Still delivering HP Parts amid Covid-19 Pandemic, shop with confidence!
|
![]() |
||
HP parts available for C4252A HP LaserJet 4050T Printer
RB1-8756-000CN
Actuator - Toner cartridge drive rod
RB1-8851-000CN
Actuator - Power switch actuator rod
C2809A
Adapter - Serial cable adapter - 9-pin (M) to 25-pin (F)
C4125A
Adapter - HP LaserJet 4000/4000N Series universal paper tray - Letter to A5 size paper - This is the 500 sheet removeable tray ONLY - NOT the feeder assembly
RB1-8700-000CN
Arm - Laser shutter arm
RB1-8787-000CN
Arm - Tray 1 paper sensor actuator arm
RB1-8879-000CN
Arm - Paper tray sensing arm
RB1-8910-000CN
Arm - Paper tray sensing arm
RB2-2387-000CN
Arm - Tray 1 retaining arm
RF5-3116-000CN
Arm - Tray 1 paper sensor actuator arm and cover
RG5-2650-000CN
Arm - Delivery sensor arm assembly
J6057-69001
Backbone - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-69021
Backbone - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
C7833-40014
Base - Reversible base assembly - Used in the lower position when one 500-sheet tray is installed on the LaserJet, or the upper position when two 250-sheet trays are installed - The print-to-mail accessory sits on this base
RS5-1179-000CN
Bearing - Transport roller bearing
RS5-1309-000CN
Bearing - Transport roller bearing
RB1-8668-030CN
Belt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
RB1-8946-000CN
Bushing - Separation roller bushing
RB1-8688-000CN
Button - Engine test button - Manual test button
RB1-8849-000CN
Button - Power Switch Button
RB1-8849-030CN
Button - Power switch button
5063-1256
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
5063-1257
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
92215N
Cable - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors
92215S
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long
C2932A
Cable - RS-232C serial cable - 9-pin (M) to 9-pin (F) - 3.0m (9.8ft) long
C2933A
Cable - RS-232C serial cable - 9-pin (M) to 25-pin (F) - 3.0m (9.8ft) long
C2950A
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long
C2951A
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long
C2990A
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long
C2991A
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long
RG5-3700-000CN
Cable - Cable assembly - 3-pin (F) connectors on each end - 10.0cm (3.9in) long
RG5-3703-000CN
Cable - Cable assembly - Large 6-pin (F) connector to both a 6.5cm (2.6in) grounding cable with a ring terminal and a 39.4cm (15.5in) cable with a small 6-pin (F) connector
RG5-3704-000CN
Cable - Envelope feeder connector and cable
RG5-3705-000CN
Cable - Cable assembly - A 6-pin (F) connector to both a 21.3cm (8.4in) cable with a 3-pin (F) connector and a 27.2cm (10.7in) cable with a 3-pin (F) connector
RG5-3706-000CN
Cable - Feed/registration sensor assembly cable
RG5-3708-000CN
Cable - Cable assembly - A 38-pin (F) connector to a 14cm (5.5in) ribbon cable with a 26-pin (F) connector, a 20cm (7.9in) ribbon cable with a 10-pin (F) connector, and a 34.6cm (13.6in) 2 wire cable with a 2-pin (F) connector
RG5-3709-000CN
Cable - Main motor cable
RG5-3710-000CN
Cable - Paper feeder module cable
RG5-3822-000CN
Cable - Paper feeder cable
RG5-3876-000CN
Cable - Cable assembly with ferrite - A 13-pin (F) connector, a 6-pin (F) connector, a 4-pin (F) connector, and three 3-pin (F) connectors - 38.4cm (15.1in) long
C4127A
Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has standard capacity toner (Prints approximately 6, 000 pages)
C4127X
Cartridge - Black toner (EP) cartridge - With 'Micro-Fine' toner - Has maximum capacity toner (Prints approximately 10,000 pages)
5090-3379
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills
C4119-67901
Clip - Paper limit clip kit
RB1-8848-000CN
Clip - Left side panel retainer clip
RB1-8860-000CN
Clip - Right side panel retainer clip
RB1-8912-000CN
Clip - Retainer clip - For left side of D-shaped pickup roller
XD2-1100-502CN
Clip - E-ring clip for HP Color LaserJet 1500 Series
XD9-0135-000CN
Clip - Shaft E-clip for HP LaserJet 4000 Series
RB1-8974-000CN
Clutch - Separation roller clutch - Torque limiter
VS1-6174-006CN
Connector - Feed drive assembly connector
VS1-6176-006CN
Connector - 250/500 sheet feeder connector
RG5-2666-000CN
Control Panel - Control Panel - Does Not Include Overlay
RG5-5372-050CN
Control Panel - Control panel - Does not include overlay
C4119-67902
Coupler - Coupler kit - Contains pickup roller coupler, four paper tray load limit clips and installation instruction sheet
RB1-8945-000CN
Coupler - Separation roller/gear coupler
5021-0349
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA
5851-2583
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA
C4232-60101
Cover - Dust cover - For use with models featuring a standard 1X500 paper tray
C4232A
Cover - Dust Cover - Used on Models With Standard 1X500 Paper Tray
C4233-60101
Cover - Dust cover - For use with models featuring standard 2X250 paper trays
C4233A
Cover - Dust Cover - Used on Models With Standard 2X250 Paper Trays
C4234-60101
Cover - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays
C4234A
Cover - Dust cover - For use with optional 500-sheet feeder on LJ4000/4050/4100 models using 1X500 or 2X250 paper trays
RB1-8706-000CN
Cover - Main cooling fan cover
RB1-8710-000CN
Cover - Plate cover for HP LaserJet 4000 Series
RB1-8788-000CN
Cover - Tray 1 sensor arm cover - Tray 1 paper sensor actuator arm and cover
RB1-8805-000CN
Cover - Rear fuser cover panel
RB1-8858-000CN
Cover - Formatter board cover panel
RB1-8907-000CN
Cover - Feeder control PCA cover
RB1-9044-000CN
Cover - Top cover - Duplexer access top cover
RB1-9045-000CN
Cover - Duplexer rear cover panel
RB1-9047-000CN
Cover - Right side duplexer cover
RB2-2386-000CN
Cover - Envelope feeder drive cover
RF5-1876-000CN
Cover - Left side duplexer cover - With connector
RG5-2663-040CN
Cover - Top Cover Assembly - Does Not Include Control Panel
RG5-2663-090CN
Cover - Plate cover for HP LaserJet 4100 Series
RG5-2664-070CN
Cover - Right front cover assembly - Mounts bedie the formatter panel
RG5-2665-000CN
Cover - Left side cover assembly - Includes panel retainer clip
RG5-2677-000CN
Cover - Upper right cover assembly
RG5-2678-000CN
Cover - Upper left cover assembly
RG5-2679-000CN
Cover - Right lower side feeder cover assembly
RG5-2680-000CN
Cover - Left lower feeder cover assembly
C4118-67907
Door - Tray 1 door assembly kit - New style pull-out tray with extension and new spring - Includes instructions
C2985-69031
Drive Assembly - 3.5GB EIO hard drive - LaserJet EIO font/print job storage
RG5-2653-020CN
Drive Assembly - Print drive gear assembly
RG5-2690-000CN
Drive Assembly - Optional 500 sheet paper pickup drive assembly
RG5-3721-000CN
Drive Assembly - Delivery drive assembly
C4123-69001
Duplexer - Duplexer assembly- Duplexer Duplex Assembly Unit for LaserJet 4000 & 4050
C4123A
Duplexer - Duplexer assembly - For two sided printing - Duplexer Duplex Assembly Unit for LaserJet 4000 & 4050
C4122-69001
ENVY - Envelope feeder assembly Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes
RH7-1334-000CN
Fan - Main cooling fan for LaserJet 4000/4050 series.
RH7-1335-000CN
Fan - Main cooling fan for LaserJet 4000/4050 series
RH7-1361-000CN
Fan - Tubeaxial fan - 24VDC
C4122A
Feeder - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes
C8053-69002
Feeder - Power envelope feeder - Holds 75 monarch, C5, DL, B5, or COM10 envelopes
RG5-2651-090CN
Feeder - Paper feed assembly
RG5-2682-000CN
Frame - Middle frame assembly - Sits between the upper and lower 2 x 250 module tray cavities
RG5-2687-000CN
Frame - Right side frame assembly
RG5-2688-000CN
Frame - Left side frame assembly
C4118-69011
Fuser Assembly - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation
C4118-69012
Fuser Assembly - Fusing assembly - For 220 VAC operation - Bonds toner to paper by heat;Click to order the functional equivalent: C4118-69002
RG5-2661-490CN
Fuser Assembly - Fuser Assembly - 110 volts Fuser Assembly - Bonds the toner to the paper with heat - For 110V to 127VAC operation
RG5-2662-500CN
Fuser Assembly - Fusing assembly - For 220 VAC operation - Bonds toner to paper by heat
RB1-8948-000CN
Gear - Separation roller drive gear
RS5-0911-000CN
Gear - Coupler gear for HP LaserJet 4000 Series
RS5-0946-000CN
Gear - Transport roller drive gear
RB1-8694-000CN
Ground - Interlock switch support ground strap
RB1-8708-000CN
Ground - Gear plate ground strap
RB1-8747-000CN
Ground - Registration assembly grounding plate
RB1-8704-030CN
Guide - Bottom cable guide
RB1-8757-000CN
Guide - Gear assembly plate cable guide
RB1-8862-000CN
Guide - Formatter/control panel cable guide
RB1-8873-000CN
Guide - Paper Guide Support - this is the bigger piece showing on the diagram. (guide only part number is RB1-8890-000CN).
RB1-8890-000CN
Guide - Paper guide - Includes paper guide for 500 sheet feeder. (For bigger item please order RB1-8873-000CN).
RB1-8914-000CN
Guide - Lower paper guide
RB1-8924-000CN
Guide - Optional lower cassette support guide
RG5-2643-020CN
Guide - Paper feed guide assembly
RG5-2643-160CN
Guide - Paper feed guide assembly
C2985-60008
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage
C2985-61021
Hard Drive - 20GB EIO hard drive - LaserJet EIO font/print job storage
C2985-61031
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage
RB1-8703-000CN
Hardware - Module attachment screw - Long screw with shoulder at bottom
RB1-8689-000CN
Holder - Cable holder for HP LaserJet 4000 Series
RB1-8690-000CN
Holder - Toner cartridge sensing spring retainer
RB1-2190-000CN
Hook - Pickup roller spring hook
RB1-9009-000CN
Indicator - Level indicator - Small oval button on front left side of tray - Moves vertically to show amount of paper in tray
RB1-8838-000CN
Insulator - Sheet insulator - Plastic sheet between PCA and metal plate
C4118-61101
Kit - Self-paced training kit for LaserJet 4000 - Includes NTSC video, service manual bundle, user manual bundle, and five additional student guides
C4118-67905
Kit - Self paced training kit for laser Jet 4000 family - Includes NTSC format video (VHS) and five student guides
C4119-99047
Kit - LaserJet 4000T/4050T series manual bundle - Includes user`s manual, `Getting Started` guide, and pocket quick reference guide (English)
C4251-99001
Kit - LaserJet 4050 series getting started bundle - Includes quick reference guide and getting started guide (English)
C4251-99002
Kit - LaserJet 4050 series getting started bundle - Includes quick reference guide and getting started guide (French)
C4251-99005
Kit - LaserJet 4050 series getting started bundle - Includes quick reference guide and getting started guide (Spanish)
C4118-69005
Laser Scanner - Laser/scanner assembly
RG5-2641-000CN
Laser Scanner - Laser/scanner assembly
RB1-8846-000CN
Latch - Rear output tray - Drop down release latch
RB1-9033-000CN
Lever - Upper tray sensing lever - Actuates switches on control board
RB1-9034-000CN
Lever - Lower tray sensing lever - Actuates switches on control board
RB1-8961-000CN
Lifter - Arm lifter - White plastic arm that holds top left side metal corner piece up when loading paper in tray
RB1-8962-000CN
Lifter - Arm lifter - White plastic arm that holds top right side metal corner piece up when loading paper in tray
RB1-9012-000CN
Lifter - Lifter arm - White plastic arm that holds top left side metal corner piece up when loading paper in tray
RB1-9013-000CN
Lifter - Lifter arm - White plastic arm that holds top right side metal corner piece up when loading paper in tray
C4118-67903
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide
C4118-67909
Maintenance Kit - LaserJet 4000 series Maintenance kit (120V) - Includes (new) 120VAC Fuser Assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide
C4118-67910
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide
C4118-69001
Maintenance Kit - Maintenance kit (120V) - Includes exchange 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide
C4118-69002
Maintenance Kit - Maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, transfer roller, six pick-up/separation rollers, multi-purpose/tray 1 pick-up roller, vinyl gloves, and instruction guide
C7851A
Maintenance Kit - Maintenance kit (120V) - Includes (new) 120VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide
C7852A
Maintenance Kit - Maintenance kit (220V) - Includes (new) 220VAC fusing assembly, transfer roller, six pickup/separation rollers, MP Tray/Tray 1 pickup roller, vinyl gloves, and instruction guide
C4118-91028
Manual - Additional self-paced training guides (English) - Pack of 5
C4251-91003
Manual - Manual for LaserJet 4050 Series
C6072-60301
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English)
C4135A
Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
C4136A
Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
C4137A
Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module
C4140A
Memory - 4MB, 100-pin SDRAM DIMM memory module
C4251-67905
Memory - Firmware DIMM - Upgrade firmware version 6.36
C4286A
Memory - 2MB flash DIMM memory - Font storage device
C4287A
Memory - 4MB flash DIMM memory - Font storage device
C4292A
Memory - 8MB Traditional Chinese MROM DIMM - For LaserJet printers
C4293A
Memory - 8MB simplified Chinese MROM DIMM - For LaserJet printers
C7842A
Memory - 4MB, 100-pin SDRAM DIMM memory module
C7842AX
Memory - 8MB, 100MHz SDRAM DIMM memory module
C7843A
Memory - 16MB, 100-pin SDRAM DIMM memory module
C7845A
Memory - 32MB, 100-pin SDRAM DIMM memory module
Q7707AX
Memory - 32MB, 100-pin SDRAM DIMM memory module
RH7-1331-000CN
Motor - Main motor assembly
RB1-8926-000CN
Mount - Transport roller pressure mount
RB1-9095-020CN
Mount - Envelope mount - Pivotal holder for envelope weight
RF5-2798-000CN
Mount - Envelope mount - Pivotal holder for envelope weight
C4251-40001
Overlay - LaserJet 4050/4100 control panel overlay (English)
C4251-40002
Overlay - LaserJet 4050/4100 control panel overlay (French)
C4251-40003
Overlay - LaserJet 4050/4100 control panel overlay (Italian)
C4251-40004
Overlay - LaserJet 4050/4100 control panel overlay (Portuguese)
C4251-40005
Overlay - LaserJet 4050/4100 control panel overlay (Norwegian)
C4251-40006
Overlay - LaserJet 4050/4100 control panel overlay (Hungarian)
C4251-40007
Overlay - LaserJet 4050/4100 control panel overlay (Swedish)
C4251-40008
Overlay - LaserJet 4050/4100 control panel overlay (Polish)
C4251-40009
Overlay - LaserJet 4050/4100 control panel overlay (Russian)
C4251-40010
Overlay - LaserJet 4050/4100 control panel overlay (Czechoslovakian)
C4251-40011
Overlay - LaserJet 4050/4100 control panel overlay (Korean)
C4251-40012
Overlay - LaserJet 4050/4100 control panel overlay (Simplified Chinese)
C4251-40013
Overlay - LaserJet 4050/4100 control panel overlay (Traditional Chinese)
C4251-40014
Overlay - LaserJet 4050/4100 control panel overlay (German)
C4251-40015
Overlay - LaserJet 4050/4100 control panel overlay (Spanish)
C4251-40016
Overlay - LaserJet 4050/4100 control panel overlay (Danish)
C4251-40017
Overlay - LaserJet 4050/4100 control panel overlay (Dutch)
C4251-40018
Overlay - LaserJet 4050/4100 control panel overlay (Greek)
C4251-40019
Overlay - LaserJet 4050/4100 control panel overlay (Finnish)
C4251-40020
Overlay - LaserJet 4050/4100 control panel overlay (Turkish)
C4251-40021
Overlay - LaserJet 4050/4100 control panel overlay (Hebrew)
C4251-40022
Overlay - LaserJet 4050/4100 control panel overlay (Arabic)
C4251-40023
Overlay - LaserJet 4050/4100 control panel overlay (Japanese)
C4251-40024
Overlay - LaserJet 4050/4100 control panel overlay (Thailand)
RF5-3086-000CN
Pad - Separation pad for tray 1 pickup assembly
RG5-5281-020CN
Pad - Separation pad assembly, with black pastic arms. Pad is for Tray 1 pickup assembly
RB1-8841-000CN
Panel - Toner cartridge access panel
RB1-9001-000CN
Panel - Separation roller access panel
RB2-2400-000CN
Panel - Left duplex access panel - Covers the left duplexer mount
RB2-2401-000CN
Panel - Right duplex access panel - Covers the right duplexer mount
RG5-2648-110CN
Paper Output Unit - Paper delivery assembly
C4118-69009
PC Board - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate
C4118-69010
PC Board - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate
C4251-67909
PC Board - Formatter board assembly
C4251-69001
PC Board - Formatter board assembly
J3111-69001
PC Board - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector;Click to order the functional equivalent: J4135-61001
J4135-61001
PC Board - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port
J4167-69001
PC Board - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
RG5-2685-000CN
PC Board - Feeder control board Lower tray logic PCA - With tray size switches for 250 sheet feeder. ( for 500 sheet feeder RG5-2673-000CN).
RG5-3693-080CN
PC Board - Engine controller board - Provides all power supply and motor control functions, including power switch - 110 volts - Does not include insulator sheet or bottom metal plate
RG5-3694-080CN
PC Board - Engine controller board - Provides all power supply and motor control functions - 220 volt - Does not include insulator sheet or bottom metal plate
RG5-3821-000CN
PC Board - Lower tray logic PCA - With tray size switches for 500 sheet feeder. ( for 250 sheet feeder RG5-2685-000CN).
J3110A
PC Board Interface - Ethernet 10Base-T (RJ-45) EIO network HP JETDIRECT 600N internal print server PC board
J3111A
PC Board Interface - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA
J3112A
PC Board Interface - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors
J3113A
PC Board Interface - JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot
J4135A
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers
J4167A
PC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors
J4169A
PC Board Interface - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual
J7934-69011
PC Board Interface - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021
RG5-2655-360CN
Pickup Assembly - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid
RG5-2672-000cn
Pickup Assembly - 500 sheet paper pickup drive assembly
RG5-2683-000CN
Pickup Assembly - Upper paper pickup drive assembly - 250 sheet
RG5-2684-000CN
Pickup Assembly - Lower paper pickup drive assembly - 250 sheet
RB1-9371-000CN
Plate - Adjustable paper length stop plate
RB2-2404-000CN
Plate - Cover plate - Metal bottom plate that attaches to the engine controller PC board
RB2-2405-000CN
Plate - Control panel ground plate - Metal clip that provides the ground connection for control panel
RF5-1867-000CN
Plate - Pre-transfer ground plate assembly
RF5-2496-000CN
Plate - Coupler gear mounting plate
RB1-8928-000CN
Plunger - Tray identifier plunger - Identifies tray number installed
8120-6802
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has 90 degree (F) receptacle (for 220V in Europe, Saudi Arabia, South Africa, and India)
8120-6805
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has 90 degree receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan)
C7833-60102
Power Module - Power supply module - 100-240VAC input, 50-60Hz - 24VDC output, 2.7A, 65 watts - Includes detachable AC power cord for use in North America (flat blade, polarized, ungrounded)
J3111-61001
Print Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector
J3112-69001
Print Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector
J3113-61001
Print Server - JetDirect 600N EIO Internal Print Server internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector
J6057-69011
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-61001
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-61011
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
J7934-69001
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector.
RG5-3696-000CN
Receptacle - AC power receptacle - Connector and housing assembly
C4252A-Repair_LaserJet
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
XD9-0232-000CN
Retainer - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear
H3969-60001
Roller - Paper path roller kit - Includes pickup D rollers (8 each) , Feed/Separation rollers (4 each) and Tray 1 pickup roller (1 each) - Installation procedure requires use of service manual
RB1-8877-000CN
Roller - Pickup Roller Coupler
RB1-8922-000CN
Roller - Transport pressure roller
RB1-8923-000CN
Roller - Transport roller
RB1-8923-020CN
Roller - Paper feed roller
RB1-8957-000CN
Roller - Paper pickup roller - 'D' roller (Sold individually)
RB9-0684-000CN
Roller - Fusing assembly pressure roller
RF5-1885-000CN
Roller - Feed/separation roller - Roller is gray with blue tab protruding out one side
RF5-2484-000CN
Roller - Pickup roller assembly
RG5-2652-070CN
Roller - Registration assembly
RG5-2652-170CN
Roller - Registration assembly
RG5-3718-000CN
Roller - Tray 1 pickup roller assembly - D-shaped roller with blue shaft lock latch
RG5-4283-000CN
Roller - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on
RG5-4290-000CN
Roller - Fusing roller - Heating element and film sleeve - 110V
RG5-4290-100CN
Roller - Fusing roller - Heating element and film sleeve - 110V
RG5-2642-000CN
Sensor - Registration and feed sensors assembly - Includes PS102/103
WG8-5624-000CN
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated
WG8-5849-000CN
Sensor - Duplex re-pick sensor - Detects the leading edge of the page
C4251-60107
Service Manual - LaserJet 4050 user's documentation (In PDF format) - On CD-ROM - Includes LaserJet 4050, fast infared receiver, and JetDirect print server user's guides (Multilingual)
C4251-60116
Service Manual - HP LaserJet 4050 printer service/support training and documentation - Includes LaserJet 4000/4050 service manual, LaserJet 4050 user's guide, & self-paced training materials
C4252A-Manual_Laser
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams.
RB1-8674-000CN
Shaft - Belt drive shaft
WG8-5362-000CN
Shaft - Photo-sensor (TLP1241) - Sensor flag activated.
C6072-60304
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German)
C6072-60305
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French)
C6072-60306
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish)
C6072-60307
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)
RH7-5172-000CN
Solenoid - Tray 1 paper pickup drive solenoid
RF5-2489-000CN
Spindle - Separation roller mounting assembly
RF5-2505-000CN
Spindle - Separation roller mounting assembly
RB1-8693-000CN
Spring - Toner cartridge drum ground spring
RB1-8695-000CN
Spring - Toner cartridge sensing spring
RB1-8702-000CN
Spring - Laser shutter spring - Provides tension for laser shutter
RB1-8827-000CN
Spring - Leaf spring for HP LaserJet 4050 Series
RB1-8847-000CN
Spring - Rear tray latch release spring
RB1-8927-000CN
Spring - Left side frame leaf spring
RB1-9016-000CN
Spring - Torsion spring - Provides tension for right and left tray lifter arms
RS5-2632-000CN
Spring - Tension spring - Provides tension for pickup roller
RS5-2967-000CN
Spring - Compression spring for tray identifier plunger
RS5-2981-000CN
Spring - Paper stop spring - Provides tension for tray plate stop
RU5-2066-000CN
Spring - Transport roller spring
C7833-40012
Stop - Upper fold chute stop - Used to set the position of the upper fold on the paper (or form) - Has `1-4` fold indicators - Inserts in the top of the print-to-mail accessory
C7833-40013
Stop - Lower fold chute stop - Used to set the position of the lower fold on the paper (or form) - Has `A-D` fold indicators - Inserts below the output bin slot on the print-to-mail accessory
RB1-9374-000CN
Stop - Tray paper stop - Locks paper length plate in slot
RB1-8671-000CN
Support - Left side top cover support
RB1-8913-000CN
Support - Paper guide lower support
RG5-2645-000CN
Support - Right side top cover support assembly
RF5-1883-040CN
Swing - Arm Swing for HP LaserJet 4000 Series
WC4-5139-000CN
Switch - Top cover interlock access switch
C3122A
Tray - 500 sheet tray - Letter/legal/A4 sizes - Paper cassette
C4124A
Tray - LaserJet 4000/N/T/TN 500 Sheet feeder with universal paper tray - Holds up to 500 sheets of paper from A5 size to legal size paper
C4125-67901
Tray - 500 sheet universal paper tray assembly - This is ONLY the tray that holds the paper, NOT the optional feeder assembly (C4124A) that the printer sits on - Holds A5 to Legal size paper - Replaces C3122A Tray
C4126-67901
Tray - 250 sheet universal paper tray assembly
C4126A
Tray - HP LaserJet 4000T/4000TN Series universal paper tray - Letter, legal, Executive
C7833-40015
Tray - Output bin (Exit tray) - Holds the folded paper output - Can be adjusted for legal size forms, or the extendable portion can removed for large mailings (output drops into box) - Mounts to the rear of the pint-to-mail accessory
RB1-8843-000CN
Tray - Rear output tray for Hewlett Packard LaserJet printers
RB1-8844-000CN
Tray - Rear output tray pull-out extension
RB1-9088-000CN
Tray - Envelope feeder input tray
RG5-2655-100CN
Tray - Tray 1 paper pickup assembly - Complete assembly including pickup roller, separation pad, sensor arm, retaining arm and drive solenoid
RG5-2656-080CN
Tray - Paper input tray (Tray 1) - Multi-Purpose tray assembly
C8055A
Tray Assembly - LaserJet 4000/N/T/TN 500 Sheet feeder with universal paper tray - Holds up to 500 sheets of paper from A5 size to legal size paper
RF5-2511-000CN
Weight - Envelope weight for envelope feeder unit.
C4103-67901
Wireless PC Board - HP Fast Infrared Connect pod (FIR) - Allows wireless printing from any IRDA-compliant PC -Includes cable that plugs into formatter board port on back of printer
|
||
![]() |
|
|
Copyright © 2021 Partshere.com Privacy Policy Terms and Conditions Send us your Feedback |