| RG5-6026-000CN |
Antenna - Antenna holder assembly - Process cartridge sensor assembly - Four used |
| RG5-6026-030CN |
Antenna - Antenna holder assembly - Process cartridge sensor assembly - Four used |
| RG5-6130-000CN |
Arm - Slide arm assembly - Mounts to the upper right front of the print engine frame assembly |
| RG5-6130-020CN |
Arm - Slide arm assembly - Mounts to the upper right front of the print engine frame assembly |
| RG5-6180-190CN |
Belt - Intermediate transfer belt assembly (ITB) |
| RG5-6040-050CN |
Bottle - Waste toner collection bottle assembly |
| RG5-5919-000CN |
Cable - Rear lower cable - Main lower cable from the DC controller board |
| RG5-5920-000CN |
Cable - Rear upper cable - Cable from DC Controller to many driver PC Boards |
| RG5-5925-000CN |
Cable - Fuser connecting cable assembly - Cable with large black main connector for Fuser Assembly |
| RG5-5925-020CN |
Cable - Fuser connecting cable assembly - Cable with large black main connector for fusing assembly |
| RG5-5930-000CN |
Cable - Print Cartridge Drive cable - From Toner Driver PCA to Toner Cartridge motors and motor rotation sensors |
| RG5-5930-020CN |
Cable - Print cartridge drive cable - From Toner Driver PCA to toner cartridge motors and motor rotation sensors |
| RG5-5932-000CN |
Cable - Fusing sensor cable assembly - Connects to Fuser sensor PC Board |
| RG5-5932-020CN |
Cable - Fusing sensor cable assembly - Connects to Fuser sensor PC Board |
| RG5-5937-000CN |
Cable - High voltage cable - Connects between the main power supply (J1) and the high voltage power supply (J201) |
| RG5-5938-000CN |
Cable - Process cartridge cable - Connects between the print driver board (J608) and the high voltage board (J202) |
| RG5-5939-000CN |
Cable - Toner cartridge cable - Cable between Print Driver PCA and Toner Driver PCA |
| RG5-5940-000CN |
Cable - High voltage cable - Connects between the DC controller board (J101) and the high voltage power supply assembly (J203) |
| RG5-5943-000CN |
Cable - Crossmember cable - This cable connects J1701R, J3015D, J3013, and J3085 at rear of printer |
| RG5-5952-000CN |
Cable - Fusing motor cable - Cable between DC Controller PC Board and Fuser motor M10 |
| RG5-5960-000CN |
Cable - ITB sensor cable assembly - On left side of ITB assembly drawer |
| RG5-5960-020CN |
Cable - ITB sensor cable assembly - On left side of ITB assembly drawer |
| RG5-5962-000CN |
Cable - Right rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board |
| RG5-5962-020CN |
Cable - Right rear cable - 20 pin connector cable on right rear of Print Cartridge Driver Board |
| RG5-5963-020CN |
Cable - Right rear cable 2 - Cable with eight connectors at right rear of printer from Toner Cartridge Driver PC Board |
| RG5-5966-000CN |
Cable - Post controller cable - Connects between the high voltage power supply (J210) and the post charging unit (J501) |
| RG5-5975-000CN |
Cable - Rear lower cable - From DC Controller board to Secondary Transfer/Registration clutches and sensors - J121 to J3022, J3025, J3026 and J3027 |
| RG5-6148-000CN |
Cable - Laser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA |
| RG5-6148-020CN |
Cable - Laser cable - Cable between each of the four laser/scanner assemblies and the DC controller PCA |
| RG5-6159-000CN |
Cable - Rear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover |
| RG5-6159-030CN |
Cable - Rear cable and holder assembly - Cable that runs from DC Controller board to both upper and lower paper length detection switches - Includes cover |
| RG5-6200-030CN |
Cable - Video board cable - Cable between main power supply and video controller PC Board |
| RG5-6200-03ACN |
Cable - Video board cable - Cable between main power supply and video controller PC Board |
| RG5-6200-050CN |
Cable - DC Controller Kit - Includes the cable that connects the low voltage power supply to the formatter and the flat cable that connects DC controller PCB to the formatter |
| RH2-5507-000CN |
Cable - Flat cable - Ribbon cable between DC Controller PCA and Print Driver PCA |
| RH2-5508-000CN |
Cable - Ribbon cable - Conntects between the toner controller board (J802) and the memory controller board (J1001) |
| RB2-7570-000CN |
Cleaner - Front cleaner support - Metal support for ITB cleaner assembly on front of printer |
| RG5-6039-000CN |
Cleaner - ITB CLEANER Assy |
| RG5-6041-070CN |
Cleaner - Intermediate Transfer Belt (ITB) cleaner assembly - Moves excess toner from ITB to catch tray assembly - Small blue handle to left of large green one |
| RG5-5779-000CN |
Connector - Jetlink connector - Connector between Tray 4 and printer engine |
| RG5-5779-030CN |
Connector - Jetlink connector - Connector between Tray 4 and printer engine |
| RG5-6192-020CN |
Connector - Pin holder unit - Low voltage connector for the Intermediate Transfer Belt (ITB) assembly - Provides connection to the fan and thermistor inside the ITB assembly |
| VS1-5057-005CN |
Connector - 5 pin connector - Connector between fan FM7 and Toner Driver PCA |
| VS1-6492-020CN |
Connector - 20 pin connector - Connector between color registration array and Toner Driver PCA |
| VS1-7177-005CN |
Connector - 5 pin connector - Connector between fan FM7 and toner driver PCA |
| VS1-7177-010CN |
Connector - 10 pin connector - Connector between temperature/humidity sensor, ITB sensor, right door switch and Toner Driver PCA |
| VS1-7207-020CN |
Connector - 20 pin connector - Connector between color registration array and toner driver PCA |
| RG5-6129-000CN |
Contact - High voltage contact holder assembly |
| RG5-6129-020CN |
Contact - High voltage contact holder assembly |
| RB2-7321-000CN |
Cover - Top cover - Right side top cover |
| RB2-7331-000CN |
Cover - Right front cover - Thin vertical plastic cover - Mounts on the right front of the printer |
| RB2-7332-000CN |
Cover - Top right cover - Cover on right side above Tray 1 - (Part approaching End of Life, please contact HP for availability) |
| RB2-7335-000CN |
Cover - Left front cover - Small vertical piece on left side of left cover assembly |
| RB2-7336-000CN |
Cover - Left upper cover assembly |
| RB2-7352-000CN |
Cover - Cover - Right side rear corner of printer cover |
| RB2-7444-000CN |
Cover - Transfer cable cover - Protects ITB and secondary transfer roller cables from ITB lift mechanism |
| RB2-7445-000CN |
Cover - Transfer roller assembly cover - Front cover of secondary transfer roller assembly |
| RB2-7531-000CN |
Cover - Rail cover - Fits over guide for left side of ITB assembly - protects ITB sensors |
| RF5-3555-000CN |
Cover - Fan hood - Rear fan and filter cover |
| RG5-6042-050CN |
Cover - Rear cover assembly - Rear cover of printer with air filters |
| RG5-6111-000CN |
Cover - Left rear cover assembly - Cover for left rear corner with power receptical opening |
| RG5-6112-030CN |
Cover - Top cover - Left side top cover - Display panel assembly attaches to this cover |
| RG5-6149-070CN |
Cover - Delivery cover assembly - Lower left door assembly - With face-up output roller and flapper/diverter |
| RG5-6149-100CN |
Cover - Left front cover assembly |
| RG5-6149-130CN |
Cover - Left front cover assembly |
| RG5-6151-000CN |
Cover - Delivery cover assembly - Left side cover of Delivery Feed assembly - Includes both fans - FM1 and FM6 |
| RG5-6151-060CN |
Cover - Delivery cover assembly - Left side cover of Delivery Feed assembly - Includes both fans - FM1 and FM6 |
| RG5-6149-000CN |
Delivery - Delivery cover assembly - Lower left door assembly - With face-up output roller and flapper/diverter |
| RG5-6108-000CN |
Door - Door assembly - Right side lower door assembly - Right side rear hinged door below upper ITB access door |
| RG5-6108-030CN |
Door - Door assembly - Right side lower door assembly - Right side rear hinged door below upper ITB access door |
| RG5-6113-000CN |
Door - Front door assembly - Right side |
| RG5-6113-030CN |
Door - Front door assembly - Right side |
| RG5-6114-020CN |
Door - Front door assembly - Left side |
| RG5-6114-040CN |
Door - Front door assembly - Left side |
| RG5-6182-050CN |
Door - Print image drum door - Door on front that covers all four print image drum cartridges |
| RG5-6015-000CN |
Drive Assembly - Registration drive assembly - Gearbox assembly for registration roller assembly |
| RG5-6015-030CN |
Drive Assembly - Registration drive assembly - Gearbox assembly for registration roller assembly |
| RG5-6018-000CN |
Drive Assembly - Fuser drive assembly - Includes the two support plates, drive gears, and 24VDC motor (M10) |
| RG5-6018-050CN |
Drive Assembly - Fuser drive assembly - Includes the two support plates, drive gears, and 24VDC motor (M10) |
| RG5-6018-070CN |
Drive Assembly - Fuser drive assembly - Includes the two support plates, drive gears, and 24VDC motor (M10) |
| RG5-6022-020CN |
Drive Assembly - Toner cartridge drive assembly - Print cartridge drive assembly - Includes toner cartridge sensors and drive motors M12 through M15 |
| RG5-6022-080CN |
Drive Assembly - Toner cartridge drive assembly - Print cartridge drive assembly - Includes toner cartridge sensors and drive motors M12 through M15 |
| RG5-6188-000CN |
Drive Assembly - Process cartridge drive assembly - Includes all eight developing and drum motors |
| RG5-6188-080CN |
Drive Assembly - Process cartridge drive assembly - Includes all eight developing and drum motors |
| RG5-6188-090CN |
Drive Assembly - Process cartridge drive assembly - Includes all eight developing and drum motors |
| RH7-1521-000CN |
Fan - Cooling fan - Fan that cools the delivery unit and scanner area - FM2 |
| RH7-1522-000CN |
Fan - Cooling fan - Fan that cools the fuser assembly and print cartridge area - FM4 |
| RH7-1522-020CN |
Fan - Cooling fan - Fan that cools the fuser assembly and print cartridge area - FM4 |
| RH7-1546-000CN |
Fan - Cooling fan - Delivery cover assembly fan - Two used, FM6 and FM1 |
| RH7-1546-020CN |
Fan - Cooling fan - Delivery cover assembly fan - Two used, FM6 and FM1 |
| RH7-1554-000CN |
Fan - Cooling fan - Fan FM3 - This fan is the right side fan of two fans located on upper right side of printer - Upper right fan |
| RH7-1554-040CN |
Fan - Cooling fan - Fan FM3 - This fan is the right side fan of two fans located on upper right side of printer - Upper right fan |
| RH7-1564-000CN |
Fan - Cooling fan - Fan FM7 - This fan is the left side fan of two fans located on upper right side of printer - Ozone fan |
| RH7-1564-020CN |
Fan - Cooling fan - Fan FM7 - This fan is the left side fan of two fans located on upper right side of printer - Ozone fan |
| RH7-1632-000CN |
Fan - Cooling fan - Fan that cools the delivery unit and scanner area - FM2 |
| RG5-6017-030CN |
Feeder - Face down delivery feed assembly - Feeds paper to face-down/top output tray |
| RG5-6017-080CN |
Feeder - Face down delivery feed assembly - Feeds paper to face-down/top output tray |
| RG5-6150-000CN |
Feeder - Delivery feed assembly - Moves paper to output tray after Fuser Assembly on left side of printer |
| RG5-6150-050CN |
Feeder - Delivery feed assembly - Moves paper to output tray after fusing assembly on left side of printer |
| RB2-7170-000CN |
Filter - Air Filter - Pull out air filter on rear cover |
| RB2-7206-000CN |
Filter - Ozone filter - Charcoal air filter on right side upper cover |
| RG5-6098-110CN |
Fuser Assembly - Fuser assembly - Bonds toner to paper with heat - This part covers both 110VAC and 220VAC machines |
| RG5-6098-160CN |
Fuser Assembly - Fuser assembly - Bonds toner to paper with heat. FIXING ASSY. |
| RG5-6098-190CN |
Fuser Assembly - Fuser assembly - 110VAC/220VAC - Bonds toner to paper with heat |
| RG5-6098-220CN |
Fuser Assembly - Fuser assembly - Bonds toner to paper with heat - This part covers both 110VAC and 220VAC machines |
| RB2-7281-000CN |
Ground - Grounding plate - Electrical ground plate on right side of ITB rear guide rail |
| RB2-7181-000CN |
Guide - Cleaner guide - Guides for ITB cleaner blade - 2 used |
| RF5-3545-000CN |
Guide - Front rail guide - Guide for left side of ITB assembly when facing ITB |
| RF5-3546-020CN |
Guide - Rear guide rail - Guide rail for right side of ITB assembly |
| RG5-6181-000CN |
Laser Scanner - Laser scanner assembly - Separate scanners used for each color tonner cartridge (four used) |
| RG5-6181-050CN |
Laser Scanner - Laser scanner assembly - Separate scanners used for each color tonner cartridge - Four used |
| RG5-6121-000CN |
Lever - Toner cartridge release lever assembly - Four used |
| RG5-6121-030CN |
Lever - Toner cartridge release lever assembly - Four used |
| RG5-6134-000CN |
Lever - Lever assembly - |
| RG5-6134-020CN |
Lever - Lever assembly - |
| RG5-6134-040CN |
Lever - Lever assy for HP Color LaserJet 9500 Series |
| RB2-7258-000CN |
Link - Holder lift link - Black plastic fuser assembly lock link |
| RF5-3502-000CN |
Link - Front link - Secondary transfer link arm - This is the one link that is not attached to the secondary tranfer assembly that moves with the big green handle |
| RF5-3502-020CN |
Link - Front link - Secondary transfer link arm - This is the one link that is not attached to the secondary tranfer assembly that moves with the big green handle |
| RG5-6146-000CN |
Link - Front transfer link assembly - Small plate with three gears and a spring loaded arm - Mounts in the interior upper front of the print engine frame assembly |
| RG5-6146-040CN |
Link - Front transfer link assembly - Small plate with three gears and a spring loaded arm - Mounts in the interior upper front of the print engine frame assembly |
| RG5-6147-000CN |
Link - Rear link unit - Small plate with three gears and a spring loaded arm - Mounts in the interior upper rear of the print engine frame assembly |
| RH7-1518-000CN |
Motor - Registration motor - Drives registration roller assembly - 24VDC - Motor M11 |
| RH7-1518-020CN |
Motor - Registration motor - Drives registration roller assembly - 24VDC - Motor M11 |
| RH7-1519-000CN |
Motor - Fuser drive motor - Drives fuser rollers, delivery roller and ITB cleaner - 24VDC |
| RH7-1519-030CN |
Motor - Fuser drive motor - Drives fuser rollers, delivery roller and ITB cleaner - 24VDC |
| RB2-7182-000CN |
Mount - Damper mounting block - Right side ITB door damper mounting bracket |
| RF5-3489-000CN |
Pad - Guide pad - Small pads on each side of separation pad - Help guide paper to pickup roller |
| RB2-7358-000CN |
Panel - Control panel - Insert on left side of control panel for 110V application |
| RG5-6115-030CN |
Panel - Display panel assembly - Control panel on front top of printer |
| RG5-7900-000CN |
Panel - Display panel assembly - Control panel on front top of printer |
| RG5-5905-000CN |
PC Board - Process cartridge PC Board - Image drum PC Board |
| RG5-5907-020CN |
PC Board - CRG Driver PC Board assembly - Print Cartridge Drive Controller PC Board |
| RG5-5909-000CN |
PC Board - Memory switch PC board assembly - Mounts on the rear of the toner cartridge drive assembly |
| RG5-5914-000CN |
PC Board - Fuser sensor PC board - Mounts on a support bracket inside the print engine frame assembly |
| RG5-5971-000CN |
PC Board - Regulator PC Board - Interlock power supply - Provides 24VDC to interlocks |
| RG5-6032-000CN |
PC Board - Connector PC Board - High voltage connector PC Board |
| RG5-6032-020CN |
PC Board - Connector PC Board - High voltage connector PC Board |
| RG5-7879-000CN |
PC Board - Process cartridge PC Board - Image drum PC Board |
| RG5-7882-000CN |
PC Board - CRG Driver PC Board assembly - Print Cartridge Drive Controller PC Board |
| RG5-7884-000CN |
PC Board - Memory switch PC board assembly - Mounts on the rear of the toner cartridge drive assembly |
| RG5-7889-000CN |
PC Board - Fuser sensor PC board - Mounts on a support bracket inside the print engine frame assembly |
| RG5-7892-000CN |
PC Board - Regulator PC Board - Interlock power supply - Provides 24VDC to interlocks |
| RG5-7902-000CN |
PC Board - Connector PC Board - High voltage connector PC Board |
| RG5-6090-220CN |
Pickup Assembly - Manual feed pickup assembly - Tray 1 pickup assembly - Complete assembly |
| RG5-6196-000CN |
Pickup Assembly - Paper pickup assembly - Includes both pickup motors - No lower level parts available for this assembly |
| RG5-6196-100CN |
Pickup Assembly - Paper pickup assembly - Includes both pickup motors - No lower level parts available for this assembly |
| RG5-6196-110CN |
Pickup Assembly - Paper pick-up ass y. |
| RB2-7537-000CN |
Plate - Positioning plate - Attaches to metal support for ITB cleaner assembly on front of printer. (Part approaching End of Life, please contact HP for availability) |
| RF5-3505-000CN |
Plate - Mounting plate - Metal guide on front of printer for assemblies that move during ITB (Intermediate Transfer Belt) cleaning cycle |
| RG5-6031-000CN |
Power Supply - High voltage power supply assembly - Mounts on the upper rear of print engine frame |
| RG5-6031-060CN |
Power Supply - High voltage power supply assembly - Mounts on the upper rear of print engine frame |
| RG5-7901-000CN |
Power Supply - High voltage power supply assembly - Mounts on the upper rear of print engine frame |
| RH3-0353-020CN |
Power Supply - High Voltage power supply assembly - Supplies high voltage power for the corona |
| RH3-0376-000CN |
Power Supply - High Voltage power supply assembly - Supplies high voltage power for the corona |
| RH3-2236-000CN |
Power Supply - Power supply assembly - For 100VAC to 127VAC operation |
| RH3-2236-030CN |
Power Supply - 110v power supply pcb assy |
| RH3-2237-040CN |
Power Supply - Power Supply Assembly - For 200VAC to 240VAC operation |
| RH3-2258-000CN |
Power Supply - Power Supply Assembly - For 100VAC to 127VAC operation |
| RH3-2258-030CN |
Power Supply - Power Supply Assembly - For 100VAC to 127VAC operation |
| RH3-2258-040CN |
Power Supply - Power Supply Assembly - For 100VAC to 127VAC operation |
| RH3-2259-000CN |
Power Supply - Power Supply Assembly - For 200VAC to 240VAC operation |
| RH3-2259-030CN |
Power Supply - Power supply assembly - For 220VAC |
| RH3-2259-040CN |
Power Supply - Power Supply Assembly - For 200VAC to 240VAC operation |
| C8547Q-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RB2-7501-000CN |
Retainer - Link retainer - Retainer clip that holds secondary transfer assembly link arm in place |
| RB2-7354-000CN |
Rod - Switch rod - Mechanical connection between power button and Low Voltage Power Supply PCA |
| RG5-6131-000CN |
Rod - Rear lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock rear of ITB - Actuated via the large green handle on front of printer. |
| RG5-6131-030CN |
Rod - Rear lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock rear of ITB - Actuated via the large green handle on front of printer. |
| RG5-6016-000CN |
Roller - Paper registration roller assembly - Complete assembly |
| RG5-6016-060CN |
Roller - Paper registration roller assembly - Complete assembly |
| RG5-6178-030CN |
Roller - Transfer roller assembly |
| RG5-6178-060CN |
Roller - Transfer roller - Primary transfer roller assembly |
| RG5-5699-040CN |
Sensor - End paper sensor assembly - Contains Tray 2 and 3 paper length detection switches |
| RG5-6038-000CN |
Sensor - Waste toner sensor assembly - Mounts to the front of the print engine frame assembly |
| RG5-6038-040CN |
Sensor - Waste toner sensor assembly - Mounts to the front of the print engine frame assembly |
| RG5-6123-020CN |
Sensor - Registration sensor assembly - Located in front of ITB assembly behind right side door |
| RG5-6123-030CN |
Sensor - Registration sensor assembly - Located in front of ITB assembly behind right side door (Part approaching End of Life, please contact HP for availability) |
| RG5-6152-000CN |
Sensor - Delivery sensor assembly - Upper left paper output sensor assembly |
| RG5-6152-050CN |
Sensor - Delivery sensor assembly - Upper left paper output sensor assembly |
| RG5-6153-000CN |
Sensor - Humidity sensor assembly - Located between the two fans on upper right side of printer |
| RG5-6153-030CN |
Sensor - Humidity sensor assembly - Located between the two fans on upper right side of printer |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| C8547Q-Manual_Color |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C8546-69005 |
Service Parts - Rstrd Rg5-5901-000cn |
| C8546-69006 |
Service Parts - Rstrd C8546-69006n |
| RB2-7217-000CN |
Service Parts - Order Rb2-7182-000cn |
| RF5-3546-000CN |
Service Parts - Order Rf5-3546-020cn |
| RG5-5905-020CN |
Service Parts - Order Rg5-7879-000cn |
| RG5-5907-000CN |
Service Parts - Order Rg5-7882-000cn |
| RG5-6017-000CN |
Service Parts - Order Rg5-6017-080cn |
| RG5-6022-000CN |
Service Parts - Order Rg5-6022-080cn |
| RG5-6040-000CN |
Service Parts - Order Rg5-6040-050cn |
| RG5-6090-160CN |
Service Parts - Order Rg5-6090-220cn |
| RG5-6097-000CN |
Service Parts - Order Rg5-6196-110cn |
| RG5-6098-210CN |
Service Parts - Order Rg5-6098-220cn |
| RG5-6114-000CN |
Service Parts - Order Rg5-6114-040cn |
| RG5-6115-000CN |
Service Parts - Order Rg5-7900-000cn |
| RG5-6123-000CN |
Service Parts - Order Rg5-6123-030cn |
| RG5-6178-000CN |
Service Parts - Transfer roller - Primary transfer roller assembly |
| RG5-6179-000CN |
Service Parts - Order Rg5-6179-060cn |
| RG5-6179-020CN |
Service Parts - Order Rg5-6179-060cn |
| RG5-6180-000CN |
Service Parts - Order Rg5-6180-190cn |
| RG5-6180-030CN |
Service Parts - Order Rg5-6180-190cn |
| RG5-6180-040CN |
Service Parts - Order Rg5-6180-190cn |
| RH3-0353-000CN |
Service Parts - Order Rh3-0376-000cn |
| RH3-2237-000CN |
Service Parts - Order Rh3-2259-040cn |
| RG5-6122-020CN |
Shaft - Soft link shaft assembly - Silver shaft and plastic cams that lift ITB cleaning blade into position |
| RG5-6132-000CN |
Shaft - Front lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock front of ITB - Actuated via the large green handle on front of printer |
| RG5-6132-030CN |
Shaft - Front lift lock assembly - Black plastic cam locks with a silver colored metal flat bar between that lift and lock front of ITB - Actuated via the large green handle on front of printer |
| WG8-5362-000CN |
Shaft - Photo-sensor (TLP1241) - Sensor flag activated. |
| RS6-2442-000CN |
Spring - Tension spring - Provides tension for big green handle on front of printer |
| RS6-2442-020CN |
Spring - Tension spring - Provides tension for big green handle on front of printer |
| RB2-7302-000CN |
Support - Side plate hinge support - Image drum door hinge |
| RB2-7515-000CN |
Support - Front cleaner support - White plastic piece that attaches to metal support for ITB cleaner assembly on front of printer |
| RG5-6107-000CN |
Support - MP Tray/Tray 1 rear support assembly - Tray 1 right side support |
| RG5-6107-020CN |
Support - MP Tray/Tray 1 rear support assembly - Tray 1 right side support |
| RG5-6185-000CN |
Support - Access door strut - Attached to right side of diverter door assembly |
| RG5-6036-000CN |
Switch - Right interlock switch assembly - Right side door open switch |
| RG5-6036-030CN |
Switch - Right interlock switch assembly - Right side door open switch |
| RG5-6037-000CN |
Switch - Left interlock switch assembly - Left side door open switch |
| RG5-6037-030CN |
Switch - Left interlock switch assembly - Left side door open switch |
| RG5-6141-000CN |
Tensioner - Latch tensioner assembly - Provides tension for image cartridge latch - Four used |
| RG5-6141-020CN |
Tensioner - Latch tensioner assembly - Provides tension for image cartridge latch - Four used |
| RG5-6141-030CN |
Tensioner - Latch tensioner assembly - Provides tension for image cartridge latch - Four used |
| RF5-3535-000CN |
Tool - Jam removal tool - Large tweezer like tool to help access paper jams in limited access areas |
| RG5-6179-030CN |
Transfer Assembly - Secondary Transfer assembly - Complete assembly - Transfer roller assembly at bottom of ITB assembly - T2 |
| RG5-6179-060CN |
Transfer Assembly - Transfer assembly - Secondary transfer assembly - Transfer assembly at bottom of ITB assembly - T2 transfer assembly |
| RB2-7207-000CN |
Tray - Waste toner catch tray - Slides beneath Intermediate Transfer Belt (ITB) cleaner assembly to collect waste toner |
| RB2-7341-000CN |
Tray - Top tray - Moveable face-down paper output tray |
| RG5-5635-110CN |
Tray - 500-sheet paper cassette - Paper cassette used for tray 2 and tray 3 |
| RG9-1516-000CN |
Tray - 500 Sheet paper cassette - Paper cassette used for Tray 2 and Tray 3 |
View service parts