Partshere  
Lexmark and HP New Oem and refurb parts
Partshere, Toners, HP printers and parts
 
top bar
 
www.Partshere.com / HP Printers /  HP OfficeJet J4624 AIO HP Support Page/ HP Service Parts SmartSearch
 
Rate this page:

CB858A - OfficeJet J4624 AIO

 

HP OfficeJet J4624 AIO (CB858A)


MFG Part Number: CB858A
 
Printer Support
Printer Support Techical Help HP Service Manual paper book for HPOfficeJet J4624 AIO Buy the full service manual
HP Printer Picture Diagrams Picture Diagrams
OEM HP Parts List for HP OfficeJet J4624 AIO View full list of service parts
See HP parts for this model:

HP printer parts available for CB858A HP OfficeJet J4624 AIO Printer

CB858-ABSORBER ABSORBER - Ink service station (ISS) bottom absorber foam - absorbs ink during the cleaning process. Service station absorber (sponge) - soaks up used ink during cartridge cleaning. Works as sled filters. - CB858-ABSORBER
CB858-AC_ADAPTER AC_ADAPTER - Power supply module or adapter - one end for connecting to the printer and other end to the power cord, or your ac adapter may have the pwr cord attached. - CB858-AC_ADAPTER
CB858-ACTUATOR ACTUATOR - Actuating unit. this part usually causes the carriage assembly to stalls on the left side of the printer, verify that the clutch actuator arm (slider arm). - CB858-ACTUATOR
CB779-40001 ADF - Window for Automatic Document Feeder (ADF) - A clear plastic window that snaps into place in the bottom of the ADF assembly - CB779-40001
CB779-60004 ADF - ADF assembly - For the OfficeJet J4580 All-in-One printer series - CB779-60004
CB780-60020 ADF - Automatic document feeder (ADF) input tray - CB780-60020
CB858-ADF_ARM ADF_ARM - Senses paper in the ADF area tray / feeder tray. this is a front flapper arm - part of the paper separation mechanism for the paper pickup assembly - mounts just in front of the front separation belts in the ADF assembly. - CB858-ADF_ARM
CB858-ADF_FEED_ASSY ADF_FEED_ASSEMBLY - ADF assembly - does not include ADF input tray. ADF assembly includes the complete ADF assembly (motor, gears, rollers, sensor, does not include the ADF pad or plastic flatbed cover. (for entire unit please see ADF unit assembly). - CB858-ADF_FEED_ASSY
CB858-ADF_INPUT_TRAY ADF_INPUT_TRAY - ADF tray ( for automatic document feeder) this is where papers are placed for feeding into unit. - CB858-ADF_INPUT_TRAY
CB858-ADF_MOTOR ADF_MOTOR - ADF motor - the scanner ADF motor is located on left rear corner of ADF drive, location varies from each unit. however, this is the main motor on the ADF unit. - CB858-ADF_MOTOR
CB858-ADF_OUTPUT_TRAY ADF_OUT_PUT_TRAY - ADF out put tray is where paper come out of ADF (automatic document feeder). - CB858-ADF_OUTPUT_TRAY
CB858-ADF_PAD ADF_PAD - ADF paper seperation pad assembly - mounts in the center of the ADF separation pad frame assembly. this pad prevents from multiple feeding or preventing paper jams while faxing, scanning, or copying. - CB858-ADF_PAD
CB858-ADF_PC_BRD ADF_PC_BOARD - Control board on the ADF unit - CB858-ADF_PC_BRD
CB858-ADF_ROLLER_KIT ADF_ROLLER_KIT - ADF upper pick roller replacement kit. these are the rollers that feed paper into the feeder to be scan, copy, or faxed. - CB858-ADF_ROLLER_KIT
CB858-ADF_SCANNER ADF_SCANNER - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - this is the assembly that scans, copies documents. - CB858-ADF_SCANNER
CB858-ADF_SENSOR_BRD ADF_SENSOR_BOARD - ADF sensor pc board assembly - narrow strip pc board with the two document skew sensors, registration sensor, and timing sensor - mounts on top of the registration guide assembly in the ADF main assembly - CB858-ADF_SENSOR_BRD
CB858-ADF_UNIT_ASSY ADF_UNIT_ASSEMBLY - Complete replacement assemlby unit. copier top assembly, include ADF feeder, pad, roller, motors etc. but may not included input tray and out put tray. - CB858-ADF_UNIT_ASSY
CB858A ALLINONE - HP OfficeJet J4624 All-In-One Printer - CB858A
CB858-ARM_DELIVERY ARM_DELIVERY - Paper sensing arm - for 'paper out' or delivering paper sensing arm - CB858-ARM_DELIVERY
CB858-ARM_DOOR ARM_DOOR - Carriage access door sensor arm - CB858-ARM_DOOR
CB858-ARM_PICKUP ARM_PICK_UP - Paper detection arm - for registration plate on picking up paper - CB858-ARM_PICKUP
CB858-ARM_PLATE ARM_PLATE - Lever arm - used to lift the pressure plate lifter - CB858-ARM_PLATE
CB858-ARM_SENSING ARM_SENSING - Arm assembly senses paper in bottom tray - CB858-ARM_SENSING
CB858-ARM_TENSION ARM_TENSION - Tension arm - maintains tension on carriage belt - CB858-ARM_TENSION
CB858-BATTERY BATTERY - Battery pack for hp printer - CB858-BATTERY
CB858-BELT_ADF BELT_ADF - Transport belt motor - provides the drive to transport paper through the ADF unit. this belt goes in the ADF assembly drive unit - CB858-BELT_ADF
CB858-BELT_CARRIAGE BELT_CARRIAGE - Carriage belt - moves the carriage assembly across the carriage rod - CB858-BELT_CARRIAGE
CB858-BELT_DUPLEX BELT_DUPLEX - Duplex timing belt - small belt that goes on the duplexer unit - CB858-BELT_DUPLEX
CB858-BELT_PAPER BELT_PAPER - Paper drive belt (usually a small belt) - this belt attaches to a gear which is driven by the paper drive motor assembly. - CB858-BELT_PAPER
CB858-BELT_SCANNER BELT_SCANNER - Scanner assembly belt. belt moves the scanner while copying or scanning documents. - CB858-BELT_SCANNER
CB858-BEZEL BEZEL - Front panel overlay (bezel) - (english) control panel bezel - frame around display and control panel - CB858-BEZEL
CB858-BRACKET_LEFT BRACKET_LEFT - Left bracket - carriage rod adjustment bracket (left) - CB858-BRACKET_LEFT
CB858-BRACKET_RIGHT BRACKET_RIGHT - Right bracket - carriage rod adjustment bracket (right) - CB858-BRACKET_RIGHT
CB858-BRACKET_TENSION BRACKET_TENSION - Belt tension bracket - holds the carriage belt idler pulley - CB858-BRACKET_TENSION
8120-8909 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Austria) - 8120-8909
8120-8910 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Belgium) - 8120-8910
8120-8911 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) - 8120-8911
8120-8912 CABLE - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end - 8120-8912
8120-8913 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) - 8120-8913
8120-8914 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) - 8120-8914
8120-8915 CABLE - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) - 8120-8915
8120-8916 CABLE - Telephone cable (Finland and Norway) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Norway phone plug on other end - 8120-8916
8120-8918 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) - 8120-8918
8120-8920 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) - 8120-8920
8120-8921 CABLE - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) - 8120-8921
8120-8922 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) - 8120-8922
8120-8923 CABLE - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) - 8120-8923
8121-0811 CABLE - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) - 8121-0811
8121-0844 CABLE - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) - 8121-0844
8121-0868 CABLE - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long - 8121-0868
CB858-CABLE_CARRIAGE CABLE_CARRIAGE - Cable assembly which connects the main logic board to the carriage motor - CB858-CABLE_CARRIAGE
CB858-CABLE_INTERFACE CABLE_INTERFACE - Parallel cable - connects from your printer to computer via your parallel port. - CB858-CABLE_INTERFACE
CB858-CABLE_MCHNSM CABLE_MECHANISM - Cable assembly which connects the main logic board to the print mechanism - CB858-CABLE_MCHNSM
CB858-CABLE_PANEL CABLE_PANEL - Control panel assembly - includes ribbon cable, this is the calbe that connects to the control panel or display. - CB858-CABLE_PANEL
CB858-CABLE_USB CABLE_USB - This interface calbe is the standard 2.0 usb cable that connects to your printer and computer for printing. - CB858-CABLE_USB
CB858-CAM CAM - Drawer cam - short, spring loaded lever attached to the paper tray frame - used to draw input tray into position - CB858-CAM
CB858-CAP_LIFTER CAP_LIFTER - These lifter caps hold the pressure plate lifter and the kicker spring in place. - CB858-CAP_LIFTER
CB858-CARRIAGE_ASSY CARRIAGE_ASSEMBLY - Ink cartridge carriage assembly - includes carriage, felt, felt retainers, ink cartridge latches, trailing cable, pc board, belt attachment hardware, and slider. - CB858-CARRIAGE_ASSY
CB858-CARRIAGE_BASE CARRIAGE_BASE - Carriage base or pre-loader assembly - mounted to bottom of carriage base - CB858-CARRIAGE_BASE
CB858-CARRIAGE_BELT CARRIAGE_BELT - Carriage drive belt, this belt is attached to the carriage and carriage motor, it moves the carriage side to side while priting. - CB858-CARRIAGE_BELT
CB858-CARRIAGE_CABLE CARRIAGE_CABLE - Flex circuit cable which connects the head driver board to the carriage assembly. in some units it is also known as the trailing cable, this cable moves along with the carriage unit (side to side). - CB858-CARRIAGE_CABLE
CB858-CARRIAGE_LATCH CARRIAGE_LATCH - A-arm latch - retains latch over the printheads on the carriage - CB858-CARRIAGE_LATCH
CB858-CARRIAGE_LATCH_CVR CARRIAGE_LATCH_COVER - The carriage latch is used to keep the cartridge(s) in place. this latch(s) hold the cartridge(s) in place while carriage is printing or idle. - CB858-CARRIAGE_LATCH_CVR
CB858-CARRIAGE_MOTOR CARRIAGE_MOTOR - Carriage motor moves the carriage unit side to side. the carriage belt goes arround this motor, which controls carriage movement. - CB858-CARRIAGE_MOTOR
CB858-CARRIAGE_ONLY CARRIAGE_ONLY - Carriage only - includes carriage, felt, felt retainers, ink cartridge latches - does not include trailing cable, pc board, belt attachment hardware, or slider (for complete carriage unit, please see carriage assembly). - CB858-CARRIAGE_ONLY
CB858-CARRIAGE_PC_BRD CARRIAGE_PC_BOARD - This pc board attaches on the carriage, it is usually a small pc board that has carrage cable attached to it. - CB858-CARRIAGE_PC_BRD
5069-7146 CARTRIDGE - Ink cartridge return kit (TIJ 2.x) - Includes box and instructions - 5069-7146
5969-7553 CARTRIDGE - Ink cartridge return kit (TIJ 2.x, non-US) - Includes box and instructions (Europe) - 5969-7553
CC653-30001 CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653-30001
CC653AE CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653AE
CC653AN CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC653AN
CC654AE CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC654AE
CC654AN CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC654AN
CC656-30001 CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656-30001
CC656AE CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656AE
CC656AN CARTRIDGE - Cartridge for HP Officejet J4000 All-in-One, HP OfficeJet J4000 All-In-One Printer series - CC656AN
CB858-CHASSIS CHASSIS - Chassis assembly - the large plastic item that forms the base of the print mechanism - CB858-CHASSIS
CB858-CLUTCH_ADF CLUTCH_ADF - ADF paper clutch unit. clutch that controls movement on the ADF feeder - CB858-CLUTCH_ADF
CB858-CLUTCH_FEED CLUTCH_FEED - Clutch unit resposible for unit picking up paper from the pick up unit. - CB858-CLUTCH_FEED
CB858-CONTROL_PANEL CONTROL_PANEL - Control panel assembly - control buttons and display on top front of the unit. - CB858-CONTROL_PANEL
CB858-COVER_BACK COVER_BACK - Back cover of printer, it is usually removed to clear paper jams. - CB858-COVER_BACK
CB858-COVER_CARTRIDGE COVER_CARTRIDGE - This is the cover/ door that is opened to remove the cartridge(s) - usually, when this door opens the carriage moves. - CB858-COVER_CARTRIDGE
CB858-COVER_MAIN COVER_MAIN - This is the main cover of the printer. it is the biggest piece of plastic the printer is made off. - CB858-COVER_MAIN
CB858-DEFLECTOR DEFLECTOR - Paper deflector - guides paper out of dispose assembly - through the internal paper path cover. paper deflector - directs paper from the media chassis to the print section of the printer chassis assembly - CB858-DEFLECTOR
CB858-DISPLAY DISPLAY - Status led display (LCD display assembly). - CB858-DISPLAY
CB858-DOOR_CARRIAGE DOOR_CARRIAGE - Main front access door - covers the top of the printer and provide access to the carriage when open. - CB858-DOOR_CARRIAGE
CB858-DOOR_CARTRIDGE DOOR_CARTRIDGE - Small front access door (drop down door) - for accessing print cartridge window - for print cartridge access door. - CB858-DOOR_CARTRIDGE
CB858-DOOR_REAR DOOR_REAR - Rear cleanout door assembly - rear paper jam clean out door assembly. - CB858-DOOR_REAR
CB858-DRIVE_ASSY DRIVE_ASSEMBLY - Paper drive roller kit - includes roller assembly, bushings, gear on roller, transmission gear kit, encoder disc, end thrust (axial) spring. - CB858-DRIVE_ASSY
CB858-DRIVE_ASSY_ADF DRIVE_ASSY_ADF - Media chassis assembly (paper drive) - moves paper from ADF assembly to scanner assembly - includes media chassis, rollers, gears, flag, sensor, deflector, cable, springs - CB858-DRIVE_ASSY_ADF
CB858-DUPLEXER DUPLEXER - Auto duplexer assembly - provides double sided printing capability - CB858-DUPLEXER
CB858-ENCODER ENCODER - Encoder spring - provides tension for encoder strip - CB858-ENCODER
CB858-ENCODER_DISK ENCODER_DISK - Disk encoder - helps to provide position information of the paper - CB858-ENCODER_DISK
CB858-ENCODER_STRIP ENCODER_STRIP - Encoder strip - carriage position sensor reference - CB858-ENCODER_STRIP
CB858-EXTENDER_ADF EXTENDER_ADF - Paper extension for the automatic document feeder (ADF) input tray - CB858-EXTENDER_ADF
CB858-EXTENDER_INPUT EXTENDER_INPUT - Tray extension assembly (stopper) - tray with a paper stop on the input tray - extends to accomodate different media lenths - CB858-EXTENDER_INPUT
CB858-EXTENDER_OUTPUT EXTENDER_OUTPUT - Paper exit tray extension - CB858-EXTENDER_OUTPUT
CB858-FAN_PC_BRD FAN_PC_BOARD - Fan to cool power supply unit - CB858-FAN_PC_BRD
CB858-FAN_VACCUM FAN_VACCUM - Vacuum fan assembly - CB858-FAN_VACCUM
CB858-FEED_ROLLERS FEED_ROLLERS - Feed roller assembly - includes frame asembly, shaft with rollers, and encoder disk - CB858-FEED_ROLLERS
CB858-FEED_ROLLERS_ADF FEED_ROLLERS_ADF - ADF feed roller kit - includes all rollers that feed paper through the feeder. - CB858-FEED_ROLLERS_ADF
CB858-FLAG_ADF FLAG_ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly - CB858-FLAG_ADF
CB858-FLAG_PAPER FLAG_PAPER - OOPS flag - out of paper sensor - CB858-FLAG_PAPER
CB858-FORMATTER FORMATTER - Formatter board assembly - CB858-FORMATTER
CB858-FRONT_PANEL FRONT_PANEL - Front panel assembly - includes lcd and actuator buttons - CB858-FRONT_PANEL
CB858-GEAR_ASSY GEAR_ASSEMBLY - ADF gear assembly driven by ADF main motor - CB858-GEAR_ASSY
CB858-GEAR_CLUSTER GEAR_CLUSTER - Cluster gear, large gear on service station - CB858-GEAR_CLUSTER
CB858-GEAR_DOUBLE GEAR_DOUBLE - Transfer gear - has double gear attached on service station - CB858-GEAR_DOUBLE
CB858-GEAR_MAIN GEAR_MAIN - Paper pickup drive assembly - gear assembly located on right side of paper pickup assembly. gear moves the main paper pick up roller. - CB858-GEAR_MAIN
CB858-GEAR_STATION GEAR_STATION - Gears on shaft of spittoon station - CB858-GEAR_STATION
CB858-GLASS_ADF_WINDOW GLASS_ADF_WINDOW - Small glass piece used when scanning - copying - faxing with ADF feeder. - CB858-GLASS_ADF_WINDOW
CB858-GLASS_ASSY GLASS_ASSEMBLY - Main top copier glass assembly. - CB858-GLASS_ASSY
CB858-GUIDE_PAPER GUIDE_PAPER - Upper paper guide - spring loaded flat plate that presses the media against the top of the feed roller assembly - caution: this part can easily be broken - CB858-GUIDE_PAPER
CB858-HOLDER HOLDER - Ink cartridge holder - located on carriage unit, holder secures ink cartridge in place. - CB858-HOLDER
CB858-IDLER IDLER - Scanner belt idler assembly - maintains scannter belt tension. - CB858-IDLER
CB858-INK_DLVRY INK_DELIVERY_SYSTEM - RIDS assembly - replaceable ink delivery system - transports ink from ink supply station to carriage assembly - CB858-INK_DLVRY
CB858-INK_SUPPLY_STATION INK_SUPPLY_STATION - Ink supply service station (iss) assembly - CB858-INK_SUPPLY_STATION
CB780-40012 LCD - Display LCD assembly - For the OfficeJet J4580 All-in-One printer series - CB780-40012
CB858-MOTOR_ADF MOTOR_ADF - ADF motor unit - drives ADF rollers on the feeder assembly - CB858-MOTOR_ADF
CB858-MOTOR_CARRIAGE MOTOR_CARRIAGE - Carriage motor - motor that drives the carriage assembly - CB858-MOTOR_CARRIAGE
CB858-MOTOR_SCANNER MOTOR_SCANNER - Scanner unit motor - drives the scanner unit to scan documents to be copied, fax, or scanned. - CB858-MOTOR_SCANNER
CB858-MTR_SRVCE_STATION MOTOR_SERVICE_STATION - Service station stepper motor (does not include cable) - moves the rack vertically in the service station assembly - CB858-MTR_SRVCE_STATION
CB858-OVERLAY OVERLAY - Overlay unit which covers the control button or display (english overlay only), control panel or display sold seperately. - CB858-OVERLAY
CB858-PAD_ADF PAD_ADF - Pad separator - (located on ADF unit) assembled from plastic and rubber components; to help in separating sheet of media during faxing, scanning, or copying. - CB858-PAD_ADF
CB858-PAD_TRAY PAD_TRAY - Pad separator - (located on tray) assembled from plastic and rubber components; to help in separating sheet of media during printing - CB858-PAD_TRAY
C2890-60107 PC_BOARD - Main PC Board for HP CZ296B - C2890-60107
CB858-PC_BRD PC_BOARD - Ink cartridge carriage assembly pc board - includes carriage pc board only - CB858-PC_BRD
CB858-PC_BRD_DC PC_BOARD - Internal power supply board - power cable plugs on this assembly, remove covers to install pc board. - CB858-PC_BRD_DC
CB858-PC_BRD_INTERFACE PC_BOARD - Internal print server lan interface board - plugs into peripheral eio. usefull for networking and multiple users. - CB858-PC_BRD_INTERFACE
CB858-PINCHWHEEL PINCHWHEEL - Pinch assembly kit - includes all required pinch wheels, pinchwheel mounts and springs - - CB858-PINCHWHEEL
8121-0889 POWER_CORD - Power cord (Black) - 2-wire, 18 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (Opt. 953) - 8121-0889
8121-0893 POWER_CORD - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For 240V in UK, Singapore, Malaysia, and Hong Kong, Opt. 955) - 8121-0893
8121-0895 POWER_CORD - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Europe, Opt. 954) - 8121-0895
8121-0898 POWER_CORD - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Argentina, Opt. 950) - 8121-0898
8121-0899 POWER_CORD - Power cord (Black) - 2-wire, 17 AWG, 0.5m (1.6ft) long - Has straight (F) C7 receptacle (For use in Chile, Opt. 959) - 8121-0899
8121-1015 POWER_CORD - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (Europe) - 8121-1015
8121-1028 POWER_CORD - Power cord (Black) - 18 AWG, 3-wire, 0.5m (1.64ft) long - Has straight (F) C13 receptacle (for South Africa and Bhutan) - 8121-1028
8121-1082 POWER_CORD - Pwr-cord opt-964 2 cond 0.5-m-lg rohs - 8121-1082
CB858-POWER_CORD POWER_CORD - Power module power cord- wall outlet cable to power module only. does not include power module. - CB858-POWER_CORD
0957-2242 POWER_MODULE - Power module - Input voltage 100-240VAC, 50/60Hz - Output voltage 32VDC, 625mA, 20 watts - Requires separate 2-wire power cord with C7 connector - 0957-2242
CB858-POWER_MDLE POWER_MODULE - World wide power module - includes power module and power module to printer cord - does not include outlet to power module cord - CB858-POWER_MDLE
CB858-POWER_MDLE_ASSY POWER_MODULE_ASSY - World wide power module - includes power module and power module to printer cord - also, include outlet to power module cord - CB858-POWER_MDLE_ASSY
CB858-POWER_SUPPLY POWER_SUPPLY - Power supply board (internal pwr supply unit in the office machine). - CB858-POWER_SUPPLY
CB858-POWER_SUPPLY_BRD POWER_SUPPLY_BOARD - High voltage power supply board - CB858-POWER_SUPPLY_BRD
CB858-PRINT_MCHNSM PRINT_MECHANISM - Print mechanism assembly - complete mechanism with carriage movement, paper picking and service station - does not include covers, printer base, print heads, ink cartridges, or any consumables. - CB858-PRINT_MCHNSM
CB858-PULLEY PULLEY - Paper pick up tray motor pulley. - CB858-PULLEY
CB858-PULLEY_ADF PULLEY_ADF - ADF feeder motor pulley - CB858-PULLEY_ADF
CB858-ROD_CARRIAGE ROD_CARRIAGE - Carriage rod - shaft that the carriage assembly rides on - CB858-ROD_CARRIAGE
CB858-ROD_SCANNER ROD_SCANNER - Scanner rod - shaft that the scanner assembly rides on - CB858-ROD_SCANNER
CB858-ROLLER_ADF ROLLER_ADF - Feeder ADF roller for picking up paper from ADF unit. - CB858-ROLLER_ADF
CB858-ROLLER_EXIT ROLLER_EXIT - Paper exit rollers - out put assembly. - CB858-ROLLER_EXIT
CB858-ROLLER_PICKUP ROLLER_PICKUP - Pick up roller assembly for paper bottom tray. Lower feed roller assembly - for lower paper input tray - CB858-ROLLER_PICKUP
CB858-SCANNER SCANNER - ADF scanner (optical) assembly - includes the chassis assembly, scanner lens assembly (includes the charge coupled device (ccd)), the scanning lamp, ADF analog processor board, and ADF inverter board - major portion of the ADF main assembly. this is not t - CB858-SCANNER
CB858-SCANNER_ASSY SCANNER_ASSEMBLY - Scanner assembly includes the entire ADF unit and entire scanner unit. - CB858-SCANNER_ASSY
CB858-SCANNER_BELT SCANNER_BELT - Scanner belt attaches from the scanner to the scanner motor. - CB858-SCANNER_BELT
CB858-SCANNER_CABLE SCANNER_CABLE - Flex circuit cable which connects to the scanner assembly. also known as flat cable, this cable moves along with the scanner unit (side to side) as it scans documents. - CB858-SCANNER_CABLE
CB858-SCANNER_MOTOR SCANNER_MOTOR - Scanner driving motor - CB858-SCANNER_MOTOR
CB858-SCANNER_UNIT SCANNER_UNIT - Scanner unit includes the entire scanner base, but not the ADF portion. - CB858-SCANNER_UNIT
CB858-SENSOR_ADF SENSOR_ADF - Photo-sensor assembly - includes the sensor and mounting bracket - paper pickup roller home position sensor - activated by the sensor flag on the pickup roller assembly - mounts on the front frame of the ADF paper pickup assembly - CB858-SENSOR_ADF
CB858-SENSOR_EXIT SENSOR_EXIT - Exit media sensor sv - CB858-SENSOR_EXIT
CB858-SENSOR_OPEN SENSOR_OPEN - Door sensor assembly - open door sensor - CB858-SENSOR_OPEN
CB858-SENSOR_OUT SENSOR_OUT - OOPS sensor - out of paper sensor - detects the presence of the paper in the printer tray - CB858-SENSOR_OUT
CB858-SENSOR_SPOT SENSOR_SPOT - Spot sensor assembly is attached to the carriage assembly. - CB858-SENSOR_SPOT
CB858-SEPARATOR SEPARATOR - Pad separator - assembled from plastic and rubber components; to help in separating sheet of media during printing from bottom trays. - CB858-SEPARATOR
CB858-SERVICE_STATION SERVICE_STATION - Service station assembly - for conditioning the printheads when the carriage is in its home position - CB858-SERVICE_STATION
CB858-SLED_ASSY SLED_ASSEMBLY - Sled assembly - white plastic piece with spring, wipers and boot (assembly that the ink cartridge parks on) - mounts on top of the service station assembly - CB858-SLED_ASSY
CB858-SLIDER SLIDER - Carriage base slider - plastic piece on the front end of the carriage that allows the carriage to slide side to side. - CB858-SLIDER
CB858-SPEAKER SPEAKER - Speaker assembly - includes speaker cable. - CB858-SPEAKER
CB858-SPITTON SPITTON - Spittoon base - the bottom and main housing of the service station assembly - holds any residual ink from the print cartridge cleaning process - CB858-SPITTON
CB858-SPRING_CMPRSN SPRING_COMPRESSION - Compression spring - on pulley wedge, for carriage belt tension - CB858-SPRING_CMPRSN
CB858-TRAILING_CBL TRAILING_CABLE - Trailing cable for scanner - cable connects from scanner to pc board. - CB858-TRAILING_CBL
CB780-60045 TRAY - Paper input tray - to load printer paper into this assembly ( paper tray unit). - CB780-60045
CB783-60007 TRAY - Input tray assembly - Holds paper supply for printer - CB783-60007
CB858-TRAY_ASSY TRAY_ASSEMBLY - Paper input tray assembly for loading paper (bottom). - CB858-TRAY_ASSY
CB858-TRAY_ASSY_CVR TRAY_ASSEMBLY_COVER - Tray cover - the top cover for the paper pick up tray unit. - CB858-TRAY_ASSY_CVR
CB858-TRAY_BASE TRAY_BASE - Tray base- bottom base of the paper input tray. - CB858-TRAY_BASE
CB858-WINDOW WINDOW - Top/front access door assembly - print cartridge access door window. - CB858-WINDOW

bottom bar

Helpfull Links:   | HP Parts 1 2 3 4 5 | SmartSearch |
Home
       About Us       Contact Us        Support       Site Map   

Copyright© 2014 Partshere.com   Privacy Policy  Terms and Conditions     Send us your Feedback