| PA03002-C108FJ |
ADF - Automatic document feeder assembly |
| PA03002-C234FJ |
Arm - Sensor arm - Detects leading edge of ADF paper input |
| PA03002-C235FJ |
Arm - Sensor arm - Paper sensor arm for ADF |
| RA2-2484-000CN |
Arm - Bin full sensor arm |
| RB1-6417-000CN |
Arm - Registration paper sensor arm - Senses paper in registration assembly |
| RB1-6444-000CN |
Arm - Release arm for HP LaserJet 5Si Series |
| RB1-6446-000CN |
Arm - Release arm - Toner cartridge release arm - Hook shaped cartridge holder |
| RB1-6557-000CN |
Arm - Paper input unit sensor arm - Senses when paper passes through paper input unit |
| RB1-6557-020CN |
Arm - Paper input unit sensor arm - Senses when paper passes through paper input unit |
| PA03002-C233FJ |
Bearing - Drive roller bearing - Front drive roller bearing |
| PA03002-C265FJ |
Bearing - Drive roller bearing - Rear drive roller bearing |
| C3766-60503 |
Bed - Stapling unit bed assembly - Includes sliders that move sheets of paper to stapling position |
| C4785-80004 |
Belt - Belt for HP C3764A |
| PA03002-C111FJ |
Belt - ADF belt - Drives automatic document feeder rollers |
| PA03002-C222FJ |
Bracket - Output tray bracket - Rear ADF output tray mount |
| PA03002-C223FJ |
Bracket - Output tray bracket - Front ADF output tray mount |
| PA03002-C257FJ |
Bracket - Front bracket - Front panel support bracket |
| C3766-60508 |
Brush - Stapling unit antistatic brush - Eliminates static charge on paper |
| PA03002-C246FJ |
Brush - Paper antistatic brush assembly |
| PA03002-C206FJ |
Bushing - Rail bushing - Carrier unit support bushing |
| PA03002-C269FJ |
Bushing - Pick roller brass bushings - Supports pickup roller |
| RA2-2505-000CN |
Bushing - Output bin roller bushing |
| RB1-6441-000CN |
Bushing - Transfer guide bushing |
| RS5-1399-000CN |
Bushing - Drive bushing - Paper deck drive assembly bushing |
| 5063-1254 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector |
| 5063-1255 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector. |
| 8120-8749 |
Cable - IEEE 1394 (FireWire) cable with two ferrites - 6-pin to 6-pin - 1.9m (6.3ft) long |
| 92215N |
Cable - Interface cable kit - For HP peripherals designed for use in an AppleTalk/Phonenet network - Not for Macintosh models that have recessed I/O connectors |
| 92215S |
Cable - RS-422 serial cable - 8-pin (M) to 8-pin (M) - 2.0m (6.6ft) long |
| C2946A |
Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector. |
| C2947A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long |
| C4781-60504 |
Cable - Multi-Bin mailbox interface C-link cable - 45cm (17.7-in) long |
| C4787-60507 |
Cable - Stapler unit C-link cable - Has two high density 15-pin (M) connectors - 91.4cm (36in) long |
| PA03002-C125FJ |
Cable - Front panel cable - Between front panel and junction PCA |
| PA03002-C203FJ |
Cable - DC cable - From power supply to copier logic board |
| PA03002-C204FJ |
Cable - Carrier flex cable - From carrier unit to junction PCA |
| PA03002-C228FJ |
Cable - Sensor cable - Connects ADF sensors to copier control board |
| PA03002-C229FJ |
Cable - CCD cable - From control PCA to CCD PCA on optical unit |
| RG5-1843-000CN |
Cable - Paper sensor cable - J11 to J15 |
| RG5-1850-000CN |
Cable - Duplexer cable assembly - From duplexer to DC controller |
| RG5-1859-000CN |
Cable - Sensor cable - PIU PS2 sensor cable - J13 to J1205 |
| RG5-1861-000CN |
Cable - Cable assembly - 20-pin (F) connector on each end - 39.4cm (15.5in) long |
| RG5-1920-000CN |
Cable - Cassette size sensor cable - Between cassette size sensor PCA's and formatter board |
| RG5-1921-000CN |
Cable - Fan cable - Fan 3 power cable |
| RG5-1928-000CN |
Cable - Registration cable assembly - Includes 7P and 3P connectors |
| RG5-3909-000CN |
Cable - Power supply cable - Between power supply and controller PCA |
| RG5-3919-000CN |
Cable - Main cable - Largest cable in C4781A |
| RG5-4377-000CN |
Cable - Cable assembly - An 11-pin (F) connector, a 10-pin (F) connector, and two 7-pin (F) connectors - 1.1m (3.7ft) long |
| RG5-4378-000CN |
Cable - Cable assembly with ferrites - Has many connectors: a 14-pin (F), an 11-pin (F), two 7-pin (F), a 5-pin (F), two 4-pin (F), and two 3-pin (F) - 85.6cm (33.7in) long |
| RG5-4381-000CN |
Cable - Cable assembly - 18-pin (F) connector to 25.4cm (10in) grounding wire with ring terminal, 35.7cm (14in) cable with 4-pin (F) connector, 53.3cm (21in) cable with 1-pin (F) connector, and 86.4cm (34in) cable with 4-pin (F) connector |
| RG5-4386-000CN |
Cable - Cable assembly - From DC controller board to main motor |
| RG5-4439-000CN |
Cable - Feeder Cable for HP 09998390001 |
| RG5-4440-000CN |
Cable - Main cable on input assembly |
| C3763-70000 |
Cable Interface - Interface C-Link Cable for Hewlett Packard LaserJet Series. |
| C4781-70002 |
Cable Interface - Interface C-Link cable for Hewlett Packard LaserJet Series units. |
| PA03002-C201FJ |
Cap - Latch cap - ADF cover latch cap |
| U9845E |
Care Pack - HP Maintenance Kit Replacement LaserJet 8150 fuser 110 volts service |
| C4230-50000 |
Carrier - Carrier unit assembly - Holds optical scanner for flatbed scanner portion of copier |
| PA03002-C113FJ |
Carrier - Carrier unit assembly - Holds optical scanner for flatbed scanner portion of copier |
| 5184-5208 |
Cartridge - Black Ultra-Precise toner cartridge |
| 6R929 |
Cartridge - 82x hi yield black toner |
| C3772A |
Cartridge - HP LaserJet flat-wire staple cartridges for Multi-Bin Mailbox with Stapler - For LaserJet 8000, 8100, 8150, 5Si series and Mopier 240, 320 - Package of 3 with 2000 staples/cartridge |
| C4182X |
Cartridge - HP 82X Black Toner Cartridge (C4182X), High Yield |
| C4785-60510 |
Caster - Fixed caster - Non-adjustable height caster |
| C4785-60511 |
Caster - Fixed caster - Adjustable height caster |
| XZ9-0442-000CN |
Caster - Caster wheel for HP Color LaserJet 8550 |
| C7819-90903 |
Certificate - Email license certificate for MFP |
| C8539-90901 |
Certificate - FAX license certificate for MFP |
| C9122-90901 |
Certificate - NT authentication certificate for MFP |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| C4785-60512 |
Clip - Multibin mailbox attachment clip |
| RB2-3636-000CN |
Clip - Tray lock clip - At rear of top output tray |
| PA03002-C250FJ |
Clutch - Pickup roller clutch/gear assembly |
| RG5-4308-000CN |
Clutch - Registration assembly clutch |
| RH7-5188-000CN |
Clutch - Paper feed clutch |
| RH7-5204-000CN |
Clutch - Paper feed clutch |
| PA03002-C214FJ |
Collar - Carrier tension pulley collar - Sleeve that carrier pulley tension spring slides over |
| C4166-60102 |
Control Panel - Front control panel assembly - LCD touch screen and complete control button panel - This is the control panel for the copier module only |
| C4166-69102 |
Control Panel - Front control panel assembly - LCD touch screen and complete control button panel - This is the control panel for the copier module only |
| RG5-4384-000CN |
Control Panel - Control panel - Includes display |
| RG5-5268-000CN |
Control Panel - Control panel - Includes display |
| 5021-0349 |
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA |
| 5851-2583 |
Cover - EIO slot cover - Installs on formatter boards without JetDirect PCA |
| C3764-60555 |
Cover - Top cover for HP Color LaserJet 8550 |
| C3766-60501 |
Cover - Stapling unit top cover |
| C4166-69001 |
Cover - Cover-Rebuilt FB top cover |
| C4785-60503 |
Cover - Blind cover - Covers space trays and face-up bin - Home position cover for head assembly |
| C4785-60504 |
Cover - Front cover - Front side cover |
| C4785-60505 |
Cover - Side cover - Back side cover |
| PA03002-C104FJ |
Cover - Flatbed cover assembly - With paper chuter flip out and document holding pad |
| PA03002-C106FJ |
Cover - ADF cover - Automatic document feeder top cover |
| PA03002-C107FJ |
Cover - Upper cover - Frame around glass plate assembly |
| PA03002-C112FJ |
Cover - Pickup roller assembly cover |
| PA03002-C256FJ |
Cover - Carrier unit dust cover |
| PA03002-C264FJ |
Cover - Control panel cover |
| RA2-2531-000CN |
Cover - Release latch handle cover |
| RB1-6464-000CN |
Cover - Upper right side cover - Above drop down tray 1 |
| RB1-6480-000CN |
Cover - Lower Left Cover - Mounted below diverter door assembly |
| RB1-6489-000CN |
Cover - AC access cover - Has cut out for A/C power cord connection |
| RB1-6492-000CN |
Cover - Power switch cover - Has cutout for power switch |
| RB1-6502-000CN |
Cover - Cover Cable for HP C3166A |
| RB1-7832-020CN |
Cover - 2000 sheet paper tray right side cover |
| RB2-2509-000CN |
Cover - Clutch cover for 2000 sheet input tray |
| RB2-2519-000CN |
Cover - Back cover - Protects back of tray assembly |
| RB2-3631-000CN |
Cover - Clutch cover - Paper feed clutch cover |
| RB2-3642-000CN |
Cover - Right rear cover - Attaches to the sheet metal rear cover |
| RB2-3666-000CN |
Cover - Right side cabinet cover |
| RB2-3668-000CN |
Cover - Paper storage tray front cover |
| RB2-3675-000CN |
Cover - Back cover - Protects back of tray assembly |
| RB2-3690-000CN |
Cover - Clutch Cover for HP 09998390001 |
| RF1-4004-000CN |
Cover - Front cover - Cover with release latch handle |
| RF1-4008-000CN |
Cover - Back cover - For 7-bin table top mailbox |
| RF5-1402-000CN |
Cover - Rear cover - Sheet metal |
| RF5-2568-000CN |
Cover - Front cover - Contains LED status display window |
| RF5-2644-000CN |
Cover - Paper tray top cover - Includes label |
| RF5-2646-000CN |
Cover - Left cover - Left side cabinet cover |
| RF5-2762-000CN |
Cover - Front top cover - Cover where the 'Status' LED is located |
| RF5-2763-000CN |
Cover - Cover Feed for HP 09998390001 |
| RF5-2764-000CN |
Cover - Left cover - Left side cabinet cover |
| RF5-2766-000CN |
Cover - Paper tray top cover - Includes label |
| RG1-3838-000CN |
Cover - Top cover assembly - Upper guide |
| RG1-3840-000CN |
Cover - Right cover - Right side cover below the diverter assembly |
| RG5-4360-000CN |
Cover - Top cover assembly - Does NOT include face up tray or control panel display |
| RG5-4362-000CN |
Cover - Front cover - Front access door mounts to this cover |
| C4787-60513 |
Delivery - Stapling unit - Includes top cover, bed assembly, and board |
| RG5-1874-110CN |
Delivery - Face down delivery assembly - Feeds paper to top of printer |
| RG5-1874-170CN |
Delivery - Face down delivery assembly - Feeds paper to top of printer |
| RG1-3844-000CN |
Diverter - Diverter assembly - Flipper |
| RG5-4325-000CN |
Diverter - Diverter assembly - Diverts paper to duplexer assembly or face up tray or face down delivery assembly |
| RG5-4325-090CN |
Diverter - Diverter Assembly - Diverts Paper to Duplexer Assembly or |
| RB2-3558-000CN |
Door - Diverter door assembly - Upper door on left side of printer - Two struts are mounted to door (which are not included with diverter). |
| RB2-3626-000CN |
Door - Front access door - Duplexer jam removal access door |
| RG5-1915-040CN |
Door - Right door assembly - Door below paper tray 1 - Support strap attached to right side |
| C2985-69031 |
Drive Assembly - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| RF9-1249-000CN |
Drive Assembly - Diverter drive assembly - Four gear drive assembly - 20-tooth gear NOT included |
| RG5-3851-000CN |
Drive Assembly - Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| RG5-4365-000CN |
Drive Assembly - Main drive gear assembly |
| RG5-4416-000CN |
Drive Assembly - Paper deck drive assembly - Gear assembly that lifts the paper plate to the pickup roller |
| C4782-60501 |
Duplexer - Duplexer assembly - For two sided printing capability |
| C4782-69501 |
Duplexer - Duplexer assembly - For two sided printing capability |
| C4782-90901 |
Duplexer - Duplexer assembly - For two sided printing capability for hewlett packard LaserJet printers. |
| C4782A |
Duplexer - Auto duplexer assembly - Provides double sided printing capability on LaserJets 8100, 8500, 8000, and 5Si |
| C4785-60531 |
Extension - C-link cable adapter extension - Used when no input device is used with 8-bin or 5-bin mailbox |
| PA03002-C260FJ |
Extension - Paper chute flip out - Flip out paper tray extension |
| PA03002-C118FJ |
Fan - PC board cooling fan assembly |
| RH7-1266-000CN |
Fan - Tubeaxial fan for LaserJets |
| RH7-1271-000CN |
Fan - Fan for LaserJets |
| RH7-1289-000CN |
Fan - Fan/4 for LaserJets |
| RH7-1396-000CN |
Fan - Tubeaxial fan (low profile) |
| RH7-1397-000CN |
Fan - Fan for LaserJets |
| C3765-60501 |
Feeder - Replacement optional envelope feeder - Holds 100 envelopes |
| C3765-69501 |
Feeder - Replacement optional envelope feeder - Holds 100 envelopes |
| C3765B |
Feeder - Optional envelope feeder - Automatically feeds 100 envelopes |
| C4780-69503 |
Feeder - Paper feed assembly - Vertical transfer unit for 2x500 sheet tray assembly - Transfers paper from pickup assembly up to the printer input. Transfers paper from pickup assembly up to the printer input has 3 connectors. For two connectors unit C4781-69510. |
| C4781-69510 |
Feeder - Paper feed assembly - Vertical transfer unit for 2000 tray assembly - Transfers paper from pickup assembly up to the printer input has 2 connectors (for 3 connectors unit 2x500 tray unit order C4780-69503). |
| RG5-3854-000CN |
Feeder - Paper feed assembly - Vertical transfer unit for 2000 tray assembly - Transfers paper from pickup assembly up to the printer input has 2 connectors (for 3 connectors unit 2x500 tray unit order C4780-69503). |
| RG5-4305-000CN |
Feeder - Feeder assembly - Transfer roller and registration assembly are mounted on this assembly |
| RG5-4403-000CN |
Feeder - Paper feed assembly - Vertical transfer unit for 2x500 sheet tray assembly - Transfers paper from pickup assembly up to the printer input. (for 2000 tray assembly order C4781-69510). |
| PA03002-C262FJ |
Ferrite Assembly - Ferrite core - Attaches to the carrier ribbon cable |
| 92296T |
Film - Film (Transparency) for LaserJet II, LaserJet III, LaserJet 4 Series, LaserJet 4L Series |
| 92296U |
Film - Film (Transparency) for LaserJet 33x0 MFP Seriess, LaserJet 4100 Series, LaserJet P2xxx Printer, Color LaserJet CM1015 MFP |
| RA2-2485-000CN |
Flag - Sensor flag - Optical sensor for bin full sensor |
| C4785-60540 |
Flipper - Flipper assembly (with cable) - Moves paper from printer to face down mailbox tray or the face up bin on top |
| Q5693-67921 |
Flipper - Flipper assembly - Transports paper from the printer into the 8-bin mailbox assembly and either outputs it directly to the face-up output tray or flips it for transport to one of the face-down trays - Mounts on top of the assembly |
| Q5693-67922 |
Flipper - Flipper assembly (with cable) - Moves paper from printer to face down mailbox tray or the face up bin on top - Includes firmware chip |
| PA03002-C218FJ |
Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used) |
| RB1-6421-000CN |
Foot - Chassis foot - Support for right side of printer chassis - Two used |
| RG5-3853-000CN |
Foot - Adjustable foot - Threaded attachment for leveling |
| RG5-4203-000CN |
Foot - Outrigger adjustable foot - Adjusts up and down |
| RG5-4205-000CN |
Foot - Cabinet stabilizer (outrigger) - With adjustable foot |
| RG5-4206-000CN |
Foot - Adjustable foot - Threaded attachment for leveling |
| PA03002-C236FJ |
Frame - Pad assembly frame - Supports separation pad assembly |
| VD5-0056-301CN |
Fuse - Low voltage power supply fuse - For 110/120V operation |
| VD5-0066-301CN |
Fuse - Low voltage power supply fuse - For 110/120V operation |
| VD7-0646-301CN |
Fuse - Low voltage power supply fuse - For 220/240V operation |
| VD7-1893-151CN |
Fuse - Power supply fuse, 250V max |
| C4214-69007 |
Fuser Assembly - Fusing assembly - For 100 VAC to 120 VAC operation - Bonds toner to paper with heat |
| C4214-69018 |
Fuser Assembly - Fuser Assembly - For 100 VAC to 120 VAC operation - Bonds toner to paper with heat |
| C4265-69004 |
Fuser Assembly - Fuser Assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| C4265-69005 |
Fuser Assembly - Fuser Assembly (For 220V to 240V operation) - Bonds toner to paper with heat |
| C4265-69007 |
Fuser Assembly - Fusing assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat;Click to order the functional equivalent: C3915-69007 |
| C4265-69008 |
Fuser Assembly - Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-4318-000CN |
Fuser Assembly - Fuser Assembly - For 100 VAC to 120 VAC operation - Bonds toner to paper with heat |
| RG5-6532-000CN |
Fuser Assembly - Fuser Assembly - For 100 VAC to 120 VAC operation - Bonds toner to paper with heat |
| RG5-6532-010CN |
Fuser Assembly - Fuser Assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-6532-150CN |
Fuser Assembly - Fusing assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-6533-010CN |
Fuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat |
| RG5-6533-150CN |
Fuser Assembly - Fuser Assembly (220V) |
| PA03002-C231FJ |
Gear - Drive roller gear |
| PA03002-C232FJ |
Gear - Reduction cluster gear |
| PA03002-C219FJ |
Glass Assembly - Glass plate assembly - Copier flatbed glass, frame and lower ADF exit roller assembly |
| RB2-3641-000CN |
Guard - Hinge plate - Bottom half of top cover hinge |
| C3764-60561 |
Guide - Paper input guide |
| C3766-60507 |
Guide - Paper exit guide (Wire-form) |
| RB1-6771-000CN |
Guide - PCA guide - Formatter board support guides |
| RB1-6775-000CN |
Guide - Slide guide - Guide for formatter PCA |
| RB1-6776-000CN |
Guide - Tray rail guide (Spring loaded metal guide) |
| RB2-3622-000CN |
Guide - Toner cartridge guide - Plastic piece with slot to guide toner cartridge |
| RB2-3706-000CN |
Guide - Guide, Paper for HP 09998390001 |
| RF5-1394-000CN |
Guide - Transfer guide - Guide transfer roller is mounted into |
| RF5-1484-000CN |
Guide - Paper size guide/stop - For upper or lower paper input tray |
| RF5-2676-000CN |
Guide - Transfer guide - Guide transfer roller is mounted into. (complete trasfer roller assy. RG9-1361-020CN). |
| RG5-4364-000CN |
Guide - Toner cartridge guide - Rear guide - Plastic piece with slot to guide toner cartridge |
| RA2-2512-000CN |
Handle - Release handle - Latch lever handle |
| C2985-60008 |
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| C2985-61021 |
Hard Drive - 20GB EIO hard drive - LaserJet EIO font/print job storage |
| C2985-61031 |
Hard Drive - 3.5GB EIO hard drive - LaserJet EIO font/print job storage |
| C2985A |
Hard Drive - 2.1GB hard drive - LaserJet EIO font/print job storage |
| C2985B |
Hard Drive - 2.1GB hard drive - LaserJet EIO font/print job storage |
| PA03002-C123FJ |
Hardware - Paper guide / pick roller cover thumbscrew |
| C4785-60523 |
Head Assembly - Head assembly - Moves paper up and down the mailbox to the correct mailbox bin |
| RH7-4126-000CN |
Heater - Heater element for fusing assembly - 120V |
| C3766-60506 |
Hinge - Stapling unit hinges - Set of 2 |
| RB1-6461-000CN |
Holder - Damper holder - Front damper holder |
| RB1-6462-000CN |
Holder - Damper holder - Rear damper holder |
| 5021-0377 |
Kit - Manual Kit for 5000 C40, LaserJet 6P Series, DesignJet 450, DesignJet 430 |
| C4214-67901 |
Kit - Self Paced Training Kit for LaserJet 5Si Series,8000,8100 and 8150 |
| C4214-99021 |
Kit - LaserJet 8100 service manual bundle - Includes service manual supplement for paper-handling accessories |
| C4785-60516 |
Kit - Attachment kit - Attachment rod, bracket and cables |
| C4785-60519 |
Kit - Plastic parts kit - Contains two small bottom pullies, flat cable holder, three small and 13 larger white plastic rollers |
| C4785-60520 |
Kit - Cable kit - Includes interlock switch, head motor cable, flipper sensor, encoder, motor controller cables, ESD cable, and delivery head assembly flat cable |
| RY7-5045-000CN |
Kit - Kit Screws for HP 09998390001 |
| 92296E |
Label - LaserJet printer shipping labels - 8.47cm (3.33in) x 10.2cm (4.00in) labels - Six per sheet - 100 sheets per box |
| 92296F |
Label - LaserJet printer return address labels - 1.27cm (0.50in) x 4.45cm (1.75in) labels - 80 per sheet - 25 sheets per box |
| 92296G |
Label - LaserJet printer file folder labels - 1.69cm (0.67in) x 8.73cm (3.44in) labels - 30 per sheet - 25 sheets per box |
| 92296H |
Label - LaserJet printer labels for 3.5-inch diskettes - 7.00cm (2.75in) x 7.00cm (2.75in) labels - Nine per sheet - 70 sheets per box |
| 92296J |
Label - LaserJet printer labels for 5.25-inch diskettes - 3.81cm (1.50in) x 10.2cm (4.00in) labels - 12 per sheet - 70 sheets per box |
| 92296K |
Label - LaserJet printer full sheet label - A size (8.5 x 11-inches) label - One per sheet - 100 sheets per box |
| RB2-5342-000CN |
Label - 2000 sheet paper tray cassette size label |
| RS5-8676-000CN |
Label - Label for LaserJet 8100 Series, Mopier 320 Series, LaserJet 8150 Series |
| PA03002-C114FJ |
Lamp - Lower lamp - Front side of carrier unit |
| PA03002-C115FJ |
Lamp - Upper lamp - Lamp in upper portion of ADF unit |
| C4214-69003 |
Laser Scanner - Laser/scanner assembly |
| RG5-4344-000CN |
Laser Scanner - Laser/scanner assembly |
| XZ9-0379-000CN |
Latch - Door latch insert (Black) |
| C4785-60515 |
LED - Status LED display - With cable |
| PA03002-C126FJ |
LED - LED assembly - Status display with cable - Green LED that indicates when paper is correctly loaded in ADF |
| RB1-6692-000CN |
Lever - Paper sensing lever - Senses paper in face down delivery assembly |
| RB1-6693-000CN |
Lever - Paper height lever - Senses when face-down tray is full |
| RB1-6693-020CN |
Lever - Paper height lever - Senses when face-down tray is full |
| RB2-3713-000CN |
Limiter - Limiter Torque for HP LaserJet Printers. |
| C4787-60503 |
Lock - Shipping lock kit - For 8-bin and 5-bin mailboxes |
| RB1-6615-020CN |
Lock - Right fusing assembly lock - Locks fuser in place |
| RB1-6616-020CN |
Lock - Left fusing assembly lock - Locks fuser in place |
| RB1-7746-000CN |
Lock - Tray shipping lock clip - Secures paper tray during shipping |
| C4783-60101 |
Mailbox - 7-bin table top mailbox - Whole unit |
| C4783A |
Mailbox - 7-bin table top mailbox - Whole unit |
| C4787-60515 |
Mailbox - 5-bin mail box with stapler - Holds 2100 sheets of paper used with 5Si family, Mopier and 8000 printers |
| C4787-69506 |
Mailbox - 5-bin mail box with stapler - Holds 2100 sheets of paper used with 5Si family, Mopier and 8000 printers |
| C4787-69515 |
Mailbox - 5-bin mail box with stapler - Holds 2100 sheets of paper used with 5Si family, Mopier and 8000 printers |
| C4787A |
Mailbox - 5-bin mail box with stapler - Holds 2100 sheets of paper used with 5Si family, Mopier and 8000 printers |
| C3914-67902 |
Maintenance Kit - Maintenance kit - For 120 VAC - Replacement parts after 350K pages - Includes fusing assembly, eight feed/separation rollers, and transfer roller - Pick-up rollers are not included in this kit please order separately if needed |
| C3914-67906 |
Maintenance Kit - Maintenance kit - For 120 VAC - Replacement parts after 350K pages - Includes fusing assembly, eight feed/separation rollers, and transfer roller - Pick-up rollers are not included in this kit please order separately if needed |
| C3914-67907 |
Maintenance Kit - LaserJet 8100 series Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed |
| C3914-69004 |
Maintenance Kit - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - |
| C3914-69007 |
Maintenance Kit - Maintenance kit - For 120 VAC - Replacement parts after 350K pages - Includes fusing assembly, eight feed/separation rollers, and transfer roller - Pick-up rollers are not included in this kit please order separately if needed |
| C3914A |
Maintenance Kit - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - R77-1049-000cn |
| C3914A |
Maintenance Kit - Maintenance kit (120V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - R77-1049-000cn |
| C3915-67902 |
Maintenance Kit - Maintenance kit - For 220 VAC - Replacement parts after 350K pages - Includes Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit please order separately if needed |
| C3915-67906 |
Maintenance Kit - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed |
| C3915-67907 |
Maintenance Kit - Maintenance kit - For 220 VAC - Replacement parts after 350K pages - Includes fusing assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit please order separately if needed |
| C3915-69001 |
Maintenance Kit - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed |
| C3915-69004 |
Maintenance Kit - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit - Please order separately if needed |
| C3915-69007 |
Maintenance Kit - Maintenance kit - For 220 VAC - Replacement parts after 350K pages - Includes fusing assembly, eight feed/separation rollers, and transfer roller - NOTE: Pickup rollers are not included in this kit please order separately if needed |
| C3915A |
Maintenance Kit - Maintenance kit (220V) - Replacement parts after 350K pages includes, Fuser Assembly, 8 feed/separation rollers, and transfer roller |
| C6072-60301 |
Manual - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (English) |
| C3764-60505 |
Media Bin - Face-up paper output bin |
| C4783-69502 |
Media Bin - Face down bin assembly - One roller |
| C4785-60502 |
Media Bin - Face-down paper output bin - Smaller of the two types of trays |
| RG1-3836-000CN |
Media Bin - Face down bin assembly - One roller |
| RG1-3837-000CN |
Media Bin - Face down bin assembly - Two rollers |
| C4135A |
Memory - 4MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4136A |
Memory - 8MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4137A |
Memory - 16MB, 100-pin, 32-bit, 60nS, EDO DRAM DIMM memory module |
| C4140A |
Memory - 4MB, 100-pin SDRAM DIMM memory module |
| C4286A |
Memory - 2MB flash DIMM memory - Font storage device |
| C4287A |
Memory - 4MB flash DIMM memory - Font storage device |
| C4292A |
Memory - 8MB Traditional Chinese MROM DIMM - For LaserJet printers |
| C4293A |
Memory - 8MB simplified Chinese MROM DIMM - For LaserJet printers |
| C7842-67901 |
Memory - 8MB, 100-pin SDRAM DIMM memory module |
| C7842A |
Memory - 4MB, 100-pin SDRAM DIMM memory module |
| C7842AX |
Memory - 8MB, 100MHz SDRAM DIMM memory module |
| C7843-67901 |
Memory - 16MB, 100-pin SDRAM DIMM memory module (Part approaching End of Life, please contact HP for availability) |
| C7843A |
Memory - 16MB, 100-pin SDRAM DIMM memory module |
| C7845-67901 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| C7845A |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| C7846-67901 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C8530-67909 |
Memory - 8MB flash firmware ROM memory |
| C9680A |
Memory - 64MB, 100MHz SDRAM DIMM memory module |
| Q1887-67901 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q7707-67951 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7707AX |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7708-67951 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| C4781-60500 |
Module - AC power box - Holds AC recptacle, fuse holder, and four cable connections - Includes mounting clips |
| C3764-60507 |
Motor - Elevator stepper motor - Moves the delivery head assembly into position |
| C4785-60518 |
Motor - Transport belt motor - Includes fan |
| PA03002-C109FJ |
Motor - ADF motor unit - Drives ADF rollers |
| PA03002-C116FJ |
Motor - Carrier unit motor |
| Q5693-60531 |
Motor - Elevator stepper motor - Moves the delivery head assembly into position |
| RF1-4003-000CN |
Motor - Reversing mechanism motor |
| RH7-1350-000CN |
Motor - Paper input motor |
| RH7-5219-000CN |
Motor - Main motor for HP LaserJet 8100 Series |
| PA03002-C117FJ |
Optical Unit - Upper scanner portion of ADF unit - Scans page as it feeds through the ADF - Provides double sided copies |
| C4214-40029 |
Overlay - LaserJet 8100 control panel overlay (English) |
| C4214-40031 |
Overlay - LaserJet 8100 control panel overlay (Italian) |
| C4214-40042 |
Overlay - LaserJet 8100 control panel overlay (Spanish) |
| PA03002-C105FJ |
Pad - Document holding pad - Foam piece on bottom of flatbed cover that holds document to copier glass |
| PA03002-C122FJ |
Pad - Separation pad assembly |
| PA03002-C267FJ |
Pad - Junction PCA cover - Protects junction PCA |
| PA03002-C270FJ |
Pad - Front panel cable cover - Protects front panel cable |
| RF5-2703-000CN |
Pad - Separation pad - Tray 1 separation pad |
| C4780-69504 |
Paper - Paper pickup,moves Paper from Trays to Feeder Assembly, Paper pickup for HP LaserJet. |
| C4214-69009 |
PC Board - DC controller board assembly |
| C4265-67901 |
PC Board - Formatter board - Main Logic PCA |
| C4265-69001 |
PC Board - Formatter board - Main Logic PCA |
| C4785-60514 |
PC Board - Diagnostic LED display board - With cable |
| C4785-60539 |
PC Board - Mailbox contoller PCA |
| C4785-60543 |
PC Board - Mailbox contoller PCA |
| C4787-60514 |
PC Board - Stapling unit control board |
| J3111-69001 |
PC Board - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector;Click to order the functional equivalent: J4135-61001 |
| J3286-60002 |
PC Board - Card Fino for HP 207575-001 |
| J4135-61001 |
PC Board - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port |
| J4167-69001 |
PC Board - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector |
| PA03002-C252FJ |
PC Board - ADF unit lamp PCA |
| RB2-3667-000CN |
PC Board - Holder size PCA |
| RG1-3814-000CN |
PC Board - Bin full and interlock sensor board |
| RG1-3815-000CN |
PC Board - Sensor PCA - Empty bin sensor board |
| RG1-3816-000CN |
PC Board - Face-up bin full and sensor PCA |
| RG1-3817-000CN |
PC Board - LED PCA - Status panel LED display board |
| RG1-3853-060CN |
PC Board - Controller board - 7-bin tabletop mailbox controller PCA |
| RG5-1845-000CN |
PC Board - Paper size sensor board - Used to sense paper size in upper and lower paper trays |
| RG5-1845-020CN |
PC Board - Paper size sensor board - Used to sense paper size in upper and lower paper trays |
| RG5-1846-000CN |
PC Board - Switch/sensor board - Includes face down tray sensors, fusing delivery sensor and door switch |
| RG5-1860-000CN |
PC Board - Paper pickup board - Includes 8 photosensors |
| RG5-1884-000CN |
PC Board - Multipurpose paper tray board - Includes paper sensors PS1301 and PS1302 |
| RG5-2166-000CN |
PC Board - Sensor PCA - Paper quantity sensor PCA |
| RG5-2168-000CN |
PC Board - Sensor PCA - Paper size sensor PCA |
| RG5-3908-000CN |
PC Board - Paper deck PCA - Input tray controller PCA |
| RG5-4375-030CN |
PC Board - DC controller board assembly |
| RG5-4441-000CN |
PC Board - Front LED PCA - LED status display board |
| RG5-4442-000CN |
PC Board - Controller PCA - 2 x 500-SHEET input tray controller PCA |
| RG5-4442-030CN |
PC Board - Controller PCA - 2 x 500-SHEET input tray controller PCA |
| J3110A |
PC Board Interface - Ethernet 10Base-T (RJ-45) EIO network GENUINE HP JETDIRECT 600N internal print server PC board |
| J3111A |
PC Board Interface - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
| J3112A |
PC Board Interface - JetDirect 600N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J3113A |
PC Board Interface - JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot |
| J4135A |
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J4167A |
PC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J4169A |
PC Board Interface - JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| C4214-69017 |
Pickup Assembly - Paper pick-up assembly - Includes pick-up roller, feed and separation rollers |
| C4780-69505 |
Pickup Assembly - Moves Paper from Trays to Feeder Assembly, Paper pickup for HP LaserJet. |
| C4781-69505 |
Pickup Assembly - 2000 sheet paper tray paper pickup assembly - Not compatible with C3763A Input Tray |
| RG5-3843-000CN |
Pickup Assembly - 2000 sheet paper tray paper pickup assembly - Not compatible with C3763A and C3773A Input Tray |
| RG5-4330-000CN |
Pickup Assembly - Paper pickup assembly |
| RG5-4334-260CN |
Pickup Assembly - Paper pickup assembly - Includes pickup, feed and separation rollers |
| RG5-4410-090CN |
Pickup Assembly - Moves Paper from Trays to Feeder Assembly, Paper pickup for HP LaserJet. |
| RA2-2439-000CN |
Pin - Positioning pin |
| RF5-2556-000CN |
Pin - Positioning pin - Metal locating pins - Set of three |
| C3766-60505 |
Plate - Stapling Unit Back Plate - Covers rear of Stapling Unit |
| RA2-2500-000CN |
Plate - Support plate - Supports empty bin sensor PCA |
| RA2-2527-000CN |
Plate - Stopper plate - Limits travel of right cover |
| RA2-2541-000CN |
Plate - Motor cover - Reversing mechanism motor cover plate |
| RB1-6582-020CN |
Plate - Upper paper guide plate |
| RB1-6894-000CN |
Plate - Paper cassette size plate - Self adhesive label NOT included |
| RB2-3728-000CN |
Plate - Plate Hinge Front |
| RF1-4005-000CN |
Plate - Latch plate for HP LaserJet 8000 Series |
| RF5-1464-000CN |
Plate - Switch/sensor board plate - Shields switch/sensor PCA |
| RG5-3849-000CN |
Plate - Middle paper limit plate |
| RG5-3850-000CN |
Plate - Front paper reference plate - Front paper limit plate for 2,000-sheet feeder |
| RG5-4201-000CN |
Plate - Rear paper limit plate - Back paper limit plate for 2000 sheet feeder |
| 8120-6798 |
Power Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 100VAC in Japan) |
| 8120-6800 |
Power Cord - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
| 8120-6809 |
Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) |
| 8120-6810 |
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand) |
| 8120-6811 |
Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) |
| 8120-6812 |
Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
| 8120-6813 |
Power Cord - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) |
| 8120-6815 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| C4781-60501 |
Power Cord - Daisy chain` power cord - Has (M) C14 plug for power input and (F) C13 plug for power output - 250VAC, 10A - 71.5cm (28.1in) long |
| C4781-60502 |
Power Cord - Daisy chain` power cord - 18 AWG - Has C14 (M) plug for power input and C13 (F) plug for power output - 250VAC, 10A - 2.6m (8.4ft) long |
| RH2-5263-000CN |
Power Cord - Power cord (Gray) - 14 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in the USA and Canada) |
| C4214-69020 |
Power Supply - Low voltage power supply - For 120 VAC - Includes power switch, AC receptacle and DC power supply. |
| C4214-69021 |
Power Supply - High Voltage Power Supply Assembly |
| C4265-69006 |
Power Supply - Low voltage power supply - For 120 VAC - Includes power switch, AC receptacle and DC power supply |
| C4789A |
Power Supply - Power supply kit - For connecting a multi-bin mailbox to printer when printer is on a stand |
| RG5-4021-000CN |
Power Supply - Universal power supply |
| RG5-4300-000CN |
Power Supply - Low Voltage Power Supply (120V,60Hz) - Includes Power Low voltage power supply - For 120 VAC - Includes power switch, AC receptacle and DC power supply |
| RG5-4301-040CN |
Power Supply - Low voltage power supply - 240VAC, 50Hz - Includes power switch, AC receptacle and DC power supply |
| RG5-4306-050CN |
Power Supply - High voltage power supply assembly |
| RG5-4357-000CN |
Power Supply - Fusing assembly - For 100 VAC to 120 VAC operation - Bonds toner to paper with heat |
| RG5-4357-040CN |
Power Supply - Low voltage power supply (120v,60Hz) - Includes power switch, AC receptacle and DC power supply |
| RH3-2205-000CN |
Power Supply - Power supply PCA for 7-bin tabletop mailbox power supply |
| J3111-61001 |
Print Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
| J3112-69001 |
Print Server - JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 connector |
| J4167-61001 |
Print Server - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J6057-69001 |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J6057-69011 |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J6057A |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
| J7934-61001 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-61011 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69001 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69011 |
Print Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021 |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| C4785-80000 |
Pulley - Pulley Bottom for HP C3764A |
| C4785-80002 |
Pulley - Pulley Top CPL for HP C3764A |
| PA03002-C210FJ |
Pulley - Carrier tension pulley - Carrier belt idler pulley |
| PA03002-C205FJ |
Rail - Carrier rail - Carrier unit front support rail |
| RB1-6777-000CN |
Rail - Right side tray rail |
| RG5-4303-000CN |
Registration - Registration Assembly - Set of Rollers Before Toner |
| C4266A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| PA03002-C225FJ |
Ring - V2 HK ring - Special application spacer |
| RB1-6778-000CN |
Rod - Rod - Tray connector rod for springs |
| H3977-60001 |
Roller - Paper path roller kit - Contains four feed/separation rollers and 2 pickup rollers used in Paper Input Assembly - Also has MP/Tray1 pickup roller - Procedure requires service manual |
| PA03002-C120FJ |
Roller - Pick roller assembly |
| PA03002-C224FJ |
Roller - Exit idle roller |
| PA03002-C230FJ |
Roller - Drive roller shaft - Two used |
| RB1-9526-000CN |
Roller - Pickup roller - Used in tray 1 paper pickup assembly |
| RB2-2503-000CN |
Roller - Roller Feed for HP 09998390001 |
| RB2-3562-000CN |
Roller - Fuser pressure roller - Roller that provides pressure against heating roller in fuser asssembly |
| RF5-1834-000CN |
Roller - Feed/separation roller - Has a blue gear on one end and blue release tab on the other |
| RF5-1835-000CN |
Roller - Pickup roller assembly - Has attached Black plastic gear |
| RF5-1835BULKM |
Roller - Roller for HP C9737A |
| RF5-2708-000CN |
Roller - Pickup roller - Used in paper pickup assembly - 2 used |
| RF5-2951-000CN |
Roller - Roller Pickup for HP printers. |
| RF9-1394-020CN |
Roller - Transfer roller - Transfer charge roller (Black) |
| RG5-4303-030CN |
Roller - Registration assembly - Set of rollers before toner cartridge and after feed rollers - Has green handle with the number 2 printed on it |
| RG9-1361-020CN |
Roller - Roller : Transfer roller assembly - Includes transfer roller and guide unit with attached gear. |
| PA03002-C110FJ |
Sensor - Sensor assembly - Includes eight sensors, sensor cable and sensor mount assembly |
| PA03002-C207FJ |
Sensor - Home postion sensor - Senses when carrier unit is parked in the home position |
| RH7-7105-000CN |
Sensor - Surface temperature sensor - Fuser temperature sensor on opposite side of gear assembly of fusing assembly |
| RY7-5080-000CN |
Sensor - Photo sensor - Includes (one photo sensor) photo sensors PS 1,3,5 and 6 |
| WG8-0291-000CN |
Sensor - Photo sensor - Includes (one photo sensor) photo sensors PS 1,3,5 and 6 |
| C4214-60103 |
Service Manual - Manual/Software for Mopier 320 Series, LaserJet 8150 Series, LaserJet 8100 Series |
| C4266A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C4780-60100 |
Service Parts - Whole Unit for HP 09998390001 |
| C4780-80200 |
Service Parts - Carton: MIT for HP 09998390001 |
| C4785-00005 |
Service Parts - Metal Beam CPL for HP C3764A |
| C4785-60513 |
Service Parts - Shipping Material/Carton for Color LaserJet 8500 Series, LaserJet 8150 Series, Mopier 320 Series, LaserJet 8100 Series |
| C4785-80005 |
Service Parts - Pusher CPL for HP C3764A |
| C4787-69500 |
Service Parts - Stapling Unit - Includes Top Cover, Bed Assembly, and Board |
| C8530A |
Service Parts - 8MB Flash DIMM\TO ORDER SEE DESCRIP |
| PA03002-C211FJ |
Shaft - Carrier tension pulley shaft |
| PA03002-C202FJ |
Shield - RFI cover shield for PC boards |
| RB1-6749-000CN |
Shield - Internal cover for Tray 1 pickup assembly |
| RF5-2678-000CN |
Shield - Formatter board EMI shield |
| RB1-6473-000CN |
Shutter - Shutter White for HP C3166A |
| C6072-60304 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (German) |
| C6072-60305 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (French) |
| C6072-60306 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Spanish) |
| C6072-60307 |
Software - HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian) |
| RF1-3998-000CN |
Solenoid - Flipper solenoid |
| RG5-1875-000CN |
Solenoid - Face Up solenoid assembly |
| RH7-5223-000CN |
Solenoid - Reversing mechanism solenoid |
| PA03002-C213FJ |
Spacer - Carrier tension pulley spacer |
| RB2-3705-000CN |
Spacer - Latch spacer - Black plastic piece that latch engages |
| PA03002-C208FJ |
Spring - Frame ground spring |
| PA03002-C209FJ |
Spring - Idle roller coil spring - Provides tension for idle roller |
| PA03002-C212FJ |
Spring - Carrier spring - Provides tension for carrier belt pulley |
| PA03002-C240FJ |
Spring - Pick spring - Provides pressure for separation pad |
| PA03002-C245FJ |
Spring - ADF latch spring - Holds tension on ADF release latch |
| PA03002-C247FJ |
Spring - Front ADF lift spring |
| PA03002-C248FJ |
Spring - Rear ADF lift spring |
| PA03002-C249FJ |
Spring - Leaf spring - Idle roller leaf spring |
| PA03002-C266FJ |
Spring - Ground spring - Front panel frame ground spring |
| RA2-2513-000CN |
Spring - Tension spring - Provides tension for latch handle |
| RB1-6409-000CN |
Spring - Sensor arm spring - Holds tension on paper feeder sensor arm |
| RB1-6493-000CN |
Spring - Compression spring - Center support for left output bin |
| RB1-6509-000CN |
Spring - Torsion spring - Helps support left output bin tray |
| RB1-6558-020CN |
Spring - Sensor arm torsion spring - Holds tension on PIU paper sensor arm |
| RB1-7835-000CN |
Spring - Leaf spring - Retaining spring |
| RB2-3707-000CN |
Spring - Spring Torsion for HP 09998390001 |
| RS5-2499-000CN |
Spring - Tension spring - Front spring on metal slide |
| RS5-2561-000CN |
Spring - Tension spring for HP Color LaserJet 8550 |
| RS6-2072-000CN |
Spring - Compression spring - Holds tension on front support block |
| RS6-2073-000CN |
Spring - Compression spring - Holds tension on rear support block |
| C2975A |
Stand - HP LaserJet Printer Cabinet - For LaserJet 5Si family and 8000/8100 series printers - Supports the printer, and provides storage for supplies and accessories |
| C4784A |
Stand - 7-bin Tabletop Mailbox Stand - Wheeled stand that allows 7-bin tabletop mailbox to be used when printer is mounted on 2 x 500 or 2000 sheet input - For LasetJet 8000/8100 series printers |
| C4787-60500 |
Stapler - Stapling Unit - Includes Top Cover, Bed Assembly, and Board |
| C4787-69513 |
Stapler - Stapling unit - Includes top cover, bed assembly, and board |
| RG5-4204-000CN |
Status Panel - LED display - Status display with holder and cable |
| PA03002-C226FJ |
Stop - Document cover rubber stop |
| RB1-6427-000CN |
Stop - CG stopper - Toner cartridge guide stop - Holds toner cartridge in place |
| RB1-6783-000CN |
Stop - Tray stop - Right side tray stopper - Attached to right rear side of Tray 2 and 3 - Blue plastic piece |
| RF5-2002-030CN |
Stop - Paper length stop |
| RB1-6484-000CN |
Strap - Support strap - Supports door when open |
| PA03002-C227FJ |
Support - Optical unit tie down/hold-down bracket |
| RB2-3503-000CN |
Support - Shaft holding block - Front registration roller support |
| RB2-3504-000CN |
Support - Shaft holding block - Rear registration roller support |
| RF5-2701-060CN |
Support - Access door struts - Attached to each side of diverter door assembly |
| RB1-7677-000CN |
Tab - HP Tab for Color_LaserJets |
| C4785-60507 |
Tape - Metallic tape and housing assembly - Narrow tape version used with the double belt transport belt system |
| C4785-60524 |
Tape - Metallic tape and housing assembly - Guides and holds the paper against the transport belt (Wide tape version used with the single belt transport belt system) |
| PA03002-C259FJ |
Tool - Lubrication applicator - Carrier unit rail lubricator |
| C4780A |
Tray - HP LaserJet 8000 and 8100 Series Optional 1000 (2 x 500) sheet paper trays (Trays 4 & 5) - Holds up to 1000 sheets of letter, legal, tabloid/ledger, A3, A4, B, or B4 size paper |
| C4781-69506 |
Tray - 2000 sheet paper tray (Tray 4) - Paper holder cassette ONLY |
| C4781A |
Tray - HP LaserJet 8000 8100 and 5Si Series Optional 2000 sheet paper tray (Tray 4) - Holds up to 2000 sheets of letter legal tabloid/ledger A3 A4 B or B4 size paper - Does NOT include paper handling controller board |
| C4785A |
Tray - 8 bin mail box - Holds 2600 sheets of paper - Used with 2000 sheet paper tray or printer cabinet |
| PA03002-C121FJ |
Tray - Output tray assembly - ADF output tray with flip-out paper support tray extender |
| PA03002-C263FJ |
Tray - ADF output tray extender - Flip-out tray extender |
| R98-1004-000CN |
Tray - Lower paper input tray (Tray 3) - 500 sheet capacity - For letter, legal, 11inch x 17inch (B-size), A4 (210MM x 297MM), A3 (297MM x 420MM) and B4 (257MM x 364MM) size paper |
| R98-1005-000CN |
Tray - Upper input paper tray (Tray 2) - 500 sheet capacity - For letter, legal, and A4 (210MM x 297MM) size paper |
| R98-1006-000CN |
Tray - Tray 5 assembly - Complete tray with identification label |
| R98-1007-000CN |
Tray - Tray 4 assembly - Complete tray with identification label |
| RA2-2408-000CN |
Tray - Bottom bin tray |
| RA2-2487-000CN |
Tray - Reversing output tray (Face-up) |
| RB1-6490-000CN |
Tray - Face-down output tray - At top of printer |
| RB1-6491-000CN |
Tray - Face-up output tray - At upper left side |
| RB2-3669-000CN |
Tray - Paper storage tray - Stores up to twenty pounds of paper |
| RG5-3845-000CN |
Tray - 2000 sheet paper tray (Tray 4) - Paper holder cassette ONLY |
| RG5-4329-000CN |
Tray - Multi-Purpose paper input tray (Tray 1) |
| C4166A |
Upgrade Kit - HP LaserJet MFP copy module upgrade kit - Contains the copy module, memory DIMM module, (for LaserJet 8100) software CD, copy connect card, and cable. |
| C4166B |
Upgrade Kit - HP LaserJet MAP copy module upgrade kit - contains the copy module, memory DIMM modules (one for LaserJet 8100 and one for LaserJet 8150), software CD, copy connect card, and cable. |
| PA03002-C241FJ |
Washer - Key washer for HP LaserJet 8150 Series |
Techical Help
View service parts