| C5367A-Absorber |
Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. |
| C5367A-AC_Adapter |
AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. |
| C5300-40027 |
Actuator - Push rod - Power switch actuator shaft (with button) |
| C5367A-Actuator |
Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). |
| C5365-69025 |
ADF - Replacement automatic document feeder assembly - Includes input tray, motors, interface cable, PC Board and all other parts of the ADF assembly |
| C5367A-ADF_Arm |
ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly. |
| C5367A-ADF_Feed_Assy |
ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly). |
| C5367A-ADF_Input_Tray |
Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit. |
| C5367A-ADF_Motor |
ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit. |
| C5367A-ADF_Output_Tray |
ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit, we will ship the entire ADF Assembly. |
| C5367A-ADF_Pad |
ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying. |
| C5367A-ADF_PC_BRD |
ADF PC Board - Control Board on the ADF unit |
| C5367A-ADF_Roller_Kit |
ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed. |
| C5367A-ADF_Scanner |
ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents. |
| C5367A-ADF_Sensor_BRD |
ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly |
| C5367A-ADF_Unit_Assy |
ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit. |
| C5367A-Arm_Delivery |
Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm |
| C5367A-Arm_Door |
Arm Door - Carriage access door sensor arm |
| C5367A-Arm_Pickup |
Arm Pick Up - Paper detection arm - for registration plate on picking up paper |
| C5367A-Arm_Plate |
Arm Plate - Lever arm - used to lift the pressure plate lifter |
| C5367A-Arm_Sensing |
Arm Sensing - Arm assembly senses paper in bottom tray |
| C5367A-Arm_Tension |
Arm Tension - Tension arm - maintains tension on carriage belt |
| C5367A-Battery |
Battery - Battery pack for hp printer |
| C2145-40058 |
Belt - Drive belt - For the print mechanism carriage assembly |
| C5300-40038 |
Belt - Drive belt - For the scanner carriage assembly |
| C5367A-Belt_ADF |
Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit |
| C5367A-Belt_Carriage |
Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod |
| C5367A-Belt_Duplex |
Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit |
| C5367A-Belt_Paper |
Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. |
| C5367A-Belt_Scanner |
Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents. |
| C5364-60326 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - English |
| C5364-60327 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - German |
| C5364-60328 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - French |
| C5364-60329 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Spanish |
| C5364-60330 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Italian |
| C5364-60331 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Danish |
| C5364-60332 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Swedish |
| C5364-60333 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Norwegian |
| C5364-60334 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Finnish |
| C5364-60335 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Dutch |
| C5364-60336 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Portuguese |
| C5364-60337 |
Bezel - Control panel bezel (Overlay) - Snaps on top of the control panel assembly - Korean |
| C5367A-Bezel |
Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel |
| C4602-40027 |
Bracket - Flex cable bracket / housing |
| J3263-40003 |
Bracket - Mounting bracket (plastic clip) - Holds the JetDirect print server module on the rear panel of the printer |
| C5367A-Bracket_Left |
Bracket Left - Left bracket - carriage rod adjustment bracket (left) |
| C5367A-Bracket_Right |
Bracket Right - Right bracket - carriage rod adjustment bracket (right) |
| C5367A-Bracket_Tension |
Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley |
| C5365-80612 |
Brush - Antistatic brush |
| C5876-80002 |
Brush - Antistatic brush |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2990A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 1.8m (6ft) long |
| C2991A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) (type A) to 36-pin (M) Centronics (type B) - 3.0m (10ft) long |
| C4602-80004 |
Cable - Head drive flex cable - 43.2cm (17in) long |
| C5364-60313 |
Cable - Ribbon cable - Has 10-pin (M) edge connectors - 69.9cm (27.5in) long |
| C5364-60314 |
Cable - Cable assembly - Has 9-pin (F) connectors - 10.7cm (4.2in) long |
| C5364-60316 |
Cable - Cable assembly - Has one 4-pin (M) connector and one 4-pin (F) connector - 25.4cm (10in) long |
| C5364-80301 |
Cable - Scanner trailing cable |
| C5365-80607 |
Cable - Cable assembly - 8-pin (F) molex connector to 8-pin (M) mini-DIN connector - 66cm (26in) long |
| C5367A-Cable_Carriage |
Cable Carriage - Cable assembly which connects the main logic board to the carriage motor |
| C5367A-Cable_Interface |
Cable Interface - Parallel cable - connects from your printer to computer via your parallel port. |
| C5367A-Cable_Mchnsm |
Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism |
| C5367A-Cable_Panel |
Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display. |
| C5367A-Cable_USB |
Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing. |
| C5367A-Cam |
Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position |
| C5367A-Cap_Lifter |
Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place. |
| C5876-60014 |
Carriage - Carriage assembly - Holds two print cartridges - Should be replaced only by trained experienced service personnel - Requires alignment after replacement |
| C5367A-Carriage_Assy |
Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. |
| C5367A-Carriage_Base |
Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base |
| C5367A-Carriage_Belt |
Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. |
| C5367A-Carriage_Cable |
Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). |
| C5367A-Carriage_Latch |
Carriage Latch - A-arm latch - retains latch over the printheads on the carriage |
| C5367A-Carriage_Latch_CVR |
Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. |
| C5367A-Carriage_Motor |
Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. |
| C5367A-Carriage_Only |
Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). |
| C5367A-Carriage_PC_BRD |
Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. |
| 51645A |
Cartridge - HP InkJet Crtg 45A Black Large NAM |
| 51645AA |
Cartridge - HP Inkjet Crtg 45A Black Large AP |
| 51645AC |
Cartridge - HP Inkjet Crtg 45A Black Large Can |
| 51645AE |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe) |
| 51645AL |
Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| 51645G |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA) |
| 51645GA |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific) |
| 51645GC |
Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada) |
| 51645GL |
Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America) |
| C1823A |
Cartridge - Tri-Color Ink Print Cartridge - Prints Approximately 475 |
| C1823AA |
Cartridge - HP Ink Crtg 23A Color AP |
| C1823AC |
Cartridge - Tri-color ink print cartridge - Prints approximately 475 pages based on 13.5% total density (4.5% for each colors) on a 8-inch by 10-inch print area (Canada) |
| C1823AE |
Cartridge - THP Ink Crtg 23A Color EUR |
| C1823AL |
Cartridge - HP Ink Crtg 23A Color LAR |
| C1823D |
Cartridge - HP 23 Tri-color InkJet cartridge - 30 ml - Prints approximately 640 color graphics pages (actual yield depends on specific use including images printed, printer, print settings and other factors)(North America) |
| C1823DA |
Cartridge - HP Ink Crtg 23D Large Color AP |
| C1823DC |
Cartridge - HP Ink Crtg 23D Large Color Can |
| C1823DE |
Cartridge - Tri-color ink print cartridge - prints approximately 360 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (europe) |
| C1823DL |
Cartridge - HP Ink Crtg 23D Large Color LAR |
| C1823G |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA) |
| C1823GA |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific) |
| C1823GL |
Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America) |
| C1823T |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA) |
| C1823TA |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific) |
| C1823TE |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe) |
| C1823TL |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America) |
| C6613AN |
Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C6618AN |
Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA) |
| C5367A-Chassis |
Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism |
| C5364-00313 |
Clip - Scanner rod retaining clip |
| C5364-40306 |
Clip - Ribbon cable retaining clip |
| C5365-40640 |
Clip - Serial cable retaining clip |
| C5367A-Clutch_ADF |
Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder |
| C5367A-Clutch_Feed |
Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit. |
| C5364-60324 |
Control Panel - Control panel assembly - Mounts to the front panel - Does NOT include the bezel or ribbon cable |
| C5367A-Control_Panel |
Control Panel - Control panel assembly - control buttons and display on top front of the unit. |
| C5300-40009 |
Cover - Screw head cover - Snap on cover which covers the recessed screw heads in front of the scanner copyboard (2 used) |
| C5300-60015 |
Cover - Document cover assembly - Lift-up scanner bed cover - Includes the cover, foam pressure pad, and hinge assembly |
| C5367A-Cover_Back |
Cover Back - Back cover of printer, it is usually removed to clear paper jams. |
| C5367A-Cover_Cartridge |
Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. |
| C5367A-Cover_Main |
Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. |
| C5367A-Deflector |
Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly |
| C5367A-Display |
Display - Status led display (LCD display assembly). |
| C5300-40014 |
Door - Pen cartridge door - Access door for changing the printer ink cartridges (Mounts on left end of the scanner) |
| C5367A-Door_Carriage |
Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open. |
| C5367A-Door_Cartridge |
Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. |
| C5367A-Door_Rear |
Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly. |
| C5367A-Drive_Assy |
Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. |
| C5367A-Drive_Assy_ADF |
Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs |
| C5367A-Duplexer |
Duplexer - Auto duplexer assembly - provides double sided printing capability |
| C5367A-Encoder |
Encoder - Encoder spring - provides tension for encoder strip |
| C5367A-Encoder_Disk |
Encoder Disk - Disk encoder - helps to provide position information of the paper |
| C5367A-Encoder_Strip |
Encoder Strip - Encoder strip - carriage position sensor reference |
| C5367A-Extender_ADF |
Extender ADF - Paper extension for the automatic document feeder (ADF) input tray |
| C5367A-Extender_Input |
Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths |
| C5367A-Extender_Output |
Extender Output - Paper exit tray extension |
| 3160-1068 |
Fan - Tubeaxial fan - 92mm x 92mm x 25.5mm thick, 38VDC, 2,893 RPM |
| C5367A-Fan_PC_BRD |
Fan PC Board - Fan to cool power supply unit |
| C5367A-Fan_Vaccum |
Fan Vaccum - Vacuum fan assembly |
| C5367A-Feed_Rollers |
Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk |
| C5367A-Feed_Rollers_ADF |
Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder. |
| C3828A |
Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS. |
| C3832A |
Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package |
| C3834A |
Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series |
| C3835A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C6051A |
Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series |
| C6053A |
Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series |
| C5300-80003 |
Filter - Fan filter - Mounts between the fan and fan spacer (in the fan gasket) |
| C5367A-Flag_ADF |
Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly |
| C5367A-Flag_Paper |
Flag Paper - OOPS flag - out of paper sensor |
| C5367A-Formatter |
Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector. |
| C5367A-Front_Panel |
Front Panel - Front panel assembly - includes lcd and actuator buttons |
| C1676-40159 |
Gasket - Fan mounting gasket - Holds the fan, fan filter, and spacer in place on the internal chassis |
| C4602-40013 |
Gear - PPR cluster gear |
| C5367A-Gear_Assy |
Gear Assembly - ADF gear assembly driven by ADF main motor |
| C5367A-Gear_Cluster |
Gear Cluster - Cluster gear, large gear on service station |
| C5367A-Gear_Double |
Gear Double - Transfer gear - has double gear attached on service station |
| C5367A-Gear_Main |
Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. |
| C5367A-Gear_Station |
Gear Station - Gears on shaft of spittoon station |
| C5367A-Glass_ADF_Window |
Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002. |
| C5300-00039 |
Glass Assembly - Scanner glass pane - Glass plate that documents to be scanned lay on |
| C5367A-Glass_Assy |
Glass Assembly - Main top copier glass assembly. |
| C2145-40118 |
Guide - Pre-guide (For envelopes) |
| C5367A-Guide_Paper |
Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken |
| C5367A-Hinge_Cvr |
Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge. |
| C5367A-Holder |
Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. |
| C4555-60067 |
Idler - Carriage belt idler wheel assembly - Includes: idler mount, pulley, ball bearing and idler axle |
| C5367A-Idler |
Idler - Scanner belt idler assembly - maintains scannter belt tension. |
| C5367A-Ink_DLVRY |
Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly |
| C5367A-Ink_Supply_Station |
Ink Supply Station - Ink supply service station (iss) assembly |
| C6049A |
Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series |
| C5364-60538 |
Kit - Self paced training kit for OfficeJet Pro 1150/1170/1175 series |
| C5300-40040 |
Knob - Scanner lock knob - Green knob and shaft assembly - Locks the scanner carriage assembly in place for shipping |
| C5367A-Lid_Cover_Assy |
Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document. |
| C5365-90000 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (English) |
| C5365-90001 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (French) |
| C5365-90004 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (Korean) |
| C5365-90006 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (Chinese) |
| C5365-90007 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (Spanish) |
| C5365-90009 |
Manual - C5365A, C5367A and C5369A HP OfficeJet Pro 1175C users guide (Thailand) |
| J3264-61001 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3264-69001 |
Module - External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and three parallel (DB-25) output connectors |
| J3265-61001 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J4102-61021 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| J4102-69022 |
Module - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| C2164-60045 |
Motor - Paper stepper motor assembly (does NOT include cable) |
| C4602-60004 |
Motor - Paper motor - Drives paper through printer |
| C4602-60022 |
Motor - Carriage motor - Provides power for carriage belt |
| C5364-69006 |
Motor - Carriage motor - Provides power for carriage belt |
| C5876-60066 |
Motor - Service station motor - Drives the service station assembly |
| C5367A-Motor_ADF |
Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly |
| C5367A-Motor_Carriage |
Motor Carriage - Carriage motor - motor that drives the carriage assembly |
| C5367A-Motor_Scanner |
Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned. |
| C5367A-MTR_Srvce_Station |
Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly |
| 6040-0990 |
Oil - Special lubricating oil - For carriage slider rod surface - (5cc oil) |
| C5367A-Overlay |
Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. |
| C5367A-Pad_ADF |
Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying. |
| C5367A-Pad_Tray |
Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing |
| C5300-40020 |
Panel - Front panel (N-shaped, plastic) - Covers the area from the bottom of the lower main chassis to the scanner base assembly |
| C5300-40022 |
Panel - Left side panel - Requires a 'dental pick' type tool to releas the top rear retaining tab |
| C5300-40023 |
Panel - Right side panel - Provides access to the service station assembly - Held in place with rear accessed screw |
| C5300-40024 |
Panel - Trim panel - Mounts on the bottom right side of the scanner base assembly |
| C5364-40316 |
Panel - Rear panel - Mounts to the rear of the lower main chassis |
| 51634Y |
Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets |
| 51634Z |
Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
| C1824A |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| C1825A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets |
| C1853A |
Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets |
| C5976A |
Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package |
| C5976B |
Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets |
| C5977A |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets |
| C5977B |
Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets |
| C6039A |
Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper |
| C6043A |
Paper - Paper (Photo) for DeskJet 1100 Series, DeskJet 1120 Series, DeskJet 1220 Series, DeskJet 1200 Series |
| C6587AN |
Paper - Printable Expressions all occasions card kit - Includes 20 greeting cards and envelopes, and a CD-ROM with 24 original pieces of art |
| C6817A |
Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets |
| C6955A |
Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets |
| C5364-69002 |
PC Board - Main logic board |
| C5367A-PC_BRD |
PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only |
| C5367A-PC_BRD_DC |
PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. |
| J3263-61011 |
PC Board Interface - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network |
| J3263-61031 |
PC Board Interface - Lan Adp Smo Kit Rohs |
| J3263-69011 |
PC Board Interface - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network |
| J3265-69001 |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T and ThinLAN) (10Base-2) input connectors and three parallel (DB-25) output connectors |
| J4101B |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
| J4102B |
PC Board Interface - External JetDirect LAN interface module with EtherTwist (10Base-T) connector |
| C5367A-Pinchwheel |
Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs |
| 8120-6809 |
Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) |
| 8120-6810 |
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand) |
| 8120-6811 |
Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) |
| 8120-6812 |
Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
| 8120-6813 |
Power Cord - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) |
| 8120-6814 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| 8120-6815 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| C5367A-Power_Cord |
Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module. |
| 0950-3350 |
Power Module - Wall mount power supply module (Leader Electronics 48130625HK) - 200VAC input, 48-52Hz - 13VDC output, 625mA (Hong Kong) |
| 0957-2340 |
Power Module - Wall mount power supply module - 120VAC input 60Hz power supply AC DC 15W UNIVERSAL ADAPTER Power module (wall mount)- Input voltage 100-240 VAC - Output voltage 12 VDC, 15 watts output, 1.0A - for Jet Direct power and other accessories. |
| 0957-2481 |
Power Module - Pwra brk uni 12vdc 15w |
| 5188-5676 |
Power Module - Power module (wall mount) - Input voltage 100VAC, 47/63Hz - Output voltage 13VDC, 800mA, 10.4 watts (for use in Japan) |
| 5188-6700 |
Power Module - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector |
| 9100-5176 |
Power Module - Pwer supply, 13v/300ma jpn |
| C5367A-Power_MDLE |
Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord |
| C5367A-Power_MDLE_Assy |
Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord |
| 0957-2194 |
Power Supply - Wall mount power supply module (MEI-AH ED12009) - 220VAC input, 47-63Hz - 13VDC output, 800mA, 10.4 watts (South Korea) |
| 0957-2229 |
Power Supply - Power module (wall mount)- Input voltage 220-250VAC, 47/53Hz - Output voltage 13VDC, 800mA, 10.4W (Worldwide) |
| 5188-5673 |
Power Supply - Universal AC power adapter - wide-range, 40c - Requires separate country-specific power cord with C7 connector Power supply module - 120VAC input, 60Hz - 12VDC output, 1.0A |
| C5364-60312 |
Power Supply - Power supply PC board |
| C5367A-Power_Supply |
Power Supply - Power supply board (internal pwr supply unit in the office machine). |
| C5367A-Power_Supply_BRD |
Power Supply Board - High voltage power supply board |
| C5367A-Print_Mchnsm |
Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. |
| J3263-69001 |
Print Server - External JetDirect 300X print server module (10Base-T and 100Base-T) - Connects between printer parallel port and LAN network |
| J4101-61011 |
Print Server - External JetDirect LAN interface module with EtherTwist 10Base-T/100BaseTX connector |
| C5367A-Pulley |
Pulley - Paper pick up tray motor pulley. |
| C5367A-Pulley_ADF |
Pulley ADF - ADF feeder motor pulley |
| 5183-5268 |
Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series |
| 5184-2833 |
Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions |
| C5367A-Repair_InkJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C5300-40036 |
Rod - Actuator rod - Vertical rod with cam - Actuates power switch on power supply board |
| C5364-20312 |
Rod - Scanner rod - Shaft that the scanner carriage assembly rides on |
| C5367A-Rod_Carriage |
Rod Carriage - Carriage rod - shaft that the carriage assembly rides on |
| C5367A-Rod_Scanner |
Rod Scanner - Scanner rod - shaft that the scanner assembly rides on |
| C2124-60116 |
Roller - Lower pinch roller |
| C5367A-Roller_ADF |
Roller ADF - Feeder ADF roller for picking up paper from ADF unit. |
| C5367A-Roller_Exit |
Roller Exit - Paper exit rollers - out put assembly. |
| C5367A-Roller_Pickup |
Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray |
| C5364-69011 |
Scanner - Scanner carriage assembly - Includes scanner bulb assembly |
| C5367A-Scanner |
Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C5367A-Scanner_Assy |
Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly. |
| C5367A-Scanner_Belt |
Scanner Belt - Scanner belt attaches from the scanner to the scanner motor. |
| C5367A-Scanner_Cable |
Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents. |
| C5367A-Scanner_Motor |
Scanner Motor - Scanner driving motor |
| C5367A-Scanner_Unit |
Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion. |
| C5367A-Sensor_ADF |
Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly |
| C5367A-Sensor_Exit |
Sensor Exit - Exit media sensor sv |
| C5367A-Sensor_Open |
Sensor Open - Door sensor assembly - open door sensor |
| C5367A-Sensor_Out |
Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray |
| C5367A-Sensor_Spot |
Sensor Spot - Spot sensor assembly is attached to the carriage assembly. |
| C5367A-Separator |
Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. |
| C5367A-Guide |
Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair. |
| C6659-10101 |
Service Manual - Service manual, technical support solutions guide and user's guide CD-ROM for print/scan/copy 370/380, OfficeJet 500/520/570/580/590/600/610/630/635/700/710/720/725, fax 910/920, OfficeJet Pro 1150/1170/1175, color copier 140/150 |
| C5300-60043 |
Service Station - Service station assembly - Does NOT include motor, tools, or instructions |
| C5300-60077 |
Service Station - Service station assembly with tool and instructions - Does NOT include motor |
| C5367A-Service_Station |
Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position |
| C5300-00022 |
Shield - Fan finger guard (shield) - Mounts on the back side of the fan and fan gasket |
| C5367A-SLED_Assy |
SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly |
| C5367A-Slider |
Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. |
| C5300-40017 |
Spacer - Fan spacer - Retains the fan filter and fan in the gasket |
| C5367A-Speaker |
Speaker - Speaker assembly - includes speaker cable. |
| C5367A-Spitton |
Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process |
| C4602-00012 |
Spring - Bias spring - Provides down pressure on the clutch actuator arm |
| C5367A-Spring_Cmprsn |
Spring Compression - Compression spring - on pulley wedge, for carriage belt tension |
| C6822A |
Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C6823A |
Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet |
| C2145-00042 |
Stiffener - Encoder stiffener - Prevents oscillation of encoder strip |
| C5365-40642 |
Stop - Paper length adjustment stop - Mounts on the left rear side of the ADF paper input slot |
| C2145-80016 |
Strip - Encoder strip - Carriage position sensor reference |
| 0460-2555 |
Tape - Scanner ESD tape - 1/2 inch wide by 72 yards long - Adhesive backed polyester film - Used to cover the scanner aperture after scanner bezel is removed - Keeps dust out of scanner |
| C5367A-Trailing_Cbl |
Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board. |
| C5364-60339 |
Tray - Input/output paper tray assembly |
| C5365-60632 |
Tray - Input extender tray assembly |
| C5367A-Tray_Assy |
Tray Assembly - Paper input tray assembly for loading paper (bottom). |
| C5367A-Tray_Assy_CVR |
Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit. |
| C5367A-Tray_Base |
Tray Base - Tray base- bottom base of the paper input tray. |
| C5300-60013 |
Trim - Trim strip (border) - At right side of the scanner glass pane |
| C5300-60014 |
Trim - Trim strip (border) - In front of the scanner glass pane |
| C4555-60068 |
Turnaround Assembly - Turnaround assembly - Holds belt tension components in place |
| C5367A-Window |
Window - Top/front access door assembly - print cartridge access door window. |
| C4531-40016 |
Wing - Left wing - Holds printed document after being ejected - Part of the input/output paper tray assembly |
| C4531-40017 |
Wing - Right wing - Holds printed document after being ejected - Part of the input/output paper tray assembly |
View service parts