Partshere Shopping Cart Lexmark and HP New Oem and refurb parts
top bar
C2608A deskjet 505j printer

HP deskjet 505j printer (C2608A)

MFG Part Number: C2608A

HP parts list for C2608A HP deskjet 505j printer

C2113-80010 Absorber - Ink absorber for HP DeskJet 500 Series
C2608A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C2608A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2608A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
02276-40016 Arm - 'Paper out' (OOPS flag) sensor arm
C2608A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2608A-Arm_Door Arm Door - Carriage access door sensor arm
C2608A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper
C2608A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter
C2608A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray
C2608A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt
C2608-60103 Base - Base - Bottom cover (plastic piece ONLY)
C2608A-Battery Battery - Battery pack for hp printer
C2106-40012 Belt - Carriage belt for HP DeskJet 500 Series
C2608A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C2608A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C2608A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2113-40005 Bracket - Wiper bracket - Supports and positions the black wiper
C2608A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)
C2608A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)
C2608A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley
02276-80053 Cable - Cable assembly which connects the main logic board to the print mechanism
C2608-60114 Cable - Cable assembly for HP DeskJet 525Q
C2608A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor
C2608A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C2608A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C2608A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C2608A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C2608A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2124-40109 Cap - Color cap - Seals print cartridge nozzel when parked
C2608A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2113-60032 Carriage - Carriage assembly - Holds and positions print cartridges
C2608A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2608A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2608A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2608A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2608A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage
C2608A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2608A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2608A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2608A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
C2106-40003 Chassis - Print mechanism chassis assembly - The base structure of the print mechanism
C2608A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2113-40010 Clamp - Motor clamp - Holds ramp motor in place
02276-00015 Clip - Carriage rod ground clip
C2608A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2608A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.
02276-40047 Cover - Slot cover - Used to cover empty font cartridge (butch plate)
C2608-60101 Cover - Paper access cover assembly - Lift-up top/front cover
C2608-60102 Cover - Top cover - Has cutouts for keypad and font cartridges
C2608-60105 Cover - Output tray cover - Smoked plastic
C2608A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.
C2608A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2608A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2608A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2608A-Display Display - Status led display (LCD display assembly).
C2608A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C2608A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C2608A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C2608A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C2608A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability
C2608A-Encoder Encoder - Encoder spring - provides tension for encoder strip
C2608A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper
C2608A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference
C2608A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C2608A-Extender_Output Extender Output - Paper exit tray extension
C2608A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit
C2608A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly
C2608A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C2608-60116 Firmware - ROM (Firmware) - Contains specialized localization font
C2608A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor
C2128-40063 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (two used)
C2608A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C2608A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons
02276-40017 Gear - Idler gear - 18 tooth - Between transmission and cam gear
02276-40020 Gear - Idler gear - 33 tooth - Between transmission and cam gear
02276-40022 Gear - Pivot gear - Transmits motion from pivot to transmission gears
02276-40024 Gear - Cam gear - Controls movement of pressure plate for picking and kicking operations
02276-40055 Gear - Cluster gear - Provides gear reduction between paper motor and drive rollers
02276-40064 Gear - Transmission gear - Transmits motion of pick trigger to initiate paper pick or kick cycle
02276-40116 Gear - Pinion gear - 17 tooth - Controls movement of follower
C2608A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor
C2608A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station
C2608A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station
C2608A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C2608A-Gear_Station Gear Station - Gears on shaft of spittoon station
C2608A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.
C2608A-Glass_Assy Glass Assembly - Main top copier glass assembly.
02276-40079 Grommet - Grommet (vibration isolator/shock absorber)
02276-00021 Guide - Carriage guide - Cross piece that holds pinch rollers
02276-40105 Guide - Left wall - Supports media on left side
02276-40106 Guide - Paper pusher - Pushes against media to maintain correct edge alignment
C2608A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C2608A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C2608A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.
C2608A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C2608A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly
C2608-60104 Keypad - Keypad assembly
02276-80061 Label - Label for DeskJet 500 Series, DeskJet 500, DeskJet 505, DeskJet 525
C2113-60035 Motor - Carriage drive motor assembly - Includes ribbon cable
C2113-60069 Motor - Paper advance motor
C2608-60111 Motor - Service station motor
C2608A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly
C2608A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C2114-80003 NamePlate - Nameplate - DeskJet 500C printer logo
C2114-80004 Overlay - Keypad overlay - Identifies function buttons on top cover
C2608A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
Q7981A Pan - Advanced High-Gloss Photo Paper - 13cm (5in) x 18cm (7in) - 20 sheets (Japan)
C2113-60009 PC Board - Head driver board - Print cartridge firing control
C2608-60112 PC Board - Head driver board - Circuitry to fire print cartridge
C2608-60113 PC Board - Power supply board
C2608-60115 PC Board - Main logic board
C2608-60120 PC Board - Head driver board
C2608A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C2608A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C2608A-PC_BRD_Interface PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C2608A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
02276-40067 Pivot - Black plastic part under platten - Supports pick roller
C2106-60040 Plate - Pressure plate - Lifts the stack of paper to be printed
02276-00006 Platen - Printer platen - Silver colored metal plate that supports paper during printing process
C2608A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C2608A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C2608A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C2608A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).
C2608A-Power_Supply_BRD Power Supply Board - High voltage power supply board
C2608-60107 Print Mechanism - Print mechanism assembly - Complete mechanism with carriage movement, paper picking and service station
C2608A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2114-40052 Pulley - Idler pulley with bearing - Mounts on idler shaft
C2608A-Pulley Pulley - Paper pick up tray motor pulley.
C2608A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
02276-40122 Retainer - Cable retainer - Routes flex cable between the carriage and the head driver PCA
C2113-40052 Retainer - Sled ramp - Plastic tumbler that retains sled for cartridges
C2113-20006 Rod - Carriage rod - Shaft that the carriage assembly rides on
C2114-40051 Rod - Interposer end effector rod - Interfaces between triggers and follower to initiate picking and kicking of paper
C2608A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on
C2608A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on
02276-60056 Roller - Main drive roller - Drives media through printer
02276-60094 Roller - Pinch roller - Ensures contact between paper and main roller
C2608A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.
C2608A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C2106-40009 Sensor - Follower for HP DeskJet 500K
C2608A-Sensor_Exit Sensor Exit - Exit media sensor sv
C2608A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor
C2608A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C2608A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.
C2608A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C2608A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C2608A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C2114-20001 Shaft - Idler shaft (New style)
C2113-40001 Sled - Color sled - Caps the color print cartridge when not in use
C2113-60078 Sled - Sled assembly - Caps black print cartridge when not in use
C2608A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C2608A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C2608A-Speaker Speaker - Speaker assembly - includes speaker cable.
C2608A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
02276-00010 Spring - Transmission alignment spring - Three metal fingers that hold tensions on transmission gears
02276-20016 Spring - Platen spring - Maintains height of platen in relation to thickness of input paper stack
02276-20026 Spring - Paper pusher spring - Provides pressure on paper pusher - Maintains correct media alignment for paper input tray
02276-20028 Spring - Unloader spring - Applies tension to the unloader
02276-20030 Spring - End effector spring - Flexible link between carriage and interposer end effector
02277-00005 Spring - Preloader - Applies pressure to drive shaft and ensures that drive gear keeps full contact with cluster gear
1460-1940 Spring - Compression spring - 302 stainless steel, passivity finish, 0.875in long, 0.36in OD, 0.026in wire diameter, 4.17 in/lb rate - On pulley wedge, for carriage belt tension
C2106-00008 Spring - Pinchwheel spring - Holds pinch rollers in place
C2106-20003 Spring - Paper spring - Maintains upward pressure on pressure plate
C2113-00003 Spring - Sled spring - Maintains left sled alignment in sled ramps
C2608A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge for carriage belt tension
C4562-60018 Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor'
02277-00006 Strip - Ground strip - Provides logic PCA ESD protection
C2113-40008 Support - Right wall - Right side mounting surface for carriage motor and carriage rod - Maintains alignment of transmission gears
C2608-60118 Switch - Power switch assembly
C2608A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
02276-40114 Tray - Input extension tray (paper catch) - Slides out for legal size paper
C2608-60106 Tray - Paper output tray
C2608A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).
C2608A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C2608A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.
02276-40125 Trigger - Trigger - Initiates paper pick or kick cycle
C2114-40010 Trigger - Pick trigger - Initiates paper pick cycle
02276-40120 Unloader - Unloader - Prevents triggers from activating mechanism continuously
07440-40055 Wedge - Pulley wedge - For carriage belt tension
C2608A-Window Window - Top/front access door assembly - print cartridge access door window.
C2113-40006 Wiper - Wiper - Cleans ink and debris from print nozzles
C2113-40023 Wiper - Color wiper - Cleans ink and debris from print nozzle

deskjet 505j printer parts list
bottom bar