| CB414-67919 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, mylar replacement kit, white scan background, mylar holder assembly, white mylar backing with 2 springs, and left cover |
| CB414-67926 |
ADF - ADF assembly - For the A size (8.5 x 11-inches) scanner assembly - Includes rear cover, cable, input tray, front cover,white scan background, and left cover |
| CC476-67909 |
ADF - ADF assembly - For the Legal size (8.5 x 14-inches) scanner assembly - Includes rear cover, cable, input tray, front cover, mylar replacement kit, white scan background, mylar holder assembly, white mylar backing with 2 springs, and left cover |
| CC476-67912 |
ADF - ADF assembly - For the Legal size (8.5 x 14-inches) scanner assembly - Includes rear cover, cable, input tray, front cover, mylar replacement kit, white scan background, mylar holder assembly, white mylar backing with 2 springs, and left cover |
| CC476-67913 |
ADF - ADF assembly - For the Legal size (8.5 x 14-inches) scanner assembly - Includes rear cover, cable, input tray, front cover, mylar replacement kit, white scan background, mylar holder assembly, white mylar backing with 2 springs, and left cover |
| CB414-67903 |
Adf Input Tray - ADF Tray : ADF input paper tray assembly - Holds 50 sheets of paper. Automatic Document Feeder (ADF) Input Tray For Hewlett-packard (HP) Printers |
| RC1-4055-000CN |
Arm - Door arm - White plastic arm that connects to left side cartridge access door |
| RC2-0575-000CN |
Arm - Arm paper - Includes sensor |
| RC1-0922-000CN |
Bushing - Roller bushing - Right side transfer roller bushing |
| RC1-3665-000CN |
Bushing - Bushing/shaft retainer (Plastic) - Small plastic cylinder with four nubs that twist - Locks into the side frame |
| RC1-4081-000CN |
Bushing - Bushing for HP HP LaserJet M3027 MFP |
| RC1-4189-000CN |
Bushing - Gear stopper - Small bushing between right side of registration assembly and registration roller drive gear |
| RC2-0701-000CN |
Bushing - Inner bushing - Rides on the large white 201-tooth drive gear. |
| RC2-0631-000CN |
Button - Power on/off switch - Located on the front right side of the printer. |
| 8120-8907 |
Cable - Telephone cable (Australian) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Australian phone plug on other end |
| 8120-8908 |
Cable - Telephone cable (Korea) - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end, Korea phone plug on other end |
| 8120-8911 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) |
| 8120-8912 |
Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end |
| 8120-8913 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) |
| 8120-8914 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) |
| 8120-8915 |
Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) |
| 8120-8918 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) |
| 8120-8920 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Turkey) |
| 8120-8921 |
Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) |
| 8120-8922 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) |
| 8120-8923 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) |
| 8121-0811 |
Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
| 8121-0844 |
Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) |
| 8121-1042 |
Cable - Telephone cable - 3.0m (9.8ft) long (Gray) - RJ-11 plug on one end (Hong Kong) |
| RG5-1928-000CN |
Cable - Registration cable assembly - Includes 7P and 3P connectors |
| RM1-4053-000CN |
Cable - Laser scanner motor cable - Connects ECU to scanner motor (M3). |
| RM1-4060-000CN |
Cable - Cable assembly - For tray 2 paper pickup sensor |
| RM1-4062-000CN |
Cable - Option input tray cable |
| CB414-60148 |
Cage - Sheet metal cage - For the fax module |
| RC1-4114-000CN |
Cam - Cam - Located between large white 201 tooth gear and drive release lever |
| RC1-4137-020CN |
Cam - Contact cam - Vertical piece that inserts into protective plate. |
| U2010E |
Care Pack - HP Network Installation mid-range LaserJet Multifunction printer Service |
| UE685E |
Care Pack - HP 3 year Next business day Onsite LaserJet M3035MFP Hardware Support |
| UE686E |
Care Pack - HP 4 year Next business day Onsite LaserJet M3035MFP Hardware Support |
| UE687E |
Care Pack - HP 5 year Next business day Onsite LaserJet M3035MFP Hardware Support |
| UE688E |
Care Pack - HP 3 year 4 hour response 9x5 Onsite LaserJet M3035MFP Hardware Support |
| UE689E |
Care Pack - HP 4 year 4 hour response 9x5 Onsite LaserJet M3035MFP Hardware Support |
| UE690E |
Care Pack - HP 5 year 4 hour response 9x5 Onsite LaserJet M3035MFP Hardware Support |
| UE691E |
Care Pack - HP 3 year 4 hour response 13x5 Onsite LaserJet M3035MFP Hardware Support |
| UE692E |
Care Pack - HP 4 year 4 hour response 13x5 Onsite LaserJet M3035MFP Hardware Support |
| UE693E |
Care Pack - HP 5 year 4 hour response 13x5 Onsite LaserJet M3035MFP Hardware Support |
| UE694PE |
Care Pack - HP 1 year Post Warranty 4 hour response 9x5 Onsite LaserJet M3035MFP Hardware Support |
| UE695PE |
Care Pack - HP 1 year Post Warranty 4 hour response 13x5 Onsite LaserJet M3035MFP Hardware Support |
| UE696PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite LaserJet M3035MFP Hardware Support |
| UL405E |
Care Pack - HP 3 year Next business day Onsite Defective media retention LaserJet M3035MFP Support |
| UL406PE |
Care Pack - HP 1 year Post Warranty Next business day Onsite Defective media retention LJ M3035MFP Support |
| UL624E |
Care Pack - HP Secure Hard Disk Installation and Startup Service |
| UT815PE |
Care Pack - HP 2 year Post-Warranty Next business day onsite LaserJet M3035 MFP Hardware Support |
| UT977E |
Care Pack - HP 4 year Next business day Onsite + Defective Media Retention LaserJet M3035 MFP Support |
| UU858E |
Care Pack - HP 5 year Next business day Onsite + Defective Media Retention LaserJet M3035 MFP Support |
| UU926PE |
Care Pack - HP 1 year Post Warranty Phone Assist Mid-range Multifunction and High-end LaserJet printer Service |
| Q7432A |
Cartridge - HP Staple Cartridge Pack - Two cartridges at 1,500 staples each |
| Q7551-67901 |
Cartridge - Black toner cartridge - Prints approximately 6,500 pages per cartridge |
| Q7551-67901 |
Cartridge - Black toner cartridge - Prints approximately 6,500 pages per cartridge |
| Q7551-67902 |
Cartridge - Black toner cartridge - Prints approximately 13,000 pages per cartridge |
| Q7551-67902 |
Cartridge - Black toner cartridge - Prints approximately 13,000 pages per cartridge |
| WT2-5694-000CN |
Clamp - Snap-in cable clamp |
| WT2-5056-000CN |
Clip - Cable clip - `C` shaped White plastic |
| WT2-5678-000CN |
Clip - Cable clip - White plastic push-in clip with mounting pin |
| WT2-5812-000CN |
Clip - Cable clip - `C` shaped white plastic clip |
| XD9-0232-000CN |
Clip - E-ring keeper - Attaches to drive end of registration roller to secure cluster gear |
| VS1-7257-007CN |
Connector - Drawer connector - Connector located on top of tray assembly frame (right side), which connects tray assemblies to each other |
| RC1-4060-000CN |
Contact - Grounding contact - Tiny U-shaped metal cartridge grounding contact - Contacts copper grounding strip on left side of toner cartridge |
| RM1-4054-000CN |
Contact - Contacts and cable - For toner cartridge memory tag - Connects to ECU memory control. |
| CB414-60101 |
Control Panel - Control panel assembly - Control buttons and display located on top front of printer;Click to order the functional equivalent: CB414-60157 |
| CB414-60157 |
Control Panel - Mirror Control Panel/ Control panel assembly - Control buttons and display located on top front of printer |
| RM1-3775-000CN |
Controller - Engine controller assy |
| CB414-00021 |
Cover - Formatter metal cover - Metal box that holds and protects the formatter board |
| CB414-00043 |
Cover - Formatter metal cover - Metal box that holds and protects the formatter board |
| CB414-60150 |
Cover - I/O metal face plate cover |
| CB414-60192 |
Cover - Formatter metal cover - Metal box that holds and protects the formatter board |
| CB414-67902 |
Cover - Cover : Plastic cover - For the automatic document feeder (ADF) copy module |
| RC1-3936-020CN |
Cover - Registration roller assembly cover |
| RC1-4108-000CN |
Cover - Cover for main motor M1 - Located on lower right side of printer |
| RC2-0579-000CN |
Cover - Gear cover - Mounts on the left side of the printer chassis. |
| RC2-0603-000CN |
Cover - Right lower cover - Horizontal plastic cover - Mounts on the right lower side of the printer. |
| RC2-0605-000CN |
Cover - Right upper cover - Used to cover the top side of the formatter board. |
| RC2-0612-000CN |
Cover - Engine controller cover - Vertical cover located on the right back side of the printer. |
| RC2-0722-000CN |
Cover - Right side cover - Provides acces to DIMMs - Located on the right side of the printer. |
| RC2-0727-000CN |
Cover - Stapler cartidge cover - Located on the right side of the printer - Replaces the stapler door for devices without staplers. |
| RC2-0739-000CN |
Cover - Sensor cable cover - Plastic cover that protects the face up sensor cable |
| RL1-1723-000CN |
Cover - Right front cover - Vertical plastic cover - Mounts on the right side of the printer. |
| RM1-3723-000CN |
Cover - Multi-purpose input tray cover assembly - Includes pull-out and flip-out tray extensions. |
| RM1-3724-000CN |
Cover - Rear cover assembly - Includes rear door assembly |
| RM1-3772-000CN |
Cover - Top cover assembly - Mounts below the ADF and holds the paper when it¦s printed |
| RM1-3772-030CN |
Cover - Top cover assembly - Mounts below the ADF and holds the paper when it´s printed |
| RM1-3773-000CN |
Cover - Left cover assembly - Protects the left side of the printer |
| RM1-3776-000CN |
Cover - Right front cover - Vertical plastic cover - Mounts on the right side of the printerRight front cover - Vertical plastic cover - Mounts on the right side of the printer Replaced: RL1-1723-000CN |
| RM1-3790-000CN |
Cover - Stapler cartidge cover - Located on the right side of the printer. |
| RM1-3722-000CN |
Door - Cartridge access door assembly - Provides access to the cartridges |
| 0950-4753 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height |
| 5851-3833 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935. |
| CB414-67922 |
Drive Assembly - Hard disk drive - Includes power and data cable |
| RM1-1522-020CN |
Drive Assembly - Drive release assembly |
| RM1-3712-000CN |
Drive Assembly - Main drive assembly - Mounts on the right side of the printer - Metal plate with gears attached - Also known as main gear drive assembly. |
| RC1-4128-020CN |
Duct - Plastic duct that vents air from the lower right front fan to the laser/scanner. |
| RC2-0590-000CN |
Duct - Cartridge duct - Small vent duct to route air from the fan (FM1) to the cartridge area. |
| RK2-1497-000CN |
Fan - Cooling fan - Located on the right side of the printer. |
| RK2-1499-000CN |
Fan - Cooling fan (FM2) - Located on the left side of the printer - Small fan that cools the fuser assembly and print cartridge area |
| RM1-3759-000CN |
Feeder - Lower paper feed assembly - Vertical transfer unit - Transfers paper from pickup assembly up to the printer input. |
| RC1-4027-000CN |
Flag - Sensor lever - Top of page sensor flag - Used to detect edge of paper |
| RM1-3769-000CN |
Flag - Sensor flag assembly for tray 2 - Short rod with one flag on it - Mounts next to the pickup roller assembly |
| RA0-1003-000CN |
Foot - Rubber foot - For bottom of printer - Three used |
| 5851-3996 |
Fuser Assembly - Fusing assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear |
| RM1-3717-000CN |
Fuser Assembly - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat - Includes 20-tooth gear |
| RM1-3717-020CN |
Fuser Assembly - 110V Fuser |
| RM1-3740-000CN |
Fuser Assembly - Fusing assembly - Bonds toner to paper by heat - For 110VAC to 127VAC operation |
| RM1-3740-030CN |
Fuser Assembly - Fuser Assembly - For 110-127 VAC - Bonds toner to paper by heat |
| RM1-3741-030CN |
Fuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC operation - Bonds toner to paper with heat |
| RM1-3761-000cn |
Fuser Assembly - Fuser Assembly - For 220 VAC to 240 VAC - Bonds toner to paper with heat - Includes 20-tooth gear |
| RM1-3761-020CN |
Fuser Assembly - Assembly-Fuser 220v |
| CB414-67923 |
Gear - Replacement gear kit - Includes 17,17,19 and 20 tooth gears |
| RC2-0657-000CN |
Gear - Fuser thrust stopper - Located on the fuser drive assembly. |
| RM1-3714-000CN |
Gear - Gear - Pick up roller gear assembly |
| RU5-0366-000CN |
Gear - Gear - 30 tooth - Attaches to right side end of Tray 1 pickup roller shaft |
| RU5-0394-000CN |
Gear - Gear - 12-tooth Gear - Goes on the drive release assembly |
| RU5-0400-000CN |
Gear - 12 tooth gear - On left side of registration roller assembly |
| RU5-0409-000CN |
Gear - Registration roller gear - Mounts on the end of the registration roller - 14-tooth gear |
| RU5-0950-000CN |
Gear - Gear - 201-tooth gear |
| RU5-0951-000CN |
Gear - Gear - 16-tooth gear |
| RU5-0955-000CN |
Gear - Gear - 42-tooth - Goes with the pendulum assembly |
| RU5-0956-000CN |
Gear - Gear - 20/20 tooth - Goes on the fuser drive assembly |
| RU5-0957-000CN |
Gear - Replacement gear kit - Includes 17,17,19 and 20 tooth gears |
| RU5-0958-000CN |
Gear - Replacement gear kit - Includes 17,17,19 and 20 tooth gears |
| RU5-0959-000CN |
Gear - Replacement gear kit - Includes 17,17,19 and 20 tooth gears |
| RU5-0960-000CN |
Gear - Gear - 31-tooth gear |
| RU5-0962-000CN |
Gear - Gear - 65-tooth gear |
| RA0-1172-000CN |
Gear Assembly - 17 tooth gear assembly - Includes the 17 tooth gear mounted on a black plastic lever/bracket |
| RM1-3746-000CN |
Gear Assembly - Fuser drive side plate and gear assembly - Drive gear assembly and mounting plate for fuser - Located on right side of printer |
| RM1-3748-000CN |
Gear Assembly - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability. |
| RC1-4085-000CN |
Ground - Grounding plate - High voltage power supply grounding plate - Attaches to left rear of power supply |
| RC1-3935-000CN |
Guide - Feed guide assembly - Mounts above transfer roller assembly |
| RC1-4056-000CN |
Guide - Door arm guide - White plastic guide for cartridge door lever |
| RC1-4083-000CN |
Guide - Papre guide - Paper guide under registration roller assembly |
| RC1-4096-000CN |
Guide - Guide assembly - Duplexer portion paper input guide assembly |
| RC2-0492-000CN |
Guide - Cartridge guide - Right side toner cartridge guide |
| RC2-0559-000CN |
Guide - Cassette guide - Right side guide for media cassette. |
| RC2-0560-000CN |
Guide - Cassette guide - Right rear side cassette guide. |
| RC2-0561-000CN |
Guide - Right center side plate guide |
| RC2-0565-000CN |
Guide - Cassette guide - Left side guide for media cassette. |
| RC2-0566-000CN |
Guide - Cassette guide - Left rear side cassette guide. |
| RC2-0567-000CN |
Guide - Center guide - Left center guide plate. |
| RC2-0648-000CN |
Guide - Air guide - Located next to the cartridge duct. |
| RC2-0700-000CN |
Guide - Cartridge guide - Lower right side toner cartridge guide. |
| RC2-0703-000CN |
Guide - Cartridge guide - Upper left side toner cartridge guide |
| RC2-0704-000CN |
Guide - Cartridge guide - Lower left side toner cartridge guide |
| RM1-1506-000CN |
Guide - Position guide assembly - Guides the paper along the right side duplex path - Attaches just above power supply |
| RM1-3757-000CN |
Guide - Lower transfer guide assembly - Guides paper into transfer roller. |
| RM1-3760-000CN |
Guide - Paper feed guide assembly |
| 5851-3231 |
Hard Drive - Hard drive kit - 40GB hard drive with both plastic side rails |
| J7989A |
Hard Drive - Hard drive - High performance EIO serial ATA hard drive |
| RM1-4057-000CN |
Hardware - Cable harness - For paper delivery sensor and fuser thermistors. |
| RC1-4057-000CN |
Hinge - Tray hinge - Left side hinge for drop down Tray 1 assembly |
| RC1-4058-000CN |
Hinge - Tray hinge - Right side hinge for drop down Tray 1 assembly |
| RC1-3937-000CN |
Holder - Pad holder - Separation pad holder |
| RC1-4009-000CN |
Holder - Plate holder - Holds the left rear corner of the paper access plate (duplex pan) |
| RC1-4126-000CN |
Holder - Reader holder cover - Plastic housing that covers cartridge E-label reader and holder assembly |
| RC1-4127-000CN |
Holder - Reader holder - E-label reader holder - Housing that holds cartridge E-label reader |
| RC2-0562-000CN |
Holder - Holder - Plastic assembly that holds optional input connector. |
| RC2-0588-000CN |
Holder - Cable holder - Mounts on the main drive assembly. |
| RC2-0592-000CN |
Holder - Main fan holder - Plastic fan holder for main cooling fan (FM1) - Located on the upper right side of the printer. |
| RC2-0595-000CN |
Holder - Holder - Plastic assembly that holds interlock switch for cover. |
| RC2-0622-000CN |
Holder - Fan holder - Chassis left fan holder |
| RC2-0632-000CN |
Holder - Switch holder - Holds the power on/off switch. |
| RC2-0634-000CN |
Holder - Link switch holder - Plastic guide that holds power link arm in place. |
| RM1-1521-030CN |
Laser Scanner - Laser/Scanner assembly - Mounts on top of print structure |
| RC1-3939-000CN |
Lever - Paper sensor lever - Mechanical device that activates photo sensor PS902 Tray 1 paper sensor |
| RC1-4065-000CN |
Lever - Grounding contact lever - Lever on left side that is moved by contact when the toner cartridge is installed |
| RC1-4066-020CN |
Lever - Grounding contact lever - Lever on left side that pushes both contact springs against toner cartridge contacts on left side of cartridge |
| RC1-4066-050CN |
Lever - LEVER, GROUNDING CONTACTLEVER, GROUNDING CONTACT Replaced: RC1-4066-000CN |
| RC1-4115-000CN |
Lever - Coupling lever - White plastic lever between large white gear cam and drive release assembly |
| RC1-4116-000CN |
Lever - Drive release lever - |
| RC2-0705-000CN |
Lever - Lever drive release |
| RC2-0706-000CN |
Lever - Cartridge clamp lever - Attaches to upper left toner cartridge guide - Provides mechanical lock for toner cartridge |
| RC1-4117-000CN |
Link - Drive release link - |
| RC1-4125-000CN |
Link - Laser shutter link - Enables the laser scanner shutter by pressing up this link on the underside of the laser/scanner assembly |
| RC2-0633-000CN |
Link - Link switch - Metal arm that links power switch to power supply. |
| Q7715-67951 |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| RK2-1488-000CN |
Motor - Main motor (M1) - DC motor located on the inner left side of the printer |
| RK2-1489-000CN |
Motor - Stepping DC motor (M2) - Drives all fuser rollers and fuser drive assembly |
| CB414-60102 |
Overlay - Control planel overlay - Snaps on top of the control panel assembly (English) |
| CB414-60103 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (French) |
| CB414-60104 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian) |
| CB414-60105 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
| CB414-60106 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
| CB414-60107 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
| CB414-60108 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
| CB414-60109 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
| CB414-60110 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
| CB414-60111 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finland) |
| CB414-60112 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish);Click to order the functional equivalent: CB414-60102 |
| CB414-60113 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish) |
| CB414-60114 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian) |
| CB414-60115 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech) |
| CB414-60116 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
| CB414-60117 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese/Twi) |
| CB414-60118 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| CB414-60119 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Korean) |
| CB414-60120 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Japanese) |
| CB414-60121 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
| CB414-60122 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
| CB414-60123 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek) |
| CB414-60124 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
| CB414-60125 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Thai) |
| CB414-60151 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
| CB414-60152 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
| CB414-60153 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovakian) |
| CB414-60154 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
| CB414-60194 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese/Twi) |
| CB414-60195 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| CB425-60103 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English) |
| CB425-60149 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English)Control Panel Overlay Ki Replacement. |
| RC1-0939-000CN |
Pad - Separation pad assembly for the Tray 1 position and fits in a holder that sits just below the Tray 1 paper pickup roller. |
| RC2-0468-000CN |
Pad - Right lower cushion - Located on the button of the printer - Small black foam rubber rectangle shaped pad. |
| RM1-3738-000CN |
Pad - Tray 1 and 2 separation pad and holder assembly. |
| Q7819-60001 |
PC Board - Formatter (main logic) board - For HP LaserJet M3035/M3027 Series only |
| Q7819-60101 |
PC Board - Formatter (Main Logic) board - For HP LaserJet M3035/M3027 Series only |
| Q7819-61006 |
PC Board - Formatter (Main logic) board - For HP LaserJet M3035/M3027 Series only |
| Q7819-61007 |
PC Board - Formatter (Main logic) board - For HP LaserJet M3035/M3027 Series only |
| Q7819-61009 |
PC Board - Formatter (main logic) board - For HP LaserJet M3035/M3027 Series only |
| RM1-3774-020CN |
PC Board - Engine controller assembly - For 110 VAC to 127 VAC - Engine controller PC board and metal pan - Provides all power supply and motor control functions |
| RM1-3774-030CN |
PC Board - Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 110 VAC to 127 VAC |
| RM1-3775-020CN |
PC Board - Engine controller assembly - 220-240VAC - Engine controller PC board and metal pan - Provides all power supply and motor control functions |
| RM1-3775-030CN |
PC Board - Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 220 VAC to 240 VAC operation |
| RM1-4077-000CN |
PC Board - Engine controller PC board assembly and metal pan - Provides all power supply and motor control functions - For 220 VAC to 240 VAC operation |
| 5851-4012 |
Pickup Assembly - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3 |
| 5851-4013 |
Pickup Assembly - Paper pick-up roller assembly - For tray cassette 2 and 3 - Include separation pad for tray 2 and 3 |
| RM1-3762-000CN |
Pickup Assembly - Kit Paper Pick-up AssemblyPaper pick-up assembly - Includes the pick-up roller, feed roller assembly, drive gears, and separation pad for tray 2 and 3 |
| XD3-2120-122CN |
Pin - Dowel pin - Holds roller/cam pieces on roller dowel |
| RC1-4136-000CN |
Plate - Protective plate - |
| RC2-0623-000CN |
Plate - Left plate fan shield - Holds the left side fan (FM2) |
| RC2-0649-000CN |
Plate - Fuser film drive side plate - Located on the fuser assembly. |
| RC2-0697-000CN |
Plate - Plate face-up shield |
| RM1-3727-000CN |
Plate - Bottom support plate for the roller assembly |
| 8121-0731 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only. |
| 8121-0733 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| 8121-0737 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240VAC in India and South Africa) |
| 8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| 8121-0921 |
Power Cord - Power cord (Black) - 16 AWG, 2.5m (8.2ft) long - Has straight (F) C13 receptacle (for 125 VAC in USA and Canada) |
| 8121-0946 |
Power Cord - Power cord (Black) - 18 AWG, 220VAC, three conductor, 1.9m (6.25ft) long - Has 90 degree receptacle - For United Kingdom, Middle East, Philippines, Singapore, Hong Kong SAR, and Malaysia |
| 8121-0947 |
Power Cord - Power cord (Black) - 3-wire, 1.9m (6.2ft) long - Has 90 degrees (F) C13 receptacle (For 250V in Switzerland) |
| 8121-0949 |
Power Cord - Power cord (Black) - 3-wire, 1.9m (6.2ft) long - Has 90 degrees (F) C13 receptacle (For 250V in Denmark) |
| 8121-0950 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle - For Southern Europe, Western Europe, Eastern Europe, Indonesia, Russia, Baltics, Vietnam, and Korea |
| 8121-0954 |
Power Cord - Power cord (Black) - 3-wire, 1.9m (6.2ft) long - Has 90 degrees (F) C13 receptacle (For 120V in the USA, Canada, and Mexico ) |
| 8121-1004 |
Power Cord - Power cord (Flint Gray) - Three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Israel) |
| 8121-1005 |
Power Cord - Power cord (Black) - 3-wire, 1.9m (6.2ft) long - Has 90 degrees (F) C13 receptacle (For 250V in Israel) |
| 0957-2293 |
Power Supply - Pwra brk uni 24vdc 36w |
| RM1-3758-000CN |
Power Supply - High voltage power supply PC board assembly. |
| CC476A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| XD2-1100-402CN |
Retainer - Retaining ring (E-type) |
| XD2-1200-302CN |
Ring - E-type retainer ring |
| RC2-0593-000CN |
Rod - Fan rod - Metal rod that mounts against fan (FM1) on right side of printer - Used for noise reduction. |
| CB414-67904 |
Roller - ADF feed roller assembly - Mounts in center of the ADF chassis - Includes gear, shaft, and clutch parts. |
| CB414-67918 |
Roller - ADF feed roller assembly - Mounts in center of the ADF chassis - Includes gear, shaft, and clutch partsADF feed roller assembly - Mounts in center of the ADF chassis - Includes gear, shaft, and clutch parts |
| RC1-3994-000CN |
Roller - Face down roller - Small individual feed roller that rides against face down shaft roller - Held by torsion spring - Four used |
| RL1-0568-000CN |
Roller - Tray 1/MP Tray pickup roller - D-shaped replacement pickup roller |
| RL1-0569-000CN |
Roller - Tray 1/MP tray pickup roller - D-shaped replacement pickup roller |
| RL1-1370-000CN |
Roller - Paper pickup roller - Picks up media from the paper input tray. |
| RL1-3167-000CN |
Roller - Cassette paper pick-up roller |
| RM1-1485-000CN |
Roller - Roller assembly - Black plastic housing that holds rollers in front of Tray 2 pickup roller assembly |
| RM1-1497-000CN |
Roller - Delivery roller assembly - Lower face-down output roller assembly - Includes roller and holder Four used |
| RM1-1508-000CN |
Roller - Transfer roller assembly - Long metal shaft with black roller - Includes right side bushing and tension spring |
| RM1-3715-000CN |
Roller - Registration roller assembly |
| RM1-3716-000CN |
Roller - Roller Assembly : Multi-purpose tray pickup roller assembly - Includes pickup roller, roller cam, right and left cams, both round rollers and dowel pin. |
| RM1-3749-000CN |
Roller - Face-down output roller assembly - Black roller shaft with four soft rollers. |
| RM1-3763-000CN |
Roller - Pick up roller assembly -Tray 2/3 - LaserJet P3005 P3015 |
| CB414-67905 |
Scanner - Flatbed scanner assembly for LaserJet M3035MFP/M3027MFP series - Includes flatbed scanner frame and glass without the ADF. |
| CB414-67921 |
Scanner - Flatbed scanner assembly for LaserJet M3035MFP/M3027MFP series - Includes flatbed scanner frame and glass without the ADF |
| CC476-67911 |
Scanner - Flatbed scanner assembly for LaserJet M3035MFP/M3027MFP series - Includes flatbed scanner frame and glass without the ADF |
| XA9-1420-000CN |
Screw - M3 pan head phillips screw with captive flat and split-lock washers - 8mm long |
| XA9-1500-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XA9-1503-000CN |
Screw - M3 truss head (Flanged) phillips screw (Black oxide finish) - 6mm long |
| XA9-1671-000CN |
Screw - Screw - M3 X 8mm long |
| XB2-7300-605CN |
Screw - Machine screw with attached washer - M3, 6mm - Used to hold plastic to metal |
| XB4-7401-005CN |
Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates |
| RM1-3799-000CN |
Sensor - Paper sensor assembly - Paper present sensing |
| RM1-4040-000CN |
Sensor - Top sensor printed circuit board (PCB) assembly (PS-901) - Top of page sensor, detects pick, delivery and stationary |
| RM1-4041-000CN |
Sensor - Multipurpose paper tray sensor - Printed circuit assembly (PCA) - Includes paper sensors (PS3) |
| RM1-4042-000CN |
Sensor - Paper width sensor - Printed circuit board (PCB) assembly. |
| RM1-4065-000CN |
Sensor - Printed circuit board (PCB) sensor assembly |
| WG8-5645-000CN |
Sensor - Flag activated photo-sensor |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| CC476A-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| WG8-5624-000CN |
Shaft - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| CB414-60156 |
Shield - Hard drive metal shield assembly - Is a metal box that holds and protect the hard drive - Screws to the chassis |
| RC2-0498-000CN |
Solenoid - Mount solenoid for HP HP LaserJet M3027 MFP |
| RK2-1490-000CN |
Solenoid - Solenoid (SL1) - For tray 1 - Mounts on the main drive assembly. |
| RK2-1492-000CN |
Solenoid - Solenoid (SL2) - For tray 2 - Mounts on the main drive assembly |
| RC1-4028-000CN |
Spring - Torsion spring - Provides tension for top of page sensor flag |
| RC1-4059-000CN |
Spring - Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Rear cartridge contact spring |
| RC1-4061-000CN |
Spring - Torsion spring - Tiny spring that attaches to small metal U-shaped cartridge grounding contact - Front cartridge contact spring |
| RC1-4067-000CN |
Spring - Leaf spring - Leaf spring that provides electrical connection to left side of toner cartridge |
| RC1-4067-030CN |
Spring - Spring, Leaf |
| RC1-4140-000CN |
Spring - Compression spring - Provides pressure to grounding contact link on left side of cartridge guide - Pushes link arm away when cartridge is removed |
| RC2-0483-000CN |
Spring - Spring compression |
| RC2-0576-000CN |
Spring - Torsion spring - Provides tension to the arm paper. |
| RC2-0665-000CN |
Spring - Torsion spring - Tiny spring that attaches the face down roller. |
| RU5-2385-000CN |
Spring - Compression spring - Provides pressure for Tray 1 seperation pad |
| RU5-2386-000CN |
Spring - Torsion spring - Provides tension for Tray 1 paper sensor flag |
| RU5-2388-000CN |
Spring - Tension spring - Provides tension for white plastic arm on left side of cartridge access door |
| RU5-2401-000CN |
Spring - Compression spring - Provides pressure for the large 201 tooth white gear on right side of printer |
| RU5-2403-000CN |
Spring - Tension spring - Provides tension for cartridge clamp lever that holds lefts side of cartridge in a stable position when inserted |
| RU5-2404-000CN |
Spring - Compression spring - Spring provides pressure to the laser shutter which when pulled back (spring is compressed) enables the laser scanner shutter by pressing up the plastic mechanical link on the underside of the laser/scanner assembly |
| RU5-2405-000CN |
Spring - Compression spring - Provides pressure for E-reader holder |
| RU5-2407-000CN |
Spring - Tension spring - Provides tension for cartridge access door arm |
| RU5-2408-000CN |
Spring - Compression spring - Right side transfer roller spring - Provides tension for transfer roller |
| RU5-2410-020CN |
Spring - Torsion spring - Provides pressure to move protective plate back into cartridge compartment when the cartridge is removed |
| RU5-2920-000CN |
Spring - Compression spring - Goes on the pendulum assembly |
| RU5-2920-020CN |
Spring - Compression spring |
| CB414-60147 |
Stacker Assembly - Stapler/Stacker for LaserJet M3035 MFP |
| CB414-67917 |
Stacker Assembly - Stapler/Stacker accessory for LaserJet M3035MFP printers |
| CB414-67925 |
Stacker Assembly - Stapler assembly (bracket and stapler) |
| RC1-4025-000CN |
Static Dissipater - Static charge eliminator - Comb that mounts above upper delivery roller that dissipates static charge as paper exits printer |
| RC1-4069-000CN |
Static Dissipater - Sheet static charge - Goes on the lower transfer guide assembly - Dissipates static charge from paper. |
| RC1-4070-000CN |
Static Dissipater - Sheet static charge - Dissipates static charge from paper |
| RC2-0585-000CN |
Stop - Left wing feed guide stopper |
| RC2-0702-000CN |
Stop - Right cartridge stopper - Provided a predetermined position for the cartridge. |
| RC2-0707-000CN |
Stop - Left cartridge stopper - Provided a predetermined position for the cartridge |
| RK2-0534-000CN |
Switch - Microswitch - Door open switch - SW501 |
| RM1-3732-000CN |
Tray - 500-sheet input tray - Paper cassette for tray 2. (RM1-3796-000CN is tray# 3) |
| RM1-3796-000CN |
Tray - 500-sheet input tray - Paper cassette for tray 3. (RM1-3732-000CN is tray# 2) |
| Q7817-67901 |
Tray Assembly - Optional 500-sheet paper input tray feeder assembly - Includes the paper feeder base assembly and 500-sheet paper cassette tray 3 - Holds Letter, A4, Legal, A5, B5 (JIS), Executive, and 8.5 x 13 paper sizes. |
| RM1-1490-000CN |
Tray Assembly - MP/Tray 1 support assembly - Hinged support and adjustable paper width guide assembly - Tray 1 cover assembly attaches to this assembly |
| RC2-0652-000CN |
Washer - Plain Washer - Located on the pendulum assembly |
View service parts