| C2801-40001 |
Arm - Height sensor arm |
| RB1-0260-000CN |
Arm - Right arm for HP LaserJet IIISi |
| RG5-0070-000CN |
Arm - Bin full sensor arm |
| RG5-0038-000CN |
Block - Left block - Side of main structure before fusing assembly |
| RG5-0039-070CN |
Block - Right block - Side of main structure before fusing assembly |
| C2801-80024 |
Brake - Paper brake - Paper stop for elevator module |
| FB1-0733-000CN |
Brush - Brush - for Cleaning Antistatic Teeth by Transfer Roller |
| C2009-60111 |
Bulkhead - MIO slot bulkhead |
| J2553-60015 |
Bulkhead - MIO slot bulkhead |
| RG5-0128-000CN |
Button - Power switch button |
| C2917A |
Cabinet - Printer cabinet - Has support shelf for paper feeder assembly |
| 24540-80010 |
Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2801-60003 |
Cable - Output stacker interface cable |
| C2801-80014 |
Cable - Output stacker elevator module ribbon cable |
| C2801-80026 |
Cable - Telephone cable assembly - 4-pin (F) RJ-11 connector to 2-pin (F) connector - 22.1cm (8.7in) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| RG5-0103-000CN |
Cable - Cable assembly for HP LaserJet 4Si Series |
| RG5-0104-000CN |
Cable - Cable assembly for HP LaserJet 4Si Series |
| RG5-0108-000CN |
Cable - Cable assembly - From DC controller to paper input board |
| RG5-0109-000CN |
Cable - Cable assembly - From DC controller to duplex board |
| RG5-0130-000CN |
Cable - Cable assembly - From DC controller to formatter board |
| RG5-0156-030CN |
Cable - Cable assembly for HP LaserJet 4Si Series |
| RH2-5104-000CN |
Cable - Fiber optic cable - From DC controller to fiber optic lens |
| 140191A |
Cartridge - 91a yield black toner |
| 140191X |
Cartridge - 91x hi yield black toner |
| 5184-5212 |
Cartridge - Black toner (EP) cartridge |
| 91A |
Cartridge - 91a yield black toner |
| 92291A |
Cartridge - Black toner (EP) cartridge |
| 1492-0167 |
Caster - Caster (without brake) |
| 1492-0168 |
Caster - Caster (with brake) |
| RB1-0818-030CN |
Clip - Transfer roller retaining clip (blue) |
| RG5-0162-000CN |
Control Panel - Control panel assembly - Includes display and keypad |
| C2801-40002 |
Cover - Left cover of transport module - Of optional output stacker |
| C2801-40003 |
Cover - Right cover (on electronic box) of transport module - Is part of optional output stacker |
| RB1-0822-000CN |
Cover - Right side cover - Has built in fan grille |
| RB1-0823-000CN |
Cover - Right rear cover - Next to interface connector panel |
| RB1-0824-000CN |
Cover - Lower rear cover |
| RB1-0825-000CN |
Cover - Front feeder cover - Fits in the top of the upper paper tray opening |
| RG1-2802-000CN |
Cover - Tray top cover - For upper tray, when using the envelope feeder - Includes manual feed guide arms |
| RG5-0067-180CN |
Cover - Rear delivery cover assembly - Includes flapper, rollers, and New style paper guide |
| RG5-0071-140CN |
Cover - Top cover assembly - Has recess for 'face down' paper output |
| RG5-0122-000CN |
Cover - Left side cover - Has cutout for duplex access door |
| RG5-0163-000CN |
Cover - Front upper cover (L-shaped) - Covers the top front and the top right |
| RG5-0171-000CN |
Cover - Replacement top cover |
| RG5-0172-000CN |
Cover - Replacement top cover |
| RG5-0174-000CN |
Cover - Front cover assembly - Has holes for paper trays and control panel |
| C2801-80025 |
Disk - Non-skid disks - Keeps printer in place on cabinet (eight disks per package) - For optional output stacker |
| 5042-0302 |
Door - Rear door - Of paper feeder assembly |
| C2801-80012 |
Door - Cabinet door - For C2801A Output Stacker |
| RB1-0732-000CN |
Door - Font cartridge door (Cover) - Spring loaded - On front panel |
| RB1-0756-000CN |
Door - Duplex access door - Fold down door on left side of printer |
| C2061-69001 |
Duplexer - Duplexer assembly - For two sided printing |
| C2801-60001 |
Elevator - Elevator module - Includes rails and ribbon cable - Mounted in output stacker cabinet (C2801A) |
| C2801-80008 |
Elevator - Elevator module - Includes rails and ribbon cable - Mounted in output stacker cabinet (C2801A) |
| RH7-1104-000CN |
Fan - Tubeaxial fan (low profile) - 24VDC |
| RH7-1162-000CN |
Fan - Tubeaxial fan for HP LaserJet 4Si Series |
| RH7-1163-000CN |
Fan - Tubeaxial fan (low profile) |
| C2009-69007 |
Feeder - Paper input unit - Complete paper feed |
| C2060-69001 |
Feeder - Automatic envelope feeder - Holds 100 envelopes |
| C2921-63001 |
Feeder - Paper input feeder assembly - Holds 1500 sheets |
| RG5-0025-220CN |
Feeder - Paper input unit - Complete paper feed |
| RG5-0056-000CN |
Feeder - Paper refeed unit |
| 92296T |
Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series |
| 92296U |
Film - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP |
| RF5-0091-000CN |
Flapper - Flapper - Directs paper path - To top or rear output tray |
| RB1-0692-000CN |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| 33491-69012 |
Fuser Assembly - Fusing assembly (120V, 60Hz) - Bonds toner to paper by heat |
| 33491-69013 |
Fuser Assembly - Fusing assembly (240V, 50Hz) - Bonds toner to paper by heat |
| 5181-2254 |
Fuser Assembly - Fusing assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains five new fusing assemblies) |
| 5181-2255 |
Fuser Assembly - Fusing assembly (For 240V, 50Hz operation) - Bonds the toner to the paper with heat - In quantity price break packaging (Contains ten new fusing assemblies) |
| RG5-0046-530CN |
Fuser Assembly - Fuser Assembly (120V, 60Hz) - Bonds toner to paper by heat |
| RG5-0047-530CN |
Fuser Assembly - Fuser Assembly (240V, 50Hz) - Bonds toner to paper by heat |
| 5181-8709 |
Guide - Duplex paper guide - In paper feeder assembly - Large curved metal piece that guides paper back into duplexer |
| C2801-80017 |
Guide - Paper exit guide - Provides a smooth paper path from the printer to the transport assembly (Includes installation instructions) |
| RB1-0221-000CN |
Guide - Upper paper transfer guide |
| RB1-0472-030CN |
Guide - Upper delivery guide (Curved plastic piece) - Guides paper into the top output tray |
| RB1-0557-040CN |
Guide - Paper guide - Attaches to the delivery cover on the printer - Aids in preventing paper jams |
| RG5-0045-000CN |
Guide - Transfer guide - Ribbed plastic plate behind transfer roller |
| RB1-0854-020CN |
Hardware - Fusing assembly mounting screw |
| C2801-80022 |
Holder - Power module holder - Holds power module for paper feeder |
| RB1-0485-000CN |
Holder - Top cover output bin full sensor arm holder |
| J2552-60001 |
JetDirect - JetDirect CARD RJ45 10 BASE-T INTERNAL PRINT SERVER 10-100Base-TX or 10Base-2 Local Talk |
| J4106-60002 |
JetDirect - Hewlett Packard HP JetDirect 400N Internal Print Server J4106-60002 J4106A ID FOR RECV ONLY ORDER J4106-61001 (INTL USE ONLY) |
| C2009-69008 |
Job Offset - Job offset assembly |
| RG5-0381-260CN |
Job Offset - Job Offset Assy - Top Cover Paper Delivery Assembly |
| 5021-0377 |
Kit - Manual Kit for 5000 C40, LaserJet 6P Series, DesignJet 450, DesignJet 430 |
| C2010-67909 |
Kit - Self paced training kit for LaserJet 3Si, 4Si and 4Simx - Includes service manual, NTSC format video (VHS) and five tests |
| C2010-67910 |
Kit - Self paced training kit for LaserJet 3Si, 4Si and 4Simx - Includes service manual, PAL format video (VHS) and five tests |
| C2010-99027 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (German) |
| C2010-99029 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Danish) |
| C2010-99030 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (European English) |
| C2010-99031 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Italian) |
| C2010-99032 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Swedish) |
| C2010-99033 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Dutch) |
| C2010-99034 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (French) |
| C2010-99035 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Norwegian) |
| C2010-99037 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (Portuguese) |
| C2010-99039 |
Kit - C2010A LaserJet 4Si user's manual kit - Includes network notes, software application notes, user's reference manual, operator's and quick reference guides (US English) |
| 92296E |
Label - LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box |
| 92296F |
Label - LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per box |
| 92296G |
Label - LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per box |
| 92296H |
Label - LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per box |
| 92296J |
Label - LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per box |
| 92296K |
Label - LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per box |
| 92296L |
Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 14 per sheet - 100 sheets per box |
| 92296M |
Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.38cm (1.33in) labels on A4 size (21.0cm x 29.7cm) sheet - 16 per sheet - 100 sheets per box |
| 92296N |
Label - LaserJet/DeskJet printer labels - 6.35cm (2.52in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 21 per sheet - 100 sheets per box |
| 92296P |
Label - LaserJet/DeskJet printer labels - 10.0cm (3.94in) x 5.10cm (2.01in) labels on A4 size (21.0cm x 29.7cm) sheet - 10 per sheet - 100 sheets per box |
| 92296R |
Label - LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per box |
| C2009-69003 |
Laser Scanner - Laser/scanner assembly |
| C2801-80013 |
Latch - Latch - For door of optional output stacker |
| XZ9-0379-000CN |
Latch - Door latch insert (Black) |
| C2062-67902 |
Maintenance Kit - Maintenance kit - For 120 VAC - Replacement parts after 200K pages - Includes transfer roller and clip, six pick-up separation rollers, duplex roller, and 120 VAC fusing assembly |
| C2062A |
Maintenance Kit - Maintenance kit - Replacement parts after 200K pages (120V) includes, transfer roller and clip, 6 pickup separation rollers, duplex roller, and (120V) Fuser Assembly |
| C2087-67902 |
Maintenance Kit - Maintenance kit - For 240 VAC - Replacement parts after 200K pages - Includes transfer roller and clip, 6 pickup separation rollers, duplex roller, and 240 VAC fusing assembly |
| C2087-69001 |
Maintenance Kit - Maintenance kit - Replacement parts after 200K pages (240V) includes, transfer roller and clip, 6 pickup separation rollers, duplex roller, and (240V) fusing assembly |
| C2087A |
Maintenance Kit - Maintenance Kit |
| 5021-8943 |
Manual - LaserJet quick reference guide - Covers LaserJet Classic, II series, III series, 4 sereis, 5 series, 6 series and 5Si - Volume 1 of 2 volume set |
| 5090-3390 |
Manual - LaserJet Quick Reference Guide - Covers 1100, 2100, 3100, 4000, 5000 and 8000 series printeres - Volume 2 of 2 volume set |
| C2010-90901 |
Manual - LaserJet 4Si/4Si MX printer users reference manual |
| C2010-90903 |
Manual - C2010A LaserJet 4Si getting started manual (English) |
| C2010-90939 |
Manual - 33491A/C2010A LaserJet IIISi/4Si combined service manual |
| C2010-99036 |
Manual - Manual Kit for LaserJet 4Si Series |
| C2801-90003 |
Manual - C2801A Output Stacker Users Manual |
| C2921-90003 |
Manual - C2920A/21A Paper Feeder Service Manual |
| C2921-90004 |
Manual - C2920A/21A Paper Feeder Users Manual |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C2065A |
Memory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models. |
| C2066A |
Memory - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX |
| D2150-69001 |
Memory - 1MB, 80nS, 36-bit SIMM memory module |
| D2152-63001 |
Memory - 8MB, 80nS, 36-bit SIMM memory module |
| D2152-69001 |
Memory - 8MB, 80nS, 36-bit SIMM memory module |
| D2156-63001 |
Memory - 4MB, 80nS, 36-bit SIMM memory module |
| D2156-69001 |
Memory - 4MB, 80nS, 36-bit SIMM memory module |
| D2381-63001 |
Memory - 2MB, 80nS, 36-bit SIMM memory module |
| RG5-0069-000CN |
Mirror - Mirror assembly - Mounted on underside of top cover |
| C2801-60002 |
Module - Electronic box (240v) |
| J2382-69003 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2383-61005 |
Module - External token ring interface module - Has DB-9 connector |
| J2590-61011 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2590-69001 |
Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors |
| J2592-61001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J2592-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J2593-69001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) input connectors and three parallel (DB-25) output connectors w/power supply. |
| J2594-61011 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3258-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4102-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4102-69022 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| 5181-8774 |
Motor - Elevator motor for HP LaserJet IIISi |
| 5181-8775 |
Motor - Feed roller motor |
| C2801-80006 |
Motor - Transport module stepper motor |
| C2801-80009 |
Motor - Elevator motor for HP LaserJet IIISi |
| RG5-0027-000CN |
Motor - Motor assembly - Drive for paper pickup roller |
| RG5-0040-060CN |
Motor - Main motor assembly |
| RH7-1102-000CN |
Motor - Horizontal registration motor |
| RH7-1103-000CN |
Motor - Switchback motor |
| 5063-1260 |
Nosepiece - Nosepiece assembly - Inserts into printer - Part of paper feeder - For A4 size (210mm x 297mm) and serial prefix > and = H3000001 |
| 5063-1261 |
Nosepiece - Nosepiece assembly - Inserts into printer - Part of paper feeder - For letter size (8.5 x 11 inches) and serial prefix = and > H3100001 |
| 5181-8711 |
Nosepiece - Nosepiece assembly - Inserts into printer - Part of paper feeder - For A4 size (210mm x 297mm) and serial prefix < and = H2004726 |
| 5181-8721 |
Nosepiece - Nosepiece assembly - Inserts into printer - Part of paper feeder - For letter size (8.5 x 11 inches) and serial prefix < and = H2108818 |
| 5063-1219 |
PC Board - Paper feeder main logic board |
| 5063-1249 |
PC Board - Paper feeder main logic board |
| C2009-67901 |
PC Board - Formatter (Main Logic) board |
| C2009-69001 |
PC Board - Formatter (Main logic) board |
| C2009-69002 |
PC Board - DC controller board |
| J2371-69001 |
PC Board - EtherTwist 10Base-T interface board |
| J2373-60001 |
PC Board - Token ring interface board - Has DB-9 connector |
| J2550-69013 |
PC Board - EtherTwist 10Base-T LAN interface board |
| J2553-61006 |
PC Board - EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk Board |
| J2555-69013 |
PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J4100-69001 |
PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| J4106-69001 |
PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector |
| RG5-0034-100CN |
PC Board - Paper input board |
| RG5-0042-000CN |
PC Board - Main motor board - With mount |
| RG5-0052-060CN |
PC Board - Duplex drive board - In (Optional) duplexing unit |
| RG5-0094-000CN |
PC Board - Sensor board for HP LaserJet 4Si Series |
| RG5-0842-000CN |
PC Board - DC controller board |
| J2552B |
PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors |
| J2555B |
PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors |
| J2556B |
PC Board Interface - EtherTwist (10Base-T) or 100Base-TX LAN interface board - Has an RJ-45 connector |
| J2590A |
PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors |
| J2591-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2591A |
PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors |
| J2594-69001 |
PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3258-61041 |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3258B |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100A |
PC Board Interface - JetDirect 400N modular input/output (MIO) - Internal print server - Provides 10/100Base-T or 10Base-2 network connection using RJ45 or BNC connectors |
| J4101B |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
| J4102B |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4105A |
PC Board Interface - JetDirect 400N modular input/output (MIO) internal print server - Provides token ring network connection using RJ45 or DB9 connectors |
| J4106A |
PC Board Interface - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector |
| 5181-8710 |
Pedestal - Printer pedestal - Used with paper feeder assembly |
| RB1-0262-000CN |
Pivot - Pivot - Small 'rolling pin' shaped part that inserts into arm that holds right side of Transfer Roller |
| C2009-00006 |
Plate - Lower MIO Cover Plate - For empty MIO slot |
| C2009-60109 |
Plate - Upper MIO Cover Plate - For empty MIO slot |
| C2013-69001 |
PostScript - Postscript SIMM (level two) - With 35 adobe fonts |
| C2013A |
PostScript - Adobe`s postscript (Level 2) SIMM module - With 35 fonts |
| 8120-1351 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1378 |
Power Cord - Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-2104 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Switzerland) |
| 8120-2371 |
Power Cord - Power cord (Black) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA and Canada) |
| 8120-2956 |
Power Cord - Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| 8120-4211 |
Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India) |
| 8120-4753 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 100V in Japan) |
| 8120-6302 |
Power Cord - Daisy chain power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output |
| 0950-3169 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0950-3171 |
Power Module - Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U. K. and Hong Kong) |
| 0950-3172 |
Power Module - Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) |
| 0950-3349 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
| 0950-3350 |
Power Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong) |
| 0950-3351 |
Power Module - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
| 0950-3352 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
| 0950-3354 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 220-250VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (South Africa) |
| 0957-2109 |
Power Module - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel) |
| 0957-2110 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2134 |
Power Module - Wall mount power supply module (MEI-AH ED12010) - 100VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (for use in Japan) |
| 0957-2197 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2340 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2481 |
Power Module - Pwra brk uni 12vdc 15w |
| 5181-8759 |
Power Module - Power module - Supplies power to paper feeder assembly |
| 5188-5676 |
Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
| 5188-6700 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector |
| 9100-5176 |
Power Module - Pwer supply, 13v/300ma jpn |
| 0950-2623 |
Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker |
| 0957-2192 |
Power Supply - Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 800mA (Europe and Israel) |
| 0957-2194 |
Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
| 0957-2228 |
Power Supply - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2229 |
Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide) |
| 5188-5673 |
Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
| C2009-69005 |
Power Supply - DC power supply assembly - 120VAC, 60Hz |
| RG5-0164-000CN |
Power Supply - AC power supply/sensor board - 120VAC, 60Hz |
| RG5-0165-000CN |
Power Supply - AC power supply/sensor board - 240VAC, 50Hz |
| RG5-0166-060CN |
Power Supply - AC power supply - 120VAC, 60Hz |
| RG5-0167-060CN |
Power Supply - AC power supply - 240VAC, 50Hz |
| RG5-0168-000CN |
Power Supply - DC power supply assembly - 120VAC, 60Hz |
| RG5-0169-000CN |
Power Supply - DC power supply assembly - 240VAC, 50Hz |
| RG5-0170-080CN |
Power Supply - High voltage power supply assembly (transformer) |
| J2341-60128 |
Print Server - AppleTalk (LocalTalk) interface board - Has DIN-8 connector |
| J2371-60001 |
Print Server - EtherTwist (10Base-T) Interface Board (J2371A) |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4100-61001 |
Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors |
| J4101-61011 |
Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector |
| J4106-61001 |
Print Server - JetDirect 400N modular input/output (MIO) internal print server - Provides 10Base-T network connection using RJ45 connector |
| J4169-61001 |
Print Server - JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector |
| C2010A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| 5181-8708 |
Roller - Replacement feed roller kit - Includes two rollers, retainer clips and instructions |
| H3976-60001 |
Roller - Paper pickup repair kit - Contains 6 Feed/Separation rollers - Procedure requires service manual |
| RF5-0041-020CN |
Roller - Pickup separation roller - Located in paper input unit |
| RF5-0081-000CN |
Roller - Duplex roller (D-shaped) - In (Optional) duplexing unit |
| RG5-0141-000CN |
Roller - Transfer charge roller (Black) - Held in place w/ blue clip |
| RG5-0161-090CN |
Roller - Registration assembly - Next set of rollers after paper pickup |
| 5181-8719 |
Sensor - Nosepiece sensor |
| 5181-8763 |
Sensor - Nosepiece sensor |
| RG5-0116-000CN |
Sensor - Output door sensor assembly |
| WG8-5038-020CN |
Sensor - Photo sensor for HP LaserJet IIISi |
| C2010A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C2801-69004 |
Service Parts - Transport module of optional output stacker - Does NOT include height sensor arm, electrical box, or left and right covers |
| RB1-0811-000CN |
Shaft - Power switch shaft - From front panel button to power switch |
| C2801-80021 |
Shelf - Paper feeder support shelf |
| C2801-80007 |
Shield - Decurler roller wrap shield |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| C2801-80019 |
Solenoid - Elevator solenoid |
| RG5-0063-000CN |
Solenoid - Flapper solenoid (SL6) - Controls rear or top paper output |
| RG5-0064-000CN |
Solenoid - Duplex deflector (Feed guide) solenoid (SL7) - In job offset |
| RG5-0065-060CN |
Solenoid - Job Offset solenoid |
| RH7-5031-000CN |
Solenoid - Clutch solenoid (24VDC) |
| RB1-0734-000CN |
Spring - Torsion spring for font cartridge door |
| RS5-2021-000CN |
Spring - Compression spring - For arm that holds right side of transfer roller |
| C2801-80015 |
Switch - Door interlock switch |
| C2801-80020 |
Switch - Stacker full switch |
| RG5-0102-030CN |
Switch - Power switch assembly |
| RH7-6020-000CN |
Switch - On/off rocker switch for power switch assembly - 250V, 16A |
| 92291B |
Tray - HP LaserJet IIISi letter paper input tray |
| 92291C |
Tray - HP LaserJet IIISi Legal Paper input tray |
| 92291D |
Tray - HP LaserJet IIISi A4 Paper input tray - Holds 500 sheets of 8.3inch x 11.6inch A4 size paper |
| 92291E |
Tray - LaserJet IIISi Executive Paper input tray |
| RG5-0073-000CN |
Tray - Output tray assembly |
| C2018-67901 |
Upgrade Kit - Upgrade kit - If printer is non-Energy Star Compliant, this kit makes it compliant - Includes SIMM for formatter board |
Techical Help
View service parts