HP DesignJet 650c printer model b (C2858B)

MFG Part Number: C2858B

Printer Support Linksshow
- Repair It
- Exchange It
- View Supplies
- Service Diagrams
- Service Manual
- Partsurfer Tool

HP parts list for C2858B HP DesignJet 650c printer model b

C2858-00078 Absorber - Absorber for HP DesignJet 650C series

C2858-60114 Bail - Bail assembly - Has star wheel assemblies attached

1410-0708 Bearing - Sleeve bearing - Used on left end of overdrive assembly

1500-0855 Belt - HP Designjet 600, 650C Motor Belt (Small belt).Y axis drive belt.

C2847-00029 Belt - Carriage belt 24in belt

07575-40125 Bracket - Drive-tensioner bracket for pen carriage drive belt tensioning wedge

C1633-40037 Bracket - Right bail bracket

C1633-40038 Bracket - Left bail bracket for Hewlett Packard Designjet Plotters.

C1633-40064 Bracket - Media sensor mounting bracket

C1633-60029 Bracket - Y-drive assembly bracket

C2847-00051 Bracket - Y-tensioner bracket on left side plate

C2858-00007 Bracket - Encoder spring bracket - Located on the right side of the plotter

C1633-20034 Bushing - Bushing for reduction pulley

C2858-40016 Bushing - Carriage bushing - Supports front of carriage on slider rod /// order carriage unit C2858-60023

C2858-40017 Bushing - Rear slider rod bushing (Spring loaded) - Slides into the rear center of the carriage assembly

C3195-40076 Bushing - Cutter bushing - Connects cutter assembly to slider rod

17255D Cable - RS-232C serial cable - 25-pin (M) to 25-pin (F) - 1.2m (3.9ft) long

24540-80010 Cable - Centronics (parallel) cable - 36-pin (M) to 25-pin (M) - 2.0m (6.6ft) long

5063-1256 Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long

5063-1257 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C2847-60005 Cable - Power supply cable - Has 12-pin (F) connectors - 33cm (13in) long

C2847-60019 Cable - Ribbon cable - 5-pin (F) connector to 5-pin (F) connector - 40.3cm (15.9in) long

C2858-60011 Cable - Cable harness assembly

C2858-60024 Cable - Carriage assembly trailing cable

C2951A Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long

C1633-40052 Cam - Bail lift cam - Activates the bail lift lever (part of the bail lift mechanism kit)

C2858-40043 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C3172-40006 Cap - Spindle end cap - Small core spacer - Removes for loading the media roll. Please order spindle assembly.

C3190-40076 Cap - Cartridge cap - Keeps cartridges from drying out when carriage is parked in service station

C2858-60023 Carriage - Pen carriage assembly - Drafting 'Head' assembly (Holds the four ink cartridges)

1492-0145 Caster - Lockable caster assembly - Includes stem and washer

07575-40013 Clamp - Left belt clamp - Attaches carriage belt to carriage

07575-40014 Clamp - Right belt clamp - Attaches carriage belt to carriage

1400-1021 Clamp - Cable clamp for HP DesignJet 650C Series

9170-1533 Clamp - Clamp - Holds ferrite in place within electronics enclosure

C6247A Cleaner - DesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags

C2847-60087 Control Panel - Control panel assembly - Includes ribbon cable

C1633-00031 Cover - MIO slot access cover

C2847-00010 Cover - Electronic enclosure cover

C2858-40044 Cover - Right end cover - For end of upper stand (Chassis) assembly

C2858-60215 Cover - Left end cover assembly - For end of upper stand (Chassis)

C4705-60084 Cover - Rollfeed access cover - Opens forward to allow access to paper spindle assembly - Includes cover and springs

C3185-00034 Cross Brace - Cross-brace - Brace that connects and supports the two stand legs

C2858-60021 Cutter - Cutter mechanism assembly - Auto cutter for rollfeed paper

C2847-60004 Enclosure - Enclosure (Outer) - Metal structure installed over the inner electronics enclosure

C2847-60018 Enclosure - Enclosure (inner) - Metal structure that forms the base of the electronics enclosure assembly

C2858-60010 Encoder - Linear encoder IC - Detects carriage position as it moves along encoder strip

3160-0814 Fan - Tubeaxial fan (Matsushita FBK-09A12M2-MOD) - 82.5mm (3.25in) mount hole spacing, 25.5mm (1.0in) thick, 12VDC, 35.3CFM

9170-1535 Ferrite Assembly - Split ferrite - Installed inside electronics enclosure

51642A Film - Polyester matte film - 61cm (24in) x 36.6m (120ft) roll

51642C Film - Polyester matte film - B size (11 x 17-inches) - 40 sheets

51642F Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

51642G Film - Polyester Matte Film - D Size - 22 x 34 inches (40 Sheets)

51642H Film - Film (Matte) for DesignJet-C1633A, DesignJet 600, DesignJet 650, DesignJet 200 D size

51642J Film - Polyester matte film - Architectural D size (24 x 36-inches) - 40 sheets

C2858-60162 Firmware - ROM SIMM (Version 5.2) - Plugs into main logic board

C1633-40019 Gear - Overdrive gear cluster

C1633-40027 Gear - Bail engaging lever gear

C1633-40028 Gear - Bail lift cam gear

C4705-60089 Gear Assembly - Clutch / overdrive gear assembly - Includes gear, clutch, retaining clip, and two washers

C4704-40109 Guide - MIO board guide

C1633-40030 Handle - Pinchwheel manual lift handle - Paper loading lever

07575-40012 Hinge - Male half of hinge (on window) - For lift-up window

07575-40111 Hinge - Female half of hinge (on chassis) - For lift-up window

C1633-40094 Holder - Holder - For 'Help' card and hand held cutter

C1633-00033 Housing - MIO support - Metal housing for the plug-in MIO card - Does not include the board guides

C2858-40001 Housing - Service station housing

C4704-60082 Housing - Housing assembly (on left side)

1818-5637 IC ROM - EEPROM (U42) - On main logic board

1818-6089 IC ROM - ROM - (U31)ON main logic board - Revision is 5.11

1818-6090 IC ROM - ROM - (U30)ON main logic board - Revision is 5.11

1818-6091 IC ROM - ROM - (U33)ON main logic board - Revision is 5.11

1818-6092 IC ROM - ROM - (U32)ON main logic board - Revision is 5.11

C1633-00080 Insulator - Power supply insulator (Bottom)

C2847-00019 Insulator - Power supply insulator (Top) - Installed over the power supply

C2847-60061 Kit - Hardware kit - Package of 6 screws for stand assembly

C2858-90169 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (English)

C2858-90170 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Chinese)

C2858-90171 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Thai)

C2858-90172 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (German)

C2858-90173 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (French)

C2858-90174 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Spanish)

C2858-90175 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Italian)

C2858-90176 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Japanese)

C2858-90177 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Portuguese)

C2858-90178 Kit - DesignJet 650C manual kit - Includes 'Using Front Panel', 'Setting Up for Plotting', and 'Quick Reference' guides (Korean)

C3195-00057 Label - Safety label - Provides warning that encoder strip is sharp

C2847-60002 Leg - Leg assembly - Side support with foot bar and two casters

C2847-40013 Lever - Bail engaging lever - Used to move engaging lever gear

C2858-60209 Lifter - Bail lift mechanism kit - Includes cam gear, engaging lever, engaging lever gear, engaging lever spring, Y-tensioner bracket, bail lift cam, cam gear support, screws, and washers

6040-0855 Lubricant - SYNTHETIC OIL (4oz Plastic Bottle) Front and Rear Slider Rods Synthetic oil - One plastic bottle of 3.5oz / 118.29 ML

C6074-60460 Lubricant - Grease - GREASE APPLICATION KITGrease - For helical gear (Drive roller gear)

5182-7317 Maintenance Kit - Maintenance kit

07595-90001 Manual - HP-GL Reference Guide - Programming Information

5959-9733 Manual - Manual for Designjet 820 MFP Series, DesignJet-C1633A, DesignJet 600, DesignJet 650

C2858-90000 Manual - DesignJet 650C service manual (English)

C6072-60281 Manual - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (English)

C6072-60301 Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)

C2847-00005 Media Bin - Media bin back - For top of wire rack below plotter

C2847-00006 Media Bin - Media bin front - Main part of wire rack below plotter

C2847-00012 Media Bin - Media bin adjust - Adjustable media bottom stop in wire rack

C2065A Memory - 4MB, 80nS, 36-bit SIMM memory module - For HP Plotters, LaserJet IIISi, 4/4M, 4Si/MX and other models.

C2066A Memory - 8MB, 80nS, 36-bit SIMM memory module - For HP LaserJet IIISi, 4/4M, 4Si/MX

D3578-69001 Memory - 32MB, 70nS, 36-bit parity SIMM memory module

J2382-69003 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2590-69001 Module - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and three parallel (DB-25) output connectors

J2592-69001 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-61021 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

J4102-69022 Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

C2847-60221 Motor - Motor assembly - Includes power cable

C2848-60003 Motor - Motor/encoder assembly (includes helical drive gear) - 'X' axis drive - NOTE: motor and gear are only sold as a set

C1633-20006 Mount - 'X' axis motor mount

C1633-40089 Mount - Overdrive mount block

C2858-00017 NamePlate - Nameplate - DesignJet 650C printer logo

C4705-60121 Overdrive Assembly - Overdrive assembly (D) - Includes roller, enclosure, bushings

C2858-60026 Overlay - Control panel overlay (English)

C2858-60028 Overlay - Control panel overlay (Spanish)

C2858-60029 Overlay - Control panel overlay (French)

C2858-60030 Overlay - Control panel overlay (Japanese)

C2858-60031 Overlay - Control panel overlay (Italian)

C2858-60033 Overlay - Control panel overlay (Portuguese)

C3195-60113 Packaging - Repackaging Kit - for Main Plotter Unit

51630Y Paper - Color InkJet CX cut sheet paper - A size (8.5 x 11-inches) - 200 sheets per package

51631A Paper - Color InkJet CX cut sheet paper - B size (11 x 17-inches) - 200 sheets per package

51631B Paper - Color InkJet CX cut sheet paper - A3 size (29.7cm x 42.0cm) - 200 sheets per package

51631D Paper - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

51631G Paper - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

51631H Paper - Color InkJet cut sheet paper - A1 size (59.4cm x 84.1cm) - 100 sheets per package

51648D Paper - Heavyweight color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C1860A Paper - HP Bright white InkJet paper - 61cm (24in) x 45.7m (150ft) roll

C3851A Paper - Opaque bond paper - 61cm (24in) x 45.7m (150ft) roll

C3855A Paper - Bright White Inkjet Paper - 61cm (24in) x 45.7m (150ft) roll

C3889A Paper - Color InkJet paper - 61cm (24in) x 45.7m (150ft) roll

0950-2417 PC Board - Power supply board

C2858-60105M PC Board - Interconnect board

C2858-69207 PC Board - Main logic board, HP OEM DesignJet MAIN LOGIC PCA BOARD FOR 650C

J2550-69013 PC Board - EtherTwist 10Base-T LAN interface board

J2555-69013 PC Board - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J4100-69001 PC Board - JetDirect 400N modular input/output (MIO) internal print server - Provides 10/100Base-TX or 10Base-2 network connection using RJ45 or BNC connectors

J2550B PC Board Interface - EtherTwist (10Base-T) LAN interface board, JetDirect card has one 10 Mbps RJ45 Ethernet connector.

J2552B PC Board Interface - LAN and LocalTalk interface - Has EtherTwist (10Base-T) , ThinLAN (10Base-2) , and LocalTalk (DIN-8) connectors

J2555B PC Board Interface - JetDirect Card Token RingToken ring LAN interface board - DB-9 and RJ-45 connectors

J2590A PC Board Interface - External JetDirect LAN interface module with RJ-45 connector for EtherTwist (10Base-T) or 100VG/802.12 input and 3 parallel (DB-25) output connectors

J2591-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2591A PC Board Interface - External JetDirect LAN interface module and power module - Has EtherTwist (10Base-T) and ThinLAN (10Base-2) connectors

J2594-69001 PC Board Interface - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors

J3258-61041 PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3258B PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN

J3264A PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45) LAN

J3265-69001 PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors

J3265G PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN

J4101B PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network

J4102B PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector

5960-8286 Pin - Shipping Material/Carton for DesignJet 200 D size, DesignJet 650, DesignJet 200 E size

C1633-00009 Plate - Axial Bias Plate - Installed between the paper drive (Platen) Roller Assembly and the right frame

C2847-00027 Plate - SIMM Plate - Covers access to SIMM slot connectors

C2847-00041 Platen - Entry platen - Installed over the paper drive (platen) roller assembly

C3545-60001 PostScript - Adobe's PostScript (level two) SIMM module

8120-4211 Power Cord - Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in South Africa and India)

0957-2340 Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories.

0957-2481 Power Module - Pwra brk uni 12vdc 15w

0950-2623 Power Supply - Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V, 24V) - 158 watts - Includes upgrade sticker

C2858-60003 Primer - Primer assembly - Mounts under the service station assembly on the left side of the plotter

07570-60105 Pulley - Idler pulley - For main drive belt

07570-60112 Pulley - Idler drive pulley - Applies tension to the pen carriage drive belt (small belt)

C3170-60009 Pulley - Reduction pulley - Includes 2 Bearings Shaft (0.16in Diameter on Both Ends) Flange Pulley and Instructions

C1633-60020 Receptacle - AC power recptacle assembly - Includes receptacle, wires, grounding lug, and socket to power supply

5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series

5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions

C2858B-Repair_DesignJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.

C2858-40038 Reservoir - Reservoir - Attaches to left side chassis - Ink absorber is inserted into this reservoir

C2858-40039 Reservoir - Ink drop reservoir - Installs on right side of plotter

C4699-60042 Roller - Paper drive (platen) roller assembly - Long gear driven roller - Includes roller and mark encoder

C4704-60199 Rollfeed Assembly - Brake/housing assembly (on right side) - Accepts the flange end of the spindle rod assembly - Includes the 2 housing pieces, 2 brake shoes, brake gear, brake lever, and springs

C2847-60021 Sensor - Media sensor assembly - Includes cable

C2847-60022 Sensor - Pincharm sensor - Includes cable

C2847-60069 Sensor - Sensor assembly

C2858-60007 Sensor - Optical primer sensor

C3180-60034 Sensor - Pincharm sensor - Includes cable

C2858B-Manual_DesignJet Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.

C7769-90066 Service Manual - DesignJet support DVD-ROM - Version A.04.01 - Has product information, user's manuals, service manuals, diagnostic software, test drawings, newsletters, and service notes

C2858-60152 Service Station - Service station kit - Includes service station cap, four primer tubes, absorber, sled, wiper, drop detect sensor, and bail sensor cable

C6072-60284 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (German)

C6072-60285 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (French)

C6072-60286 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60287 Software - Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy disks (Italian)

C6072-60304 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)

C6072-60305 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)

C6072-60306 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)

C6072-60307 Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)

C2847-60093 Spindle - Rollfeed spindle rod assembly (D-size 24 inch ) - Includes spindle and end caps

C3172A Spindle - D/A1 rollfeed spindle rod assembly for DesignJet 6xx/7xx - Includes spindle and end caps

1460-2061 Spring - Extension spring - Zinc plated music wire, 0.875in long, 0.187in OD, 0.020in wire diameter, 1.8 in/lb rate - For pen carriage drive belt pulley tensioning wedge

C1633-80006 Spring - Bail engaging lever spring

C1633-80014 Spring - Compression spring - For the rear bushing on the carriage

C2858-00006 Spring - Encoder spring for HP DesignJet 650C Series

C4723-80027 Spring - Cutter shim/bail spring

C4713-60035 Starwheel - Starwheel mount assembly - Includes cover, body, spring and two starwheels

C4713-60098 Strip - Encoder strip assembly (D-size) - Includes encoder strip and encoder strip spring

C2847-60044 Switch - Power switch assembly - Includes cable

07550-40104 Wedge - Tensioning wedge (cam tensioner) - For the pen carriage drive belt pulley

C2847-40003 Window - Lift-up viewing window

DesignJet 650c printer model b parts list