| RB2-3004-000CN |
Arm - Release arm - Left side lifting plate release arm |
| RB2-3005-000CN |
Arm - Release arm - Right side lifting plate release arm |
| RB2-3009-000CN |
Arm - Lock Arm - Locks Rear Paper Length Adjustment Plate |
| RB2-3009-040CN |
Arm - Lock arm - Locks rear paper length adjustment plate |
| RB2-3010-000CN |
Arm - Paper sensor arm |
| RB2-6264-000CN |
Arm - Paper sensor arm - Flag for registration photosensor,(spring sold separately RB2-2843-000CN). |
| RB2-6310-000CN |
Arm - Paper sensor lever - Senses paper at pickup roller |
| RB3-0905-000CN |
Arm - Paper sensor arm - Flag for registration photosensor, spring sold separately RB2-2843-000CN |
| J6057-69001 |
Backbone - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69011 |
Backbone - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021 |
| RB2-3060-000CN |
Belt - Paper feed belt - Short/tiny belts in front of and on each side of middle belt of paper transfer assembly |
| RB2-6270-000CN |
Belt - Paper feed belt - Short/tiny belts in front of and on each side of middle belt of paper transfer assembly |
| RB2-6272-000CN |
Belt - Paper feed belt - Wide middle belt |
| RB2-6273-000CN |
Belt - Paper feed belt |
| RB2-2850-000CN |
Bushing - Upper delivery roller bushing |
| RB2-2895-000CN |
Bushing - Shaft bushing/retainer - Right side pickup roller support bushing |
| RB2-2896-000CN |
Bushing - Shaft bushing/retainer - Left side pickup roller support bushing |
| RB2-2897-000CN |
Bushing - Shaft bushing/retainer |
| RB2-2897-020CN |
Bushing - Shaft bushing/retainer |
| RB2-2926-020CN |
Bushing - Transfer roller bushing - Supports right side of transfer roller |
| RB2-2936-000CN |
Bushing - Coupler bushing - Supports largest drive gear coupler |
| RB2-2973-000CN |
Bushing - Support bushing |
| RB2-3043-000CN |
Bushing - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1) |
| RB2-3081-000CN |
Bushing - Feed roller bushing - Right side feed roller support |
| RB2-3475-000CN |
Bushing - Support bushing - Feeder drive shaft bushing |
| RB2-3487-000CN |
Bushing - Roller bushing - Right side feed roller bushing |
| RB2-6303-000CN |
Bushing - Feed roller bushing - Left side feed roller support |
| RB2-6470-000CN |
Bushing - Roller bushing - Left side feed roller bushing |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| 8121-0868 |
Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C6518A |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| RG5-4278-000CN |
Cable - Sensor cable for HP LaserJet 2100 Series |
| RG5-4280-000CN |
Cable - Relay cable - One connector to two connectors - Six wires |
| RG5-4281-000CN |
Cable - Frame ground cable - Ground connection to feed drive housing - Round crimp lug to push-on connector with green wire |
| RG5-5568-000CN |
Cable - Cable and guide assembly |
| RG5-5583-000CN |
Cable - Sensor cable - Cable for PS1305 - Paper detection |
| RG5-5598-000CN |
Cable - Paper-feed cable - Includes the interface cable from the engine controller PC board to the accessory paper tray connector and the engine controller PC board ground cable. |
| RH2-5423-000CN |
Cable - Flat ribbon cable that connects engine controller board to Formatter board (J912) |
| RH2-5427-000CN |
Cable - Flat cable - Connects to laser/scanner assembly |
| 140196A |
Cartridge - 96a yield black toner |
| 5184-5209 |
Cartridge - LaserJet 2100 and 2200 series toner cartridge (Ultra-Precise) - Prints approximately 5, 000 pages |
| 6R928 |
Cartridge - 96a yield black toner |
| C4096A |
Cartridge - LaserJet 2100 and 2200 series toner cartridge (Ultra-Precise) - Prints approximately 5, 000 pages |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| VS1-6174-006CN |
Connector - Feed drive assembly connector |
| RB2-2935-000CN |
Coupler - Gear coupler for HP LaserJet 2100 Series |
| RG9-1473-000CN |
Coupler - Coupling assembly - Engages drive gear assembly |
| RB2-3000-000CN |
Cover - Front cover - Front cover and pull handle for paper tray |
| RB2-3479-000CN |
Cover - 250 sheet feeder cover - Covers bottom of the front lower right corner |
| RB2-3480-000CN |
Cover - 250 sheet feeder drive cover - Covers bottom of the drive assembly - Located on the right side |
| RB2-3489-000CN |
Cover - Inner cover (Small Quartz Gray plastic cover) |
| RB2-6280-020CN |
Cover - Top cover assembly - Face-down output tray and toner cartridge access door |
| RG5-5545-040CN |
Cover - DIMM cover assembly - Right side cover - Includes I/O cover on right rear and optical filter cover on right front |
| RG5-5546-000CN |
Cover - Rear cover - Includes face-down output tray assembly |
| RG5-5549-000CN |
Cover - Left cover assembly - Includes power button and spring |
| RB2-2856-000CN |
Door - Toner cartridge access door |
| C7058-67908 |
Drive Assembly - Paper feeder drive assembly for 500 sheet tray |
| RG5-4391-080CN |
Drive Assembly - Paper feeder drive assembly - Includes Clutch, gear, and 27 tooth gear. |
| RG5-5562-050CN |
Drive Assembly - Printer drive assembly |
| RG5-5577-000CN |
Drive Assembly - Gear assembly - Drives paper transfer belt assembly |
| RB2-3036-000CN |
Extender - Tray 1 extender - Pull-out tray extension |
| RB2-3037-000CN |
Extender - Tray 1 extender - Flip-out paper extender |
| RH7-1463-000CN |
Fan - Cooling fan for HP LaserJet 2200 Series |
| RG5-4394-000CN |
Feeder - Feed roller assembly - Includes roller, holder and spring |
| RG5-4394-020CN |
Feeder - Feed roller assembly - Includes roller, holder and spring |
| C7067-67903 |
Firmware - Firmware DIMM kit - Upgrade for all LaserJet 2200`s |
| RB2-2950-000CN |
Flange - Spring spacer - Fits between the two drum clutch springs |
| RB2-2816-000CN |
Foot - Rubber foot - Non-slip replacement rubber foot |
| RB2-6297-000CN |
Foot - Rubber foot - Square self-adhesive rubber foot |
| RH3-8006-000CN |
Fuse - Fuse - 8A, 250V max |
| WD1-0268-000CN |
Fuse - Fuse - 15A, 250V max |
| C7058-69003 |
Fuser Assembly - Fusing roller assembly (For 220V to 240V operation) - Bonds toner to paper with heat |
| RG5-5559-000CN |
Fuser Assembly - Fusing Roller Assembly (For 100V to 120V Operation) - Bonds |
| RG5-5559-110CN |
Fuser Assembly - Fusing roller assembly (For 100V to 120V operation) - Bonds toner to paper with heat |
| RG5-5560-060CN |
Fuser Assembly - Fusing Roller Assembly (For 100V to 120V Operation) - |
| RG5-5569-110CN |
Fuser Assembly - Fusing roller assembly (For 220V to 240V operation) - Bonds toner to paper with heat |
| RB2-3040-000CN |
Gear - Gear - 26 tooth - Tray 1 pickup roller drive gear |
| RF5-2755-000CN |
Gear - Swing gear - Swing assembly includes upper cluster gear |
| RG5-4391-060CN |
Gear - Paper feeder drive assembly - Includes Clutch, gear, and 27 tooth gear. |
| RS6-0440-000CN |
Gear - Gear - 10 tooth - Mechanical connection between right and left side paper plates |
| RS6-0441-000CN |
Gear - Upper delivery roller drive gear - 15 tooth |
| RS6-0445-000CN |
Gear - Registration roller drive gear - 14 tooth |
| RS6-0446-000CN |
Gear - Gear '#5' - 201 tooth gear |
| RS6-0448-000CN |
Gear - Cluster gear '#11' - 17/68 tooth |
| RS6-0449-000CN |
Gear - Cluster gear '#10' - 25/41 tooth |
| RS6-0450-000CN |
Gear - Printer drive gear '#9' - 31 tooth |
| RS6-0451-000CN |
Gear - Printer drive gear '#8' - 26 tooth |
| RS6-0464-000CN |
Gear - Feed belt drive gear - 20 tooth |
| RS6-0495-000CN |
Gear - Paper feeder drive assembly Clutch, gear, and 27 tooth gear. |
| RS6-0497-000CN |
Gear - Cluster gear - 39/34 tooth |
| RS6-0498-000CN |
Gear - Gear - 45 tooth |
| RS6-0499-000CN |
Gear - Gear - 39 tooth |
| RS6-0500-000CN |
Gear - Gear - 17 tooth |
| RS6-0501-000CN |
Gear - Drive gear - 15 tooth |
| RF5-2755-020CN |
Gear Assembly - Swing gear - Swing assembly includes upper cluster gear |
| RG5-4156-000CN |
Gear Assembly - Cassette pickup gear assembly |
| RB2-2830-000CN |
Guide - Cartridge Guide - Right Side Toner Cartridge Guide |
| RB2-2830-020CN |
Guide - Cartridge guide - Right side toner cartridge guide |
| RB2-2831-020CN |
Guide - Cartridge guide - Left side toner cartridge guide |
| RB2-2944-000CN |
Guide - PCA guide - Holds extended I/O PC board |
| RB2-6357-000CN |
Guide - Entrance guide - Paper input guide to fusing assembly |
| RG5-5548-000CN |
Guide - Reverse guide assembly - Guides paper back into printer to print back side when in duplex mode. |
| RG5-5553-000CN |
Guide - Position guide assembly (Plate with drive gear and rollers) |
| RG5-5554-050CN |
Guide - Duplex feed guide assembly |
| RG5-5561-000CN |
Guide - Upper delivery guide - Has four separate rollers and springs |
| RB2-3041-000CN |
Hinge - Tray hinge - For the left side of the multi-purpose front input tray (tray one) |
| RB2-3042-000CN |
Hinge - Tray hinge - For the right side of the multi-purpose front input tray (tray one) |
| RB2-6249-000CN |
Hinge - Feed guide hinge |
| RB2-6405-000CN |
Hinge - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1) |
| RB2-6406-000CN |
Hinge - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1) |
| RB2-2947-000CN |
Holder - Pin holder - Holds drum drive clutch pin |
| RB2-3013-000CN |
Holder - Pad holder - Separation pad holder on front of tray |
| RB2-3485-000CN |
Holder - Roller holder for HP LaserJet 2100 Series |
| RF5-2609-000CN |
Holder - Contact holder - Anchors fusing assembly to chassis |
| RF5-3279-000CN |
Holder - Sensor lever holder |
| RB1-2190-000CN |
Hook - Pickup roller spring hook |
| C7058-67901 |
Kit - Hardware training kit for LaserJet 2200 - Includes service/support CD-ROM and service manual |
| C7064-69002 |
Laser Scanner - Laser/scanner assembly |
| RG5-5591-000CN |
Laser Scanner - Laser/scanner assembly |
| RB2-2836-000CN |
Lever - Paper sensor lever - Mechanical device that engages photo sensor PS504 |
| RB2-3474-000CN |
Lever - Paper sensor lever - Mechanical link to Photosensor PS2001 |
| H3978-60001 |
Maintenance Kit - LaserJet 2200 series Maintenance Kit (120V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads - Procedure requires use of service manual - Not for warranty use |
| H3978-60002 |
Maintenance Kit - Maintenance Kit (220V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads - Procedure requires use of service manual - Not for warranty use |
| H3978-69001 |
Maintenance Kit - LaserJet 2200 series Maintenance Kit (120V) - Includes fuser roller assembly, transfer roller assembly, Tray 1 and Tray 2 pickup rollers, Tray 1 and Tray 2 separation pads |
| 5851-1891 |
Manual - LaserJet quick reference service guide (monochrome) - Volume IV |
| C7058-90956 |
Manual - Manual for LaserJet 2200 Series, LaserJet 2400 Series |
| C7058-90958 |
Manual - LaserJet 2200 user guide (French) |
| C7058-90971 |
Manual - LaserJet 2200 user guide (Spanish) |
| C7058-90980 |
Manual - Manual for LaserJet 2200 Series |
| C7842-67901 |
Memory - 8MB, 100-pin SDRAM DIMM memory module |
| C7843-67901 |
Memory - 16MB, 100-pin SDRAM DIMM memory module (Part approaching End of Life, please contact HP for availability) |
| C7845-67901 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| C7846-67901 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q1887-67901 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q2449-67914 |
Memory - Firmware DIMM memory - 4MB Flash/16MB SRAM combo DIMM |
| Q7707-67951 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7708-67951 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| RH7-1458-000CN |
Motor - Main motor for HP LaserJet 2200 Series |
| RH7-1460-000CN |
Motor - Main motor for HP LaserJet 2200 Series |
| RH7-1461-000CN |
Motor - Reverse motor for HP LaserJet 2200 Series |
| RB2-3007-000CN |
Pad - Separation pad - Small rectangular rubber pad on front of metal lifting plate |
| RB2-3008-000CN |
Pad - Pad-SeparationSeparation pad - Moveable pad on front of Optional 250 sheet paper tray |
| RB2-6349-000CN |
Pad - Separation pad for Tray 2 Pad-SeparationSeparation pad - Moveable pad on front of Optional 250 sheet paper tray |
| RB2-6474-000CN |
Pad - 500-sheet separation pad - Small rectangular rubber pad on front of cassette arm - Not the one on metal lifting plate |
| RB9-0695-020CN |
Pad - Separation pad - Moveable pad on front of Optional 250 sheet paper tray (C4793A) |
| RF5-3272-000CN |
Pad - Separation pad assembly - Separation pad, holder and spring |
| RB2-3001-000CN |
Paper Cassette - Paper Cassette - Bare Paper Tray Frame |
| C4209-61002 |
PC Board - Formatter (Main Logic) board - For duplex capable printers |
| C4209-69001 |
PC Board - Formatter (Main Logic) board - For duplex capable printers |
| C7066-60001 |
PC Board - Formatter (Main Logic) board - For simplex printers only |
| J3111-69001 |
PC Board - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector;Click to order the functional equivalent: J4135-61001 |
| RG5-4277-000CN |
PC Board - Tray 3 controller board - Paper feed drive PCA |
| RG5-5563-050CN |
PC Board - Power supply board - For 100V-127V operation |
| RG5-5566-000CN |
PC Board - Engine controller PC board |
| RG5-5573-050CN |
PC Board - Power supply board - For 220-240V operation |
| WG8-5382-000CN |
PC Board - Sensor PC board - Small board with flag activated photosensor |
| WG8-5593-000CN |
PC Board - Sensor PC board - Small board with flag activated photosensor |
| WG8-5836-000CN |
PC Board - PHOTOINTERRUPTER Stapler Stacker |
| J3111A |
PC Board Interface - Ethernet 10Base-T/10Base2 and LocalTalk (RJ-45, BNC, LocalTalk) EIO network PCA |
| J4135A |
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| C7058-67903 |
Pickup Assembly - Duplex feed/Paper pickup kit |
| C7058-67907 |
Pickup Assembly - Duplex feed/Paper pickup kit - Includes duplex feed guide assembly and cassette paper pickup assembly |
| RB1-6133-000CN |
Pin - Hook spring anchor pin |
| RB2-2943-000CN |
Pin - Clutch pin - Holds drum drive clutch springs |
| RB2-2945-000CN |
Plate - Mount plate - Protective plate for extended I/O PCA |
| RB2-3003-020CN |
Plate - Rear end plate of paper cassette |
| RB2-3003-040CN |
Plate - Plate end - Movable end plate at back of Tray 2 paper cassette |
| RB2-3080-000CN |
Plate - Grounding plate - Electrical chassis ground connection |
| RB2-3481-000CN |
Plate - Solenoid plate for HP LaserJet 2100 Series |
| RF5-2599-000CN |
Plate - Upper lifting plate |
| RF5-2606-000CN |
Plate - Adjustable width plate - Right side paper width stop plate |
| RG5-4159-000CN |
Plate - Adjustable width plate - Left side paper width stop plate |
| 8120-6812 |
Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
| J3111-61001 |
Print Server - JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has one RJ-45, BNC, and 8-pin DIN connector |
| J4169-69001 |
Print Server - JetDirect 610N Internal Print Server (10Base-T and 100Base-TX) LAN Interface Board - Has one RJ-45 connector |
| J6057-69011 |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J6057A |
Print Server - JetDirect 615N internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector |
| J7934-61011 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934-69001 |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| J7934A |
Print Server - JetDirect 620N Ethernet Print Server, internal print server LAN interface board - 10Base-T and 100Base-TX - Plugs into peripheral EIO slot, has RJ-45 connector. |
| RG5-5562-000CN |
Printer Drive - Printer Drive Assembly - Gear Assembly on Right Side |
| RG5-5565-000CN |
Receptacle - Power receptacle - Power input receptacle and cable to power supply |
| C7064A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| C7058-67905 |
Roller - Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
| RB2-2849-000CN |
Roller - Face-down delivery roller - Lower rollers |
| RB2-2891-000CN |
Roller - Pickup roller assembly - Black and white `D` shaped pickup roller with a slot in the end of the shaft |
| RB2-2892-000CN |
Roller - Guide roller (Free spinning white plastic roller) - Mounts on the paper pickup drive shaft on each side of the pickup 'D' shaped roller |
| RB2-2900-000CN |
Roller - Pickup roller - MP/TRAY 1 pickup roller |
| RB2-3046-000CN |
Roller - Guide roller - Provides pressure against feed roller |
| RB2-3484-000CN |
Roller - Feed roller - Feed roller for sheet feeder - White plastic roller |
| RB2-3484-020CN |
Roller - Feed roller - Feed roller for sheet feeder - White plastic roller |
| RB2-3490-000CN |
Roller - Feed roller - Tray 3 feed roller |
| RB2-6302-000CN |
Roller - Feed roller - Shaft with two rollers - Feed roller for the paper cassette |
| RB2-6304-000CN |
Roller - Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
| RB2-6318-000CN |
Roller - Feed roller - Shaft with two rollers - Feeds paper from the duplexer into the registration assembly |
| RB2-6368-000CN |
Roller - Pressure roller - Applies pressure to paper as it feeds through the fusing roller |
| RB2-6369-000CN |
Roller - Pressure roller - Applies pressure to paper as it feeds through the fusing roller |
| RB2-6372-020CN |
Roller - Delivery roller - Feeds paper out of fusing assembly |
| RB2-6374-000CN |
Roller - Delivery roller - For upper delivery guide |
| RB2-6400-000CN |
Roller - Face-Down Delivery roller - Lower rollers - Four used |
| RG5-4128-000CN |
Roller - Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin |
| RG5-5541-000CN |
Roller - Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
| RG5-5542-000CN |
Roller - Delivery roller kit - Includes all face-down delivery roller assemblies, upper delivery roller supports, and roller drive gear |
| RG5-5542-050CN |
Roller - Face down delivery roller assembly - Middle two roller assemblies in center of top output bin |
| RG5-5555-020CN |
Roller - Feed roller assembly |
| RG5-5556-000CN |
Roller - Registration assembly - Registration shutter and roller with holder frame assembly |
| RG5-5560-070CN |
Roller - Fusing roller - (For 110V to 120V operation) - Includes heating element and fixing sleeve only |
| RG5-5570-070CN |
Roller - Fusing roller - (For 220V to 240V operation) - Includes heating element and fixing sleeve only |
| RG5-5581-000CN |
Roller - Transfer roller assembly - Includes left side bushing |
| RL1-0542-000CN |
Roller - Pickup roller assembly - Rubber roller on a short shaft with slots on the end - Does NOT include the two flanking hard plastic rollers |
| WG8-5364-000CN |
Sensor - Flag activated photosensor |
| WG8-5645-000CN |
Sensor - Flag activated photo-sensor |
| C7058-60118 |
Service Manual - HP Laser Jet LJ2200 series service and support CD-ROM |
| C7064A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| 9222-1185 |
Service Parts - 9222-1185 |
| RB2-2893-000CN |
Shaft - Drive shaft - Drives pickup roller |
| RB2-3073-000CN |
Shaft - Belt drive shaft 1 - Between wide middle belt and the two narrower rear belts - Transfers power from gear assembly |
| RB2-6268-000CN |
Shaft - Idler shaf for HP LaserJet 2200 Series |
| RB2-6269-000CN |
Shaft - Belt drive shaft 2 - Front of middle wide belt - Tiny drive belts attach on each end of this shaft |
| RB2-6274-000CN |
Shaft - Belt shaft 3 - Tiny idler shafts at back of narrow paper belts |
| RG5-5552-000CN |
Solenoid - Duplex solenoid assembly - Solenoid and clutch assembly to engage and disengage duplexer |
| RH7-5213-000CN |
Solenoid - Drive solenoid - Engages swing gear assembly |
| RH7-5270-000CN |
Solenoid - Solenoid (SL1908) - Tray 2 pickup assembly |
| RH7-5273-000CN |
Solenoid - Solenoid (SL2908) - Tray 1 pickup assembly |
| RH7-5286-000CN |
Solenoid - Drive solenoid - Engages swing gear assembly |
| RB2-2837-000CN |
Spring - Torsion spring - Provides tension for paper sensor lever |
| RB2-2843-000CN |
Spring - Torsion spring - Provides a small amount of back pressure for the paper sensor flag. (Flag sold separately RB2-6264-000CN). |
| RB2-2978-000CN |
Spring - Compression spring - Provides tension for upper delivery rollers mounted on upper delivery guide - 4 used |
| RB2-3012-000CN |
Spring - Leaf spring - Provides side tension for the paper input tray |
| RB2-3075-000CN |
Spring - Leaf spring - Chassis grounding spring |
| RB2-3478-000CN |
Spring - Leaf spring - Provides tension for drive shaft bushing |
| RB2-6271-000CN |
Spring - Contact spring - High voltage contact for transfer roller |
| RB2-6314-000CN |
Spring - Tension spring - Provides tension for duplexer release knob |
| RB2-6321-000CN |
Spring - Torsion spring - Provides tension for gear on the paper feed roller and gear for registration assembly |
| RC1-1009-000CN |
Spring - Compression spring - Provides electrical ground connection |
| RS6-2020-000CN |
Spring - Plate spring - Provides pressure for paper lifting plate |
| RS6-2021-000CN |
Spring - Pad spring - Provides tension for separation pad on front of paper tray |
| RS6-2022-000CN |
Spring - Compression spring - Provides tension for right side of transfer roller bushing |
| RS6-2025-000CN |
Spring - Tensioning spring |
| RS6-2030-000CN |
Spring - Tension spring for HP Color LaserJet 1500 Series |
| RS6-2035-000CN |
Spring - Plate spring - Provides tension for left side width plate |
| RS6-2061-000CN |
Spring - Clip spring - Provides tension for clip |
| RS6-2062-000CN |
Spring - Swing gear spring - Provides tension for swing gear assembly |
| RS6-2063-000CN |
Spring - Roller spring - Provides pressure for feed roller |
| RS6-2064-000CN |
Spring - Bushing spring - Provides tension for right side feed roller support bushing |
| RS6-2375-000CN |
Spring - Compression spring - Provides pressure for top output bin delivery roller assembly |
| RH7-6051-000CN |
Switch - Microswitch with lever activator |
| C4793A |
Tray - 250 Sheet Universal paper tray assembly (tray three) - Holds 250 sheets of letter, legal, Executive, A4, A5, or B5 ISO size paper |
| C7058-67902 |
Tray - Multi-Purpose tray kit - Includes drop down multi purpose input tray assembly, all four nameplates and the HP logo jewel |
| C7065A |
Tray - LaserJet 500 Sheet Universal paper tray (tray three) - Holds 500 sheets of Letter and A4 size paper -Includes the feeder base assembly with pickup roller and the paper cassette tray Executive, A4, A5, or B5 ISO size paper |
| R75-5009-000CN |
Tray - 500 Sheet Feeder and paper tray assembly - Holds 500 sheets of Letter and A4 size paper -Includes the feeder base assembly with pickup roller and the paper cassette tray (order C7065-67901) |
| R98-1003-000CN |
Tray - 250 Sheet Paper Tray - Adjusts for Letter, Legal, Exec, A4 - |
| R98-1003-150CN |
Tray - 250 sheet paper tray - Adjusts for letter, legal, Executive, and A4 paper |
| RG5-5580-060CN |
Tray - 250 sheet paper tray |
| RG5-5623-000CN |
Tray - 500 Sheet paper tray assembly - Holds 500 sheets of Letter and A4 size paper |
| C4793B |
Tray Assembly - 250 Sheet Universal paper tray assembly (tray three) - Holds 250 sheets of letter, legal, Executive, A4, A5, or B5 ISO size paper |
| C7065-67901 |
Tray Assembly - LaserJet 500 Sheet Universal paper tray (tray three) - Holds 500 sheets of Letter and A4 size paper -Includes the feeder base assembly with pickup roller and the paper cassette tray Executive, A4, A5, or B5 ISO size paper |
| C7065B |
Tray Assembly - LaserJet 500 Sheet Universal paper tray (tray three) - Holds 500 sheets of Letter and A4 size paper -Includes the feeder base assembly with pickup roller and the paper cassette tray Executive, A4, A5, or B5 ISO size paper |
| RG5-5576-000CN |
Tray Assembly - Multi-purpose paper input tray assembly (MP Tray, Tray one) |
| RB2-2949-000CN |
Washer - Gear washer for HP LaserJet 2100 Series |
Techical Help
View service parts