carriage position sensor reference
A9T80A-Extender_InputExtender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
A9T80A-FormatterFormatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
A9T80A-Front_PanelFront Panel - Front panel assembly - includes lcd and actuator buttons
A9T80A-Gear_AssyGear Assembly - ADF gear assembly driven by ADF main motor
A9T80A-Gear_ClusterGear Cluster - Cluster gear, large gear on service station
A9T80A-Gear_DoubleGear Double - Transfer gear - has double gear attached on service station
A9T80A-Gear_MainGear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
A9T80A-Guide_PaperGuide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
A9T80A-HolderHolder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
A9T80A-IdlerIdler - Scanner belt idler assembly - maintains scannter belt tension.
A9T80A-Ink_DLVRYInk Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
A9T80A-Motor_CarriageMotor Carriage - Carriage motor - motor that drives the carriage assembly
A9T80A-Motor_ScannerMotor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
A9T80A-MTR_Srvce_StationMotor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
A9T80-60023Overlay - Overlay - Control Panel - Mykonos
A9T80A-OverlayOverlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
A9T80A-Pad_TrayPad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
A9T80A-PC_BRDPC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
A9T80A-PC_BRD_DCPC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
A9T80A-PC_BRD_InterfacePC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
A9T80-80013Pen - Lbl: Prod Id And Pen Info_Mykonos
A9T80A-PinchwheelPinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
8120-6313Power Cord - Power cord (Black) - 18 AWG two conductor 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 110-120VAC in the United States Canada Mexico Latin America and Taiwan)
8120-8441Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea)
8120-8699Power Cord - Power cord (Black) - 17 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle and EPSR symbol molded into plug (For 220VAC in Hong Kong & UK)
8121-0870Power Cord - Power cord (Black) - Two conductor, 1.8m (6.0 ft) long - Has straight (F) C7 receptacle (For 230-240VAC in Australia and New Zealand)
8121-0963Power Cord - Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle
8121-1788Power Cord - CBL: Power Cord 1.5m UK, HK, Sing, ME
A9T80A-Power_CordPower Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
A9T80A-Power_MDLEPower Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
A9T80A-Power_MDLE_AssyPower Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
A9T80-60008Power Supply - Power supply AC Adapter Charger Power Supply HP Original adapter 32V / 12V - Morganite - Internal WW
A9T80A-Power_SupplyPower Supply - Power supply board (internal pwr supply unit in the office machine).
A9T80A-Print_MchnsmPrint Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
A9T80A-PulleyPulley - Paper pick up tray motor pulley.
A9T80A-Repair_InkJetRepair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
A9T80A-Roller_PickupRoller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
A9T80A-ScannerScanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
A9T80A-Scanner_BeltScanner Belt - Scanner belt attaches from the scanner to the scanner motor.
A9T80A-Scanner_CableScanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
A9T80A-Sensor_OutSensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
A9T80A-Sensor_SpotSensor Spot - Spot sensor assembly is attached to the carriage assembly.
A9T80A-SeparatorSeparator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
A9T80A-GuideService Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
A9T80A-Service_StationService Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
A9T80A-SLED_AssySLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
A9T80A-SliderSlider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
A9T80A-SpeakerSpeaker - Speaker assembly - includes speaker cable.
A9T80A-SpittonSpitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
A9T80A-Spring_CmprsnSpring Compression - Compression spring - on pulley wedge for carriage belt tension
A9T80A-Trailing_CblTrailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
Repair It
Exchange It
View Supplies
Service Manual
