HP printer parts available for
C4110A HP LaserJet 5000 Printer
|
| C2809A |
Adapter - Serial cable adapter - 9-pin (M) to 25-pin (F) -
C2809A |
| RB1-6134-040CN |
Arm - Tray 1 sensor arm -
RB1-6134-040CN |
| RB2-1781-000CN |
Arm - Multi purpose tray paper sensor lever -
RB2-1781-000CN |
| RB2-1782-000CN |
Arm - Lower tray paper sensor lever -
RB2-1782-000CN |
| RB2-1856-000CN |
Arm - Toner cartridge engagemnet arm -
RB2-1856-000CN |
| RB2-1856-040CN |
Arm - Toner cartridge engagemnet arm -
RB2-1856-040CN |
| RF5-2635-000CN |
Arm - Paper arm for HP LaserJet 5000 Series -
RF5-2635-000CN |
| RB2-1887-000CN |
Belt - Large feed belt - Wide belt in middle of assembly -
RB2-1887-000CN |
| RB2-1888-000CN |
Belt - Small paper feed belt - One on each side of wide belt -
RB2-1888-000CN |
| RG5-3526-020CN |
Belt - Paper feed belt assembly -
RG5-3526-020CN |
| RB2-1991-020CN |
Block - Right latch block - Housing for right side tray latch -
RB2-1991-020CN |
| RB2-1992-020CN |
Block - Left latch block - Housing for left side tray latch -
RB2-1992-020CN |
| RB2-1906-000CN |
Brush - Cleaning brush for HP LaserJet 5000 Series -
RB2-1906-000CN |
| RB2-1981-000CN |
Brush - Static brush - Dissipates static charge from paper output -
RB2-1981-000CN |
| RB1-6149-000CN |
Bushing - Left pickup roller bushing -
RB1-6149-000CN |
| RB1-6177-000CN |
Bushing - Tray 1 and 2 pickup shaft bushing - Right side -
RB1-6177-000CN |
| RB1-6179-000CN |
Bushing - Tray 1 and 2 pickup shaft bushing - Right side -
RB1-6179-000CN |
| RB2-1804-000CN |
Bushing - Right pickup roller bushing -
RB2-1804-000CN |
| RB2-1903-000CN |
Bushing - Right side transfer roller bushing -
RB2-1903-000CN |
| RB2-1904-000CN |
Bushing - Left side transfer roller bushing -
RB2-1904-000CN |
| RB2-1986-000CN |
Bushing - Right side bushing - Delivery roller shaft support -
RB2-1986-000CN |
| RB2-1987-000CN |
Bushing - Left side bushing - Delivery roller shaft support -
RB2-1987-000CN |
| RB2-1988-000CN |
Bushing - Right side bushing for lower delivery roller -
RB2-1988-000CN |
| RB2-1988-020CN |
Bushing - Right side bushing for lower delivery roller -
RB2-1988-020CN |
| RB2-1989-000CN |
Bushing - Left side bushing for lower delivery roller -
RB2-1989-000CN |
| RS5-1392-000CN |
Bushing - Tray 1 and 2 left side pickup roller shaft bushing -
RS5-1392-000CN |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long -
5063-1256 |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long -
5063-1257 |
| 92215N |
Cable - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors -
92215N |
| 92215S |
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long -
92215S |
| C2932A |
Cable - RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long -
C2932A |
| C2933A |
Cable - RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long -
C2933A |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long -
C2950A |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long -
C2951A |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long -
C2990A |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long -
C2991A |
| RG5-3523-000CN |
Cable - Cable assembly for HP LaserJet 5000 Series -
RG5-3523-000CN |
| RG5-3554-000CN |
Cable - Face down bin full cable -
RG5-3554-000CN |
| RG5-3557-000CN |
Cable - Cable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector -
RG5-3557-000CN |
| RG5-3558-000CN |
Cable - Top of page sensor cable -
RG5-3558-000CN |
| RG5-3561-000CN |
Cable - HP Cable for LaserJets, fuser cable. -
RG5-3561-000CN |
| RG5-3562-000CN |
Cable - Cable assembly - A 22-pin (F) connector to many cables: 32.4cm (12.8in) with 8-pin (F) connector, 34.9cm (13.8in) with 7-pin (F) connector, 40.3cm (15.9in) with 4-pin (F) connector, and 66.4cm (26.1in) with 3-pin (F) connector -
RG5-3562-000CN |
| RG5-4213-000CN |
Cable - Cable assembly with ferrite - A large 14-pin (F) connector to a small 11-pin (F) connector - 10.0cm 3.9in long (please purchase C4115A). -
RG5-4213-000CN |
| RG5-7073-000CN |
Cable - Cable assembly - A 20-pin (F) connector to two 14cm (5.5in) cables with 7-pin (F) connectors, a 31.5cm (12.4in) cable with a 9-pin (F) connector, and a 39.4cm (15.5in) cable with a 3-pin (F) connector -
RG5-7073-000CN |
| RH2-5337-000CN |
Cable - Ribbon cable - Has two 40-pin (M) edge connectors - 1.4cm (0.6in) long -
RH2-5337-000CN |
| RH2-5338-000CN |
Cable - Ribbon cable - From paper PCA to controller PCA -
RH2-5338-000CN |
| RB2-1796-000CN |
Cam - Left side tray 1 pickup roller shaft cam -
RB2-1796-000CN |
| RB2-1797-000CN |
Cam - Right side tray 1 pickup roller shaft cam -
RB2-1797-000CN |
| RB2-1802-000CN |
Cam - Roller cam - Left side pickup roller cam -
RB2-1802-000CN |
| RB2-1805-000CN |
Cam - Roller cam - Right side pickup roller cam -
RB2-1805-000CN |
| 5184-5224 |
Cartridge - Black toner cartridge - With 'Ultra-Precise' toner - Has maximum capacity toner (Prints approximately 10,000 pages) -
5184-5224 |
| 6R925 |
Cartridge - 29x hi yield black toner -
6R925 |
| C4129X |
Cartridge - Black toner cartridge - With 'Ultra-Precise' toner - Has maximum capacity toner (Prints approximately 10, 000 pages) -
C4129X |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills -
5090-3379 |
| RH7-5191-000CN |
Clutch - Paper feed clutch -
RH7-5191-000CN |
| RH7-5192-000CN |
Clutch - Registration clutch - Engages registration roller -
RH7-5192-000CN |
| RH7-5192-020CN |
Clutch - Registration clutch - Engages registration roller -
RH7-5192-020CN |
| RB2-1803-000CN |
Collar - Right pickup roller collar - Houses shaft bushing -
RB2-1803-000CN |
| RB2-1815-000CN |
Collar - Left pickup roller collar - Houses shaft bushing -
RB2-1815-000CN |
| WS6-5092-000CN |
Connector - Power connector - Supplies power to optional paper trays -
WS6-5092-000CN |
| RG5-5438-030CN |
Control_Panel - Control panel - Does not include overlay -
RG5-5438-030CN |
| RB2-3314-000CN |
Coupler - Pickup roller coupler -
RB2-3314-000CN |
| 5021-0349 |
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA -
5021-0349 |
| RB2-1747-030CN |
Cover - Face down auxiliary cover -
RB2-1747-030CN |
| RB2-1748-000CN |
Cover - Top cover - Rear portion of the top cover -
RB2-1748-000CN |
| RB2-1749-040CN |
Cover - Right side cover assembly -
RB2-1749-040CN |
| RB2-1755-020CN |
Cover - Right corner cover - - Located below the front drop down tray -
RB2-1755-020CN |
| RB2-1756-020CN |
Cover - Left corner cover - Located below the front drop door tray -
RB2-1756-020CN |
| RB2-1758-000CN |
Cover - Display cover - Control panel display cover -
RB2-1758-000CN |
| RB2-1905-000CN |
Cover - Transfer roller bushing cover - Right side -
RB2-1905-000CN |
| RB2-2037-000CN |
Cover - Tray cover - 250 sheet paper tray cover -
RB2-2037-000CN |
| RB2-3247-000CN |
Cover - Paper tray top cover -
RB2-3247-000CN |
| RB2-3262-000CN |
Cover - Return cover - Access to paper pickup roller -
RB2-3262-000CN |
| RB3-0404-000CN |
Cover - Return cover - Access to paper pickup roller -
RB3-0404-000CN |
| RB3-0426-000CN |
Cover - Inner cover - Tray size sensor cover -
RB3-0426-000CN |
| RB3-0435-000CN |
Cover - Front cover - Top front cover beteern the frame sides -
RB3-0435-000CN |
| RB3-0436-000CN |
Cover - Right auxiliary cover - Top of the right side frame -
RB3-0436-000CN |
| RB3-0437-000CN |
Cover - Left auxiliary cover - Top of the left side cover -
RB3-0437-000CN |
| RB3-0438-000CN |
Cover - Right cover - Right front frame cover -
RB3-0438-000CN |
| RB3-0439-000CN |
Cover - Left cover - Left front frame cover -
RB3-0439-000CN |
| RB3-0441-000CN |
Cover - Tray cover - Rear tray cover for 500 sheet universal paper tray -
RB3-0441-000CN |
| RG5-3547-080CN |
Cover - Front inner cover assembly - With tray 1 sensor arm, arm spring and tray 1 leaf spring -
RG5-3547-080CN |
| RG5-3549-000CN |
Cover - Front cover assembly - Drop down paper tray assembly -
RG5-3549-000CN |
| RG5-3550-040CN |
Cover - Left side cover assembly -
RG5-3550-040CN |
| RG5-3551-100CN |
Cover - Rear cover assembly -
RG5-3551-100CN |
| RB2-1978-000CN |
Deflector - Deflection pawl - Diverts paper output to rear tray or top -
RB2-1978-000CN |
| RG5-3556-000CN |
Door - Toner cartridge access door assembly -
RG5-3556-000CN |
| RG5-3556-040CN |
Door - Toner cartridge access door assembly -
RG5-3556-040CN |
| RG5-3544-000CN |
Drive_Assembly - Paper pickup drive assembly -
RG5-3544-000CN |
| RG5-4183-050CN |
Drive_Assembly - Gear drive assembly for 500-sheet paper pickup -
RG5-4183-050CN |
| RG5-4183-110CN |
Drive_Assembly - Gear drive assembly for 500-sheet paper pickup -
RG5-4183-110CN |
| C4113-69001 |
Duplexer - Duplexer assembly -
C4113-69001 |
| C4113A |
Duplexer - Duplexer assembly - For two sided printing -
C4113A |
| RB2-2020-000CN |
Extension - Tray extension - Paper length adjustment extension -
RB2-2020-000CN |
| RH7-1354-000CN |
Fan - Cooling Fan - Lower Right Rear -
RH7-1354-000CN |
| RH7-1430-000CN |
Fan - Fan for LaserJets -
RH7-1430-000CN |
| RH7-1431-000CN |
Fan - Tubeaxial fan for HP LaserJet 5000 Series -
RH7-1431-000CN |
| C4114A |
Feeder - 250-sheet paper feeder assembly (complete assembly) - Includes the base unit plus the paper cassette tray assembly -
C4114A |
| C4115A |
Feeder - 500 sheet feeder and paper tray - Printer sits on top of this unit - Includes 500 sheet paper cassette -
C4115A |
| Q1865-69001 |
Feeder - 250-sheet paper feeder assembly (complete assembly) - Includes the base unit plus the paper cassette tray assembly -
Q1865-69001 |
| Q1865A |
Feeder - 250-sheet paper feeder assembly (complete assembly) - Includes the base unit plus the paper cassette tray assembly -
Q1865A |
| Q1866-69001 |
Feeder - 500-sheet feeder and paper tray - Printer sits on top of this unit - Includes 500-sheet paper cassette -
Q1866-69001 |
| Q1866A |
Feeder - 500-sheet feeder and paper tray - Printer sits on top of this unit - Includes 500-sheet paper cassette -
Q1866A |
| RG5-3522-050CN |
Feeder - Paper Feed Roller Assembly -
RG5-3522-050CN |
| RG5-4211-000CN |
Feeder - Feeder controller PCA assembly -
RG5-4211-000CN |
| C4286A |
Flash_Card - 2MB flash DIMM memory - Font storage device -
C4286A |
| C4287A |
Flash_Card - 4MB flash DIMM memory - Font storage device -
C4287A |
| RG5-4180-000CN |
Frame - Left frame assembly -
RG5-4180-000CN |
| C4110-67931 |
Fuser_Assembly - Fuser Assembly kit - Includes Fuser Assembly, tools and instructions -
C4110-67931 |
| C4110-69018 |
Fuser_Assembly - Fuser Assembly - 110 volts -
C4110-69018 |
| C4110-69019 |
Fuser_Assembly - Fuser Assembly - 220 volts -
C4110-69019 |
| C4110-69031 |
Fuser_Assembly - Fuser Assembly kit - Includes Fuser Assembly, tools and instructions -
C4110-69031 |
| C5627A |
Fuser_Assembly - Fuser Assembly (For 100V to 127V operation) - Bonds the toner to the paper with heat - Includes fuser cleaning roller (User Installable) -
C5627A |
| RG5-5455-000CN |
Fuser_Assembly - Fuser Assembly - 110 Volts -
RG5-5455-000CN |
| RG5-5455-100CN |
Fuser_Assembly - Fuser Assembly - 110 volts -
RG5-5455-100CN |
| RG5-5456-100CN |
Fuser_Assembly - Fuser Assembly - 220 volts -
RG5-5456-100CN |
| RB1-6130-000CN |
Gear - Tray 1 pickup roller gear -
RB1-6130-000CN |
| RG5-3543-000CN |
Gear - Main gear assembly -
RG5-3543-000CN |
| RS5-0695-000CN |
Gear - Tray 2 pickup roller shaft drive gear -
RS5-0695-000CN |
| RS6-0351-000CN |
Gear - Paper feed gear -
RS6-0351-000CN |
| RS6-0352-000CN |
Gear - Paper feed gear -
RS6-0352-000CN |
| RS6-0357-000CN |
Gear - Delivery roller shaft gear -
RS6-0357-000CN |
| C4110-90035 |
Guide - Installation guide - Instruction sheet for installing the user guide CD-ROM on a computer -
C4110-90035 |
| RB2-1774-000CN |
Guide - Toner cartridge guide - Left side -
RB2-1774-000CN |
| RB2-1775-000CN |
Guide - Toner cartridge guide - Right side -
RB2-1775-000CN |
| RB2-1780-000CN |
Guide - Paper guide - Guides paper from pickup roller to feed roller -
RB2-1780-000CN |
| RB2-1970-030CN |
Guide - Rear paper guide - Deflects paper to output tray -
RB2-1970-030CN |
| RF5-2415-000CN |
Guide - Delivery guide - Guides paper coming out of delivery roller -
RF5-2415-000CN |
| RG5-3520-000CN |
Guide - Paper guide - Tray 1 paper guide plate assembly -
RG5-3520-000CN |
| RG5-3525-000CN |
Guide - Transfer guide assembly - Guides paper into transfer roller -
RG5-3525-000CN |
| RG5-3542-090CN |
Guide - Upper delivery roller assembly - Paper output roller assembly - Includes right and left roller bushings, anti-static brush and delivery guide -
RG5-3542-090CN |
| RG5-3548-060CN |
Guide - Transfer guide assembly - Includes the width adjuster for the drop down tray -
RG5-3548-060CN |
| RG5-6197-000CN |
Guide - Paper guide - Tray 1 paper guide plate assembly -
RG5-6197-000CN |
| C2985-60008 |
Hard_Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage -
C2985-60008 |
| C2985-61021 |
Hard_Drive - 20GB EIO hard drive - LaserJet EIO font/print job storage -
C2985-61021 |
| C2985-61031 |
Hard_Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage -
C2985-61031 |
| C2985-69031 |
Hard_Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage -
C2985-69031 |
| RB2-1997-000CN |
Holder - Roller holder - Face down guide roller holder -
RB2-1997-000CN |
| RB1-2190-000CN |
Hook - Pickup roller spring hook -
RB1-2190-000CN |
| C4110-69008 |
Laser_Scanner - Laser/Scanner Assembly -
C4110-69008 |
| C4110-69016 |
Laser_Scanner - Laser/scanner assembly -
C4110-69016 |
| RG5-3603-000CN |
Laser_Scanner - Laser/Scanner Assembly -
RG5-3603-000CN |
| RG5-4811-000CN |
Laser_Scanner - Laser/scanner assembly -
RG5-4811-000CN |
| C4110A |
LaserJet - HP LaserJet 5000 Printer -
C4110A |
| RB2-1975-020CN |
Latch - Tray latch - For right side, rear face up -
RB2-1975-020CN |
| RB2-1976-020CN |
Latch - Left side rear face up tray latch -
RB2-1976-020CN |
| RB2-1738-000CN |
Lever - Shutter lever - Connects to laser shutter -
RB2-1738-000CN |
| RB2-1791-000CN |
Lever - Sensor lever - Tray 2 paper out sensor -
RB2-1791-000CN |
| RB2-1807-000CN |
Lever - Sensor flag lever - Paper feed sensor arm -
RB2-1807-000CN |
| RB2-1980-000CN |
Lever - Bin full lever - Face down output tray sensor lever -
RB2-1980-000CN |
| RF5-2421-000CN |
Lever - Shutter lever - Connects to laser shutter -
RF5-2421-000CN |
| RB2-2042-000CN |
Lock - Extension lock - Paper length extension lock -
RB2-2042-000CN |
| C4110-67923 |
Maintenance_Kit - Maintenance kit (120V) - Includes fuser assembly, separation rollers, transfer roller, feed rollers, pickup roller, and instruction guide -
C4110-67923 |
| C4110-67924 |
Maintenance_Kit - Maintenance kit (240V) - Includes Fuser Assembly, separation pad, transfer roller and instruction manual -
C4110-67924 |
| C4110-67927 |
Maintenance_Kit - LaserJet 5000 series Maintenance kit (120V) - Includes fuser assembly, separation rollers, transfer roller, feed rollers, pickup roller, and instruction guide -
C4110-67927 |
| C4110-67928 |
Maintenance_Kit - Maintenance kit - For 240 VAC - Includes Fuser Assembly, separation pad, and transfer roller -
C4110-67928 |
| C4110-69006 |
Maintenance_Kit - Maintenance Kit (120V) - Includes Fuser Assembly, Seperation -
C4110-69006 |
| C4110-69027 |
Maintenance_Kit - Maintenance kit (120V) - Includes fuser assembly, separation rollers, transfer roller, feed rollers, pickup roller, and instruction guide -
C4110-69027 |
| C4110-69028 |
Maintenance_Kit - Maintenance kit (240V) - Includes Fuser Assembly, separation pad, transfer roller and instruction manual -
C4110-69028 |
| C4110-69035 |
Maintenance_Kit - Maintenance kit (120V) - Includes fuser assembly, separation rollers, transfer roller, feed rollers, pickup roller, and instruction guide -
C4110-69035 |
| C4110-69036 |
Maintenance_Kit - Maintenance kit (240V) - Includes Fuser Assembly, separation pad, transfer roller and instruction manual -
C4110-69036 |
| 5851-1890 |
Manual - Manual for LaserJet 5000 Series, LaserJet 4100 Series, LaserJet 33x0 MFP Seriess, LaserJet 1000 Series -
5851-1890 |
| 5851-1891 |
Manual - LaserJet quick reference service guide (monochrome) - Volume IV -
5851-1891 |
| C4110-60117 |
Manual - Manual/Software for LaserJet 5000 Series -
C4110-60117 |
| C4110-91041 |
Manual - Send RFQ below for updated Price and Description -
C4110-91041 |
| C4110-99028 |
Manual - Manual Kit for LaserJet 5000 Series -
C4110-99028 |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) -
C6072-60301 |
| C4135-67901 |
Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4135-67901 |
| C4135A |
Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4135A |
| C4136-67901 |
Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4136-67901 |
| C4136A |
Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4136A |
| C4137-67901 |
Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4137-67901 |
| C4137A |
Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module -
C4137A |
| C4140A |
Memory - 4MB, 100-pin SDRAM DIMM memory module -
C4140A |
| C4292A |
Memory - 8MB Traditional Chinese MROM DIMM - For LaserJet printers -
C4292A |
| C4293A |
Memory - 8MB simplified Chinese MROM DIMM - For LaserJet printers -
C4293A |
| C7842-67901 |
Memory - 8MB, 100-pin SDRAM DIMM memory module -
C7842-67901 |
| C7842A |
Memory - 4MB, 100-pin SDRAM DIMM memory module -
C7842A |
| C7842AX |
Memory - 8MB, 100MHz SDRAM DIMM memory module -
C7842AX |
| C7843-67901 |
Memory - 16MB, 100-pin SDRAM DIMM memory module -
C7843-67901 |
| C7843A |
Memory - 16MB, 100-pin SDRAM DIMM memory module -
C7843A |
| C7845-67901 |
Memory - 32MB, 100-pin SDRAM DIMM memory module -
C7845-67901 |
| C7845A |
Memory - 32MB, 100-pin SDRAM DIMM memory module -
C7845A |
| Q7707-67951 |
Memory - 32MB, 100-pin SDRAM DIMM memory module -
Q7707-67951 |
| Q7707AX |
Memory - 32MB, 100-pin SDRAM DIMM memory module -
Q7707AX |
| RH7-1357-000CN |
Motor - Main motor for HP LaserJet 5000 Series -
RH7-1357-000CN |
| RH7-1432-000CN |
Motor - Main motor for HP LaserJet 5000 Series -
RH7-1432-000CN |
| RB2-1790-000CN |
Mount - Sensor mount for HP LaserJet 5000 Series -
RB2-1790-000CN |
| RB3-0425-000CN |
Mount - Right mount for HP LaserJet 5000 Series -
RB3-0425-000CN |
| RB2-2023-000CN |
Other_Parts - Paper stop (Blue plastic) - Paper length adjustment stop plate -
RB2-2023-000CN |
| C4110-40004 |
Overlay - LaserJet 5100 control panel overlay (English) -
C4110-40004 |
| RF5-2399-000CN |
Pad - Paper separation pad and arm -
RF5-2399-000CN |
| RF5-2400-000CN |
Pad - Separation pad assy. tray 1 -
RF5-2400-000CN |
| RF5-3439-000CN |
Pad - Tray 1 separation pad - Does not include pressure spring or separation pad holder -
RF5-3439-000CN |
| RF5-4117-000CN |
Pad - Pad assembly for HP LaserJet 5000 Series -
RF5-4117-000CN |
| RG9-1485-000CN |
Pad - Tray 2 separation pad with spring -
RG9-1485-000CN |
| C3974-67901 |
PC_Board - Formatter board assembly -
C3974-67901 |
| C3974-69001 |
PC_Board - Formatter board assembly -
C3974-69001 |
| C4110-67906 |
PC_Board - DC controller board with ribbon cable -
C4110-67906 |
| C4110-69001 |
PC_Board - DC controller board with ribbon cable -
C4110-69001 |
| C4110-69022 |
PC_Board - Formatter kit - Formatter PCA with tools and instructions -
C4110-69022 |
| RG5-3560-000CN |
PC_Board - Paper handling PCA -
RG5-3560-000CN |
| RG5-4212-000CN |
PC_Board - Sensor PCA - Tray size sensor PCA - Has four micro switchs acuated by the tray size sensor leaf spring -
RG5-4212-000CN |
| RG5-4212-020CN |
PC_Board - Sensor PCA - Tray size sensor PCA - Has four micro switchs acuated by the tray size sensor leaf spring -
RG5-4212-020CN |
| RB2-1745-000CN |
Pin - Front cover pin - Hinge pins for drop down front cover -
RB2-1745-000CN |
| RB1-6141-000CN |
Plate - Grounding plate -
RB1-6141-000CN |
| RB2-1734-000CN |
Plate - Grounding plate -
RB2-1734-000CN |
| RB2-1735-000CN |
Plate - Grounding plate -
RB2-1735-000CN |
| RB2-1736-000CN |
Plate - Grounding plate -
RB2-1736-000CN |
| RB2-1737-000CN |
Plate - Grounding plate -
RB2-1737-000CN |
| RB2-1740-000CN |
Plate - Fan grounding plate and fan housing -
RB2-1740-000CN |
| RB2-1740-020CN |
Plate - Fan grounding plate and fan housing -
RB2-1740-020CN |
| RB2-1990-000CN |
Plate - Grounding plate -
RB2-1990-000CN |
| RG5-7074-000CN |
Plate - Grounding plate -
RG5-7074-000CN |
| 8120-6802 |
Power_Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India) -
8120-6802 |
| 8120-6805 |
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) -
8120-6805 |
| C4110-67917 |
Power_Supply - Power supply assembly with ribbon cable - 100-120VAC input -
C4110-67917 |
| C4110-67918 |
Power_Supply - Power supply assembly with ribbon cable - 220/240VAC input -
C4110-67918 |
| C4214-69022 |
Power_Supply - Power supply assembly - 100-120VAC -
C4214-69022 |
| C4214-69023 |
Power_Supply - Power supply assembly - 220-240VAC -
C4214-69023 |
| RH3-2224-000CN |
Power_Supply - Power supply assembly - 100-120VAC -
RH3-2224-000CN |
| RH3-2225-000CN |
Power_Supply - Power supply assembly - 220-240VAC -
RH3-2225-000CN |
| J3110A |
Print_Server - Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board -
J3110A |
| J3111-61001 |
Print_Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector -
J3111-61001 |
| J3111-69001 |
Print_Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector -
J3111-69001 |
| J3111A |
Print_Server - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA -
J3111A |
| J3112-69001 |
Print_Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector -
J3112-69001 |
| J3112A |
Print_Server - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors -
J3112A |
| J3113A |
Print_Server - JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot -
J3113A |
| J4135-61001 |
Print_Server - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port -
J4135-61001 |
| J4135A |
Print_Server - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers -
J4135A |
| J4167-69001 |
Print_Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector -
J4167-69001 |
| J4167A |
Print_Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors -
J4167A |
| J4169-69001 |
Print_Server - JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector -
J4169-69001 |
| J4169A |
Print_Server - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector. -
J4169A |
| J6057-69001 |
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J6057-69001 |
| J6057-69011 |
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J6057-69011 |
| J6057A |
Print_Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector -
J6057A |
| J6057AR |
Print_Server - Interface (Product) for Digital Sender 9100C, DeskJet 2200 Series, LaserJet 4000 Series, Color LaserJet 8500 Series -
J6057AR |
| J7934-61001 |
Print_Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J7934-61001 |
| J7934-61011 |
Print_Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J7934-61011 |
| J7934-69001 |
Print_Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J7934-69001 |
| J7934-69011 |
Print_Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J7934-69011 |
| J7934A |
Print_Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. -
J7934A |
| J7934G |
Print_Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector -
J7934G |
| RB1-6195-000CN |
Pulley - Paper feed pulley - Idler pulley for small belts -
RB1-6195-000CN |
| RF5-2397-000CN |
Rail - Tray 2 left rail - Left side tray support -
RF5-2397-000CN |
| RF5-2398-030CN |
Rail - Tray 2 right rail - Right side tray support -
RF5-2398-030CN |
| RG5-3545-000CN |
Receptacle - Power inlet assembly - A/C input and power switch -
RG5-3545-000CN |
| RG5-3524-000CN |
Registration - Registration roller assembly -
RG5-3524-000CN |
| RG5-3524-130CN |
Registration - Registration Roller Assembly -
RG5-3524-130CN |
| RG5-3624-100CN |
Reversing_Unit - Reversing assembly for Duplexer assembly -
RG5-3624-100CN |
| RB2-1731-000CN |
Rod - Switch rod - Mechanical link between on/off switch lever and electrical on/off switch at power inlet assembly -
RB2-1731-000CN |
| C4110-67910 |
Roller - Transfer roller kit - Transfer roller with tools and repair instruction guide -
C4110-67910 |
| C4110-67911 |
Roller - 500 sheet tray kit - Pickup roller and feed roller for 500 sheet input tray - Includes tools and instructions -
C4110-67911 |
| C4110-67912 |
Roller - Pickup roller kit - Pickup roller with repair instruction guide -
C4110-67912 |
| C4110-67913 |
Roller - 250 sheet tray kit - Pickup roller and separation pad for 250 sheet input tray - Includes tools and instructions -
C4110-67913 |
| C4110-67933 |
Roller - Pickup roller kit - Pickup roller with repair instruction guide -
C4110-67933 |
| RB1-6251-000CN |
Roller - Lower delivery roller - Presses against the lower delivery roller shaft assembly -
RB1-6251-000CN |
| RB1-8865-000CN |
Roller - Paper pickup roller (D-shaped) - Sold individually -
RB1-8865-000CN |
| RB2-1820-020CN |
Roller - Pickup roller - Tray 1 pickup roller -
RB2-1820-020CN |
| RB2-1820-040CN |
Roller - Pickup roller - Tray 1 pickup roller -
RB2-1820-040CN |
| RB2-1821-020CN |
Roller - Paper pickup roller assembly (D-shaped) - Rubber roller on a plastic frame - Locks on to the paper pickup shaft in the 250-sheet paper feeder assebmly base unit -
RB2-1821-020CN |
| RB2-1821-030CN |
Roller - Paper pickup roller assembly (D-shaped) - Rubber roller on a plastic frame - Locks on to the paper pickup shaft in the 250-sheet paper feeder assebmly base unit -
RB2-1821-030CN |
| RB2-1984-000CN |
Roller - Delivery roller - Paper output shaft with four rollers -
RB2-1984-000CN |
| RB2-1985-000CN |
Roller - Lower output delivery roller - Shaft with four rollers -
RB2-1985-000CN |
| RB2-1998-000CN |
Roller - Roller - Upper roller of face-down roller guide - 4 used -
RB2-1998-000CN |
| RB2-3232-000CN |
Roller - Feed roller - Shaft with round rollers that moves paper after pickup roller on 500 sheet feeder assembly -
RB2-3232-000CN |
| RF5-2634-000CN |
Roller - Feed roller - Moves paper after pickup roller -
RF5-2634-000CN |
| RF5-2636-000CN |
Roller - Pickup roller assembly - Picks paper out of tray -
RF5-2636-000CN |
| RG5-3519-000CN |
Roller - Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit -
RG5-3519-000CN |
| RG5-3519-020CN |
Roller - Pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit -
RG5-3519-020CN |
| RG5-3519-070CN |
Roller - Tray 1 pickup roller assembly - Shaft/roller assembly that feeds paper from paper input assemblies - Also order separation pad kit -
RG5-3519-070CN |
| RG5-3521-020CN |
Roller - Tray 2 paper pickup roller assembly -
RG5-3521-020CN |
| RG5-3521-040CN |
Roller - Tray 2 paper pickup roller assembly -
RG5-3521-040CN |
| RG5-3522-030CN |
Roller - Paper feed roller assembly -
RG5-3522-030CN |
| RG5-3524-110CN |
Roller - Registration roller assembly -
RG5-3524-110CN |
| RG5-3542-000CN |
Roller - Upper delivery roller assembly - Paper output roller assembly - Includes right and left roller bushings, anti-static brush and delivery guide -
RG5-3542-000CN |
| RG5-3542-070CN |
Roller - Upper delivery roller assembly - Paper output -
RG5-3542-070CN |
| RG5-3579-000CN |
Roller - Transfer roller assembly -
RG5-3579-000CN |
| RG5-5453-090CN |
Roller - Fusing roller assembly - Fusing roller/heating element assembly - 110 volt -
RG5-5453-090CN |
| RG9-1337-000CN |
Roller - Face down guide roller -
RG9-1337-000CN |
| RF5-2633-000CN |
Sensor - Tray sensor assembly -
RF5-2633-000CN |
| RF5-4151-000CN |
Sensor - Tray sensor assembly -
RF5-4151-000CN |
| RG5-3553-000CN |
Sensor - Rear door sensor assembly - Arm and mount assembly -
RG5-3553-000CN |
| C4110A-Manual |
Service_Guide - HP LaserJet 5000 Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. -
C4110A-Manual |
| C4110A-Manual |
Service_Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. For LaserJet 5000 -
C4110A-Manual |
| C4110A-Repair |
Service_Printer - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. For LaserJet 5000 -
C4110A-Repair |
| RB1-6192-000CN |
Shaft - Paper feed shaft -
RB1-6192-000CN |
| RB2-1800-000CN |
Shaft - Pickup roller shaft - Tray 2 -
RB2-1800-000CN |
| RB2-1886-000CN |
Shaft - Paper feed shaft - Drives all three belts -
RB2-1886-000CN |
| WG8-5362-000CN |
Shaft - Photo-sensor (TLP1241) - Sensor flag activated. -
WG8-5362-000CN |
| C6072-60304 |
Software - Software for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series -
C6072-60304 |
| C6072-60305 |
Software - Software for LaserJet 8000 Series, Color LaserJet 4500 Series, LaserJet 5000 Series, LaserJet 4000 Series -
C6072-60305 |
| C6072-60306 |
Software - Software for LaserJet 2100 Series, LaserJet 3100 Series, LaserJet 6P Series, LaserJet 8100 Series -
C6072-60306 |
| C6072-60307 |
Software - Software for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series -
C6072-60307 |
| RH7-5194-000CN |
Solenoid - Tray 1 paper pickup solenoid - SL404 -
RH7-5194-000CN |
| RH7-5195-000CN |
Solenoid - Cassete paper pickup solenoid -
RH7-5195-000CN |
| RB1-6136-000CN |
Spring - Tray 1 sensor arm spring - Holds tension on sensor arm -
RB1-6136-000CN |
| RB2-1739-000CN |
Spring - Door switch spring - Provides tension for toner door switch -
RB2-1739-000CN |
| RB2-1759-000CN |
Spring - Control panel leaf spring -
RB2-1759-000CN |
| RB2-1772-000CN |
Spring - Leaf spring for tray 1 -
RB2-1772-000CN |
| RB2-1783-000CN |
Spring - Paper sensor lever spring -
RB2-1783-000CN |
| RB2-1784-000CN |
Spring - Paper sensor lever spring - Holds tension on sensor arm -
RB2-1784-000CN |
| RB2-1808-000CN |
Spring - Lever spring - Provides tension for paper sensor flag -
RB2-1808-000CN |
| RB2-1825-000CN |
Spring - Leaf spring - Tray size sensor fingers -
RB2-1825-000CN |
| RB2-3284-000CN |
Spring - Leaf spring - Provides tension on tray for proper alignment -
RB2-3284-000CN |
| RB2-3286-000CN |
Spring - Leaf spring - Tray size sensor spring -
RB2-3286-000CN |
| RS5-2225-020CN |
Spring - Face down guide roller torsion spring -
RS5-2225-020CN |
| RS5-2431-000CN |
Spring - Transfer roller spring - Provides tension for roller bushing -
RS5-2431-000CN |
| RS5-2434-000CN |
Spring - Tray 2 shaft gear spring - Holds tension on shaft hook -
RS5-2434-000CN |
| RS5-2632-000CN |
Spring - Tension spring - Provides tension for pickup roller -
RS5-2632-000CN |
| RS5-2952-000CN |
Spring - Latch plate spring - Holds tension on rear tray latches -
RS5-2952-000CN |
| RB2-1977-000CN |
Strap - Tray support strap - Supports rear drop down output tray -
RB2-1977-000CN |
| RB2-1732-000CN |
Switch - Door switch - Indicates when toner door is ajar -
RB2-1732-000CN |
| RB2-1744-000CN |
Switch - On/off switch for HP LaserJet 5000 Series -
RB2-1744-000CN |
| RG5-3579-020CN |
Transfer_Assembly - Transfer Roller Assembly -
RG5-3579-020CN |
| C4116-69001 |
Tray - Tray-250 Sheet, Paper250-sheet paper cassette tray assembly - Includes the paper tray assembly with the separation pad, paper width adjusters, and rear paper stop -
C4116-69001 |
| C4116A |
Tray - LaserJet 5000/N/GN 250 Sheet Universal paper input tray - Holds 250 sheets of letter, legal, Executive, ledger/tabloid, A3, A4, A5, B, B4, or B5 size paper -
C4116A |
| C4117-69001 |
Tray - 500 sheet universal paper tray -
C4117-69001 |
| C4117A |
Tray - LaserJet 5000 500 Sheet Universal paper input tray - Holds 250 sheets of letter, legal, Executive, ledger/tabloid, A3, A4, A5, B, B4, or B5 size paper -
C4117A |
| RG5-3552-060CN |
Tray - Face up tray assembly - Drop down output tray with extension -
RG5-3552-060CN |
| RG5-7164-060CN |
Tray - 500 Sheet paper tray - 500 Sheet universal replacement paper cassette -
RG5-7164-060CN |
| RG5-7188-020CN |
Tray - 250-sheet paper cassette tray assembly - Includes the paper tray assembly with the separation pad, paper width adjusters, and rear paper stop -
RG5-7188-020CN |
Techical Help
Buy the full service manual
View full list of service parts