| PF2282-SVPNR |
ADF - ADF assembly - For LaserJet 4345MFP - Includes ADF rear cover, ADF cable, ADF input tray, ADF front cover, ADF mylar replacement kit, ADF white scan background, ADF mylar holder assembly, ADF white mylar backing with 2 springs, ADF left cover, screw 4x10 |
| RC1-2782-000CN |
Arm - Paper size arm - Senses paper size in paper tray - Three used |
| RC1-2827-000CN |
Arm - Arm - Goes on the upper inside front of printer |
| RC1-2828-000CN |
Arm - Arm - Triangle shaped arm on upper inside front of printer |
| RM1-0025-040CN |
Belt - Paper feed belt assembly |
| RC1-3044-000CN |
Button - Power switch button - Located on lower left side of printer |
| 5851-1827 |
Cable - Hard drive ribbon cable - Includes the data cable and power connections |
| 5851-2720 |
Cable - Data cable for hard disk drive (2-wire) |
| 5851-3051 |
Cable - Power cable for hard disk drive (5-wire) |
| 8120-8907 |
Cable - Telephone cable (Australian) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Australian phone plug on other end |
| 8120-8908 |
Cable - Telephone cable (Korea) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Korea phone plug on other end |
| 8120-8911 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) |
| 8120-8912 |
Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end |
| 8120-8913 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) |
| 8120-8914 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) |
| 8120-8915 |
Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) |
| 8120-8916 |
Cable - Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end |
| 8120-8918 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) |
| 8120-8920 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) |
| 8120-8921 |
Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) |
| 8120-8922 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) |
| 8120-8923 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) |
| 8121-0811 |
Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
| 8121-0844 |
Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) |
| PF2282K165NI |
Cable - LaserJet ADF to scan control board cable |
| RK2-0469-000CN |
Cable - Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J81 to J51 |
| RK2-0470-000CN |
Cable - Ribbon cable - Flat cable between DC Controller Board and engine power supply board - J80 to J50 |
| RM1-1193-000CN |
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| RM1-1357-000CN |
Cable - Flat ribbon cable - Ribbon cable between the Scanner Controller PCA and the Formatter PCA. |
| RM1-1367-000CN |
Cable - Laser scanner cable - From DC Controller board to Laser Scanner assembly |
| RM1-1368-000CN |
Cable - Sensor cable - From DC Controller PCA to Delivery tray full sensor (PS104) |
| RM1-1370-000CN |
Cable - Feeder cable - Data cable for optional 500 sheet feeder assembly - From DC Controller to 500 sheet optional feeder |
| RM1-1371-000CN |
Cable - Delivery unit cable - From DC Controller PCA to Stapler/Stacker unit or Multibin Mailbox unit |
| RM1-1372-000CN |
Cable - Scanner joint cable - From DC Controller to J1422D - Scanner motor and beam detect PCA |
| RM1-1375-000CN |
Cable - Power cable - From DC Controller PCA to power factor correction (PFC) power supply PCA |
| RM1-1376-020CN |
Cable - Fan cable - From DC Controller PCA to DC Controller PCA cooling fan (FN104) |
| RM1-1380-000CN |
Cable - Reversing cable - From DC Controller PCA to Reversing Intermediate PCA |
| RM1-1381-020CN |
Cable - Control panel cable - From DC Controller PCA to the front control panel |
| RM1-1397-000CN |
Cable - Door switch cable - From DC Controller PCA to top cover switch (SW101) |
| RM1-1398-000CN |
Cable - Image scanner cable - From DC Controller board to image scanner assembly |
| RM1-1400-000CN |
Cable - Grounding cable - Duplexing unit grounding cable |
| J7972G |
Card - Parallel port card - 1284B Parallel card - Compatible operating systems Windows NT 4.0, 98, 2000, Me, XP |
| H7668E |
Care Pack - HP 3 year Next business day Onsite LaserJet 4345/ M4345MFP Hardware Support |
| H7686E |
Care Pack - HP 3 year 4 hour response 13x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| H7688PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite LaserJet 4345/4100/M4345MFP Support |
| H7689PE |
Care Pack - HP 1 year Post Warranty 4 hour 13x5 LaserJet 4345/4100/M4345MFP Support |
| HC122E |
Care Pack - HP Maintenance Kit Replacement Color LaserJet 4730MFP/CM4730MFP/LJ4345MFP/M4345 MFP ADF Service |
| U2010E |
Care Pack - HP Network Installation mid-range LaserJet Multifunction printer Service |
| U4845E |
Care Pack - HP 3 year 4 hour response 9x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| U6401PE |
Care Pack - HP 1 year Post Warranty 4 hour response 9x5 OnsiteLaserJet 41xx/4345/M4345MFP Hardware Support |
| U8025E |
Care Pack - HP 4 year Next business day Onsite LaserJet 4345/M4345MFP Hardware Support |
| U8026E |
Care Pack - HP 5 year Next business day Onsite LaserJet 4345/M4345MFP Hardware Support |
| UA326E |
Care Pack - HP Maintenance Kit Replacement LaserJet 4345/ M4345MFP Fuser 110V Service |
| UA328E |
Care Pack - HP 4 year 4 hour response 9x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| UA329E |
Care Pack - HP 5 year 4 hour response 9x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| UA330E |
Care Pack - HP 4 year 4 hour response 13x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| UA331E |
Care Pack - HP 5 year 4 hour response 13x5 Onsite LaserJet 4345/M4345MFP Hardware Support |
| UK667E |
Care Pack - HP 3 year Next Business Day Onsite plus Defective Media Retention for LaserJet M4345 MFP Support |
| UK675PE |
Care Pack - HP 1 year Post Warranty Next Business Day plus Defective Media Retention LaserJet M4345 MFP Support |
| UL624E |
Care Pack - HP Secure Hard Disk Installation and Startup Service |
| UT812PE |
Care Pack - HP 2 year Post-Warranty Next business day onsite LaserJet 4345 4100 M4345 MFP Hardware Support |
| UT969E |
Care Pack - HP 4 year Next business day Onsite + Defective Media Retention LaserJet M4345 MFP Support |
| UU850E |
Care Pack - HP 5 year Next business day Onsite + Defective Media Retention LaserJet M4345 MFP Support |
| UU926PE |
Care Pack - HP 1 year Post Warranty Phone Assist Mid-range Multifunction and High-end LaserJet printer Service |
| C8091A |
Cartridge - Replacement staple cartridge - Contains 5000 staples |
| Q5945-67901 |
Cartridge - Black toner cartridge - Has maximum capacity toner (prints approximately 18,000 pages) |
| Q5945-67901 |
Cartridge - Black toner cartridge - Has maximum capacity toner (prints approximately 18,000 pages) |
| Q5945A |
Cartridge - Black toner cartridge - Has maximum capacity toner (prints approximately 18,000 pages) |
| Q5945AG |
Cartridge - Black toner cartridge - Will print approximately 18,000 pages based on a 5% print density |
| RC1-0245-000CN |
Case - Connector case - Envelope feeder connector case - Plastic piece that secures the envelope feeder connector to the printer |
| XD9-0234-000CN |
Clip - E-Type retainer ring |
| RK2-0349-000CN |
Clutch - Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
| CB425-67903 |
Control Panel - Control panel assembly - Control buttons and display located on top of the printer - Does not include overlay |
| Q3942-60140 |
Control Panel - Control panel assembly - Control buttons and display located on top of the printer - Does not include overlay |
| CB425-60101 |
Cover - Formatter board cage assembly - Metal formatter cage cover |
| IR4041K114NI |
Cover - Side cover - Left side trim cover for flatbed scanner assembly |
| IR4041P213NI |
Cover - Side cover - Right side trim cover for flatbed scanner assembly |
| IR4041P214NI |
Cover - Lock cover - Flatbed scanner carriage lock cover - Top left side of flatbed scanner |
| PF2282K040NI |
Cover - Pickup roller cover - `C` shaped plastic cover that surrounds the paper pickup roller assembly - Mounts on the bottom of the ADF cover assembly |
| PF2282K166NI |
Cover - ADF hinge flap - ESD hinge cover for ADF assembly |
| PF2282P041NI |
Cover - Jam access cover - Top access cover for ADF assembly |
| PF2282P044NI |
Cover - ADF cover - Plastic rear cover for ADF assembly |
| PF2282P058NI |
Cover - Left cover - left external cover for ADF unit |
| PF2282P059NI |
Cover - ADF cover - Plastic front cover for ADF assembly |
| PF2282P060NI |
Cover - Cover - ADF output tray bottom cover |
| RC1-2598-000CN |
Cover - Rear cover - Located on back of the printer next to the formatter cover |
| RC1-2820-000CN |
Cover - Latch handle cover - Front cover for latch handle on upper plate assembly |
| RC1-2833-000CN |
Cover - Arm cover - Located on upper front inside of the printer |
| RC1-2881-000CN |
Cover - Handle cover - Lower right side cover handle |
| RC1-3035-000CN |
Cover - Formatter cover |
| RC1-3041-000CN |
Cover - Inner front cover - Inner front left corner cover |
| RC1-3042-000CN |
Cover - Rear cover - Left rear corner cover |
| RC1-3043-000CN |
Cover - Lower left cover - Plastic cover for left side of scanner module - Printer power switch mounts to this cover |
| RC1-3052-000CN |
Cover - Front left side cover |
| RC1-3196-000CN |
Cover - Front cover - Front side upper cover for 500 sheet feeder |
| RC1-3197-000CN |
Cover - Rear cover - Back side cover for 500 sheet feeder |
| RC1-3198-000CN |
Cover - Right cover - Right side upper cover for 500 sheet feeder |
| RC1-3199-000CN |
Cover - Left cover - Left side cover for 500 sheet feeder |
| RC1-3200-000CN |
Cover - Upper cover - Left side upper cover for 500 sheet feeder - Small top edge cover on left side |
| RL1-0455-000CN |
Cover - Envelope feeder cover |
| RL1-0457-000CN |
Cover - Front corner cover - Front cover for scanner portion of printer |
| RM1-0942-000CN |
Cover - Front cover - Covers the front and center of the printer |
| RM1-1015-000CN |
Cover - Front cover asembly - Front plastic piece that control panel mounts to |
| RM1-1016-000CN |
Cover - Right cover assembly - Tray 1 attaches to this cover |
| RM1-1017-000CN |
Cover - Rear printer cover assembly - Plastic cover for rear of printer |
| RM1-1018-000CN |
Cover - Duplexer slot cover assembly - Removable lower rear cover for Duplexer attachment slot |
| RM1-1033-000CN |
Cover - Lower right cover assembly - Smaller plastic piece below upper right cover - Allows access to Tray 2 separation roller |
| RM1-1574-000CN |
Damper - Front gas damper assembly |
| RM1-1575-000CN |
Damper - Rear gas damper assembly |
| RM1-1456-000CN |
Display - Tray number plate assembly - Changeable tray number display assembly - Located in front right corner of 500 sheet feeder assembly |
| RC1-2597-000CN |
Door - Stapler/stacker access door - Front jam access door for stapler/stacker unit |
| RM1-0981-000CN |
Door - Three bin mailbox access door - Front jam access door for three bin mailbox unit |
| 0950-4753 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
| 5851-3833 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935. |
| J7989G |
Drive Assembly - Hard drive - High performance EIO serial ATA hard drive.EIO hard disk - Can be installed in printers with EIO slots - Provides mass storate capability for downloading fonts and macros - May also hold print jobs. |
| RM1-1029-040CN |
Drive Assembly - Lifter drive assembly support - Tray 2 paper pickup lifter drive support assembly |
| RM1-1049-000CN |
Drive Assembly - Main drive gear assembly - Located at the rear part of the printer |
| Q5969-67901 |
Duplexer - Duplexer assembly for LaserJet 4345 - For two sided printing |
| Q5969A |
Duplexer - HP LaserJet 4345mfp optional duplexer assembly - For two sided printing |
| RK2-0278-000CN |
Fan - Cooling fan - Located on left side of printer (FN101) |
| RK2-0280-000CN |
Fan - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
| RK2-0472-000CN |
Fan - DC Controller fan (FN104) - Provides air to the DC controller area |
| Q3701-60014 |
Fax Module - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| 5851-4076 |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| Q2438B |
Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer - Includes the envelope tray and multi-lingual installation instructions |
| RC1-0060-050CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0061-000CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RM1-0012-020CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0378-000CN |
Flag - Shutter flag for HP LaserJet M4345 MFP |
| RC1-0462-000CN |
Flag - Flag - Output bin full flag |
| RL1-0462-000CN |
Flag - Flag - Output bin full flag |
| RL1-0462-020CN |
Flag - Full detect flag |
| RM1-1010-000CN |
Flag - Paper sensing guide - Paper guide/flag assembly with sensor (PS101) |
| IR4041P215NI |
Flange - ADF front cover flange - Narrow cover that snaps into place to cover the leading edge of scanning assembly - Fills gap between the front cover and the scanner assembly. |
| Q2626A |
Flash Card - 128MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| CB425-67901 |
Formatter - Formatter PC board assembly - For HP LaserJet M4345MFP |
| PF2282K034NI |
Frame - ADF separation pad frame assembly - Includes the full width support structure and the ADF separartion pad assembly - Mounts in the top of the ADF assembly at the back of the input tray |
| CB425-69003 |
Fuser Assembly - LJ 4345 220V Fuser, Fusing assembly - For 220 VAC operation - Bonds toner to paper with heat |
| RM1-1043-080CN |
Fuser Assembly - Fusing Assembly - For 100-127 VAC - Bonds toner to paper with heat |
| RM1-1044-080CN |
Fuser Assembly - Fuser Assembly - 220/240 VAC - Bonds toner to paper with heat |
| PF2282P039NI |
Gear - Gear - Pick up gear |
| RC1-0331-000CN |
Gear - Gear - 20 tooth gear used to synchronize paper width adjustment stops - Located in right side bottom of cassette |
| RU5-0045-020CN |
Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly |
| RU5-0045-030CN |
Gear - 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part. |
| RU5-0050-000CN |
Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
| RU5-0253-000CN |
Gear - Gear - 15 tooth gear located in right rear corner of 500 sheet paper cassette |
| RU5-0254-000CN |
Gear - Gear - 14 tooth gear located in right rear corner of 500 sheet paper cassette |
| RU5-0256-000CN |
Gear - 23 tooth gear - Located on right side under paper pickup drive assembly |
| PF2282P353NI |
Guide - Paper guide - ADF clear plastic paper guide |
| RC1-2853-000CN |
Guide - Upper cartridge guide - Located in upper plate assembly |
| RC1-2854-000CN |
Guide - Legal size paper guide - Located in upper plate assembly |
| RC1-2884-000CN |
Guide - Duplexer guide - Guide/support for duplexer assembly |
| RC1-3020-000CN |
Guide - Front guide - Front cover for 500 sheet paper cassette |
| RM1-0947-000CN |
Guide - Jog guide assembly |
| RM1-1019-000CN |
Guide - Reversing separation guide assembly |
| RM1-1027-000CN |
Guide - Guide assembly - Guide that protects the large flat cable between the Scanner Controller PCA to the Formatter PCA |
| RM1-1046-020CN |
Guide - Entrance guide - Fuser paper entrance guide |
| 0950-4717 |
Hard Drive - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
| 5851-3230 |
Hard Drive - Hard drive - For digital sending, copy, and storage |
| 5851-3231 |
Hard Drive - Hard drive kit - 40GB hard drive with both plastic side rails |
| J7989A |
Hard Drive - Hard drive - High performance EIO serial ATA hard drive |
| PF2282K008NI |
Hinge - Hinge assembly - ADF right side hinge assembly |
| PF2282K041NI |
Hinge - Hinge assembly - ADF left side hinge assembly |
| RC1-2901-000CN |
Hinge - Door hinge - Right side door hinge - Two used |
| PF2282K043NI |
Holder - Mylar holder assembly - This is the cover (holder) that holds the Clear mylar sheet in place - Mounts on the bottom of the ADF assembly |
| RC1-2823-000CN |
Holder - Cover - Front cover lock stopper holder |
| RC1-2855-000CN |
Holder - Right side laser shutter holder |
| RC1-2864-000CN |
Holder - Flag holder - Output bin full flag holder |
| RC1-3002-000CN |
Holder - Link holder - Holder/mount for mechanical link beteen metal rod and outside power switch |
| RC1-3063-000CN |
Holder - Door switch holder - Secures top cover switch (SW101) to frame |
| Q5997A |
Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
| Q5998A |
Kit - LaserJet 4345mfp 110VAC maintenance kit LaserJet 4345MFP printer - Includes Fuser Assembly separation rollers, transfer roller, paper feed rollers, pickup roller. |
| Q5999A |
Kit - Maintenance kit - For 220 VAC - Includes fusing assembly, three separation rollers, transfer roller, three paper feed rollers, pick-up roller, and instruction manual |
| RM1-1573-040CN |
Laser Scanner - Laser/scanner assembly |
| PF2282K164NI |
Latch - Access latch - ADF jam accesss latch |
| RC1-2818-000CN |
Latch - Upper plate latch - Locking latch for upper plate assembly |
| RC1-2821-000CN |
Latch - Rear cover lock - Located at rear of upper plate assembly |
| RC1-3106-000CN |
Lever - Laser scanner shutter lever |
| 5851-2766 |
Lifter - Swing plate assembly kit - For Tray 2 paper lift assembly - Located between the main gear assembly and the fuser, just above the power supply - Contains swing plate assembly and new fuser pressure release gear |
| RM1-0043-060CN |
Lifter - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-1457-050CN |
Lifter - Lifter drive assembly - For 500 sheet paper feeder assembly |
| RC1-2822-000CN |
Link - Handle link - Mechanical link between upper plate handle and release latch |
| RC1-3003-000CN |
Link - Power switch link - Mechanical link beteen metal rod and outside power switch |
| IR4041K102NI |
Lock - Scanner carriage lock assembly - Includes the brackect, the two slider/lock pieces and spring - Locks the optical assembly carriage in place to prevent damage when shipping |
| Q5692-67901 |
Mailbox - Color LaserJet 4345 and 4370MFP three bin multi-bin mailbox |
| Q5692A |
Mailbox - Mailbox accessory - Three bin mailbox for LaserJet 4345 series |
| Q5997-67901 |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pickup roller assembly, separation pad assembly, and three clear mylar replacement strips. |
| Q5997-67904 |
Maintenance Kit - Maintenance kit - For 120 VAC - Includes Fuser Assembly, separation rollers, transfer roller, paper feed rollers, pick-up roller, gloves and instruction manual. |
| Q5997A |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
| Q5997A |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
| Q5997A |
Maintenance Kit - ADF maintenance kit - Includes the ADF paper pick-up roller assembly, separation pad assembly, and three clear mylar replacement strips |
| Q5998-67904 |
Maintenance Kit - LaserJet 4345MFP printer maintenance kit (120V) - Includes Fuser Assembly separation rollers, transfer roller, paper feed rollers, pickup roller, gloves and instruction manual |
| Q5998A |
Maintenance Kit - LaserJet 4345mfp 110VAC maintenance kit LaserJet 4345MFP printer - Includes Fuser Assembly separation rollers, transfer roller, paper feed rollers, pickup roller. |
| Q5998A |
Maintenance Kit - LaserJet 4345mfp 110VAC maintenance kit LaserJet 4345MFP printer - Includes Fuser Assembly separation rollers, transfer roller, paper feed rollers, pickup roller. |
| Q5999-67904 |
Maintenance Kit - LaserJet 4345MFP printer maintenance kit - For 220 VAC - Includes fusing assembly separation rollers, transfer roller, paper feed rollers, pickup roller, gloves, and instruction manual |
| Q5999A |
Maintenance Kit - Maintenance kit - For 220 VAC - Includes fusing assembly, three separation rollers, transfer roller, three paper feed rollers, pick-up roller, and instruction manual |
| Q5999A |
Maintenance Kit - Maintenance kit - For 220 VAC - Includes fusing assembly, three separation rollers, transfer roller, three paper feed rollers, pick-up roller, and instruction manual |
| Q2625A |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q2627A |
Memory - 256MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7713-67951 |
Memory - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7715-67951 |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718-67951 |
Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718A |
Memory - 128MB, 100-pin, DDR DIMM |
| Q7719-67951 |
Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7719A |
Memory - 256MB, 100-pin, DDR DIMM |
| Q7725-67978 |
Memory - Firmware Compact Flash card - For LaserJet 4345mfp - Version 09.071.8 |
| Q7725-67981 |
Memory - Firmware Compact Flash card - For LaserJet 4345mfp - Version 09.071.8 |
| Q7725-67988 |
Memory - Firmware Compact Flash card - For LaserJet 4345mfp - Version 09.071.8 |
| RK2-0273-000CN |
Motor - Main motor - M101 FOR HEWLETT PACKARD LaserJet MODELS. |
| RK2-0275-000CN |
Motor - Toner cartridge motor (M102) - Mounts on the front right side of the printer |
| RK2-0473-000CN |
Motor - Stepper motor (M104) - Crossing motor located in the paper reversing assembly |
| RK2-0474-000CN |
Motor - Stepper motor (M105) - Motor that drives the reversing roller located in the paper reversing assembly |
| RK2-0475-000CN |
Motor - Stepper motor (M106) - Paper delivery motor located in the paper reversing assembly |
| PF2288K050NI |
Mylar - Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly |
| Q6496A |
Mylar - Three ADF mylar replacement kit - Includes three clear mylar replacement strips for the ADF guide - Mounts in the ADF mylar holder assembly HP LJ 4345MFP ADF mylar sheets |
| CB425-60103 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English) |
| CB425-60104 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (French) |
| CB425-60105 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian) |
| CB425-60106 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
| CB425-60107 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
| CB425-60108 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
| CB425-60109 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
| CB425-60110 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
| CB425-60111 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
| CB425-60112 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finnish) |
| CB425-60113 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish) |
| CB425-60114 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish) |
| CB425-60115 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian) |
| CB425-60116 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech) |
| CB425-60117 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
| CB425-60122 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
| CB425-60123 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
| CB425-60124 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek) |
| CB425-60125 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
| CB425-60129 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
| CB425-60130 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
| CB425-60131 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovak) |
| CB425-60132 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
| CB425-60149 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)Control Panel Overlay Ki Replacement. |
| PF2282K035NI |
Pad - ADF paper seperation pad assembly - Mounts in the center of the ADF separation pad frame assembly at the rear part of the paper input tray |
| RL1-0007-000CN |
Pad - Tray 1 paper separation pad |
| CB425-67901 |
PC Board - Formatter PC board assembly - For HP LaserJet M4345MFP |
| CB425-67906 |
PC Board - Formatter PC board assembly - For LaserJet M4345MFP |
| CB425-67907 |
PC Board - Formatter PC board assembly - For LaserJet M4345MFP |
| CB425-67910 |
PC Board - Formatter PC board assembly - For LaserJet M4345MFP |
| CB425-67911 |
PC Board - Formatter PC board assembly - For LaserJet M4345MFP |
| IR4041K512NR |
PC Board - Scanner Control Board (SCB) - Provides timing and control for the flatbed scanner |
| Q3701-60012 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60020 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60021 |
PC Board - Modem PCA - HP LaserJet analog fax accessory 300 |
| Q3701A |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| RM1-1041-040CN |
PC Board - Engine power supply board - For 110 VAC |
| RM1-1042-040CN |
PC Board - Engine power supply board - For 220 VAC |
| RM1-1122-000CN |
PC Board - Driver PCA - 500 sheet feeder driver PCA |
| RM1-1354-000CN |
PC Board - DC Controller board - DC Controller PCA for LaserJet 4345mfp series |
| RM1-1379-000CN |
PC Board - Reversing unit intermediate PC board |
| J6035D |
PC Board Interface - HP JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6035G |
PC Board Interface - JetDirect 175X external print server - Has one 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| J7942A |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7942G |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7951G |
PC Board Interface - HP Jetdirect ew2400 802.11g wireless print server module - Includes power supply, USB cable, LAN/Ethernet cable, setup documentation and software |
| J7960G |
PC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| J7961G |
PC Board Interface - HP Jetdirect 635n IPv6/IPsec Print Server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM;Click to order the functional equivalent: J7961-69011 |
| RM1-0034-070CN |
Pickup Assembly - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced |
| RM1-1060-030CN |
Pickup Assembly - Paper pick up drive assembly |
| PF2282P025NI |
Plate - White backing plate assembly - Used as a white background for scanning documents when passing through the ADF assembly - Mounts on the underside of the ADF assembly towards the rear |
| PF2282P339NI |
Plate - ADF white plastic scanner background plate - Used as a white background during flatbed document scanning - Mounts on the underside of the ADF assembly (above the scanner assembly) |
| RM1-0043-010CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-020CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| RM1-0043-050CN |
Plate - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| 8121-0564 |
Power Cord - Power cord (Black) - 2.0m (6.6ft) long - Has straight (F) C13 receptacle (For 240V in India) |
| 8121-0731 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only. |
| 8121-0733 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| 8121-0734 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220V in Brazil and Thailand) |
| 8121-0736 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 100V in Japan) |
| 8121-0737 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
| 8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| 8121-0739 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.) |
| 8121-0740 |
Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
| 8121-0964 |
Power Cord - Power cord (Black) - 16 AWG (1.25 sq.mm.), 1.9m (6.2ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, and Thailand) |
| 8121-1004 |
Power Cord - Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel) |
| RM1-1013-050CN |
Power Supply - DC power supply - 110VACc RM1-1013 DC Power Supply - 110v - LJ 4345 / M4345 MFP series. |
| RM1-1014-050CN |
Power Supply - DC power supply - Printed circuit board (PCB) 220VAC |
| RM1-1014-060CN |
Power Supply - Low voltage power supply (LVPS)- For 220 VAC |
| J7934-69011 |
Print Server - JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector;Click to order the functional equivalent: J7934-69021 |
| J7960A |
Print Server - Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| RM1-1011-000CN |
Rail - Cassette support rail - Left side Tray 2 support rail assembly |
| RM1-1012-000CN |
Rail - Cassette support rail - Right side Tray 2 support rail assembly |
| CB426A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RM1-1022-000CN |
Reversing Unit - Reversing assembly - Reverses paper orientation of output tray |
| RC1-2830-000CN |
Rod - Link rod - Connects to the toner cartridge drive gear mechanism |
| RC1-2902-000CN |
Rod - Rod link for HP LaserJet Enterprise M4555h |
| RC1-2980-000CN |
Rod - Switch rod - Metal rod that connects switch link to electrical switch on the engine power supply board |
| KIT42-69005 |
Roller - HP Laser roller kit assembly includes: one - 1 Transfer Roller, 6 - feed Rollers, one - 1 pickup D-roller tray 1, one - 1 separation pad, and transfer roller tool. See replacement instructions on website, printer tech help. |
| PF2282K039NI |
Roller - ADF paper pickup roller assembly - Includes the pickup roller, separation roller, and drive gear mounted in a frame - Mounts on the bottom of the ADF cover assembly (above the input paper tray) |
| Q7829-67925 |
Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| Q7829-67940 |
Roller - Paper feed roller assembly - Includes four feed serparation rollers |
| RL1-0019-000CN |
Roller - Tray 1 pickup roller - D-shaped roller located under the envelope cover |
| RM1-0036-020CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-1098-030CN |
Roller - Registration roller assembly |
| RM1-1110-000CN |
Roller - Transfer roller assembly - Long black spongy roller that transfers charge to paper |
| IR4041-SVPNR |
Scanner - Scanner assembly - Complete flatbed scanner assembly |
| 030040FNITNI |
Screw - Screw - used to secure flatbed scanner slide rail |
| 030080FWWSNI |
Screw - M3 pan-head phillips screw with machine threads and captive washer - 8mm long |
| 040100FNBBNI |
Screw - M4 pan-head phillips screw with machine threads - 10mm long |
| 0515-4679 |
Screw - M3 pan-head phillips screw with washer - 6mm long |
| IR4041P021NI |
Screw - M3 pan-head phillips screw with plastite threads - 8mm long |
| RC1-0266-020CN |
Screw - M3 stepped shaft screw |
| WS9-0255-000CN |
Screw - Hex head bolt - Thumbscrew on left rear corner - Two used |
| XA9-1420-000CN |
Screw - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long |
| XA9-1447-000CN |
Screw - M12 pan-head Phillips screw with annular nails - 8mm long |
| XA9-1449-000CN |
Screw - M3 pan-head Phillips screw with machine threads - 8mm long |
| XA9-1464-000CN |
Screw - Screw - Flat head phillips drive machine screw - M3 X 6mm |
| XA9-1495-000CN |
Screw - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
| XA9-1500-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XB2-7300-607CN |
Screw - M3X6mm screw with captured washer |
| XB4-7300-809CN |
Screw - M3 self-tapping pan head phillips screw (Black oxide finish) - 8mm long |
| XB4-7401-005CN |
Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates |
| IR4041K105NI |
Sensor - Scanner open sensor assembly - Includes the housing, spring-loaded plunger, and two sensors - Detects when the ADF assembly is open and the optical assembly home position sensor |
| RM1-0041-020CN |
Sensor - Tray 2 paper size tray sensing assembly - White plastic tray size sensing fingers and microswitch assembly |
| RM1-1045-000CN |
Sensor - Door sensor assembly - 500-sheet feeder assembly access door open sensor (SW501) switch assembly |
| RM1-1455-000CN |
Sensor - Paper sensing assembly - Paper present sensing assembly - SR1 |
| RM1-1570-000CN |
Sensor - Paper sensor - Reversing unit paper delivery sensor (PS109) |
| RM1-1571-000CN |
Sensor - Paper sensor - Reversing unit paper jam sensor (PS111) |
| RM1-8438-000CN |
Sensor - Environmental sensor assembly |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| CB426A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RK2-0269-000CN |
Solenoid - Paper pick-up solenoid |
| RK2-0276-000CN |
Solenoid - Tray 1 solenoid - Engages tray 1 pick-up roller |
| RK2-0485-000CN |
Solenoid - Solenoid - Reversing unit face up solenoid - SL105 |
| RK2-0486-000CN |
Solenoid - Solenoid - Reversing unit separation roller solenoid - SL106 |
| RC1-0392-000CN |
Spacer - Screw spacer - Washer used with screws to secure bottom plate to printer - Two used |
| IR4041P041NI |
Spring - Slide spring - Provides tension for flatbed scanner left side cover |
| PF2282P343NI |
Spring - Compression spring - Holds the white mylar backing plate firmly against the document passing through the ADF assembly (Two used) |
| PF2282P352NI |
Spring - Cover spring - Provides tension for left side plastic cover of ADF assembly - Two used |
| RC1-0167-000CN |
Spring - Tension spring - Provides tension for paper size sensor (PS102) |
| RC1-0379-000CN |
Spring - Torsion spring - Provides tension for shutter flag |
| RU5-2251-000CN |
Spring - Grounding spring - Located near front of left side casstte support rail |
| RU5-2265-000CN |
Spring - Small compression grounding spring - Located on the upper rear side of printer chassis |
| Q5691-67901 |
Stacker Assembly - 500 sheet/stapler stacker for Hewlett Packard Multifunction products. |
| Q5691A |
Stacker Assembly - 500 sheet stapler/stacker assembly;Click to order the functional equivalent: Q5691-67901 |
| Q5970A |
Stand - LaserJet 4345mfp stand with storage cabinet |
| RK2-0507-000CN |
Stapler - Stapler mechanism |
| PF2282P061NI |
Stop - Paper stop - ADF output tray paper stop |
| RC1-3090-000CN |
Stop - Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |
| RC1-3124-000CN |
Stop - Hinge shaft stopper - Holds the right side door hinge pin in place |
| RL1-0434-000CN |
Stop - Stopper - Front cover lock stopper |
| RC1-2856-000CN |
Support - Cartridge support - Lower toner cartridge support - Located in upper plate assembly |
| RC1-2911-000CN |
Support - Crossmember support - Plate on left side of upper plate assembly |
| RC1-3102-000CN |
Support - Upper guide support block - Small L-shaped plastic block which supports the upper portion of the Reversing Mechanism |
| RL1-0436-000CN |
Support - Damper support - Metal support bracket that attaches to printer chassis that supports bottom of gas damper |
| RM1-0043-000CN |
Swing - Swing plate assembly - Pressure Roller GearSwing plate assembly - For tray 2 paper lift assembly Located between the main gear assembly and the fuser, just above the power supply. swing plate assembly usually comes with black and white large gears. |
| WC4-5139-000CN |
Switch - Top cover interlock access switch |
| RK2-0359-000CN |
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
| RC1-2758-000CN |
Torque Limiter - Torque limiter - Limits rotation of feed rollers |
| RM1-0005-020CN |
Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly |
| RM1-1001-040CN |
Tray - Paper cassette - 500 sheet paper holding cassette - Can be used in optional 500 sheet Tray 2,3,4 or 5 |
| PF2282K042NI |
Tray Assembly - ADF input tray assembly |
| Q5690A |
Tray Assembly - Paper input tray - High Capacity - Additional wheeled-input tray that holds up to 2500 sheets (16 lb paper) - It supports letter, legal, tabloid, 12 x 18 in, 13 x 19 in |
| Q5968-67901 |
Tray Assembly - LaserJet 4345 Optional 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of - 500-sheet paper feeder and tray/cassette |
| Q5968A |
Tray Assembly - HP LaserJet 4345 mfp 500-Sheet feeder assembly |
| RM1-0940-000CN |
Tray Assembly - Paper output tray - With pull out tray extension |
| RM1-1047-000CN |
Tray Assembly - LaserJet 4345mfp delivery tray assembly |
| RM1-1567-000CN |
Tray Assembly - Multi-Purpose paper input tray (Tray 1) - Fold down tray - Located on the right side of the printer |
| RM1-1572-040CN |
Tray Assembly - Multipurpose tray assembly - Tray 1 paper input assembly - Does not include outside cover |
Techical Help
View service parts