| C2642-60206 |
Absorber - 'Spittoon' foam - Holds excess ink |
| C2642A-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
| C2642A-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
| C2642A-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
| C2642A-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
| C2642A-Arm_Door |
Arm Door - Carriage access door sensor arm |
| C2642A-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
| C2642A-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
| C2642A-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
| C2642A-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
| C2642-60232 |
Base - Printer base assembly - Bottom plate of printer |
| C2642A-Battery |
Battery - Battery pack for hp printer |
| C2642-60216 |
Belt - Carriage belt - Drives the carriage assembly - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA |
| C2642A-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
| C2642A-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
| C2642A-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
| C2642A-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
| C2642A-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
| C2642A-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
| C2642-60225 |
Bushing - Shaft sleeve bushing - Supports lower carriage rod sleeve |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C2642A-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
| C2642A-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
| C2642A-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
| C2642A-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
| C2642A-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
| C2642A-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
| C2642-60208 |
Cap - Protective cap - Covers the 'Color' print cartridge nozzle when not in use |
| C2642-60213 |
Cap - Service station wire cap - Supports flex cable |
| C2642A-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
| C2642-60215 |
Carriage - Carriage assembly - Includes flex circuit (to main logic board) - Should be replaced only by experienced service personnel - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA |
| C2642A-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
| C2642A-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
| C2642A-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
| C2642A-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
| C2642A-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
| C2642A-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
| C2642A-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
| C2642A-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
| C2642A-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
| 51625A |
Cartridge - HP 25 Color InkJet Crtg NAM |
| 51625AA |
Cartridge - HP 25 Color InkJet Crtg AP |
| 51625AC |
Cartridge - Tri-color ink print cartridge - Prints approximately 150 pages based on 13.5% total density (4.5% for each color) on a 8in by 10in print area (canada) |
| 51625AL |
Cartridge - HP 25 Color InkJet Cartridge LAR |
| 51626A |
Cartridge - HP 26A print cartridge (Black) - High capacity, 40ml volume - Prints approximately 790 pages (actual yield depends on specific use)(North America) |
| 51626AA |
Cartridge - HP 26A Lge Black InkJet Crtg AP |
| 51626AC |
Cartridge - HP 26A Lge Black InkJet Crtg Can |
| 51626AL |
Cartridge - HP 26A Lge Black InkJet Crtg LAR |
| 51626G |
Cartridge - Black Print Cartridge (Regular) - Prints Approximately |
| 51626GA |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Asia/Pacific) |
| 51626GC |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Canada) |
| 51626GE |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Europe) |
| 51626GL |
Cartridge - Black print cartridge (Regular) - Prints approximately 397 pages based on 5% density on a 8in by 10in print area (Latin America) |
| 51626TE |
Cartridge - Black print cartridge (High capacity) - (2 pack of 51626AE) - Each one prints approximately 800 pages based on 5% density on a 8in by 10in print area (Europe) |
| 5183-5267 |
Cartridge - Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.0 cartridges |
| C6611AN |
Cartridge - Black print cartridges (high capacity) - (two-pack of 51626A) each prints approximately 800 pages based on 5% density on an 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C2642-60212 |
Chassis - Chassis (Metal) - Internal support structure for printer |
| C2642A-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
| C2642A-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
| C2642A-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
| C2642-60201 |
Cover - Front cover - Has cutouts for buttons and status LEDS - Does NOT include front access door |
| C2642-60209 |
Cover - Centronics connector cover - Connector bezel |
| C2642-60210 |
Cover - Back case - Back cover of printer |
| C2642A-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
| C2642A-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
| C2642A-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
| C2642A-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
| C2642A-Display |
Display - Status led display (LCD display assembly). |
| C2642-60202 |
Door - Front access door (Drop down door) - For accessing print cartridge |
| C2642A-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
| C2642A-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
| C2642A-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
| C2642A-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
| C2642A-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
| C2642A-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
| C2642A-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
| C2642A-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
| C2642A-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
| C2642A-Extender_Output |
Extender Output - Paper exit tray extension |
| C2642A-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
| C2642A-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
| C2642A-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
| C3828A |
Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. |
| C3832A |
Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
| C3834A |
Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series |
| C3835A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C3836A |
Film - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets |
| C3837A |
Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series |
| C6051A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C6053A |
Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series |
| C2642A-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
| C2642A-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
| C2642A-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
| C2642A-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
| C2642A-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
| C2642A-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
| C2642A-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
| C2642A-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
| C2642A-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
| C2642A-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
| C2642-60239 |
Guide - Paper guide - Paper path through in/out pinch rollers |
| C2642-60248 |
Guide - Right paper guide (Small L-shaped metal piece) |
| C2642-60249 |
Guide - Left paper guide (Small L-shaped metal piece) |
| C2642-60262 |
Guide - Width adjust - Holds media against right wall of input tray |
| C2642A-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
| C2642-60214 |
Holder - Flex cable holder - Two parts - Holds flex cable to chassis |
| C2642A-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
| C2642A-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
| C2642A-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
| C2642A-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
| 5183-3032 |
Kit - ASP training kit - Service manual CD-ROM and NTSC training videos for 400, 540, 600, and 700 family DeskJet printers |
| 92296E |
Label - LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box |
| 92296F |
Label - LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per box |
| 92296G |
Label - LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per box |
| 92296H |
Label - LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per box |
| 92296J |
Label - LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per box |
| 92296K |
Label - LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per box |
| 92296L |
Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 14 per sheet - 100 sheets per box |
| 92296M |
Label - LaserJet/DeskJet printer labels - 9.91cm (3.90in) x 3.38cm (1.33in) labels on A4 size (21.0cm x 29.7cm) sheet - 16 per sheet - 100 sheets per box |
| 92296N |
Label - LaserJet/DeskJet printer labels - 6.35cm (2.52in) x 3.81cm (1.50in) labels on A4 size (21.0cm x 29.7cm) sheet - 21 per sheet - 100 sheets per box |
| 92296P |
Label - LaserJet/DeskJet printer labels - 10.0cm (3.94in) x 5.10cm (2.01in) labels on A4 size (21.0cm x 29.7cm) sheet - 10 per sheet - 100 sheets per box |
| 92296R |
Label - LaserJet/DeskJet printer labels - 20.0cm (7.86in) x 28.9cm (11.4in) labels on A4 size (21.0cm x 29.7cm) sheet - One per sheet - 100 sheets per box |
| C2642-60233 |
Lever - Paper adjust lever - Adjusts for width of paper input |
| C2642-90101 |
Manual - DeskJet 400 users manual (US English, French, Spanish, and Portuguese) |
| C2642-90102 |
Manual - DeskJet 400 users manual (German) |
| C2642-90103 |
Manual - DeskJet 400 users manual (Spanish, Italian, Portuguese, and UK English) |
| C2642-90104 |
Manual - DeskJet 400 users manual (Norwegian, Swedish, Danish, and Finnish) |
| C2642-90105 |
Manual - DeskJet 400 users manual (Polish, Czechoslovakian, Hebrew, and Hungarian) |
| C2642-90106 |
Manual - DeskJet 400 users manual (Russian, Greek, Turkish, and Arabic) |
| C2642-90107 |
Manual - DeskJet 400 users manual (UK English) |
| C2642-90108 |
Manual - DeskJet 400 users manual (Traditional Chinese) |
| C2642-90109 |
Manual - DeskJet 400 users manual (Simplified Chinese) |
| C2642-60221 |
Motor - Carriage drive motor assembly |
| C2642-60247 |
Motor - Service station motor for Hewlett Packard office printers. |
| C2642A-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
| C2642A-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
| C2642A-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
| 51634Y |
Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets |
| 51634Z |
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
| C1812A |
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
| C1824A |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| C1825A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets |
| C3831A |
Paper - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series |
| C3833A |
Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
| C5973A |
Paper - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package |
| C5976A |
Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package |
| C5976B |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets |
| C6039A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6587AN |
Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art |
| C6817A |
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
| C6828A |
Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes |
| C6955A |
Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
| C6979A |
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets |
| C6983A |
Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package |
| C7007A |
Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets |
| C7018A |
Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes |
| C7019A |
Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) |
| Q7852A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C2642-60300 |
PC Board - Main logic board - Includes logic, power supply, motor and head driver electronics - Russian only |
| C2642-69204 |
PC Board - Main logic board - Includes logic, power supply, motor and head driver electronics |
| C2642A-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
| C2642A-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
| C2642A-PC_BRD_Interface |
PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. |
| C2642A-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
| C2642-60263 |
Plate - Pinch Plate - Does not include springs |
| C2642-60277 |
Plate - Pressure plate assembly - Lifts the stack of paper in the input tray |
| C2652-60233 |
Plate - Pressure Plate Lever Assembly (plate with lever) - Pushes the stack of paper up to Feed Rollers |
| C2642-60264 |
Platen - Platen Assembly - Provides printing surface for the carriage assembly - Contains OOPS flag |
| 8120-6312 |
Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in Australia, Argentina, New Zealand, and China) |
| 8120-6313 |
Power Cord - Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 110-120VAC in the United States, Canada, Mexico, Latin America, and Taiwan) |
| 8120-6314 |
Power Cord - Power cord (Black) - 18 AWG, two conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South America, Switzerland, Denmark, Netherlands, and France) |
| 8120-6315 |
Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom and Singapore) |
| 8120-6316 |
Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 100V in Japan) |
| 8120-6317 |
Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in South Africa, India, and Saudi Arabia) |
| 8120-8441 |
Power Cord - Power cord (Black) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea) |
| 8121-0702 |
Power Cord - Power cord (Black, Volex Z730966) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in India) |
| C2642A-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
| 0950-3490 |
Power Module - Power supply module (Yokogawa AT7001A) - 100-240VAC input, 50/60Hz, 400mA - 24VDC output, 500mA - Requires separate AC power cord - Not for use in Korea |
| 9100-5124 |
Power Module - Power supply module (transformer) - 120vac input, 58-62hz - 30vdc output, 400ma - does not require separate ac power cord (usa, canada, mexico) |
| 9100-5127 |
Power Module - Power supply module (transformer) - 240VAC input, 58-62Hz - 30VDC output, 400mA (Australia) |
| 9100-5128 |
Power Module - Power supply module (transformer) - 220VAC input, 48-52Hz - 30VDC output, 400mA (South Africa) |
| 9100-5129 |
Power Module - Power supply module - 220VAC input, 48-52Hz - 30VDC output, 400mA (China, Argentina) |
| 9100-5130 |
Power Module - Power supply module (transformer) - 100VAC input, 48-66Hz - 30VDC output, 400mA (Japan) |
| 9100-5131 |
Power Module - Power supply module (transformer) - 240VAC input, 48-52Hz - 30VDC output, 400mA (U. K.) |
| 9100-5132 |
Power Module - Power supply module (transformer) - 230VAC input, 48-52Hz - 30VDC output, 400mA (Europe) |
| 9100-5348 |
Power Module - Power supply module (transformer) - 220VAC input, 48-52Hz - 30VDC output, 400mA (Hong Kong) |
| C2642A-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
| C2642A-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
| C2642A-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
| C2642A-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
| C2642-69200 |
Print Mechanism - Complete printer mechanism without external covers |
| C2642A-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
| C2642-60220 |
Pulley - 'Turn around' pulley assembly - Includes idler pulley and housing - Provides carriage belt tension |
| C2642A-Pulley |
Pulley - Paper pick up tray motor pulley. |
| C2642A-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C2642A-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
| C2642A-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
| C2642-60230 |
Roller - Pinch roller (Input rollers) - Mounts in bottom of paper trough assembly (Part number is for one roller) |
| C2642-60240 |
Roller - Output roller (Black foam) - Mounts to the platen assembly |
| C2652-60239 |
Roller - Feed roller assembly (Shaft with three large rollers on it) - Includes gears and clutch |
| C2642A-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
| C2642A-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
| C2642A-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
| C2642A-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
| C2642A-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
| C2642A-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
| C2642-60259 |
Separator - Tray separator - Separates output and input paper |
| C2642A-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
| C2642A-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
| C6450-60020 |
Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 |
| C6450-60021 |
Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1 |
| 8120-6732 |
Service Parts - UTG THEN USE 9100-5124 Power Mod,US/Can. |
| C2642-60200L |
Service Parts - Mech Assy Dj400 |
| C2642-60203 |
Service Parts - Screws |
| C2642-60228 |
Service Parts - E-Clip |
| C2642-60234 |
Service Parts - Assy, Pressure Plate |
| C2642-60235 |
Service Parts - New#c2652-60233,Assy.Lever Press.Plate |
| C2642-60236 |
Service Parts - Screws, Base Bottom |
| C2642-60237 |
Service Parts - Screws, Print Zone Assy |
| C2642-60241 |
Service Parts - New#c2652-60239,Assy.Drive |
| C2642-60243 |
Service Parts - New#c2652-60240,Assy.Lower Sup.Left |
| C2642-60261 |
Service Parts - Strip-Mylar |
| C2642-60286 |
Service Parts - Motor Adaptor |
| C2642-69253F |
Service Parts - Order C2642-69253 |
| C2642-60260 |
Service Station - Service station assembly - Does NOT include motor |
| C2642A-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
| C2642-60222 |
Shaft - Lower (Main) carriage shaft - Support for lower half of carriage |
| C2642-60223 |
Shaft - Upper (Secondary) carriage rod - Supports upper half of carriage |
| C2642A-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
| C2642A-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
| C2642A-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
| C2642-60205 |
Spitton - Spittoon assembly - Catches excess ink from cartridges during self cleaning cycles |
| C2642A-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
| C2642-60217 |
Spring - Encoder strip preload spring - Holds tension on encoder strip |
| C2642-60219 |
Spring - Belt pulley spring - Holds tension on carriage belt pulley |
| C2642-60229 |
Spring - Pinch plate spring - Holds tension on pinch plate |
| C2642A-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
| C6822A |
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6823A |
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C4562-60018 |
Storage System - Garage assembly - Holds print cartridge when not in use - Also referred to as a 'cartridge humidor' |
| C2642-60218 |
Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position |
| C2642-60226 |
Support - Right carriage rod support (shaft sleeve) |
| C2652-60240 |
Support - Left support assembly - Includes feed roller motor and gears |
| C2642A-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
| C2642-60258 |
Tray - Input tray assembly - For automatic paper feed (50 sheets) |
| C2642A-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
| C2642A-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
| C2642A-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
| C3281A |
Upgrade Kit - Color upgrade kit - Includes color cartridge, cartridge storage container(garage), and instruction guide - For sale in Europe ONLY |
| C3282A |
Upgrade Kit - Color upgrade kit - Includes color cartridge, cartridge storage container(garage), and instruction guide - For sale in Asia Pacific and Latin America ONLY |
| C2642-60224 |
Washer - Wave washer (spring type washer) |
| C2642A-Window |
Window - Top/front access door assembly - print cartridge access door window. |
| C2113-40006 |
Wiper - Wiper - Cleans ink and debris from print nozzles |
View service parts