HP parts available for C2659A HP DeskJet 850K PrinterC2145-60071 Absorber - Blotter (absorber) assembly - Includes frame and blotter pads
C2145-80021 Absorber - Blotter pad - Cleans the ink cartridge before being capped - Narrow pad for black ink cartridge (one per package)
C2145-80022 Absorber - Blotter pad - Cleans the ink cartridge before being capped wide pad for color ink cartridge (one per package)
C2659A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C2659A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C2145-40044 Actuator - Form feed actuator - Form feed button/arm from front panel
C2145-40045 Actuator - Power button actuater - Power button/arm from front panel
C2145-40046 Actuator - Door actuator - Actuates access door open switch
C2659A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C2145-40059 Adjuster - Eccentric bushing - Used to adjust pen-to-paper spacing (2 used)
C2145-40090 Adjuster - Pivot stop adjuster - Installed near left end of carriage plate
C4555-40043 Adjuster - Z axis service station adjustment (ZASSA)
C2145-40020 Arm - Lever arm - Provides linkage between the pivot assembly and the pressure plate lifter
C4555-40066 Arm - Clutch actuator arm - Used to engage the pivot gears
C2659A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C2659A-Arm_Door Arm Door - Carriage access door sensor arm
C2659A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper
C2659A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter
C2659A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray
C2659A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt
C2145-40027 Base - I/O tray base - Holds the paper, pressure plate, width adjuster and paper catch
C2659-60100 Base - Base assembly - Bottom of printer - Includes rubber feet
C2659A-Battery Battery - Battery pack for hp printer
C2145-40058 Belt - Drive belt - For the print mechanism carriage assembly
C2659A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C2659A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C2145-40048 Bezel - Keypad bezel - Covers the keypad - Attaches to the front right of the top cover
C2659A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2145-00037 Blade - ESD blade for HP DeskJet 870C Series
C2145-40110 Bracket - Top cover bracket - Installed between old style ground plane and top cover
C2659A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)
C2659A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)
C2659A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley
C5876-80002 Brush - Antistatic brush
C2145-60025 Cable - Power cable - Has two 9-pin (F) connectors - 3.4cm (1.3in) long
C2145-60032 Cable - Carriage assembly flex cable - Overall length is 46.7cm (18.4in)
C4555-60061 Cable - Motor cable assembly with ferrite - A 14-pin (F) connector to a 2-pin (F) connector and two 5-pin (F) connectors - Overall length is 39.4cm (15.5in)
C2659A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor
C2659A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C2659A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C2659A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C2659A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C2659A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C2128-40015 Cap - Left lifter cap - Holds the pressure plate lifter in place
C2128-40032 Cap - Center lifter cap - Holds the pressure plate lifter and the kicker spring in place
C2145-40092 Cap - I/O cap - Left side
C2145-40093 Cap - I/O cap - Right side
C2659A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C2145-67851 Carriage - Carriage assembly - Does not include trailing cable
C2659A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C2659A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C2659A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C2659A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C2659A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage
C2659A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C2659A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C2659A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C2659A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
51641A Cartridge - HP 41 Tricolor Ink Cartridge (51641A)
51641AE Cartridge - HP Ink Crtg 41A Color EUR
51645A Cartridge - HP InkJet Crtg 45A Black Large NAM
51645AE Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe)
C2659A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C2145-40047 Clamp - Flex cable clamp
C2145-40084 Clamp - Nose clamp - Holds black cartridge in place
C2145-40085 Clamp - Nose clamp - Holds color cartridge in place
C2145-40101 Clamp - Right pivot clamp (Right Z-STOP) - Holds the right end of the pivot assembly in place
C2145-40117 Clamp - Left pivot clamp (Left Z-STOP) - Holds the left end of the pivot assembly in place
C4531-40009 Clamp - Belt attachment - Anchors drive belt to carriage
C4555-40062 Clamp - Carriage flex clamp - Houses the flex cable Preloader clamp - Holds carriage pre-loader and spring
C4555-40063 Clamp - Chassis clamp - Retains chassis in the base assembly
C2659A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C2659A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.
C2145-00016 Cover - Power supply cover - Shields and protects power supply PC board
C2145-40068 Cover - Side cover - Service station access door
C2659-60103 Cover - Top cover - Does not include carriage access door
C2659A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.
C2659A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C2659A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C2659A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C2659A-Display Display - Status led display (LCD display assembly).
C2145-40040 Door - Access door - Lift-up lid for cartridge/carriage access
C2659A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C2659A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C2659A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C2659A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C2659A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability
C2659A-Encoder Encoder - Encoder spring - provides tension for encoder strip
C2659A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper
C2659A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference
C2659A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C2659A-Extender_Output Extender Output - Paper exit tray extension
C2659A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit
C2659A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly
C2659A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
9170-1627 Ferrite Assembly - Ferrite assembly - Installed on flex cable assembly
C3828A Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C3836A Film - Premium High-Gloss Film - A size (8.5 x 11-inches) - 50 sheets
C3837A Film - Film (Glossy) for DeskJet 1600 Series, OfficeJet 700 Series, DeskJet 895, DeskJet 895 Series
C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C2145-40064 Flag - OOPS flag - Out of paper sensor
C2659A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor
C2128-40063 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (two used)
C2659A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C2659A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons
C2659A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor
C2659A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station
C2659A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station
C2659A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C2659A-Gear_Station Gear Station - Gears on shaft of spittoon station
C2659A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.
C2659A-Glass_Assy Glass Assembly - Main top copier glass assembly.
C2145-00054 Ground - Paper motor ground strap
C4555-00010 Ground - Ground plane - Grounds power supply and logic PCA
C2145-40029 Guide - Width adjuster - For single sheet or envelope feeder
C2145-40032 Guide - Width adjuster - Paper stack width adjuster
C2145-40052 Guide - Lower paper guide
C2145-40118 Guide - Pre-guide (For envelopes)
C5876-40006 Guide - Length adjuster (Blue) - Paper tray extender and paper catch
C2659A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
0905-1409 Hardware - O-ring - Nitrile rubber, 6mm ID, 2mm diameter cross-section, 70 durometer
C2659A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C2659A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.
C4555-60067 Idler - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle
C2659A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C2659A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly
C2145-80014 Insulator - Power supply insulator - Insulates power supply from chassis
C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series
C6050A Iron On Transfers - Iron-On Transfers for OfficeJet K80 Series, OfficeJet 700 Series, OfficeJet T45 Series, OfficeJet T65 Series
C2145-40023 Kicker - Kicker - Restacks the paper in the paper input tray after the top sheet is removed
5183-3031 Kit - ASP (authorized service provider) training kit for DeskJet 800 family printers - Includes service manual CD-ROM and NTSC training video
C2145-40061 Latch - Tray latch - Holds paper tray in place
C2145-40019 Lifter - Pressure plate lifter - Also known as lifter shaft or paper lifter
C4549-40029 Lifter - Separator lifter
C2145-40043 Light Pipe - Light pipe - Transfers light from LED to keypad bezel
C2145-60132 Light Pipe - Light pipe assembly - Transfers light from LED to keypad - Light pipe with power and resume buttons attached
C2145-40022 Link - Separator link (Separator peg)
6040-0800 Lubricant - Special lubricating oil - For carriage slider rod surface - 1 quart bottle (.95 liter)
6040-0911 Lubricant - Special lubricating oil - For carriage slider rod surface - (syringe with 35cc oil)
C2145-60010 Motor - Paper drive motor - Drives paper through printer
C2145-60011 Motor - Carriage motor assembly
C2145-60012 Motor - Service station motor
C2659A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly
C2659A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C2659-80011 NamePlate - Nameplate - C2659A DeskJet 850K printer logo
C2659A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C4531-80071 Packaging - Carriage restraint - Protects bottom of carriage assembly during shipment
C2128-80075 Pad - Foam catch pad - Keeps paper catch from moving inadvertently
C2145-80011 Pad - Blotter pad - Absorbs excess ink and debris
C2145-80027 Pad - Friction cork - Installed under paper width adjuster
51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C3831A Paper - Paper (Glossy) for DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series, DeskJet 660 Series
C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets
C5973A Paper - Premium glossy paper - A size (8.5 x 11-inches) - 25 sheets per package
C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6042A Paper - Paper (Matte) for DeskJet D14XX Series, DeskJet D42XX Series, PhotoSmart 7350 Printer, PhotoSmart 7150 Printer
C6587AN Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art
C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
C2145-67810 PC Board - Power supply assembly
C2659-60102 PC Board - Main logic board - Circuitry to control and drive printer
C2659A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C4555-60072 PC Board - Carriage PCA - Controls movement of carriage assembly - Does not include flex cable
C2659A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C2659A-PC_BRD_Interface PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users.
C2659A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C2145-40069 Pivot - Key pivot - Link between panel actuators and micro switches
C2145-67804 Pivot - Pivot - Large plastic item which contains the pickup rollers
C4555-67849 Plate - Carriage Plate Assembly - Includes Carriage Plate, Upper Paper Guide, Antistatic Brush, Pivot Stop Adjuster, and Z Axis Service Station Adjustment (ZASSA)
8120-6801 Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has 90 degree (F) C13 receptacle (For 240VAC in the United Kingdom, Cyprus, Nigeria, Zimbabwe, and Singapore)
8120-6802 Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India)
8120-6805 Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
8120-6806 Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Denmark)
8120-6807 Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Switzerland)
8120-8381 Power Cord - Power cord (Flint Gray) - 18 AWG, 1.8m (6.0ft) long - Has 90 degree (F) C13 receptacle (For 120VAC in the United States, Canada, Latin America, Korea, Taiwan, and Thailand)
C2659A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
C2659A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C2659A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C2659A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).
C2659A-Power_Supply_BRD Power Supply Board - High voltage power supply board
C2145-40083 Preloader - Carriage pre-loader - Holds the carriage against the carriage rod
C2145-60037 Pressure Assembly - Pressure plate assembly - Lifts paper stack to be printed
C2145-69801 Print Mechanism - Complete mechanism - Includes mechanical carriage movement, paper picking and service station operations
C2659A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C2659A-Pulley Pulley - Paper pick up tray motor pulley.
C2659A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C2145-20019 Retainer - Washer retainer - Holds carriage rod lubrication washers in place
C2145-20007 Rod - Carriage rod - Shaft that the carriage assembly rides on
C2659A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on
C2659A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on
C2124-60116 Roller - Lower pinch roller
C2659A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.
C2659A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C2659A-Sensor_Exit Sensor Exit - Exit media sensor sv
C2659A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor
C2659A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C2659A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.
C2659A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C4555-60086 Separator - Separator assembly
C2659A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6450-60020 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C6450-60021 Service Manual - DeskJet and DeskWriter service manual on CD-ROM - Version 4.1
C2145-67812 Service Station - Service station tumbler assembly
C2145-67850 Service Station - Service station housing assembly
C2659A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4602-67901 Service Station - Service station kit - Includes housing, absorber, pre-filter, cartridge blotter pads, tumbler assembly, tools, and instructions
C2659A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C2659A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C2659A-Speaker Speaker - Speaker assembly - includes speaker cable.
C2145-60323 Spitton - Spittoon assembly - Framework of tumbler assembly
C2659A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2128-00002 Spring - Kicker spring - Provides tension for the kicker
C2128-00006 Spring - Separator spring - Provides pressure between the separator assembly and the center drive roller
C2145-00017 Spring - Lever arm spring - Provides tension between the lever arm and the pressure plate lifter
C2145-00018 Spring - Encoder spring - Provides tension for the encoder strip and grounds the carriage rod to the carriage plate
C2145-00024 Spring - Preloader spring - Provides tension for the preloader bearing arm
C2145-00029 Spring - Paper catch spring - Provides tension for length adjustment
C2145-00031 Spring - Latch spring - Provides tension for tray latch
C2145-00032 Spring - Width spring - Provides friction for paper width adjuster
C2145-00033 Spring - ESD spring - Installed between ESD blade and carriage PC board
C2145-00043 Spring - Clamp spring - Provides tension for the ink cartridge locking clamps
C2145-00044 Spring - Carriage rod spring
C2145-00046 Spring - Pivot spring - Provides tension for the pivot
C2659A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge, for carriage belt tension
C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C2145-00042 Stiffener - Encoder stiffener - Prevents oscillation of encoder strip
C2145-80016 Strip - Encoder strip - Carriage position sensor reference
C2145-40091 Support - I/O deck - Holds wings and single sheet width adjuster
C2145-40151 Support - Chimney wall - Wall support of spittoon
9301-1717 Tool - 35cc syringe - For use with carriage slider rod lubricant
C2659A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C2145-60143 Tray - Paper input/output tray assembly
C2659A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).
C2659A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C2659A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.
C4555-60068 Turnaround Assembly - Turnaround assembly - Holds belt tension components in place
C2145-80026 Washer - Carriage rod lubrication washer (Felt)
C2659A-Window Window - Top/front access door assembly - print cartridge access door window.
C2145-40140 Wing - Left wing - Holds printed paper after being ejected
C2145-40143 Wing - Right wing - Holds printed paper after being ejected