| C2688-67037 |
Absorber - Chimney absorber - Absorbs ink during the cleaning process |
| C2688-67038 |
Absorber - CYM absorber for HP DeskJet 2200 Series |
| C2688-67039 |
Absorber - Spit aerosol absorber - Absorbs ink mist during the cleaning process |
| C2690A-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
| C2690A-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
| C2688-67033 |
Actuator - Ink supply door actuator - Activates the access door sensor |
| C2688-67034 |
Actuator - Top cover actuator - Activates the access door sensor |
| C2690A-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
| C2688-67074 |
Adjuster - Z-Axis service station alignment - Aligns the carriage when positioned in the service station |
| C4530-40258 |
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Left) |
| C4530-40259 |
Adjuster - Carriage shaft adjuster - Adjusts shaft alignment (Right) |
| C2690A-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
| C2690A-Arm_Door |
Arm Door - Carriage access door sensor arm |
| C2690A-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
| C2690A-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
| C2690A-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
| C2690A-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
| C2688-67006 |
Base - Printer base - Covers bottom of the printer |
| C2688-67106 |
Base - Rear PC board cover - Covers the back of the printer |
| C2690A-Battery |
Battery - Battery pack for hp printer |
| C4530-40238 |
Belt - Carriage belt for HP DeskJet 2200 Series |
| C2690A-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
| C2690A-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
| C2690A-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
| C2688-67077 |
Bracket - Ground bracket for HP DeskJet 2200 Series |
| C2688-67082 |
Bracket - EIO bracket for HP DeskJet 2200 Series |
| C2690A-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
| C2690A-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
| C2690A-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2688-67029 |
Cable - Cable assembly - 7-pin (M) connector to 7-pin (F) connector - 5.4cm (2.1in) long |
| C2688-67030 |
Cable - Cable assembly - 2-pin (M) connector to 4-pin (F) connector - 18cm (7in) long |
| C2688-67036 |
Cable - Cable assembly with ferrites - Has many connectors: four 2-pin (F), five 3-pin (F), 3-pin (M), 5-pin (F), 6-pin (F), 7-pin (F), 9-pin (F), 10-pin (F), two 30-pin (F) - Overall length is 1.4m (4.5ft) |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2690A-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
| C2690A-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
| C2690A-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
| C2690A-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
| C2690A-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
| C2690A-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
| C2690A-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
| C2688-67061 |
Carriage - Printhead carriage assembly - Includes carriage, carriage PC board, flex cables, line sensor, and carriage belt |
| C2690A-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
| C2690A-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
| C2690A-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
| C2690A-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
| C2690A-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
| C2690A-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
| C2690A-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
| C2690A-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
| C2690A-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
| C4836AA |
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
| C4836AE |
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
| C4836AL |
Cartridge - No. 11 standard capacity cyan ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
| C4836AN |
Cartridge - HP 11 Standard Capacity Cyan Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
| C4837AA |
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
| C4837AE |
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
| C4837AL |
Cartridge - No. 11 standard capacity magenta ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
| C4837AN |
Cartridge - HP 11 Standard Capacity Magenta Ink Cartridge - 28cc, prints approximately 1750 pages at 5% density per color (USA) |
| C4838AA |
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Asia/Pacific) |
| C4838AE |
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Europe) - |
| C4838AL |
Cartridge - No. 11 standard capacity yellow ink cartridge (holds 28ccs of ink) - Prints approximately1750 pages at 5% density per color (Latin America) |
| C4838AN |
Cartridge - HP 11 Yellow Ink Cartridge - Prints approximately 1750 color graphics pages (North America) |
| C4844A |
Cartridge - HP 10 High Capacity Black Ink Cartridge - 69ml, prints approximately 1400 pages at 5% printing density (USA) |
| C4844AA |
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Asia/Pacific) |
| C4844AE |
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Europe) |
| C4844AL |
Cartridge - No.10 high capacity Black ink cartridge (holds 69ml of ink) - Prints approximately 1400 pages at 5% printing density (Latin America) |
| C2688-67060 |
Chassis - Chassis assembly - Mounts to the base - Main mounting base for the rest of the print mechanism |
| C2690A-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
| C2690A-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
| C2690A-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
| C2688-67002 |
Cover - Right side end cap - Covers the right side of the printer and the ink delivery system |
| C2688-67003 |
Cover - Left side end cap - Covers the left side of the printer |
| C2688-67004 |
Cover - Rear PC board cover - Covers the back of the printer |
| C2688-67007 |
Cover - Carriage access cover - Covers the carriage when parked and the ink supply station |
| C2688-67025 |
Cover - Front panel cover assembly (Dark Gray) - Covers the front center of the printer - Includes buttons, LCD panel cover, access door sensor, and keypanel signal and power harnesses |
| C2688-67026 |
Cover - Keypanel cover - Covers the back side of the keypanel |
| C2688-67076 |
Cover - Power supply cover - Covers part of the power supply board |
| C2688-67079 |
Cover - EIO expansion slot cover |
| C2690A-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
| C2690A-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
| C2690A-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
| C2690A-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
| C2690A-Display |
Display - Status led display (LCD display assembly). |
| C2688-67019 |
Door - Top/front main access door assembly |
| C2690A-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
| C2690A-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
| C2690A-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
| C2690A-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
| C2690A-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
| C2688-67107 |
EIO Assembly - EIO box assembly - Has expansion card slots |
| C2688-67012 |
Ejector - Paper ejector - Ejects printed paper to the output tray |
| C2690A-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
| C2690A-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
| C2690A-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
| C2688-67078 |
Extender - EIO box assembly - Has expansion card slots |
| C2690A-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
| C2690A-Extender_Output |
Extender Output - Paper exit tray extension |
| Q5763-60001 |
Faceplate - Faceplate, Painted |
| C2688-67083 |
Fan - Tubeaxial fan for HP DeskJet 2200 Series |
| C2690A-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
| C2690A-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
| C2690A-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
| C3828A |
Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. |
| C3834A |
Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series |
| C2690A-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
| C2688-67035 |
Foot - Bumper foot - Replacement foot for the bottom of the printer |
| C2690A-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
| C2690A-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
| C2688-67056 |
Gear Assembly - Input gear assembly - Mounts on the left side of the printer - Transfers power to the drive roller |
| C2690A-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
| C2690A-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
| C2690A-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
| C2690A-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
| C2690A-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
| C2690A-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
| C2690A-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
| C2688-67043 |
Guide - Upper/rear paper guide assembly - Includes upper and rear paper guides and the envelope switch |
| C2690A-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
| C2688-67063 |
Hardware - Carriage shaft shim |
| C2690A-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
| C2688-67071 |
Idler - Idler system assembly - Keeps tension on the carriage belt |
| C2690A-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
| C2688-67009 |
Ink Delivery System - Ink Delivery System assembly - Includes ink delivery tubes |
| C2690A-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
| C2688-67010 |
Ink Supply Station - Ink Supply Station assembly - Holds the ink cartridges and pumps ink out to the printheads - Includes the ink supply station motor |
| C2690A-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
| C6049A |
Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series |
| C2688-67027 |
Keypad - Keypad PC board assembly |
| C2688-67008 |
Latch - A-arm latch - Retains purple latch over the printheads on the carriage |
| C2688-67075 |
Lock - Carriage lock - Locks the carriage postion during servicing |
| 1818-8505 |
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
| F1457B |
Memory - 64MB, 100MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
| F1457C |
Memory - 64MB, 133MHz, 3.3v, 144-pin SDRAM SO-DIMM memory module |
| C2688-67042 |
Motor - Service station motor |
| C2688-67045 |
Motor - Paper motor assembly |
| C2688-67070 |
Motor - Carriage drive motor - Includes pulley |
| C2690A-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
| C2690A-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
| C2688-67087 |
NamePlate - Nameplate - DeskJet 2200TN printer logo |
| C2688-67089 |
NamePlate - Nameplate - DeskJet 2200 printer logo |
| C2690A-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
| 51634Y |
Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets |
| 51634Z |
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
| C1812A |
Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes |
| C1820A |
Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets) |
| C1824A |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| C1825A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets |
| C1852A |
Paper - Premium InkJet heavyweight paper - A size (8.5 x 11-inches) - 15 sheets per package |
| C1853A |
Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets |
| C1855A |
Paper - HP Premium Presentation Paper - B size (11 x 17-inches)- 100 sheets |
| C1856A |
Paper - Premium InkJet paper - A3 size (29.7cm x 42.0cm) - 100 sheets |
| C1857A |
Paper - Bright white InkJet paper - B size (11 x 17-inches) - 200 sheets per package |
| C1858A |
Paper - Bright white InkJet paper - A3 size (29.7cm x 42.0cm) - 200 sheets per package |
| C3833A |
Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets |
| C5976B |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets |
| C6039A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6044A |
Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes |
| C6817A |
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
| C6828A |
Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes |
| C6831A |
Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets |
| C6944A |
Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets |
| C6955A |
Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
| C6979A |
Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets |
| C6983A |
Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package |
| C7007A |
Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets |
| C7013A |
Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package |
| C7018A |
Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes |
| C7019A |
Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches) |
| C7020A |
Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets |
| Q6595A |
Paper - HP Premium Presentation Paper - B size (11 x 17-inches)- 100 sheets |
| Q7852A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C2688-67017 |
PC Board - Main logic PC board |
| C2688-67080 |
PC Board - EIO extender board - Has two expansion connectors and plugs into the main logic board |
| C2688-69017 |
PC Board - Main Logic PC board |
| C2690A-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
| C2690A-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
| C2690A-PC_BRD_Interface |
PC Board Interface - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. |
| J3110A |
PC Board Interface - Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board |
| J3111A |
PC Board Interface - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
| J3112A |
PC Board Interface - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J3263G |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
| J3264A |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J4167A |
PC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4169A |
PC Board Interface - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| C2690A-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
| C2688-67044 |
Pivot - Drive Roller and Pivot Assembly - Includes shaft with four rollers, drive gear, and pivot assembly |
| C2688-67058 |
Plate - Side Plate Assembly - Mounts on the left side of the chassis - Secures the Input Gear Assembly |
| C2688-67062 |
Plate - Carriage Plate Assembly - Support for the Carriage and Carriage Drive components |
| 8120-8452 |
Power Cord - Power cord (Black) - 2-wire, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Chile) |
| 8120-8900 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 120V in the United States, Canada, Brazil, Latin America, and Saudi Arabia) Part 8120-8330 is no longer supplied. Please order the replacement, 8120-8900 |
| 8121-0017 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Korea) |
| 8121-0018 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Australia and New Zealand) |
| 8121-0019 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in Argentina) |
| 8121-0020 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 220VAC in South Africa) |
| 8121-0021 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 100VAC in Japan) |
| 8121-0022 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 240V in the United Kingdom) |
| 8121-0023 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in Europe, Asia Pacific, Germany, Spain, France, Netherlands, Switzerland, Italy, and Portugal) |
| 8121-0024 |
Power Cord - Power cord (Flint Gray) - 2-wire, 18 AWG, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (for 220V in China) |
| 8121-0025 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2-conductor, 1.8m (6.0ft) long - Has straight (F) C7 receptacle (For 240VAC in India) |
| C2690A-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
| C2690A-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
| C2690A-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
| C2688-67018 |
Power Supply - Power supply PCA - 100-240VAC, 50/60Hz, 68 watts - For worldwide use |
| C2690A-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
| C2690A-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
| C2688-67109 |
Print Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
| C2690A-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
| C8119-67023 |
Print Mechanism - Replacement print mechanism assembly - Includes printer base , chassis, carriage and paper motors, pivot, carriage, carriage plate, wing assemblies, and main logic harness |
| J3263A |
Print Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J6057A |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| C2688-67001 |
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
| C2688-69001 |
Printer - Replacement DeskJet 2200 printer - Does not include power cord or ink cartridges |
| C4810A |
Printhead - No. 11 black ink printhead |
| C4811A |
Printhead - No. 11 cyan ink printhead |
| C4812A |
Printhead - No. 11 magenta ink printhead |
| C4813A |
Printhead - No. 11 yellow ink printhead |
| C2690A-Pulley |
Pulley - Paper pick up tray motor pulley. |
| 5183-5269 |
Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 3.0 cartridges - Includes box and instructions |
| C2690A-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C2688-67011 |
Retainer - Retainer (Catwalk) - Holds the paper ejector bar |
| C2688-67047 |
Retainer - Retainer ring for drive shaft |
| C4530-00091 |
Retainer - Carriage shaft retainer - Metal spring which holds carriage shaft in place |
| C4530-40288 |
Retainer - Carriage belt retainer |
| C4530-40290 |
Retainer - Encoder retainer (snubber) |
| C2690A-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
| C2690A-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
| C2688-67049 |
Roller - Exit pinch roller - Pinches the media against the drive rollers - Mounts in the upper paper guide |
| C4530-40222 |
Roller - Pinch roller - Pinches the media against the drive rollers - Mounts in the rear paper guide |
| C2690A-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
| C2690A-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
| Q5763-60002 |
Scanner - Scanner - CIS, CMOS, PIC |
| 0515-4576 |
Screw - Screw-mach m3 x 0.5 6.9mm-lg pan-hd |
| C2688-67028 |
Sensor - Access door sensor |
| C2688-67040 |
Sensor - Edge sensor for HP DeskJet 2200 Series |
| C2688-67046 |
Sensor - Media sensor - Senses the presence of media |
| C2688-67055 |
Sensor - Drive roller sensor PC board |
| C2690A-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
| C2690A-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
| C2690A-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
| C2690A-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
| C2688-67057 |
Separator - Separator assembly |
| C2690A-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
| C2690A-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
| 0515-3030 |
Service Parts - Scr-M3x0.5x6mm |
| 5990-4289 |
Service Parts - Gde Inkjet Print Media |
| C2688-67020 |
Service Parts - Foam, I/O Tray Svc |
| C2688-67022 |
Service Parts - Sprt, Rids Tubes Svc |
| C2688-67023 |
Service Parts - Screw, Mach 4-20 Svc |
| C2688-67024 |
Service Parts - Screw, Plastic Svc |
| C2688-67093 |
Service Parts - Screw, Hill 1 Svc |
| C2688-67095 |
Service Parts - Scr.M3x0.5x6mm |
| C2688-67105 |
Service Parts - Cover-Rear Pca New Svc |
| C4530-40020 |
Service Parts - Rear-Wall |
| C4530-40216 |
Service Parts - Clamp-Trailing Cable |
| C4530-40227 |
Service Parts - Latch Handle |
| C4530-40274 |
Service Parts - Shoe-Idler |
| C4530-60051 |
Service Parts - Trailing Cable Short Assy |
| C4530-67813 |
Service Parts - New#c4530-67815 |
| C4530-67815 |
Service Parts - New# C4530-67816 S/A Ink Supply Station |
| C4530-67816 |
Service Parts - Old# C4530-67815 S/A Ink Supply Station |
| C4530-67818 |
Service Parts - Ink Supply Station Svc |
| C8119-67901 |
Service Parts - Ij2230/2280 Svce Mnl |
| C8119-67904 |
Service Parts - Kit Bij 2230/2280 Asp |
| C8119-67907 |
Service Parts - Assy- LCD Label Std English |
| C8119-67908 |
Service Parts - Assy - LCD Label UGFIDA |
| C8119-67909 |
Service Parts - Assy - LCD Label PCHSPT |
| C8119-67910 |
Service Parts - Assy - LCD Label NFSD |
| C8119-67911 |
Service Parts - Assy - LCD Label UGRH |
| C8119-67912 |
Service Parts - Assy - LCD Label UF |
| C8119-67913 |
Service Parts - Assy - LCD Label UFPS |
| C8119-67914 |
Service Parts - Assy - LCD Label ESPFJ SVC |
| C8119-67915 |
Service Parts - Cd Bij2230/2280 S/S Asp |
| C8119-69005 |
Service Parts - Rstrd C8119-67005 |
| Q1660-60008 |
Service Parts - Lid-paint-alloy |
| C2688-67041 |
Service Station - Complete service station assembly - Includes the service station motor and wiper assembly |
| C2690A-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
| C4530-20042 |
Shaft - Carriage shaft - Guides printer carriage |
| C2688-67081 |
Shield - Connector board shield |
| C2690A-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
| C2690A-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
| C2690A-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
| C2690A-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
| C2688-67048 |
Spring - Pinch spring - Attaches between the rear and upper paper guides |
| C2688-67051 |
Spring - Pinch roller spring - Puts tension on the pinch roller |
| C2688-67052 |
Spring - Z-stop spring - Pushes the Z-stop onto the drive shaft |
| C2688-67059 |
Spring - X bias spring for HP Business InkJet 2280 Series |
| C2688-67073 |
Spring - Carriage lock spring |
| C4530-00033 |
Spring - Encoder strip spring |
| C4530-00105 |
Spring - Carriage belt spring |
| C2690A-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
| C6822A |
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6823A |
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C2688-67053 |
Stop - Right Z stop assembly - Secures the right end of the drive shaft in the vertical direction |
| C2688-67054 |
Stop - Left Z stop assembly - Secures the left end of the drive shaft in the vertical direction |
| C4530-80004 |
Strip - Encoder strip - Used to determine carriage position |
| C2690A-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
| C2688-67013 |
Tray - Input tray assembly - Pullout tray with paper length/width stop and fold down door |
| C2688-67014 |
Tray - Output tray assembly |
| C2688-67084 |
Tray - 250-sheet input tray - Tray 2 |
| C2688-69084 |
Tray - 250-sheet input tray - Tray 2 |
| C3398A |
Tray - HP Business InkJet 2200/2250 paper input tray 2 - Holds 250 sheets |
| C2690A-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
| C2690A-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
| C2690A-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
| C5935A |
Upgrade Kit - PCL5/PostScript 2 upgrade kit for HP 2200/2250 - Includes one PostScript 2 / PCL 5C upgrade module with integrated 96MHz processor and 16MB RAM |
| C2690A-Window |
Window - Top/front access door assembly - print cartridge access door window. |
| C2688-67015 |
Wing - Left wing - Holds printed paper after being ejected |
| C2688-67016 |
Wing - Right wing - Holds printed paper after being ejected |
View service parts