| RC1-0003-000CN |
Arm - Toner cartridge arm - Mechanical link between main drive assembly and toner cartridge release mechanism |
| RC1-0714-000CN |
Arm - Front door stop arm - Thin plastic arm between the front door and the lower frame - Provides a positive stop when the front door is opened |
| RC1-0206-000CN |
Bushing - Bushing - On right side of paper pickup drive assembly |
| RC1-0264-000CN |
Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft. |
| RU5-1408-000CN |
Bushing - Bushing - Feed roller shaft bushing - Bushing on right side of printer that supports the feed roller shaft |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 5063-1257 |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| RG1-4213-000CN |
Cable - Top Cover cable - From top cover microswitch (SW101) to DC Controller board |
| RG1-4221-000CN |
Cable - Tray 2 paper pickup sensor cable assembly - Connects to sensors PS101 and PS107 |
| RG1-4231-020CN |
Cable - Fuser cable - Main fuser cable for LaserJet 4300 series |
| RG1-4239-000CN |
Cable - Interface cable assembly - Connects between the 6-pin interface connector and the feeder control board |
| RG1-4240-000CN |
Cable - Media size sensor cable assembly - Connects between the paper size sensor assembly and the feeder control board |
| RG1-4241-000CN |
Cable - Front door sensor cable - Connects between the sensor in the feeder lifter drive assembly and the feeder control board |
| RG1-4250-020CN |
Cable - Sensor cable assembly - For 500 sheet feeder assembly |
| RG5-6815-000CN |
Cable - AC cable - Low voltage power supply (LVPS) to fuser power supply cable |
| RG5-6826-040CN |
Cable - DC Controller to fuser safety circuit, high voltage power supply (HVPS), electrostatic transfer belt (ETB) |
| RM1-1189-000CN |
Cable - Top bin full sensor cable |
| RM1-1190-000CN |
Cable - Control panel cable |
| RM1-1191-000CN |
Cable - Memory cable - From DC Controller board to the toner cartridge wireless memory contact tag |
| RM1-1192-000CN |
Cable - Power cable for Tray 3 paper feeder - Black connector with 42mm six wire cable to white connector |
| RM1-1193-000CN |
Cable - Envelope feeder cable - From DC Controller board to envelope feeder connector - Includes envelope feeder connector |
| Q1338-67901 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 12,000 pages |
| Q1338-67901 |
Cartridge - Black Toner Cartridge - With 'Micro-Fine' toner - Prints approximately 12,000 pages |
| Q1339A |
Cartridge - HP Monochrome LaserJet 4300 Print Cartridge |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| XD9-0234-000CN |
Clip - E-Type retainer ring |
| RK2-0349-000CN |
Clutch - Paper feed assembly clutch (CL101) - Electro mechanical clutch that connects to the white 30-tooth gear |
| RM1-0042-000CN |
Connector - Accessory cable/connector - Connector for stacker and stacker/stapler accessory at top right rear of printer |
| RM1-1236-000CN |
Connector - Cable and connector on top right rear of 500 sheet feeder assembly |
| RM1-1237-000CN |
Connector - Cable and connector on bottom right rear of 500 sheet feeder assembly |
| VS1-7500-006CN |
Connector - Connector (6-point) |
| RM1-1195-000CN |
Control Panel - Control panel assembly |
| RC1-0019-000CN |
Cover - Inner right front cover |
| RC1-0287-030CN |
Cover - Left side cover panel |
| RC1-0288-000CN |
Cover - Formatter board cover |
| RC1-0289-000CN |
Cover - Top rear cover of printer - Removes for Stapler/Stacker installation |
| RC1-0290-000CN |
Cover - Lower rear cover - Covers rear of standard 500 sheet tray |
| RC1-0291-000CN |
Cover - Duplexer slot cover - Removable lower rear cover for Duplexer attachment slot |
| RC1-0320-000CN |
Cover - Envelope cover - Plastic piece above Tray 1 pickup roller |
| RC1-0487-020CN |
Cover - Left side cover for 500 sheet paper feeder assembly |
| RC1-0488-020CN |
Cover - Right side cover for 500 sheet paper feeder assembly |
| RC1-0500-020CN |
Cover - Cover plate - Plastic cover on right front corner of 500 sheet feeder tray - Covers removable tray number designator plate. Part approaching End of Life, please contact HP for availability |
| RC1-0661-000CN |
Cover - Right side cover assembly - For the 1,500 sheet paper feeder assembly |
| RC1-0662-000CN |
Cover - Left side cover assembly - For the 1,500 sheet paper feeder assembly |
| RC1-0663-000CN |
Cover - Rear cover assembly - Box type cover for the rear of the 1,500 sheet paper feeder assembly |
| RM1-0027-020CN |
Cover - Rear output tray assembly - Includes upper rear paper output tray and cover |
| RM1-0046-020CN |
Cover - Right side cover assembly |
| RM1-0049-030CN |
Cover - Top cover assembly - Top paper output tray and top of printer |
| RM1-0050-050CN |
Cover - Front cover - Drop down Tray 1 |
| RM1-0114-030CN |
Cover - Cartridge access door cover for LaserJet 4250/4350 family |
| RM1-0273-070CN |
Cover - Front cover (or door) - Provides access to load paper in the 1,500 sheet paper feeder assembly |
| RM1-0001-040CN |
Drive Assembly - Main drive assembly - Main gear assembly on right side of printer |
| RM1-0056-070CN |
Drive Assembly - Paper pickup drive assembly - Gear assembly on right front side of 500 sheet paper feeder assembly |
| RM1-0283-080CN |
Drive Assembly - Paper pickup drive assembly - Includes the drive gears and solenoid mounted on a bracket assembly |
| RM1-0287-040CN |
Drive Assembly - Lifter driver assembly - Includes the three drive gears, swing arm, tension spring and door open sensor |
| Q2439-69003 |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| Q2439B |
Duplexer - Automatic duplexer assembly - For LaserJet 4200/4250 and 4300/4350 series printers |
| RK2-0278-000CN |
Fan - Cooling fan - Located on left side of printer (FN101) |
| RK2-0280-000CN |
Fan - Cooling fan (FN105) - Located on right side of printer - Provides air to the print cartridge area |
| 5851-4076 |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| Q2438B |
Feeder - Envelope feeder assembly - Holds up to 75 envelopes - Mounts in the tray 1 slot on the front of the printer - Includes the envelope tray and multi-lingual installation instructions |
| RC1-0060-050CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0061-000CN |
Feeder - Paper feed assembly - Includes tray 1 paper feed sensor flag, torsion spring, and paper feed roller assembly |
| RC1-0161-000CN |
Flag - Paper size sensing flag - White plastic arm used as mechanical link to tray size sensor PC Board - Three used per sensing assembly |
| RC1-0209-020CN |
Flag - Paper sensor flag for Tray 2 paper pickup assembly |
| Q2431-69018 |
Fuser Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation |
| Q2431-69019 |
Fuser Assembly - Fuser assembly - For LaserJet 4300 series - For 220 to 240 VAC operation - Bonds toner to paper with heat |
| Q2437-69007 |
Fuser Assembly - LaserJet 4300 maintenance kit - For 220 VAC operation - Includes 220 VAC fusing assembly, separation roller, transfer roller, feed roller for tray 1, two feed rollers for 500-sheet tray, one feed roller for 1500-sheet tray and installation instructions |
| RM1-0101-300CN |
Fuser Assembly - Fuser assembly for LaserJet 4300 series - Bonds toner to paper with heat - For 100 to 127VAC operation |
| RM1-0102-300CN |
Fuser Assembly - Fuser assembly - For LaserJet 4300 series - For 220 to 240 VAC operation - Bonds toner to paper with heat |
| RU5-0045-020CN |
Gear - 18 tooth gear - Located on right side of printer in the Tray 2 paper pickup assembly |
| RU5-0045-030CN |
Gear - 18-tooth gear - Located on right side of printer in the tray 2 paper pickup assembly Part. |
| RU5-0050-000CN |
Gear - 30 tooth gear - Black plastic gear that attaches to paper feed assembly clutch |
| RU5-0088-000CN |
Gear - 18 tooth gear - Located on right side of printer in the 500 sheet tray paper pickup assembly |
| RM1-0002-030CN |
Gear Assembly - Duplexing pendulum assembly - Gear assembly that transfers power from main motor to run duplexing capability |
| RM1-0286-020CN |
Gear Assembly - Paper level sensor gear assembly |
| RC1-0153-030CN |
Guide - Right side Tray 2 paper cassette guide |
| RC1-0244-000CN |
Guide - Support guide - Supports right rear side of power supply board |
| RC1-0269-020CN |
Guide - DC Controller flat cable guide |
| RC1-0270-020CN |
Guide - DC Controller board cable guide |
| RC1-0273-000CN |
Guide - Paper feed belt guide for left side |
| RC1-0274-020CN |
Guide - Paper feed belt guide for right side |
| RC1-0340-020CN |
Guide - Guide for scanner cable 1 |
| RC1-0385-000CN |
Guide - Guide for scanner cable 2 |
| RC1-0386-000CN |
Guide - Connecting cable guide - Routes and protects all cables running from top portion of printer to the DC controller board |
| RC1-2411-000CN |
Guide - Alignment guide rib - Duplexer skew countermeasure |
| J6054B |
Hard Drive - 10GB minimum, 20GB maximum EIO hard disk - Can be installed in printers with EIO slots - Provides mass storate capability for downloading fonts and macros - May also hold print jobs. |
| RC1-0208-030CN |
Holder - Paper sensor flag holder |
| RC1-0211-000CN |
Holder - Paper pickup arm - Pickup and feed roller holder for Tray 2 paper pickup assembly |
| RC1-0212-000CN |
Holder - Paper pickup arm holder - Holder for pickup roller shaft |
| RC1-0342-020CN |
Holder - Thermistor holder - Plastic inside half of thermistor holder |
| Q2431-67908 |
Kit - LaserJet 4300 series name plate kit - Includes all model labels for LaserJet 4300 series and one HP jewel label used on drop down Tray 1 |
| RM1-0113-000CN |
Laser Scanner - Laser/scanner assembly |
| RM1-0033-040CN |
Lifter - Tray 2 lifter drive assembly - Provides lift support for paper tray |
| RM1-0208-000CN |
Lifter - Tray lifter drive assembly - Lifts paper tray as paper is used in 500 sheet tray |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2429A |
Maintenance Kit - LaserJet 4200 maintenance kit - (120V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| Q2430A |
Maintenance Kit - LaserJet 4200 maintenance kit - (220V) - Includes fusing assembly, separation roller, transfer roller, feed roller for Tray 1, two feed rollers for 500 sheet tray, one feed roller for 1500 sheet tray and installation instructions |
| C4286A |
Memory - 2MB flash DIMM memory - Font storage device |
| C4287A |
Memory - 4MB flash DIMM memory - Font storage device |
| C4292A |
Memory - 8MB Traditional Chinese MROM DIMM - For LaserJet printers |
| C4293A |
Memory - 8MB simplified Chinese MROM DIMM - For LaserJet printers |
| C7842AX |
Memory - 8MB, 100MHz SDRAM DIMM memory module |
| C7843A |
Memory - 16MB, 100-pin SDRAM DIMM memory module |
| C9680A |
Memory - 64MB, 100MHz SDRAM DIMM memory module |
| D4838A |
Memory - Font DIMM - Korean Font memory DIMM |
| Q1887A |
Memory - 64MB, 100-pin SDRAM DIMM memory module |
| Q7707AX |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7709-67951 |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| Q7709AX |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| Q7712AX |
Memory - 256MB, 168-pin SDRAM DIMM memory module |
| RH7-1570-000CN |
Motor - Main motor - Motor on front right side of printer - M101 |
| RH7-1576-020CN |
Motor - Toner cartridge motor - Motor M102 |
| Q2431-40004 |
Overlay - Control Panel Overlay - English |
| Q2431-40009 |
Overlay - Control Panel Overlay (Spanish) |
| RL1-0007-000CN |
Pad - Tray 1 paper separation pad |
| C4179B |
Paper - Soft gloss Color LaserJet paper - A4 size (21.0cm x 29.7cm) - 200 sheets per package |
| HPC3HP |
Paper - Paper for DeskJet 5540 Series, DeskJet 5440 Series, DeskJet 450 Series, DeskJet 6620 Series |
| HPC8511 |
Paper - HP Office Paper - A size (8.5 x 11-inches) - 10 reams |
| HPC8514 |
Paper - HP Office Paper - Legal size (8.5 x 14 inches) - 10 reams |
| HPE1120 |
Paper - HP Office Recycled Paper - A size (8.5 x 11-inches) - 10 reams |
| HPJ1124 |
Paper - HP LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPJ1424 |
Paper - HP LaserJet Paper - 21.6cm (8.5in) x 35.5cm (14in) - 500 sheets |
| HPM1120 |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPM113H |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches), 3 hole - 500 sheets |
| HPM115R |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams |
| HPM115R |
Paper - HP Multipurpose Paper - A size (8.5 x 11-inches) - 5 reams |
| HPM1420 |
Paper - HP Multipurpose Paper - Legal size (8.5 x 14 inches) - 500 sheets |
| HPP1122 |
Paper - HP Printing Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPU1132 |
Paper - HP Premium Choice LaserJet Paper - A size (8.5 x 11-inches) - 500 sheets |
| HPU1732 |
Paper - HP Premium Choice LaserJet Paper - Tabloid size (11 x 17-inches) - 250 sheets per package |
| Q1298A |
Paper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides |
| Q1298B |
Paper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box |
| Q2415A |
Paper - Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 500 sheets per box |
| Q2417A |
Paper - Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 250 sheets per box |
| Q2419A |
Paper - High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 200 sheets per box |
| Q2421A |
Paper - High gloss LaserJet paper - High gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 200 sheets per box |
| Q6541A |
Paper - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
| C9651-69001 |
PC Board - Formatter board assembly |
| RG1-4200-000CN |
PC Board - Paper feeder assembly PC Board - PC Board on right side of 500 sheet paper feeder assembly |
| RG1-4237-030CN |
PC Board - DC controller board - DC Controller for LaserJet 4300 series |
| RG1-4238-000CN |
PC Board - Feeder control PC board |
| J4135A |
PC Board Interface - JetDirect connectivity card - Has one USB port, one serial (DB9) port, and one LocalTalk port - Plugs in one of the EIO slots on selected DesignJet and LaserJet printers |
| J4167A |
PC Board Interface - JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J6057AR |
PC Board Interface - JetDirect 615N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peripheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual |
| J7934G |
PC Board Interface - HP JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peripheral EIO slot - Has an RJ-45 connector - Comes with software on CD-ROM and manual on CD-ROM |
| J7960G |
PC Board Interface - HP Jetdirect 625n internal ethernet print server - Provides 10BaseT, 100BaseTX, or 1000BaseT interface for products with an EIO port |
| RM1-0034-070CN |
Pickup Assembly - Paper pick-up assembly - Paper pickup drive assembly for tray 2 input tray - Does not include the 18-tooth gear - In order to install this part the 18-tooth gear must be removed and replaced |
| Q2431-69015 |
Power Supply - Power supply assembly - 110V |
| RM1-0107-110CN |
Power Supply - Power supply assembly - 110VAC |
| RM1-0108-130CN |
Power Supply - Power supply assembly - 220V |
| Q5406-67901 |
Printer - Lj4350 printer for HP FS-HEWPC-XB |
| Q2448V-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RC1-0268-000CN |
Rod - Metal rod between external power button and switch on power supply board |
| RC1-0070-000CN |
Roller - Pressure roller - Roller in fusing assembly that provides pressure for media against the fusing roller |
| RL1-0019-000CN |
Roller - Tray 1 pickup roller - D-shaped roller located under the envelope cover |
| RM1-0036-020CN |
Roller - Paper pickup roller - Gray spongy rubber roller on a white cylinder and 24-tooth white gear on one side |
| RM1-0037-020CN |
Roller - Paper feed/seperation roller assembly - Black rubber roller on a blue plastic cylinder |
| RM1-0103-060CN |
Roller - Fixing film assembly - Includes heating element, heating element housing tube and fuser film sleeve - 110 volt |
| RM1-0699-020CN |
Roller - Assembly-Transfer RollerTransfer roller assembly - Long black spongy roller that transfers charge to paper |
| XA9-1316-000CN |
Screw - M4X10 Phillips screw with broad flat washer head - Sheet metal thread |
| XB4-7300-605CN |
Screw - Screw - 6 mm Phillips head screw with attached washer |
| RC1-0748-000CN |
Sensor - Paper size sensor block - Spring loaded block which activates the paper size sensor fingers |
| RM1-0285-000CN |
Sensor - Paper sensor assembly - Includes the support tray with the paper stack surface and paper detection sensors, associated sensor flags, and cable assembly. Part approaching End of Life, please contact HP |
| RM1-0294-000CN |
Sensor - Paper size sensor assembly - Includes the three size fingers, micro-switch assembly and housing assembly |
| RM1-8438-000CN |
Sensor - Environmental sensor assembly |
| WG8-5624-000CN |
Sensor - Replacement for part WG8-5362-000CN ORDER WG8-5624-000CN PHOTO-INTERRUPTER TLP1241 Photo-sensor (TLP1241) - Sensor flag activated |
| WG8-5849-000CN |
Sensor - Duplex re-pick sensor - Detects the leading edge of the page |
| Q2448V-Manual_Laser |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| C8530A |
Service Parts - 8MB Flash DIMM\TO ORDER SEE DESCRIP |
| RC1-0210-020CN |
Shaft - Feeder roller shaft - Axel for Tray 2 feed roller |
| RM1-0053-000CN |
Shutter - Left side shutter assembly - Blocks light from scanner on left side |
| RM1-0054-000CN |
Shutter - Right side shutter assembly - Blocks light from scanner on right side |
| RK2-0269-000CN |
Solenoid - Paper pick-up solenoid |
| RK2-0276-000CN |
Solenoid - Tray 1 solenoid - Engages tray 1 pick-up roller |
| RC1-0198-000CN |
Spring - Tension spring - Provides tension for lifter drive assembly |
| RC1-0213-000CN |
Spring - Compression spring - Provides pressure for paper pickup and feed rollers in Tray 2 pickup assembly |
| RC1-0344-020CN |
Support - Fan cover - Metal support strap that main cooling fan fastens to - For fan FN101, main cooling fan on right left side of printer |
| WC4-5139-000CN |
Switch - Top cover interlock access switch |
| RK2-0359-000CN |
Thermistor - Environment temperature detection thermistor - Detects ambient air temperature to determine length of time for fuser warm up. |
| RC1-0335-000CN |
Torque Limiter - Torque limiter - Torque limiter for 500 sheet paper feeder pickup roller |
| RM1-0007-190CN |
Transfer Assembly - Paper transfer assembly |
| RM1-0005-020CN |
Tray - Drop down Tray 1 - Includes adjustable paper width guide assembly |
| RM1-0028-060CN |
Tray - Tray-500 Sheet - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into. |
| RM1-1088-090CN |
Tray - 500-sheet tray/cassette - This is only the tray, does not include feeder or frame that tray goes into. |
| Q2440-67903 |
Tray Assembly - 500-sheet paper feeder and tray/cassette - This is the assembly frame and tray that the printer sits on top of |
| RM1-0004-110CN |
Tray Assembly - Tray 1 paper input assembly unit for Hewlett Packard LaserJet printers. |
View service parts