Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts About Partshere Contact Partshere Partshere Support Partshere Order Status Partshere Login
 
top bar
 
Rate this page:
See HP parts for this model:

HP parts available for C1633B HP DesignJet 2000CP

C2858-60115 Bail - Bail assembly - Has star wheel assemblies attached
1500-0855 Belt - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.
1500-0856 Belt - Carriage belt for HP DesignJet 36inch size plotters.
C2847-00051 Bracket - Y-tensioner bracket on left side plate
17072-40007 Brake - Spindle Brake - Engages Right End of Rollfeed Spindle Rod
17255D Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long
24540-80010 Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long
5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C1633-60050 Cable - Carriage assembly trailing cable - 28-pin (F) connector to 28-pin (F) connector attached to mounting hardware - 1.6m (5.3ft) long
C2847-60019 Cable - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long
C2847-60034 Cable - Ribbon cable - Has 12-pin (F) connectors - 1.2m (3.9ft) long
C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2858-40043 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C3172-40006 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.
C1633-60120 Carriage - Carriage assembly - Includes carriage PC board
51626A Cartridge - HP 26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America)
51626AA Cartridge - HP 26A Lge Black InkJet Crtg AP
51626AC Cartridge - HP 26A Lge Black InkJet Crtg Can
51626AL Cartridge - HP 26A Lge Black InkJet Crtg LAR
51642M Cartridge - Cartridge for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 E size
C6611AN Cartridge - Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)
1492-0145 Caster - Lockable caster assembly - Includes stem and washer
C1633-40092 Clip - Starwheel clip for HP DesignJet-C1633A
C2847-60087 Control Panel - Control panel assembly - Includes ribbon cable
C1633-40047 Cover - Right end cover - For end of upper stand (Chassis) assembly
C2847-60062 Cover - Left end cover assembly - For end of upper stand (Chassis)
C2858-60021 Cutter - Cutter mechanism assembly - Auto cutter for rollfeed paper
3160-0814 Fan - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM
51642A Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll
51642B Film - Polyester matte film - 91.4cm (36in) x 36.6m (120ft) roll
51642C Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets
51642F Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642G Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)
51642H Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size
51642J Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets
51642K Film - Polyester matte film - E size (34 x 44-inches) - 40 sheets
51642N Film - Polyester matte film - Architectural E size (36 x 48-inches) - 40 sheets
C1633-40030 Handle - Pinchwheel manual lift handle - Paper loading lever
07575-40012 Hinge - Male half of hinge (on window) - For lift-up window
07575-40111 Hinge - Female half of hinge (on chassis) - For lift-up window
C1633-40094 Holder - Holder - For 'Help' card and hand held cutter
1818-4932M IC ROM - EEPROM - on Main Logic Board
C1633-18008 IC ROM - Low ROM (Revision 2.1) - Note: the 'High' and 'Low' ROMs MUST be the same revision
C1633-18009 IC ROM - High ROM (Revision 2.1) - Note: the 'High' and 'Low' ROMs MUST be the same revision
C2847-60061 Kit - Hardware kit - Package of 6 screws for stand assembly
C3195-00057 Label - Safety label - Provides warning that encoder strip is sharp
C2848-60002 Leg - Leg assembly - Side support with foot bar and two casters
C2858-60209 Lifter - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers
5959-9733 Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650
C1633-90000 Manual - C1633A/B DesignJet plotter service manual
C1633-90041 Manual - C1633B DesignJet plotter users guide
C1633-90044 Manual - C1633B DesignJet plotter users guide (German)
C1633-90048 Manual - C1633B DesignJet plotter users guide (Japanese)
C6072-60281 Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)
C1633-00019 Media Bin - Media bin back - For top of wire rack below plotter
C1633-00020 Media Bin - Media bin front - Main part of wire rack below plotter
C1633-00044 Media Bin - Media bin adjust - Adjustable media bottom stop in wire rack
C2065A Memory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.
D2150-69001 Memory - 1MB, 80nS, 36-bit SIMM memory module
J2382-69003 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2590-69001 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors
J2592-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
J4102-69022 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
3140-0854 Motor - Stepper motor for HP DesignJet 600 D size
C2847-60221 Motor - Motor assembly - Includes power cable
C2848-60003 Motor - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set
C1633-60040 Overlay - Control panel overlay (Japanese)
C1633-60041 Overlay - Control panel overlay (German)
C1633-60042 Overlay - Control panel overlay (French)
C1633-60043 Overlay - Control panel overlay (Italian)
C1633-60044 Overlay - Control panel overlay (Spanish)
C1633-60045 Overlay - Control Panel Overlay (English)
C3196-60113 Packaging - Repackaging Kit - for Main Plotter Unit
C1860A Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll
C3850A Paper - Opaque bond paper - 91.4cm (36in) x 45.7m (150ft) roll
C3851A Paper - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll
C3854A Paper - Opaque bond paper - Architectural E size (36 x 48-inches) - 100 sheets
C3855A Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll
0950-2417 PC Board - Power supply board
C1633-68103M PC Board - (Ink) drop sense board
C1633-68105M PC Board - Interconnect board
C1633-69101 PC Board - Main Logic Board
J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors
J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors
J2594-69001 PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors
J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN
J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors
J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN
J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network
J4102B PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector
C1633-60039 Pinch Assembly - Pincharm assembly - Curved black plastic plate with four small rubber rollers - Does NOT include spring or bushing
C1633-00053 Plate - SIMM Plate - Covers Access to SIMM Slot Connectors
8120-4211 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)
0957-2340 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.
0957-2481 Power Module - Pwra brk uni 12vdc 15w
0950-2623 Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker
C3170-60009 Pulley - Reduction pulley - Includes 2 Bearings, Shaft (0.16in Diameter on Both Ends), Flange, Pulley and Instructions
C1633B-Repair_DesignJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4700-60042 Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder
C2847-60021 Sensor - Media sensor assembly - Includes cable
C2847-60022 Sensor - Pincharm sensor - Includes cable
C1633B-Manual_DesignJet Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
C7769-90066 Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes
C6072-60284 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)
C6072-60285 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)
C6072-60286 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60287 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)
C2848-60011 Spindle - Rollfeed spindle rod assembly (E-size 36 inch ) - Includes spindle and end caps
C1633-60051 Starwheel - Starwheel assembly - Small plastic wheel with metal teeth
C4714-60098 Strip - Encoder strip assembly (E-size) - Includes encoder strip and encoder strip spring
C2847-60044 Switch - Power switch assembly - Includes cable
C1633-40075 Window - Lift-up viewing window (Clear)

bottom bar

Helpfull Links:   | HP Printer Parts 1 2 3 4 5 | SmartSearch |
Home
       Contact Us        Support       Order Status       Site Map   

Copyright © 2016 Partshere.com   Privacy Policy     Terms and Conditions     Send us your Feedback