| Q7829-67901 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| Q7829-67917 |
ADF - ADF float assembly |
| Q7829-67939 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| Q7829-67944 |
ADF - ADF assembly - Includes rear cover, cable, input tray, front cover, white scan background, mylar holder assembly, left cover, photo interrepter with conector, PCA motor |
| RC1-8034-000CN |
Arm - Sensor arm lock - Detects if cartridge is present sensor (SR9) |
| Q7829-60150 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| Q7829-60159 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| Q7829-60182 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| Q7829-60185 |
Belt - Scanner assembly (whole unit) - Include rod, glass guide, rubber guide, paper sensor, rail and slide sheet assembly |
| RC1-7249-000CN |
Bushing - Support bushing - Axial support for top sensor flag - Two used |
| RC1-7283-000CN |
Bushing - Bushing - Located on the gear plate next to the cam and the 133-tooth gear |
| RC1-7443-000CN |
Bushing - Bushing - Located between the 25-tooth and 35-tooth gears on the tranfer drive side plate |
| 5851-2501 |
Cable - Hard drive power SATA cable - Provides power to the hard drive connects to the mother board |
| 5851-2502 |
Cable - Hard drive SATA cable - Connects the hard drive with the mother board - Transfer all the data from the printer to the hard drive |
| 5851-2503 |
Cable - Cable fax for HP LaserJet M3035 MFP |
| 8120-8911 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Denmark) |
| 8120-8912 |
Cable - Telephone cable (Germany) - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end, Germany phone plug on other end |
| 8120-8913 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Israel) |
| 8120-8914 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Italy) |
| 8120-8915 |
Cable - Telephone cable (four conductor) - RJ-11 (M) to telephone plug/socket connector - 3m (9.8ft) long (Netherlands) |
| 8120-8918 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Sweden) |
| 8120-8921 |
Cable - Telephone cable (five conductor) - RJ-11 (M) to BS-601A (M/F) - 3m (9.8ft) long (for the U.K., New Zealand, and Hong Kong) |
| 8120-8922 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 phone plug connectors (Eastern Europe, Czechoslovakia, Slovenia, and Hungary) |
| 8120-8923 |
Cable - Telephone cable - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (France, Morocco, and Tunisa) |
| 8121-0811 |
Cable - Telephone cable (2-wire) - RJ11 (M) connectors - 3m (10ft) long (USA, Canada, Mexico, Latin America, Greece, Poland, Saudi Arabia, Portugal, and Spain) |
| 8121-0844 |
Cable - Telephone cable with bill tone filter - 3.0m (9.8ft) long (Black) - RJ-11 plug on one end (Switzerland) |
| Q7829-67907 |
Cable - Control board cable - Connects automatic document feeder (ADF) to the scanner |
| Q7829-67946 |
Cable - Replacement - adf scanner cable |
| RK2-1053-000CN |
Cable - Flexible flat cable - 21 pin connector |
| RK2-1055-000CN |
Cable - Flexible flat cable - 23 pin connector |
| Q7829-60101 |
Cage - Formatter board cage assembly - Metal shield and enclosure for the formatter board |
| RC1-7284-020CN |
Cam - Cam - Located between large white 133 tooth gear and the bushing on the gear cover |
| RC1-8038-000CN |
Cam - Cam, pad return, lower |
| RC1-8329-000CN |
Cam - Shutter cam - Located on the lower scanner duct |
| RC1-8332-000CN |
Cam - Slide cam - Located on the lower scanner duct |
| RC1-7141-000CN |
Cap - Cap, paper feed guide |
| U2014E |
Care Pack - HP Network Install high-end LaserJet Multifunction printer Service |
| UV249E |
Care Pack - HP 3 year Next business day response onsite LaserJet M5039 MFP Hardware Support |
| UV250E |
Care Pack - HP 1 year Next business day response onsite LaserJet M5039 MFP Hardware Support |
| UV251PE |
Care Pack - HP 1 year Post-Warranty Next business day response onsite LaserJet M5039MFP Hardware Support |
| UV252E |
Care Pack - HP 4 year Next business day response onsite LaserJet M5039 MFP Hardware Support |
| UV253E |
Care Pack - HP 5 year Next business day response onsite LaserJet M5039 MFP Hardware Support |
| Q7570-67901 |
Cartridge - Black toner cartridge with Smart Printing Technology - Prints approximately 15,000 pages per cartridge |
| Q7570-67902 |
Cartridge - Black print toner cartridge - With Smart Printing Technology - Prints approximately 15,000 standard pages |
| XD9-0233-000CN |
Clip - Retaining E-ring |
| RK2-1281-000CN |
Clutch - Electromagnetic clutch (CL2) |
| RM1-2995-010CN |
Connector - Connecting PCA assembly - Includes IS connecting PCA assembly, formatter guide plate, formatter guide cap plate, flexible flat cable guide, DINN board support, video interface PCA assembly, and screws |
| VS1-7258-007CN |
Connector - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
| Q7829-60102 |
Control Panel - Contorl panel assembly - Includes a touchscreen graphical display, job control buttons, a numeric keypad, and three light emitting diode (LED) status lights - Does not include overlay |
| Q7829-60189 |
Control Panel - Contorl panel assembly - Includes a touchscreen graphical display, job control buttons, a numeric keypad, and three light emitting diode (LED) status lights - Does not include overlayContorl panel assembly - Includes a touchscreen graphical display, job c |
| Q7829-60144 |
Cover - Plastic screw covers with an adhesive back - Covers screw heads that secure the plastic scanner top cover - Ten used |
| Q7829-60145 |
Cover - Scanner controller board (SCB) main cover - Protects the scanner board assembly - Located on the top back side of the scanner assembly |
| Q7829-60152 |
Cover - Top cover assembly - Covers the scanner glass assembly - Does not include lift-up door or any other attaching parts |
| Q7829-60153 |
Cover - Right side scanner cover - Located on the right side portion of the top cover |
| Q7829-60154 |
Cover - Bottom cover - Protects the bottom part of the scanner assembly - where the scanner sits on |
| Q7829-67904 |
Cover - ADF rear end cover - Protects the rear side of the ADF - Located on top of the scanner controler bord cover |
| Q7829-67905 |
Cover - ADF front cover - Located on the fornt part of the ADF unit on top of the control panel when the ADF is close |
| Q7829-67906 |
Cover - ADF left cover - Located under the paper jam cover on the left side of the printer |
| Q7829-67910 |
Cover - ADF jam access cover - Located on the left top side of the printer - To remove paper jam from the ADF |
| Q7829-67919 |
Cover - Pick-up roller cover - Plastic cover that protects the paper pick-up roller and separation pad located on the ADF |
| Q7829-67920 |
Cover - Pick-up roller cover - Plastic cover that protects the paper pick-up roller and separation pad located on the ADF |
| RC1-7019-000CN |
Cover - Right upper gear cover - Located next to the right lower cartridge giude |
| RC1-7265-000CN |
Cover - Contact holder cover - Fuser bias contact cover. |
| RC1-8164-000CN |
Cover - Rear gear cover - Protects the rear part of the gear plate |
| RC1-8220-000CN |
Cover - Front cover - Face down paper delivery cover |
| RC1-8221-010CN |
Cover - Front Cover - Plastic cover on top of the paper cassette tray |
| RC1-8222-000CN |
Cover - Rear Cover - Covers the back part of the printer - Located next to the formatter cover |
| RC1-8223-000CN |
Cover - Formatter board cover - Located on the back right side of the printer next to the rear cover |
| RC1-8225-000CN |
Cover - Left rear cover - Rectangle shaped plastic cover located on the left rear side of the printer |
| RC1-8226-000CN |
Cover - Right rear cover - Plastic cover located on the right rear side of the printer next to the right door assembly |
| RC1-8227-000CN |
Cover - Left upper cover - Small rectangular cover - Located on top of the left lower cover |
| RC1-8228-000CN |
Cover - Left lower cover assembly |
| RC1-8231-000CN |
Cover - Face down side cover - Located between the front cover and the inner front cover |
| RC1-8233-000CN |
Cover - Top cover - Attached to the face down top cover |
| RC1-8235-000CN |
Cover - Duplexer blank cover - Located next to the left upper cover |
| RC1-8236-000CN |
Cover - Right grip cover - Rectangle shaped cover with two handles to pull the right door |
| RM1-2987-020CN |
Delivery - Paper delivery assembly |
| Q7829-67918 |
Diverter - ADF diverter assembly - Diverts paper to duplexer assembly, face up tray or face down delivery assembly |
| Q7829-67922 |
Door - Stapler/stacker left door |
| RC1-9719-000CN |
Door - Clean out access door - Left side door that provides access to paper jams |
| RM1-2984-030CN |
Door - Cartridge door assembly - Provides access to the print cartridges |
| RM1-2990-000CN |
Door - Left door assembly - Includes flapper pad, left door, facedown guide, left door handle, compression spring, and screw |
| RM1-2991-000CN |
Door - Right door assembly - For the print engine - Located below the cartridge access door |
| 5851-0673 |
Drive Assembly - Kit-Hard Disk Drive replacement |
| 5851-3833 |
Drive Assembly - 40GB SATA Hard drive - 5,400 RPM, 2.5 inch form factor, 9.5mm height Hard drive kit. For PATA (Parallel ATA) connector order Q7829-67935. |
| RM1-2962-000CN |
Drive Assembly - Delivery drive assembly |
| RM1-2963-000CN |
Drive Assembly - Fuser drive assembly - Includes the two support plates, drive gears, and motor (M2) |
| RM1-2963-040CN |
Drive Assembly - Fuser/Fixing drive assembly - Includes the two support plates, drive gears, and motor (M2) |
| RM1-2972-000CN |
Drive Assembly - Lower drive assembly - Includes lower drive plate, 43/26 tooth gear, 14/14 tooth gear, and 29 tooth gear |
| RC1-8328-000CN |
Duct - Duct, scanner, lower |
| Q7549-67901 |
Duplexer - LaserJet, printer, and copier series Duplexer assembly, Auto Duplex Unit for double sided printing. |
| RK2-1284-000CN |
Fan - Rear cooling fan - 2-wire, 92mm x 92mm x 25mm, 12VDC, 0.30A (black) |
| RK2-1285-000CN |
Fan - Front cooling fan - Mounts on the front part of the printer on top of the tray 3 - Does not include housing |
| RM1-3009-000CN |
Feeder - Paper feed assembly - Include plate, bushings, covers, springs, static charge eliminator, rollers, transfer insulating sheet,and guide |
| RC1-7261-000CN |
Flag - Paper sensor flag - Leading edge paper sensor flag |
| Q7829-67909 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| Q7829-67943 |
Foam - ADF reflector foam - White plastic sheet with foam that reflects the light wile scanningADF reflector foam - White plastic sheet with foam that reflects the light wile scanning |
| Q7829-67931 |
Fuser Assembly - Fusing assembly - For 110 VAC - Bonds toner to paper with heat |
| Q7829-67934 |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| Q7829-67941 |
Fuser Assembly - Fuser Assembly - For 220 VAC - Bonds toner to paper with heat |
| RM1-3007-040CN |
Fuser Assembly - Fusing assembly - For 110 VAC - Bonds toner to paper with heat |
| RU5-0537-000CN |
Gear - 25-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0538-000CN |
Gear - 35-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0539-000CN |
Gear - 33-tooth gear for HP LaserJet Mxxxx mfp |
| RU5-0546-020CN |
Gear - 133-tooth gear - Big gear that is located on the gear plate |
| RU5-0547-000CN |
Gear - Gear - 73-tooth gear - Located on the gear plate |
| RU5-0548-000CN |
Gear - Gear - 52/96 tooth gear - Have 52-tooth on the inside and 96-tooth on the outside - Located on the gear plate |
| RU5-0549-000CN |
Gear - Gear - 40/99 tooth gear - Have 40-tooth on the inside and 99-tooth on the outside - Located on the gear plate |
| RU5-0550-000CN |
Gear - Gear - 43-tooth - Located on the gear plate |
| RU5-0551-000CN |
Gear - Gear - 26-tooth gear - Located on the gear plate - Snaps in to the 43-tooth gear |
| RU5-0553-000CN |
Gear - Gear - 15-tooth gear |
| RU5-0564-000CN |
Gear - 14-tooth gear for HP LaserJet Mxxxx mfp |
| RM1-2460-020CN |
Gear Assembly - Paper pick-up roller gear asembly |
| Q7829-60143 |
Glass Assembly - Scanner glass assembly - Glass plate on which the documents are placed to be scanned - Mounts in the scanner bezel |
| RC1-7021-000CN |
Ground - Grounding plate - Provides grounding for the photo interrupter |
| Q7829-60157 |
Guide - Scanner glass guide - Rectangle shaped guide that determines the correct position of the scanner glass |
| Q7829-60158 |
Guide - Scanner glass guide - Rectangle shaped guide that determines the correct position of the scanner glass |
| Q7829-60162 |
Guide - Rubber guide - For the scanner glass |
| Q7829-90969 |
Guide - Formatter instruction guide |
| RC1-7121-000CN |
Guide - Cartridge guide - Front left side toner cartridge guide |
| RC1-7286-000CN |
Guide - Cartridge guide - Lower right side toner cartridge guide |
| RC1-7287-000CN |
Guide - Cartridge guide - Upper right side toner cartridge guide |
| RC1-8027-000CN |
Guide - Front duplexer guide - Guide/support for duplexer assembly |
| RC1-8048-000CN |
Guide - Rear guide for the duplexer assembly |
| Q7829-67916 |
Hinge - ADF hinge - For the top cover (document lid) on the scanner (two are required) |
| Q7829-67945 |
Hinge - ADF hinge - For the top cover (document lid) on the scanner (two are required) |
| RC1-7241-000CN |
Holder - Contact holder - Holds fuser bias contacts. |
| RC1-7268-000CN |
Holder - Sensor holder - Media leading edge sensor holder |
| RC1-8026-000CN |
Holder - Spring holder - Hold the compression spring located on the fuser bias |
| RC1-8035-000CN |
Holder - Tray holder - Right front paper cassette holder |
| RC1-8036-000CN |
Holder - Tray holder - Left front paper cassette holder |
| RM1-2999-000CN |
Holder - Tag holder assembly - Includes connector holder tag, holder plate, compression spring, and memory contact cable |
| RM1-2555-020CN |
Laser Scanner - Laser/Scanner assembly - Mounts on the support structue in the print engine frame assembly RM1-2557 |
| RC1-7285-000CN |
Lever - Coupling lever - Lever arm that couples the drive gear to the toner cartridge. |
| RC1-7451-000CN |
Lever - Shutter lever - Connects to laser shutter |
| RC1-8032-000CN |
Lever - Lever, fixing shutter |
| RC1-8075-000CN |
Lever - Lever, drive release |
| RC1-8330-000CN |
Lever - Pushing lever - Located on the lower scanner duct |
| RM1-2969-000CN |
Lifter - Lifter drive assembly - Includes photosensor, grounding plate, push switch, front gear box, rear gear box, gears, springs, E-ring, lifter plate, input gear shaft, cassette size cable, and screws |
| RC1-7289-000CN |
Link - Tag link - This is an arm extension for a mechanical movement - It allows the printer to read the toner cartridge supplies status |
| Q7829-67937 |
Lock - Scanner lock for HP CE966A |
| RC1-8039-000CN |
Lock - Front pressure release lock |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7832-67901 |
Maintenance Kit - Maintenance kit (110 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 110 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7833-67901 |
Maintenance Kit - Maintenance kit (220 VAC) - Includes separation pad, pick-up rollers, pick-up and feed rollers, transfer roller, fuser for 220 VAC operation, gloves, tool (hook), and an instructions guide |
| Q7842-67902 |
Maintenance Kit - ADF MAINTENANCE KIT ADF maintenance kit - Includes the ADF paper pickup roller assembly and the separation pad assembly |
| Q7829-90908 |
Manual - Q7829-90908 |
| Q7713-67951 |
Memory - HP 32MB 100 Pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7714-67951 |
Memory - 48MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7715-67951 |
Memory - 64MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7718-67951 |
Memory - 128MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7719-67951 |
Memory - 256MB 100-pin DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7720-67951 |
Memory - 512MB, 100-pin, DDR DIMM - Used to add flash memory-based accessory fonts, macros, and patterns |
| Q7829-60149 |
Motor - Transmission motor assembly - Located on the transmission drive assembly - Makes the gear move the timing belt |
| RM1-2516-000CN |
Motor - Main motor - Drives gears in main drive assembly (motor unit). |
| RM1-2538-000CN |
Motor - Fusing assembly drive motor |
| Q7829-60166 |
Optical Unit - Scanner optical carriage assembly - Includes the optical scanner and light mounted on a carriage assembly - Passes under the document during the flatbed scanning operation - Mounts inside the flatbed scanner assembly |
| Q7829-60110 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (English) |
| Q7829-60111 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (French) |
| Q7829-60112 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Italian) |
| Q7829-60113 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Dutch) |
| Q7829-60114 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Spanish) |
| Q7829-60115 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (for use in the Netherlands) |
| Q7829-60116 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Portuguese) |
| Q7829-60117 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Norwegian) |
| Q7829-60118 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Swedish) |
| Q7829-60119 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Finland) |
| Q7829-60120 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Danish) |
| Q7829-60121 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Polish) |
| Q7829-60122 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Russian) |
| Q7829-60123 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Czech) |
| Q7829-60124 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hungarian) |
| Q7829-60125 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese/Twi) |
| Q7829-60126 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| Q7829-60127 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Korean) |
| Q7829-60128 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Japanese) |
| Q7829-60129 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Turkish) |
| Q7829-60130 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Hebrew) |
| Q7829-60131 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Greek) |
| Q7829-60132 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Arabic) |
| Q7829-60133 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Thai) |
| Q7829-60134 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Romanian) |
| Q7829-60135 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovakian) |
| Q7829-60136 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Slovenian) |
| Q7829-60137 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Croatian) |
| Q7829-60176 |
Overlay - Control panel overlay - Snaps on top of the control panel assembly (Chinese) |
| Q7829-67927 |
Pad - Separation pad for multipurpose tray/tray 1 assembly |
| Q3701-60020 |
PC Board - Fax printed circuit assembly (PCA) - Accessed from the rear of the unit - Located on the formatter boardHP LaserJet analog fax accessory 300 |
| Q3701-60021 |
PC Board - Modem PCA - HP LaserJet analog fax accessory 300 |
| Q7565-67910 |
PC Board - Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7565-67913 |
PC Board - Formatter (main logic) PC board - For HP LaserJet M5025/M5035 series only |
| Q7829-40001 |
PC Board - Fax card cradle (Black) - Holds the fax card in a specific position on the mother board |
| Q7829-60165 |
PC Board - Scanner controller board assembly (SCB) (main baord) - Provides timing and control for the flatbed scanner |
| Q7829-60183 |
PC Board - Scanner controller board assembly (SCB) (main baord) - Provides timing and control for the flatbed scanner |
| Q7829-67903 |
PC Board - PCA motor assembly ADF |
| Q7829-67933 |
PC Board - Formatter (Main Logic) board - For LaserJet M5025/M5035 |
| Q7829-67942 |
PC Board - PCA motor assembly ADF |
| RM1-2957-020CN |
PC Board - High voltage power supply PC board - 110-127VAC input voltage |
| RM1-3459-030CN |
PC Board - DC controller board - DC Controller for LaserJet M5025/M5035 series |
| RM1-3641-030CN |
PC Board - Paper feed PCA assembly - Located on the rear part of the high capacity input (HCI) feeder main body |
| RM1-2976-000CN |
Pickup Assembly - Upper cassette paper pickup assembly |
| RM1-2977-000CN |
Pickup Assembly - Lower cassette paper pickup assembly |
| RC1-7129-000CN |
Plate - Transfer drive side plate - Plate that holds the 33-tooth gear, 35-tooth gear, 25-tooth gear, and the bushing |
| RC1-7264-000CN |
Plate - Cross member auxiliary plate |
| RC1-8069-000CN |
Plate - Plate, scanner duct |
| RL1-0951-000CN |
Plate - Gear support plate - Holds 133-tooth gear, 73-tooth gear, 96/52-tooth gear, 99/40-tooth gear, 43-tooth gear, and 26-tooth gear |
| 8121-0731 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (75in) long - Has straight (F) C13 receptacle (For 220V in Europe)Limited supply only. |
| 8121-0738 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| 8121-0739 |
Power Cord - Power cord (Black) - 18 AWG, three conductor, 1.9m (6.25ft) long - Has straight (F) C13 receptacle (For 240V in Singapore, Hong Kong and the U.K.) |
| 8121-0740 |
Power Cord - Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico, and Taiwan) |
| RM1-2958-020CN |
Power Supply - High voltage power supply PCA assembly - For 220/240 VAC input voltage |
| RM1-2994-040CN |
Power Supply - Power supply PC board assembly - 110–127 VAC input voltage |
| RM1-3006-040CN |
Power Supply - Power supply PC board assembly - For 220/240 VAC input voltage |
| Q7829-67932 |
Pressure Assembly - Fuser pressure release assembly |
| Q7829-60151 |
Pulley - Pulley assembly - For transmission timing belt |
| Q7829-60164 |
Rail - Rail and slide sheet assembly |
| RM1-2970-000CN |
Rail - Cassette support rail assembly - Left side tray 2 support rail assembly |
| RM1-2971-000CN |
Rail - Cassette support rail assembly - Right side tray 2 support rail assembly |
| CE966A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RC1-8358-000CN |
Ring - E-ring type for HP LaserJet Mxxxx mfp |
| Q7829-60160 |
Rod - Scanner slider rod - Scanner module moves along this rod |
| Q7829-67924 |
Roller - Pickup roller high capacity input (HCI) - Attached to the pickup arm - Presses down the paper stack surface to feed the paper one sheet at a time (white) |
| Q7829-67925 |
Roller - Feed roller high capacity input (HCI) - Transmit the paper from the cassette and feeds it to the device entrance (blue) |
| Q7829-67926 |
Roller - Paper pickup roller - MP/Tray 1 paper pickup roller |
| Q7829-67928 |
Roller - Transfer roller assembly - Long metal shaft with Black roller and drive gear - Transfers static charge to the media being printed on |
| Q7829-67929 |
Roller - Feed/separation roller - Has a blue gear on one end and blue release tab on the other - For tray 2 or tray 3 |
| Q7829-67930 |
Roller - Pickup roller assembly - Picks paper from paper input tray - For tray 2 or tray 3 |
| Q7829-67940 |
Roller - Paper feed roller assembly - Includes four feed serparation rollers |
| RM1-2983-000CN |
Roller - Separation block assembly - Includes separation roller assembly, springs, E-rings, separation block shaft, separation block roller, separation block holder, separation roller base, and separation roller block cover |
| RM1-3001-000CN |
Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, transfer upper guide, left and right registration side plate, registration roller shaft, and upper transfer sheet guide |
| 0515-4318 |
Screw - Stabilizing screw for the 2,000-sheet feeder - Mounts on right side of the 2,000-sheet paper feeder assembly (two used) |
| 0515-4679 |
Screw - M3 pan-head phillips screw with washer - 6mm long |
| Q7829-60148 |
Sensor - Scanner lid sensor assembly |
| Q7829-60163 |
Sensor - Paper sensor - Paper present sensing |
| Q7829-67913 |
Sensor - Adf flag sensor ls |
| Q7829-67914 |
Sensor - ADF photo interrupter sensor with connector |
| RC1-7144-000CN |
Sensor - Loop sensor flag - Tracks the paper tension during its movement in the paper path of the printer |
| RM1-2968-000CN |
Sensor - Back end sensor assembly - Includes block sensor, grounding spring, and push switch |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5696-000CN |
Sensor - Photo-interrupter sensor assembly (Does not include the sensor flag) |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| Q7829-67911 |
Separator - Separation floor assembly for the ADF - Includes right and left separation mylar, and separation spring |
| CE966A-Manual_Color |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RC1-7163-000CN |
Shutter - Fusing shutter - Fuser shutter door - Closes when cartridge access door is opened |
| RC1-7436-000CN |
Shutter - Shaft, fixing shutter |
| RC1-8331-000CN |
Spacer - Slide spacer - Located between the pushing lever and the slide cam on the lower scanner duct |
| RC1-8333-000CN |
Spacer - Spacer ring - Located on the lower scanner duct |
| RC1-7123-000CN |
Spring - Torsion spring - Located on the left cartrige guide - Spring that is used for the movement of the left cartridge guide |
| RC1-7124-000CN |
Spring - Grounding spring - Used inside the print engine |
| RC1-7125-000CN |
Spring - Torsion spring - Provides torsion to the paddle of the left cartridge guide |
| RC1-7126-020CN |
Spring - Compression spring - Used in the side plate inside the print engine |
| RC1-7127-000CN |
Spring - Compression spring - Fuser bias contact for fuser grounding |
| RC1-7127-010CN |
Spring - Spring Compression |
| RC1-7145-000CN |
Spring - Torsion spring - Provides radial tension for loop sensor flag located on the high voltage power supply |
| RC1-8052-000CN |
Spring - Grounding spring - Located on the rear guide assembly |
| RC1-8078-000CN |
Spring - Torsion spring - Located on the fuser sensor link |
| RC1-8334-000CN |
Spring - Torsion spring - Located on the shutter cam - Provides torsion to the slide cam |
| RC1-8335-000CN |
Spring - Torsion spring - Located on the lower scanner duct |
| RU5-2548-000CN |
Spring - Tension spring - Provides tension for MP/Tray 1 separation pad assembly |
| RU5-2553-000CN |
Spring - Compression spring - Provides pressure for MP/Tray 1 separation pad assembly |
| RU5-2575-000CN |
Spring - Tension spring - Provides tension to the paddle - Located on left cartridge guide |
| RU5-2587-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2588-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2589-000CN |
Spring - Compression spring - Electrical contact spring for toner cartridge |
| RU5-2590-000CN |
Spring - Compression spring - Located next to the arm lock |
| RU5-2591-000CN |
Spring - Tension spring - Provides tension for fuser release lever |
| RU5-2596-000CN |
Spring - Torsion spring - Provides tension for top sensor flag |
| RU5-2630-000CN |
Spring - Compression spring - Provides pressure for gear pack at lever arm that couples the drive gear to the toner cartridge |
| RU5-2631-000CN |
Spring - Compression spring - Located on the gear plate at the end of the 43-tooth gear |
| RU5-2632-000CN |
Spring - Tension spring - Provides tension for lever arm that couples the drive gear to the toner cartridge |
| RU5-2633-000CN |
Spring - Compression spring - Provides pressure for tag link |
| RU5-2651-000CN |
Spring - Tension spring - Provides tension for shutter lever |
| RU5-2660-000CN |
Spring - Tension spring - Provides tension to the fuser release drive link - Located next to the cartridge door stopper guide |
| RU5-2663-000CN |
Spring - Tension spring - Provides tension to the fuser shutter lever |
| RU5-2683-000CN |
Spring - Compression spring - Located on the fuser sensing link |
| Q7604-67901 |
Stacker Assembly - 500 sheet stapler stacker paper assembly |
| RC1-3090-000CN |
Stop - Bushing stop - For the fuser lever - Located on the inside upper front part of the printer - Two used |
| RC1-7288-000CN |
Stop - Link stopper - Stop for lever arm that couples the drive gear to the toner cartridge |
| RC1-8021-000CN |
Stop - Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
| RC1-8022-000CN |
Stop - Cartridge door stopper - Provided a predetermined position for the cartridge door when is open |
| RM1-3471-000CN |
Switch - Door switch - Indicates when toner cartridge door is open |
| RM1-3474-000CN |
Switch - Door switch - Indicates when fuser door is open |
| Q7829-67923 |
Tray - 500-sheet output bin - For the stapler/stacker unit |
| RC1-8137-000CN |
Tray - Tray - Goes between the face down delivery cover and the top cover |
| RM1-2978-000CN |
Tray - 250-sheet upper paper cassette tray 2 assembly |
| RM1-2979-000CN |
Tray - 250-sheet lower paper cassette tray 3 assembly |
| Q7829-67912 |
Tray Assembly - ADF input paper tray assembly - Includes the adjustable width |
Techical Help
View service parts