HP printer parts available for
CC418A HP LaserJet 1020 Plus Printer
|
| 8121-0868 |
Cable - Universal Serial Bus (USB) interface cable (Black) - Type 'A' connector to type 'B' connector - 1.83m (6.0ft) long -
8121-0868 |
| Q5914-60102 |
Cable - Cable assembly - Connects the formatter board to the wireless network module -
Q5914-60102 |
| UG605E |
Care_Pack - HP 2 year Care Pack w/Next Day Exchange for Printers -
UG605E |
| UG608E |
Care_Pack - HP 3 year Care Pack w/Next Day Exchange for Printers -
UG608E |
| UH609E |
Care_Pack - HP 4 year Care Pack w/Next Day Exchange for Printers -
UH609E |
| US284E |
Care_Pack - HP Basic Installation Service for one consumer printer with wireless capability -
US284E |
| US285E |
Care_Pack - HP Premium Installation Service with wireless network setup for up to three PCs and/or printers -
US285E |
| Q2612-67901 |
Cartridge - Black toner cartridge - Will print approximately 2,000 pages based on a 5% print density -
Q2612-67901 |
| Q2612A |
Cartridge - Black toner cartridge - Will print approximately 2,000 pages based on a 5% print density -
Q2612A |
| RC1-1957-000CN |
Clip - Door link clip (Stopper) - Secures the toner cartridge access door to the internal link arm -
RC1-1957-000CN |
| Q5912-40002 |
Cover - Connector cover (plug) - Covers the rear-facing upper hole on the right side cover on the LaserJet 1022, or the unused network connector (same location) on the LaserJet 1022n and 1022nw -
Q5912-40002 |
| RC1-1985-000CN |
Cover - Lower rear cover assembly - Covers the paper pickup assembly - Larger of the two covers on the rear of the printer -
RC1-1985-000CN |
| RC1-5520-000CN |
Cover - Rear cover assembly - Stamped metal plate - Covers the upper rear of the printer -
RC1-5520-000CN |
| RC1-5524-000CN |
Cover - Left side cover - Has cutouts for the power cord receptacle and power switch -
RC1-5524-000CN |
| RC1-5629-000CN |
Cover - Cover left for HP LaserJet 1018 Series -
RC1-5629-000CN |
| RL1-0784-000CN |
Cover - Front cover - Has recess for the printer nameplate and large cutout for the input paper tray -
RL1-0784-000CN |
| RL1-1586-000CN |
Cover - Front cover for HP LaserJet 1018 Series -
RL1-1586-000CN |
| RM1-2036-000CN |
Cover - Top cover assembly - Rear Fuser Assembly (face-down) cover with curved ribbed pieces on the bottom -
RM1-2036-000CN |
| RM1-2081-000CN |
Cover - Right cover assy -
RM1-2081-000CN |
| RM1-4370-000CN |
Cover - Face down cover -
RM1-4370-000CN |
| RM1-0659-000CN |
Extender - Paper output tray assembly (Fold open tray extender) - Includes the tray, pull-out extender and paper stop -
RM1-0659-000CN |
| RM1-2055-000CN |
Extender - Paper output tray extender - Mounts to the top of the front cover assembly -
RM1-2055-000CN |
| RM1-2049-000CN |
Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 110VAC to 127VAC (+/- 10%) operation - Mounts in the upper rear of the printer -
RM1-2049-000CN |
| RM1-2050-000CN |
Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220VAC to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer -
RM1-2050-000CN |
| RM1-2086-000CN |
Fuser_Assembly - Fuser Assembly (For 110V to 127VAC (+/- 10%) operation) - Bonds the toner to the paper with heat - Mounts in the upper rear of the printer -
RM1-2086-000CN |
| RM1-2096-000CN |
Fuser_Assembly - Fuser Assembly - Bonds toner to paper with heat - For 220V to 240VAC (+/- 10%) operation - Mounts in the upper rear of the printer -
RM1-2096-000CN |
| RM1-2033-030CN |
Laser_Scanner - Laser/scanner assembly - Mounts on the front support shelf on the printer frame assembly - Mounts just below the engine control unit PC board -
RM1-2033-030CN |
| RM1-2084-000CN |
Laser_Scanner - Laser/scanner assembly - Does NOT include the laser shutter arm -
RM1-2084-000CN |
| RM1-3956-000CN |
Laser_Scanner - Laser/scanner assembly - Does NOT include the laser shutter arm -
RM1-3956-000CN |
| Q5911-90945 |
Manual - LaserJet 1010, 1012, 1015, and 1020 combined service manual -
Q5911-90945 |
| Q5912-90901 |
Manual - Combined service manual for the LaerJet 1022, 1022n, and 1022nw -
Q5912-90901 |
| Q5914-60001 |
Module - Wireless network module - 802.11b/g Ethernet print server module - Mounts on the right side plate -
Q5914-60001 |
| CB419-00002 |
NamePlate - Label-Nameplate HP LaserJet 1018 -
CB419-00002 |
| Q5911-00001 |
NamePlate - LaserJet 1020 Nameplate - Mounts in the recess on the upper left corner of the front cover -
Q5911-00001 |
| Q5912-00005 |
NamePlate - LaserJet 1022 Nameplate - Mounts in the recess on the front cover -
Q5912-00005 |
| Q5913-00001 |
NamePlate - LaserJet 1022n Nameplate - Mounts in the recess on the front cover -
Q5913-00001 |
| Q5914-00002 |
NamePlate - LaserJet 1022nw Nameplate - Mounts in the recess on the front cover -
Q5914-00002 |
| CB419-90938 |
Other_Parts - Mnl, lj1018 svc -
CB419-90938 |
| RM1-0648-000CN |
Pad - Separation pad assembly - Bracket with spring loaded pad assembly -
RM1-0648-000CN |
| RM1-2048-000CN |
Pad - Separation pad assembly - Includes the holder assembly, separation pad, and spring - The assembly is inserted into the bottom rear of the printer -
RM1-2048-000CN |
| HPJ1124 |
Paper - Media for HP CB493A -
HPJ1124 |
| HPJ1424 |
Paper - Media for HP Q7815A -
HPJ1424 |
| HPM1120 |
Paper - Media for HP C8991B -
HPM1120 |
| CB406-60001 |
PC_Board - Formatter board - Has integrated USB interface and connector - Mounts on the right side plate -
CB406-60001 |
| CB407-60002 |
PC_Board - Formatter board - Has integrated USB interface and 10/100 Ethernet network, plus the USB and RJ-45 interface connectors - Mounts on the right side plate -
CB407-60002 |
| CB409-60001 |
PC_Board - Formatter board - Has integrated USB interface and connector - Mounts on the right side plate -
CB409-60001 |
| CB440-60001 |
PC_Board - Formatter board - Has integrated USB interface only, no Ethernet network,for USB and Ethernet interface connectors order CB407-60002. -
CB440-60001 |
| RM1-2309-000CN |
PC_Board - Engine Control Unit (ECU) PC board - Provides timing and control of the printer motor and functions - Mounts on the front support shelf of the printer frame assembly (just above the laser/scanner assembly) -
RM1-2309-000CN |
| RM1-2314-000CN |
PC_Board - Print engine control board - Provides timing and control of the printer motors and functions -
RM1-2314-000CN |
| RM1-2043-000CN |
Pickup_Assembly - Paper pickup assembly - Large black plastic structure with the 'D' shaped pickup roller, feed roller, sensor flags, pickup solenoid, and associated gears - Mounts in the lower rear of the printer -
RM1-2043-000CN |
| RM1-2091-020CN |
Pickup_Assembly - Paper pickup assembly - Includes the pickup roller, feed roller assembly, drive gears, plastic housing and other associated parts - Does NOT include the separation pad assembly -
RM1-2091-020CN |
| 8120-6800 |
Power_Cord - Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) -
8120-6800 |
| 8120-6809 |
Power_Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) -
8120-6809 |
| 8120-6811 |
Power_Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) -
8120-6811 |
| 8120-6812 |
Power_Cord - Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 120V in the USA, Canada, Mexico, Philippines, and Taiwan) -
8120-6812 |
| 8120-6813 |
Power_Cord - Power cord (dove gray) - 2.3M (7.5ft) long - Has straight (F) receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) -
8120-6813 |
| 8120-8881 |
Power_Cord - Power cord (Black) - 17 AWG, three conductor, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Denmark) -
8120-8881 |
| 8120-8885 |
Power_Cord - Power cord (Black) - 17 AWG, 3-wire, 1.0m (3.3ft) long - Has straight (F) C13 receptacle (for 220VAC in Switzerland) -
8120-8885 |
| RM1-2310-000CN |
Power_Supply - Power supply assembly - Large PC board which includes the AC power receptacle and power switch - For 110VAC to 127VAC (+/- 10%) operation - Mounts on the left side of the printer -
RM1-2310-000CN |
| RM1-2311-000CN |
Power_Supply - Power supply assembly - Large PC board which includes the AC power receptacle and power switch - For 220VAC to 240VAC (+/- 10%) operation - Mounts on the left side of the printer -
RM1-2311-000CN |
| RM1-2315-000CN |
Power_Supply - Power supply board assembly - Includes the input power cord connector and power swith - For 110V to 127VAC (+/- 10%) operation -
RM1-2315-000CN |
| RM1-2316-000CN |
Power_Supply - Power supply board assembly - Includes the input power cord connector and power swith - For 220V to 240VAC (+/- 10%) operation -
RM1-2316-000CN |
| RL1-0266-000CN |
Roller - Paper pickup roller (D-shaped roller) - Picks up media from the paper input tray -
RL1-0266-000CN |
| RM1-2062-000CN |
Roller - Transfer roller assembly - Steel shaft with black spongy roller and drive gear - Mounts on top of the paper pickup assembly -
RM1-2062-000CN |
| RM1-2093-000CN |
Roller - Transfer roller assembly - Transfers static charge to the media being printed on -
RM1-2093-000CN |
| 0515-4679 |
Screw - M3 pan-head phillips screw with washer - 6mm long -
0515-4679 |
| CC418A-Manual |
Service_Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. For LaserJet 1020 Plus -
CC418A-Manual |
| CC418A-Repair |
Service_Printer - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. For LaserJet 1020 Plus -
CC418A-Repair |
| RM1-2035-000CN |
Tray - Paper input tray assembly - Includes the fold-down tray, paper stop, and tray extender - Mounts to the bottom of the opening on the front cover assembly -
RM1-2035-000CN |
| RM1-2079-000CN |
Tray - Paper input tray assembly - Includes the tray base and pull-out paper support extension (Dust cover NOT Included) -
RM1-2079-000CN |
| RM1-4369-000CN |
Tray - Paper pick-up tray assy (ma -
RM1-4369-000CN |
Buy the full service manual
View full list of service parts