HP parts available for C6692A HP officejet r45 all-in-one printerC5870-80007 Absorber - Spittoon sponge - Absorbs excess ink from cartridges
C6692A-Absorber Absorber - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters.
C6692A-AC_Adapter AC Adapter - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached.
C6692A-Actuator Actuator - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm).
C6692A-ADF_Arm ADF Arm - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly.
C6692A-ADF_Feed_Assy ADF Feed Assembly - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly).
C6692A-ADF_Input_Tray Adf Input Tray - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit.
C6692A-ADF_Motor ADF Motor - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit.
C6692A-ADF_Output_Tray ADF Out Put Tray - ADF out put tray is where paper come out of ADF (automatic document feeder). For this unit, we will ship the entire ADF Assembly.
C6692A-ADF_Pad ADF Pad - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing scanning or copying.
C6692A-ADF_PC_BRD ADF PC Board - Control Board on the ADF unit
C6692A-ADF_Roller_Kit ADF Roller Kit - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan copy or faxed.
C6692A-ADF_Scanner ADF Scanner - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents.
C6692A-ADF_Sensor_BRD ADF Sensor Board - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly
C6692A-ADF_Unit_Assy ADF Unit Assembly - Complete replacement assembly unit for Officejet Copier top assembly only. This includes the ADF (automatic document feeder) for this unit.
C6409-40021 Adjuster - Carriage rod adjuster - Used to support and align the carriage rod (2 used) - This item should be replaced only by trained, experienced service personnel
C6692A-Arm_Delivery Arm Delivery - Paper sensing arm - for 'paper out' or delivering paper sensing arm
C6692A-Arm_Door Arm Door - Carriage access door sensor arm
C6692A-Arm_Pickup Arm Pick Up - Paper detection arm - for registration plate on picking up paper
C6692A-Arm_Plate Arm Plate - Lever arm - used to lift the pressure plate lifter
C6692A-Arm_Sensing Arm Sensing - Arm assembly senses paper in bottom tray
C6692A-Arm_Tension Arm Tension - Tension arm - maintains tension on carriage belt
C6409-00013 Backbone - BacKBone - Large metal item where the main logic PCA and the carriage drive motor are mounted - This item should be replaced only by trained, experienced service personnel
C6680-60059 Base - Scanner base assembly - Includes base and both ribbon cables
C6692A-Battery Battery - Battery pack for hp printer
C4557-40049 Belt - Carriage drive belt - Moves printhead side to side
C6680-80070 Belt - Scanner belt - Moves the scanner module back and forth under the scanner glass
C6692A-Belt_ADF Belt ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit
C6692A-Belt_Carriage Belt Carriage - Carriage belt - moves the carriage assembly across the carriage rod
C6692A-Belt_Duplex Belt Duplex - Duplex timing belt - small belt that goes on the duplexer unit
C6692A-Belt_Paper Belt Paper - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly.
C6692A-Belt_Scanner Belt Scanner - Scanner assembly belt. belt moves the scanner while copying or scanning documents.
C6680-40050 Bezel - Scanner bezel - Top part of the scanner assembly - The scanner glass mounts in this bezel
C6680-60035 Bezel - Control panel bezel - Installed over the control panel - English
C6680-60037 Bezel - Control panel bezel - Installed over the control panel - French
C6692A-Bezel Bezel - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel
C2145-00037 Blade - ESD blade for HP DeskJet 870C Series
C4557-40128 Brace - Left backbone brace - Provides support for backbone
C4557-40130 Brace - Left wall brace - Provides support for left wall
C5870-40020 Brace - Right backbone brace - Installed on right side of printer base to provide support for backbone
C5870-00010 Bracket - Paper motor mounting bracket
C6692A-Bracket_Left Bracket Left - Left bracket - carriage rod adjustment bracket (left)
C6692A-Bracket_Right Bracket Right - Right bracket - carriage rod adjustment bracket (right)
C6692A-Bracket_Tension Bracket Tension - Belt tension bracket - holds the carriage belt idler pulley
5063-1254 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 3.0m (9.8ft) long -- Mini Connector
5063-1255 Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long mini-connector.
C2946A Cable - 8120-8724 IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin high density IEEE-1284C (M) connector (type C) - 3.0m (9.8ft) long mini connector.
C2947A Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin high density IEEE 1284C (M) connector (type C) - 10m (33ft) long
C4557-60022 Cable - Cable assembly - An 11-pin (F) connector to two 3-pin (F) connectors and a 7-pin (F) connector - 36.8cm (14.5in) long
C4557-80075 Cable - Carriage assembly flex cable - 40.3cm (15.9in) long
C5870-60140 Cable - Cable assembly - 12-pin (F) connector, 5-pin (F) connector, and 7-pin (F) connector - 43.9cm (17.3in) long
C6680-60002 Cable - Scanner motor cable
C6680-60057 Cable - Ribbon cable - Has 10-pin (M) connectors - 71.8cm (28.3in) long
C6680-80002 Cable - Ribbon cable - Has 26-pin (M) edge connectors - 15.5cm (6.1in) long
C6680-80003 Cable - Centronics parallel interface cable - 25-pin (M) with thumbscrews to 36-pin Centronics (M) - 2m (6.6ft) long miniconnector
C6680-80010 Cable - Cable assembly - 16-pin (F) connector to 34.9cm (13.8in) cable with 3-pin (F) connector, 56.6cmn (22.3in) cable with 3-pin (F) connector, 59.4cm (23.4in) cable with 7-pin (F) connector, and 61cm (24in) cable with 5-pin (F) connector
C6680-80050 Cable - Scanner module trailing cable - Has 20-pin (M) edge connectors - 42.9cm (16.9in) long
C6692A-Cable_Carriage Cable Carriage - Cable assembly which connects the main logic board to the carriage motor
C6692A-Cable_Interface Cable Interface - Parallel cable - connects from your printer to computer via your parallel port.
C6692A-Cable_Mchnsm Cable Mechanism - Cable assembly which connects the main logic board to the print mechanism
C6692A-Cable_Panel Cable Panel - Cable Panel assembly - includes ribbon cable this is the cable that connects to the control panel or display.
C6692A-Cable_USB Cable USB - This interface cable is the standard 2.0 usb cable that connects to your printer and computer for printing.
C4557-40034 Cam - Drawer cam - Short, spring loaded lever attached to the base of the wing frame - Used to draw input tray into position
C6409-40040 Cam - Pick cam - Controls pressure plate and lever
C6692A-Cam Cam - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position
C6692A-Cap_Lifter Cap Lifter - These lifter caps hold the pressure plate lifter and the kicker spring in place.
C6409-40031 Carriage - Ink cartridge carriage
C6409-60003 Carriage - Ink cartridge carriage assembly - This item should be replaced only by trained, experienced service personnel
C6692A-Carriage_Assy Carriage Assembly - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider.
C6692A-Carriage_Base Carriage Base - Carriage base or pre-loader assembly - mounted to bottom of carriage base
C6692A-Carriage_Belt Carriage Belt - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting.
C6692A-Carriage_Cable Carriage Cable - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side).
C6692A-Carriage_Latch Carriage Latch - A-arm latch - retains latch over the printheads on the carriage
C6692A-Carriage_Latch_CVR Carriage Latch Cover - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle.
C6692A-Carriage_Motor Carriage Motor - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement.
C6692A-Carriage_Only Carriage Only - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly).
C6692A-Carriage_PC_BRD Carriage PC Board - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it.
51645A Cartridge - HP InkJet Crtg 45A Black Large NAM
51645AA Cartridge - HP Inkjet Crtg 45A Black Large AP
51645AC Cartridge - HP Inkjet Crtg 45A Black Large Can
51645AE Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Europe)
51645AL Cartridge - Black print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)
51645G Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area (USA)
51645GA Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Asia Pacific)
51645GC Cartridge - Black print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Canada)
51645GL Cartridge - HP 45 Economy Black InkJet Print Cartridge - Prints approximately 415 pages based on 5% density on a 8-inch by 10-inch print area (Latin America)
C1823A Cartridge - Tri-Color Ink Print Cartridge - Prints Approximately 475
C1823AA Cartridge - HP Ink Crtg 23A Color AP
C1823AC Cartridge - Tri-color ink print cartridge - Prints approximately 475 pages based on 13.5% total density (4.5% for each colors) on a 8-inch by 10-inch print area (Canada)
C1823AE Cartridge - THP Ink Crtg 23A Color EUR
C1823AL Cartridge - HP Ink Crtg 23A Color LAR
C1823D Cartridge - HP 23 Tri-color InkJet cartridge - 30 ml - Prints approximately 640 color graphics pages (actual yield depends on specific use including images printed, printer, print settings and other factors)(North America)
C1823DA Cartridge - HP Ink Crtg 23D Large Color AP
C1823DC Cartridge - HP Ink Crtg 23D Large Color Can
C1823DE Cartridge - Tri-color ink print cartridge - prints approximately 360 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (europe)
C1823DL Cartridge - HP Ink Crtg 23D Large Color LAR
C1823G Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA)
C1823GA Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific)
C1823GL Cartridge - Tri-color ink economy print cartridge - Prints approximately 180 pages based on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America)
C1823T Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (USA)
C1823TA Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Asia/Pacific)
C1823TE Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Europe)
C1823TL Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch by 10-inch print area (Latin America)
C6613AN Cartridge - Black print cartridges (high capacity) - (two-pack of 51645A) each prints approximately 840 pages based on 5% density on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)
C6618AN Cartridge - Tri-color ink cartridges (two-pack of C1823D) - Each prints approximately 360 pages on 13.5% total density (4.5% for each color) on a 8-inch (20.3cm) by 10-inch (25.4cm) print area (USA)
C5870-00006 Channel - Width adjust channel
C6680-40020 Chassis - Middle chassis - Covers printer mechanism and provides the mounting platform for the scanner/control panel assembly
C6692A-Chassis Chassis - Chassis assembly - the large plastic item that forms the base of the print mechanism
C4557-00043 Clip - Paperclip - Holds upper paper guide pinch rollers in place
C5870-00002 Clip - Service station ESD grounding clip
C6692A-Clutch_ADF Clutch ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder
C6692A-Clutch_Feed Clutch Feed - Clutch unit resposible for unit picking up paper from the pick up unit.
C6680-60082 Control Panel - Control panel (Keypad) assembly - Does NOT include cable
C6692A-Control_Panel Control Panel - Control panel assembly - control buttons and display on top front of the unit.
C5870-40016 Cover - Service station bonnet - Top cover of the spittoon - Has cutout for pallet/link assembly
C6680-40100 Cover - Top cover (Document cover) - Does not include foam pad
C6680-60027 Cover - Top cover (Document cover) assembly - Includes cover, foam pad, and hinge
C6692A-Cover_Back Cover Back - Back cover of printer, it is usually removed to clear paper jams.
C6692A-Cover_Cartridge Cover Cartridge - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves.
C6692A-Cover_Main Cover Main - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off.
C6692A-Deflector Deflector - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly
C6692A-Display Display - Status led display (LCD display assembly).
C4557-40026 Door - Output door - Separates output media from input media
C6680-60014 Door - Pen access door assembly - Lift up access door for changing print cartridges - Includes door and latch
C6680-60065 Door - Rear paper jam cleanout door assembly
C6680-60070 Door - Rear cleanout door assembly kit - Paper jam cleanout door
C6692A-Door_Carriage Door Carriage - Main front access door - covers the top of the printer and provide access to the carriage when open.
C6692A-Door_Cartridge Door Cartridge - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door.
C6692A-Door_Rear Door Rear - Rear cleanout door assembly - rear paper jam clean out door assembly.
C6692A-Drive_Assy Drive Assembly - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring.
C6692A-Drive_Assy_ADF Drive Assy ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs
C6692A-Duplexer Duplexer - Auto duplexer assembly - provides double sided printing capability
C4557-80019 Encoder - Paper motor encoder disk
C6692A-Encoder Encoder - Encoder spring - provides tension for encoder strip
C6692A-Encoder_Disk Encoder Disk - Disk encoder - helps to provide position information of the paper
C6692A-Encoder_Strip Encoder Strip - Encoder strip - carriage position sensor reference
C6692A-Extender_ADF Extender ADF - Paper extension for the automatic document feeder (ADF) input tray
C6692A-Extender_Input Extender Input - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths
C6692A-Extender_Output Extender Output - Paper exit tray extension
C6692A-Fan_PC_BRD Fan PC Board - Fan to cool power supply unit
C6692A-Fan_Vaccum Fan Vaccum - Vacuum fan assembly
C6692A-Feed_Rollers Feed Rollers - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk
C6692A-Feed_Rollers_ADF Feed Rollers ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder.
9170-1655 Ferrite Assembly - Ferrite core for HP OfficeJet K60
9170-1821 Ferrite Assembly - Ferrite core - Attaches to the control panel ribbon cable
C6680-80042 Ferrite Assembly - Ferrite core - Attaches to the scanner ribbon cable
C3828A Film - Film (Transparency) for OfficeJet R65 Series, PhotoSmart P1000, PhotoSmart P1100, OfficeJet G55 Series Transparency Film 200 SHEETS.
C3832A Film - Premium InkJet transparency film - A4 size (21.0cm x 29.7cm) - 20 sheets per package
C3834A Film - Film (Transparency) for DeskJet 1600 Series, DeskJet 2000 Series, DeskJet 800 Series, DeskJet 600 Series
C3835A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6051A Film - Film (Transparency) for DeskJet 1200 Series, DeskJet 500 Series, DeskJet 550C Series, DeskJet 850 Series
C6053A Film - Film (Transparency) for Color InkJet cp1700 Series, DeskJet 1180 Series, DeskJet 9300 Series, DeskJet 1280 Series
C5870-40024 Flag - OOPS flag - Media sensor - Mounts on the top right edge of the upper paper guide
C6680-40001 Flag - A4 flag - Media sensor - Mounts on the top left edge of the upper paper guide
C6692A-Flag_ADF Flag ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounths on the front frame of the ADF paper pickup assembly
C6692A-Flag_Paper Flag Paper - OOPS flag - out of paper sensor
C4557-40118 Foot - Rubber foot - Replacement rubber foot for the bottom of the printer (four used)
C6692A-Formatter Formatter - Formatter board assembly, this board communicates with your computer device and has MAC port connector.
C5870-40039 Frame - Wing frame - Chassis for in/out tray components
C6692A-Front_Panel Front Panel - Front panel assembly - includes lcd and actuator buttons
C4557-40007 Gear - Pick gear for HP Color Copier 170
C4557-40021 Gear - Feed roller idler gear
C4557-40079 Gear - Transfer gear (double gear)
C4557-40095 Gear - Encoder gear for HP Color Copier 260
C4557-40102 Gear - Feed roller cluster gear
C5870-40017 Gear - Cluster gear (large gear)
C6692A-Gear_Assy Gear Assembly - ADF gear assembly driven by ADF main motor
C6692A-Gear_Cluster Gear Cluster - Cluster gear, large gear on service station
C6692A-Gear_Double Gear Double - Transfer gear - has double gear attached on service station
C6692A-Gear_Main Gear Main - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller.
C6692A-Gear_Station Gear Station - Gears on shaft of spittoon station
C6692A-Glass_ADF_Window Glass ADF Window - Small glass piece used when scanning - copying - faxing with ADF feeder for this unit will ship Q5888-00002.
C6680-60020 Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel
C6692A-Glass_Assy Glass Assembly - Main top copier glass assembly.
C4557-40013 Guide - Rear paper guide - Guides media through rear of printer
C4557-40020 Guide - Lower guide - Platform for seperator peg, spring and pad
C4557-40121 Guide - Encoder disk guide
C5870-40037 Guide - Length adjuster - Media input length adjuster
C6409-40022 Guide - Upper paper guide - Guides media through paper path
C6409-40034 Guide - Left wall pusher - Pushes against left side of media to maintain correct edge alignment
C6410-40005 Guide - Width adjust (Purple) - Holds media against right wall of input tray
C6692A-Guide_Paper Guide Paper - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken
C6680-40101 Hinge - Hinge - For the top cover (Document lid) on the scanner
C6692A-Hinge_Cvr Hinge - Single cover end M-Hinge Hinge is for top cover supporting opening and closing of the cover. Most covers use 2 hinges this price includes 1pc Hinge.
C6692A-Holder Holder - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place.
C6680-60026 Idler - Scanner belt idler assembly - Maintains scanner belt tension
C6692A-Idler Idler - Scanner belt idler assembly - maintains scannter belt tension.
C6692A-Ink_DLVRY Ink Delivery System - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly
C6692A-Ink_Supply_Station Ink Supply Station - Ink supply service station (iss) assembly
C6049A Iron On Transfers - Iron-On Transfers for DeskJet 2500C Series, HP DeskJet D1400 Printer Series, DeskJet D24XX Series, DeskJet F4180 Series
C6680-60071 Kit - Control panel (Keypad) assembly kit - Does NOT include cable
C4557-40042 Latch - Plastic latch (Y-shaped)
C4557-60045 Latch - Cartridge latch (Black) - Holds black ink cartridge in place
C4557-60046 Latch - Cartridge latch (Color) - Holds color ink cartridge in place
C6680-40053 Latch - Latch (Wavy slot)
C4557-00037 Lever - Pressure plate lever - Transfers upward pressure from the separator lifter to the kicker
C5870-40022 Lever - Paper pusher - Small, spring loaded lever attached to pivot - Pushes against left side of paper to maintain right edge alignment
C6411-40006 Lever - Banner lever - Used to choose either single sheet paper or continuous feed (Banner) paper
C6692A-Lid_Cover_Assy Lid Cover Assy - Top glass copier cover. Lid that pressed document onto the glass for copying or scanning document.
C4557-40063 Lifter - Separator lifter - Used to lift the separator peg
C4557-40084 Link - Pivot link for HP Color Copier 270
C4557-40085 Link - Link pin for HP Color Copier 160
C6429-60025 Link - Kicker bar cam link (spring loaded)
6040-0788 Lubricant - Silicon Grease in a Syringe
C6688-60003 Module - Scanner module assembly - Moves along scanner slider rod to scan documents
C4557-60003 Motor - Carriage motor assembly (Includes pulley)
C5870-60004 Motor - Service station motor assembly - Includes PC board and gear
C6409-60004 Motor - Paper advance motor
C6680-60023 Motor - Motor and gear assembly - Drives scanner module - Does not include motor cable
C6692A-Motor_ADF Motor ADF - ADF motor unit - drives ADF rollers on the feeder assembly
C6692A-Motor_Carriage Motor Carriage - Carriage motor - motor that drives the carriage assembly
C6692A-Motor_Scanner Motor Scanner - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned.
C6692A-MTR_Srvce_Station Motor Service Station - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly
C6680-60068 NamePlate - Nameplate - OfficeJet R40 series logo
C6692-60030 NamePlate - Nameplate - C6692A OfficeJet R45 logo
C6692A-Overlay Overlay - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately.
C4557-80027 Pad - Length adjust pad (Poron) - Mounted under the fine length adjuster
C6692A-Pad_ADF Pad ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying.
C6692A-Pad_Tray Pad Tray - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing
C6426-60054 Pallet - Pallet/link assembly - Installed between spittoon and sled cap assembly - Mounting platform for the wiper and capping systems parts
C4557-40098 Panel - Paper tray left inner panel (left cheek cap) - Mounts between left wing and left outer panel
C4557-40099 Panel - Paper tray right inner panel (right cheek cap) - Mounts between right wing and right outer panel
C4557-40116 Panel - Paper tray left outer panel (left cheek) - Attaches to left edge of wing frame
C5870-40019 Panel - Paper tray panel (right cheek) - Attaches to the right edge of the wing frame
C6680-40021 Panel - Left side panel - Covers the left side of the print mechanism
C6680-40022 Panel - Right side panel - Covers the right side of the print mechanism
C6680-40026 Panel - Rear panel - Covers the back of the printer and the ground plane assembly
51634Y Paper - HP Premium Inkjet Paper - A size (8.5 x 11-inches) - 200 sheets
51634Z Paper - InkJet non-glossy LX paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package
C1812A Paper - Greeting card paper pack (White) - A size (8.5 x 11-inches) - Includes 20 sheets and 20 envelopes
C1820A Paper - Banner paper - A size (8.5 x 11-inches), 24 lb, perforated for easy separation - 100 sheets total per pack (5 stacks of 20 continuous sheets)
C1824A Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 500 sheets
C1825A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 500 sheets
C1853A Paper - Premium InkJet Heavyweight Paper - A4 size (21.0cm x 29.7cm) - Coated on both sides - 100 sheets
C3833A Paper - Premium Glossy InkJet Paper - A size (8.5 x 11-inches) - 10 sheets
C5976A Paper - Bright white InkJet paper - A size (8.5 x 11-inches) - 200 sheets per package
C5976B Paper - Bright White InkJet Paper - A size (8.5 x 11-inches) - 250 sheets
C5977A Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 200 sheets
C5977B Paper - Bright White InkJet Paper - A4 size (21.0cm x 29.7cm) - 250 sheets
C6039A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C6044A Paper - HP Photo Greeting Cards (Glossy) - A size (8.5 x 11-inches) - 10 scored half-fold glossy cards and envelopes
C6045A Paper - HP Photo Greeting Cards (Glossy) - A4 size (21.0cm x 29.7cm) - 10 scored half-fold glossy cards and envelopes
C6817A Paper - Brochure and flyer paper - Glossy on both sides - A size (8.5 x 11-inches), 98 brightness - 50 sheets
C6828A Paper - Greeting card paper pack (Ivory, Matte) - A size (8.5 x 11-inches) - Felt textured - Includes 20 sheets and 20 envelopes
C6831A Paper - HP Premium Plus Glossy Photo Paper - A size (8.5 x 11-inches) - 20 sheets
C6944A Paper - Premium Plus Paper (High Gloss) - 10.2cm (4in) x 15.2cm (6in) - 20 sheets
C6955A Paper - Professional Brochure and Flyer Paper (Matte) - A size (8.5 x 11-inches) - 50 sheets
C6979A Paper - Premium Photo Paper (Glossy) - A size (8.5 x 11-inches) - 50 sheets
C6983A Paper - Photo quality InkJet paper - With two sided semi-gloss finish - A size (8.5 x 11-inches) - 25 sheets per package
C7007A Paper - Photo Quality InkJet Paper (Matte) - With two sided matte finish - A size (8.5 x 11-inches) - 100 sheets
C7013A Paper - Colorfast photo paper - A size (8.5 x 11-inches) - 20 sheets per package
C7018A Paper - Photo Greeting Cards (White, Matte) - A size (8.5 x 11-inches), half fold, pre-scored - Includes 20 cards and 20 envelopes
C7019A Paper - HP Textured Half-fold Greeting Cards (White) - A size (8.5 x 11-inches)
C7020A Paper - Scored Tri-fold Brochure Paper (Glossy) - A size (8.5 x 11-inches) - 100 sheets
Q2509A Paper - Paper (Semi-Glossy) for DesignJet 130 Series, DeskJet 1220 Series, Business InkJet 2600 Series, DeskJet 450 Series
Q7852A Paper - HP Delux Advance Glossy Photo Paper 25 sheets of A size HP Advanced glossy photo paper
C4557-40016 Paper Stacker - Kicker - Restacks paper in stack after top sheet is picked
C4557-60062 PC Board - Banner PCA and cable assembly
C6409-60200 PC Board - Paper encoder PCA - Controls operation of paper motor
C6409-60237 PC Board - Ink cartridge carriage PC board
C6680-60202 PC Board - Interconnect PC board
C6680-68002 PC Board - Main logic PC board
C6692A-PC_BRD PC Board - Ink cartridge carriage assembly pc board - includes carriage pc board only
C6692A-PC_BRD_DC PC Board DC - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board.
C5870-40029 Pin - Separator peg for HP DeskJet 895C
C6692A-Pinchwheel Pinchwheel - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs
C6409-40028 Plate - Belt Attachment Plate - Mounted to back of Ink Cartridge Carriage Assembly - Used to attach the Carriage Drive Belt
C6429-60016 Plate - Shift Plate Assembly - Five Plastic Gears Held in a Two
C6455-60057 Plate - Shift plate assembly - Five plastic gears held in a two piece plastic frame - Attaches to feedroller assembly
8120-6260 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for USA, Canada, Taiwan, Latin America, and Saudi Arabia)
8120-6261 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-6262 Power Cord - Power cord (Black) - 18 AWG, 3-wire, 1.0m (3.3ft) - Has straight (F) C13 receptacle (for 240VAC in Europe except for Denmark, Ireland, Switzerland)
8120-8878 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Argentina)
8120-8879 Power Cord - Power cord (Black) - 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in Australia)
8120-8880 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Chile)
8120-8881 Power Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark)
8120-8882 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240VAC in the United Kingdom, Hong Kong, Singapore, and Ireland)
8120-8883 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Israel)
8120-8884 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220V in Korea)
8120-8885 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland)
8120-8886 Power Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 240V in South Africa, Israel, and India)
8121-0564 Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India)
8121-1003 Power Cord - Power cord (Black) - 3-wire, 17 AWG, 1.0m (3.3ft) long - Has straight (F) C13 receptacle - Opt919 (For 220V in Israel)
C6692A-Power_Cord Power Cord - Power module power cord- wall outlet cable to power module only. does not include power module.
0950-3807 Power Module - Power module (worldwide/universal) - 100-240VAC input voltage, 50-60Hz - 18VDC output voltage, 40 watts - Requires a separate, detachable AC power cord with C13 connector
C6680-60079 Power Module - Power module kit with AC power cord
C6692A-Power_MDLE Power Module - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord
C6692A-Power_MDLE_Assy Power Module Assy - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord
C6692A-Power_Supply Power Supply - Power supply board (internal pwr supply unit in the office machine).
C6692A-Power_Supply_BRD Power Supply Board - High voltage power supply board
C6692A-Print_Mchnsm Print Mechanism - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables.
C6692A-Pulley Pulley - Paper pick up tray motor pulley.
C6692A-Pulley_ADF Pulley ADF - ADF feeder motor pulley
5183-5268 Recovery Kit - Recovery Kit for DeskJet 1200 Series, DeskJet 850 Series, DeskJet 1000 Series, DeskJet 1100 Series
5184-2833 Recovery Kit - Return kit - For returning defective Thermal InkJet (TIJ) 2.5 cartridges - Includes box and instructions
C6692A-Repair_InkJet Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available.
C4557-00024 Retainer - Ferrite retainer - Holds head drive flex cable ferrite
C4557-20026 Retainer - Felt retainer - Holds the lubricating felt to the side of the carriage
C6409-20004 Rod - Carriage rod - Shaft that the carriage assembly rides on - This item should be replaced only by trained, experienced service personnel
C6680-20070 Rod - Scanner slider rod - Scanner module moves along this rod
C6692A-Rod_Carriage Rod Carriage - Carriage rod - shaft that the carriage assembly rides on
C6692A-Rod_Scanner Rod Scanner - Scanner rod - shaft that the scanner assembly rides on
C4557-20002 Roller - Pinch roller - Provides downward pressure on media as it passes by upper paper guide
C4557-40015 Roller - Rear roller (Black) - Between paper and rear paper guide
C4557-60025 Roller - Pivot feed roller - Shaft with 4 hard rollers - Does not include other items such as gear or encoder
C5870-40030 Roller - Pivot assembly - Large plastic Item below the feed roller assembly - Picks and feeds media through print mechanism - Should be replaced only by experienced service personnel
C5870-60092 Roller - Pickup roller assembly - Shaft with large rollers, gear, and 2 bearings - Picks paper from paper input tray - Available for trade sales in Europe and Asia/Pacific - Available for authorized service centers only in USA
C6409-60037 Roller - Pivot feed roller assembly - Shaft with small rollers and paper encoder - This item should be replaced only by trained, experienced service personnel
C6426-60049 Roller - Pickup roller - Shaft with large rollers - Does not include other items such as gear or bearings
C6692A-Roller_ADF Roller ADF - Feeder ADF roller for picking up paper from ADF unit.
C6692A-Roller_Exit Roller Exit - Paper exit rollers - out put assembly.
C6692A-Roller_Pickup Roller Pickup - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray
C6692A-Scanner Scanner - Copier scanner (optical) assembly - includes scanner assembly only scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6692A-Scanner_Assy Scanner Assembly - Copier scanner & glass assembly - includes the chassis assembly scanner lens assembly (includes the charge coupled device (ccd)) the scanning lamp ADF analog processor board and ADF inverter board - major portion of the ADF main assembly.
C6692A-Scanner_Belt Scanner Belt - Scanner belt attaches from the scanner to the scanner motor.
C6692A-Scanner_Cable Scanner Cable - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents.
C6692A-Scanner_Motor Scanner Motor - Scanner driving motor
C6692A-Scanner_Unit Scanner Unit - Scanner unit includes the entire scanner base but not the ADF portion.
C6692A-Sensor_ADF Sensor ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly
C6692A-Sensor_Exit Sensor Exit - Exit media sensor sv
C6692A-Sensor_Open Sensor Open - Door sensor assembly - open door sensor
C6692A-Sensor_Out Sensor Out - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray
C6692A-Sensor_Spot Sensor Spot - Spot sensor assembly is attached to the carriage assembly.
C4557-60011 Separator - Separator pad for HP DeskJet 700 Series
C6692A-Separator Separator - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays.
C6692A-Guide Service Guide - Printer Reference Guide (not a service manual) - Contains information such as product information, operation overview, paper behavior, maintenance, ink safety, and removal / replacement of parts. This is not a service manual for technical repair.
C6680-10020 Service Manual - Service manual on CD-ROM for printer/scanner/copier 500 series, color copier 160/170/260/270 and OfficeJet R series
0515-2199 Service Parts - Screw T8 4-20x6mm,Plas
0515-2552 Service Parts - Screw,Plastic M4
0515-2849 Service Parts - Scr-M3x14 Taptite
0515-2873 Service Parts - Screw-Sidecase
0515-2898 Service Parts - Scr-M3x5
0515-2901 Service Parts - Scr-Tapping Assy
0515-2902 Service Parts - Screw-Tapping
0515-3002 Service Parts - Mech-Screw 2.5x0.45x6
C2145-60040 Service Parts - X Bias Spring Assy
C4557-20025 Service Parts - Pin-X3 Datum
C4557-40006 Service Parts - New# C5870-40031
C4557-60002 Service Parts - New Part#c6426-60049/Utg Pick Shaft Assy
C4557-60030 Service Parts - New#c6409-60200 Utg/Paper Encoder Pca
C4557-60086 Service Parts - New# C6426-60054 Pallet/Link
C5870-40031 Service Parts - Bearing-Feedroller
C5870-40051 Service Parts - Zassa
C6409-60002 Service Parts - Pca Crg
C6409-60038 Service Parts - Shift Plate Assy
C6409-60119 Service Parts - Order: C6429-60025
C6409-60135 Service Parts - Order C6409-60236
C6455-00011 Service Parts - Spring, Length Adjust
C6680-40140 Service Parts - Gr Plate
C6680-60021 Service Parts - Scn Module Assy
C6680-60028 Service Parts - New# C6680-60027 Foam Pad Assy
C6680-60029 Service Parts - New# C6680-60082 CONTROL PANEL
C6680-60060 Service Parts - Color Copy Target Rev B
C6680-60151 Service Parts - Pca, Inter Connect
C6680-60154 Service Parts - NEW# c6680-60197 MAIN PCA
C6680-60196 Service Parts - Wizard Main Pca
C6680-60197 Service Parts - Pca-Main
C6681-00001 Service Parts - Order: C6680-00020
C6681-40002 Service Parts - New# C6682-60014 Hinge Lower
C6681-60033 Service Parts - New# C6682-60033/Ay, Lift Plate
C6682-60024 Service Parts - New# C6683-60025/Nameplate R60
C6683-00020 Service Parts - Clip-Retainer Cable
C6685-60024 Service Parts - Left Wall Assy (Purple Paper Adj)
C6688A-UK3 Service Parts - Color Copier 170
C6690-69003 Service Parts - Cc 1xx Exchange Unit
C7281-60005 Service Parts - Control Panel, Psc500
C7281-60011 Service Parts - Control Panel, psc500
C6692A-Service_Station Service Station - Service station assembly - for conditioning the printheads when the carriage is in its home position
C4557-20027 Shaft - Cartridge latch shaft near top of carriage
C4557-40066 Shaft - Drive shaft with molded gears on each end
C4557-00038 Shield - Paper motor ESD shield
C6680-00041 Shield - Main PC board shield (Upper)
C6680-60058 Shield - Main PC board shield (Lower)
C4557-60013 Sled - Sled cap assembly - Top cover of the service station assembly - Includes print cartridge caps (gaskets which keep the cartridges from drying out when not printing)
C6692A-SLED_Assy SLED Assembly - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly
C5870-40036 Slider - Integrated slider for carriage assembly
C6692A-Slider Slider - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side.
C4557-40069 Snap - Cap snap - Installed between pallet/link assembly and sled cap assembly - Used to hold the cap spring
C4557-40150 Snap - Pivot snap - Used to hold pivot to pick feed roller shaft
C6692A-Speaker Speaker - Speaker assembly - includes speaker cable.
C5870-40014 Spitton - Spittoon base - The bottom of the service station assembly
C6692A-Spitton Spitton - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process
C2145-00033 Spring - ESD spring - Installed between ESD blade and carriage PC board
C4557-00009 Spring - Separator spring - Provides pressure between separator assembly and the center drive roller
C4557-00011 Spring - Drawer spring - Holds input drawer in place
C4557-00012 Spring - Right wing spring - Applies pressure to right wing during paper output
C4557-00017 Spring - Belt tension spring - Provides tension for carriage belt
C4557-00018 Spring - Encoder spring - Provides tension for encoder strip
C4557-00026 Spring - Cap spring - Provides upward pressure on the sled cap assembly to seal the parked print cartridges
C4557-00029 Spring - Left wall spring (front) - Holds left wall assembly in position
C4557-00030 Spring - Left wall spring (rear) - Provides pressure against media
C4557-00031 Spring - Paper length adjuster spring - Provides tension for paper input length adjuster
C4557-00033 Spring - Link spring - Provides tension to shaft of pick cam gear
C4557-00035 Spring - Paper pusher spring - Maintains alignment in paper tray
C4557-20003 Spring - Rear roller spring - Flexible axle for rear roller
C4557-20007 Spring - Pinch spring - Provides tension on upper paper guide
C4557-20009 Spring - Latch spring - Provides friction for the knob on the rear cleanout door assembly
C4557-20020 Spring - Envelope spring - Holds envelopes in position for picking
C4557-20024 Spring - Shifter spring - Provides tension on the pivot
C4557-20028 Spring - EOR tension spring - Maintains tension on wear strip
C5870-20002 Spring - Paper stacker (kicker) spring
C6409-00017 Spring - Wing torsion spring - Provides pressure on the wing during paper output
C6680-80020 Spring - Door spring - Connects to the pen access door and holds the door open when changing the print cartridges
C6680-80074 Spring - Idler spring - Provides tension for the scanner belt idler assembly
C6692A-Spring_Cmprsn Spring Compression - Compression spring - on pulley wedge, for carriage belt tension
C6822A Stickers - Round re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) round stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6823A Stickers - Square re-stickable InkJet stickers - HP bright white 6.35cm (2.5in) square stickers with 3M 'Post-it' adhesive - A size (8.5 x 11-inches) - 10 sheets per package with nine stickers per sheet
C6410-40006 Stop - Fine paper length adjuster (Purple) - Holds paper firmly against the back of the paper input tray
C4557-80001 Strip - Encoder strip - Clear strip with position marks - Used by the sensor in the carriage assembly to determine position
C5870-00004 Strip - Wear strip - Long, spring loaded strip mounted in top of backbone - Used to ensure smooth ink cartridge carriage motion
C6409-00008 Support - Upper paper guide support - Base for upper paper guide
C6680-40009 Support - Glass assembly support - Retains the scanner glass inside the scanner bezel
C6692A-Trailing_Cbl Trailing Cable - Trailing cable for scanner - cable connects from scanner to pc board.
C4557-60049 Tray - Paper input tray pressure plate
C5870-40028 Tray - Paper input tray base - Does not include the pressure plate assembly
C6680-60078 Tray - Paper input tray assembly kit (Complete - Purple) - Plugs into front paper output tray assembly - Entire assembly
C5870-60081 Tray Assembly - Paper input tray assembly (partial) - Includes only base of tray and pressure plate assembly
C6410-60005 Tray Assembly - Paper input tray assembly (complete) - Entire assembly - Purple
C6411-60004 Tray Assembly - Paper tray left side assembly (Left cheek assembly) - Includes left cheek, banner PCA and cable assembly, banner switch lever
C6692A-Tray_Assy Tray Assembly - Paper input tray assembly for loading paper (bottom).
C6692A-Tray_Assy_CVR Tray Assembly Cover - Tray cover - the top cover for the paper pick up tray unit.
C6692A-Tray_Base Tray Base - Tray base- bottom base of the paper input tray.
C4557-60109 Turnaround Assembly - Turnaround assembly - Provides carriage belt tension - Does not include spring
C4557-40068 Vent - Cap vent - For equalizing the print cartridge capping pressure
C4557-80002 Washer - Felt washer - Used to lubricate the carriage rod
C6692A-Window Window - Top/front access door assembly - print cartridge access door window.
C4557-40024 Wing - Left wing - Holds printed paper after being ejected
C4557-40025 Wing - Right wing - Holds printed paper after being ejected
C4557-60014 Wiper - Wiper assembly - Metal base with plastic wipers