| RB2-9904-000CN |
Airflow Guide - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side |
| RB9-0901-000CN |
Airflow Guide - Airflow guide (duct) / fan holder bracket assembly (Alloy Gray plastic) |
| RB3-0089-000CN |
Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open |
| RB3-0089-030CN |
Arm - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open |
| RB1-8668-030CN |
Belt - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it |
| RB3-0063-000CN |
Belt - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it |
| RB2-3043-000CN |
Bushing - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1) |
| RB2-3044-000CN |
Bushing - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1) |
| RB2-9809-000CN |
Bushing - Bushing/shaft retainer assembly (White plastic) |
| RB3-1094-000CN |
Bushing - Bushing assembly (Black plastic bushing with small guide roller on top) |
| RB9-0879-000CN |
Bushing - Bushing/shaft retainer assembly (Black plastic) |
| RS5-1635-000CN |
Bushing - Shaft bushing for HP Color LaserJet 1500 Series |
| RS5-1637-000CN |
Bushing - Bushing (black plastic) |
| RS5-1638-000CN |
Bushing - Bushing for HP Color LaserJet 1500 Series |
| 5063-1256 |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| 8121-0712 |
Cable - Universal Serial Bus (USB) interface cable - Type A connector to type B connector - 0.6m (24-inches) long |
| 8121-1036 |
Cable - Universal Serial Bus (USB) interface cable (Black) - Type A connector to type B connector - 0.6m (24-inches) long - USB 2.0 compliant |
| C2950A |
Cable - IEEE 1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36-pin Centronics (M) connector (type B) - 2.0m (6.6ft) long |
| C2951A |
Cable - IEEE-1284 Bi-Tronics parallel cable - DB-25 (M) connector (type A) to 36 pin Centronics (M) connector (type B) - 3.0m (9.8ft) long |
| C6518A |
Cable - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long |
| Q3948-60144 |
Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101) |
| RG5-6971-000CN |
Cable - Cable assembly (two 3-pin connectors and a spad lug) |
| RG5-7106-000CN |
Cable - Cable assembly (two 2-pin connectors) |
| RG5-7108-000CN |
Cable - Cable assembly (two 8-pin connectors, Purple wire) |
| RG5-7109-000CN |
Cable - Cable assembly (two 7-pin connectors) |
| RG5-7114-000CN |
Cable - Cable assembly (two 4-pin connectors) with shield |
| RG5-7114-020CN |
Cable - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board |
| RG5-7115-000CN |
Cable - Cable assembly (two 3-pin connectors) |
| RG5-7117-000CN |
Cable - Cable assembly (two 3-pin connectors) |
| RG5-7122-000CN |
Cable - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector |
| RG5-7123-000CN |
Cable - Grounding cable assembly |
| RG5-7126-000CN |
Cable - Cable assembly (two 5-pin connectors) |
| RG5-7128-000CN |
Cable - Cable assembly (four 3-pin connectors) |
| RG5-7129-000CN |
Cable - Cable assembly (two connectors and two spade lugs) |
| RG5-7130-000CN |
Cable - High voltage cable assembly |
| RG5-7145-000CN |
Cable - Front cable assembly (six connectors) |
| RG5-7146-000CN |
Cable - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors) |
| RG5-7160-000CN |
Cable - Upper cable assembly (seven connectors) |
| RG5-7161-000CN |
Cable - Cable assembly (two 3-pin connectors and a spad lug) |
| RG5-7620-000CN |
Cable - Cable assembly (two 5-pin connectors) |
| RG5-7621-000CN |
Cable - Cable assembly (two 8-pin connectors) |
| RG5-7622-000CN |
Cable - Upper cable assembly (seven connectors) |
| RG5-7624-000CN |
Cable - Cable assembly (two 3-pin connectors) |
| RH2-5524-000CN |
Cable - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101) |
| RG5-7587-000CN |
Carousel - Carousel (rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables |
| RG5-7587-090CN |
Carousel - Carousel (rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables |
| 6R1285 |
Cartridge - Yield black toner |
| 6R1286 |
Cartridge - Yield cyan toner |
| 6R1287 |
Cartridge - Yield yellow toner |
| 6R1288 |
Cartridge - Yield magenta toner |
| Q3960-67901 |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages based on a 5% print density (not for Europe) |
| Q3960-67901 |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages based on a 5% print density (not for Europe) |
| Q3960-67902 |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages based on a 5% print density (Europe) |
| Q3960-67902 |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages based on a 5% print density (Europe) |
| Q3960A |
Cartridge - HP Color LaserJet smart Black print cartridge - Will print approximately 5,000 pages based on a 5% print density |
| Q3961-67901 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3961-67901 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3961-67902 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3961-67902 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3961A |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 4,000 pages based on a 5% print density |
| Q3962-67901 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3962-67901 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3962-67902 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3962-67902 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3962A |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 4,000 pages based on a 5% print density |
| Q3963-67901 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3963-67901 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 4,000 pages based on a 5% print density (not for Europe) |
| Q3963-67902 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3963-67902 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 4,000 pages based on a 5% print density (Europe) |
| Q3963A |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 4,000 pages based on a 5% print density |
| Q3971-67901 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 2,000 pages at based on a 5% print density (not for Europe) |
| Q3971-67901 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 2,000 pages at based on a 5% print density (not for Europe) |
| Q3971-67902 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3971-67902 |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3971A |
Cartridge - HP Color LaserJet smart Cyan print cartridge - Will print approximately 2,000 pages based on a 5% print density |
| Q3972-67901 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 2,000 pages based on a 5% print density (not for Europe) |
| Q3972-67901 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 2,000 pages based on a 5% print density (not for Europe) |
| Q3972-67902 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3972-67902 |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3972A |
Cartridge - HP Color LaserJet smart Yellow print cartridge - Will print approximately 2,000 pages based on a 5% print density |
| Q3973-67901 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 2,000 pages based on a 5% print density (not for Europe) |
| Q3973-67901 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 2,000 pages based on a 5% print density (not for Europe) |
| Q3973-67902 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3973-67902 |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 2,000 pages based on a 5% print density (Europe) |
| Q3973A |
Cartridge - HP Color LaserJet smart Magenta print cartridge - Will print approximately 2,000 pages based on a 5% print density |
| WT2-5700-000CN |
Clamp - Cable clamp - White plastic clamp with mounting pin |
| 5090-3379 |
Cleaner - Toner cleaning cloth - Specially treated cloth for absorbing toner (1 per package) - Ideal for cleaning up toner spills |
| WT2-5056-000CN |
Clip - Cable clip - `C` shaped White plastic |
| XD2-1100-322CN |
Clip - E-ring retainer clip |
| XD2-1100-502CN |
Clip - E-ring clip for HP Color LaserJet 1500 Series |
| RH7-5335-000CN |
Clutch - Electromagnetic clutch assembly (24VDC) - Electrical clutch between the clutch drive gear and shaft |
| RH7-5366-000CN |
Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft |
| RH7-5378-000CN |
Clutch - Clutch electromagnetic HP LaserJet Cluth Assembly Magnetic. |
| RH7-5389-000CN |
Clutch - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft |
| RH2-5519-000CN |
Connector - Connector assembly - For optional paper tray |
| WS1-6336-000CN |
Connector - Connector assembly - For optional bottom paper tray |
| WT2-5737-000CN |
Connector - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other |
| RG5-7570-000CN |
Control Panel - Control panel assembly (mechanical only) - Includes the Rotate Carousel, Cancel Job and the Go buttons, plus the various indicator light pipes - All switches and LEDs are on the formatter PC board |
| RG5-7570-020CN |
Control Panel - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board - Mounts to the top of the right cover assembly |
| RB2-9916-020CN |
Cover - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly |
| RB3-0052-000CN |
Cover - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft |
| RB3-0104-000CN |
Cover - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly |
| RB3-0120-000CN |
Cover - Solenoid cover (Steel) - For magnetic wave sheilding |
| RB3-0120-020CN |
Cover - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly |
| RB3-1108-000CN |
Cover - Front inner cover (Graphite Black plastic) - Mounts on the front frame above the multi-purpose input tray |
| RB3-1112-000CN |
Cover - Interface bezel (Alloy Gray plastic) - Vertical cover that surronds the interface connectors |
| RB9-0880-000CN |
Cover - Upper rear cover (Alloy Gray plastic) |
| RB9-0881-000CN |
Cover - Face-down paper output cover (L-Shaped Graphite Black plastic) - Serves as the rear of the tray for the face-down output tray on top of the printer |
| RB9-0886-000CN |
Cover - Left side cover ONLY (Alloy Gray plastic) - Does not include any attaching parts |
| RB9-0897-000CN |
Cover - Front lower cover (Graphite Black plastic) - Front lower strip below the multipurpose input tray - Has recessed area for the printer logo |
| RG5-7567-000CN |
Cover - Top cover assembly (Graphite Black plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly |
| RG5-7569-000CN |
Cover - Right side cover assembly (Light Gray plastic) - Includes the DIMM memory door |
| RG5-7571-000CN |
Cover - Left side cover assembly (Alloy Gray plastic) - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board) |
| RB2-6248-000CN |
Damper - Damper assembly (Gray plastic piece with small 13-tooth gear on it) |
| RB9-0884-000CN |
Door - DIMM memory door (Alloy Gray perforated plastic) - Access door for adding or removing printer memory or font DIMM |
| RF5-4069-000CN |
Door - Top cover door (Graphite Black plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly |
| RG5-7592-000CN |
Drive Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears |
| RG5-7842-000CN |
Drive Assembly - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears |
| Q3964-67901 |
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print ONLY, 5,000 pages for color (typical combined life is approximately 8,000 to 10,000 pages) |
| Q3964A |
Drum - Imaging drum/transfer assembly cartridge - Inserts into printer through the top door - Life expectancy is 20,000 pages for black print only, 5,000 pages for color (typical combined life is approximately 8,000 to 10,000 pages) |
| RH7-1537-000CN |
Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) |
| RH7-1630-000CN |
Fan - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA) |
| C2934A |
Film - Film (Transparency) for Color LaserJet 5, Color LaserJet 5M Series, Color LaserJet 8500 Series, Color LaserJet 4500 Series |
| C2936A |
Film - Color LaserJet transparency film - A4 size (21.0cm x 29.7cm) - 50 sheets per box |
| RB2-9925-000CN |
Flag - Sensor arm and flag - Activates the photosensor (Does NOT include the roller) |
| RB3-0111-000CN |
Flag - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other |
| RB3-0135-000CN |
Flag - Test print flag (Black lever) |
| RB2-6297-000CN |
Foot - Rubber foot - Square self-adhesive rubber foot |
| RG5-7572-110CN |
Fuser Assembly - Fuser Assembly - For 110V to 127V AC operation - Bonds the toner to the paper with heat |
| RG5-7573-000CN |
Fuser Assembly - Fuser Assembly - For 220V to 240V AC operation - Bonds the toner to the paper with heat |
| RG5-7573-110CN |
Fuser Assembly - Fusing assembly - For 220V to 240V AC operation - Bonds the toner to the paper with heat |
| RB3-0022-000CN |
Gear - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth |
| RB3-0091-000CN |
Gear - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab |
| RB3-0092-000CN |
Gear - 15 tooth gear with drive shaft (Black plastic) |
| RG5-6938-000CN |
Gear - Gear assembly - Metal plate with two White plastic gears attached |
| RS7-0418-000CN |
Gear - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away |
| RS7-0424-000CN |
Gear - Dual gear - 20 tooth / 40 tooth |
| RS7-0425-000CN |
Gear - 30 tooth gear (White plastic) |
| RS7-0426-000CN |
Gear - Dual gear - 26 tooth / 50 tooth (White plastic) |
| RS7-0428-000CN |
Gear - 30 tooth gear (White plastic) |
| RS7-0429-000CN |
Gear - 26 tooth gear (White plastic) - Has recess for shaft drive pin |
| RS7-0435-000CN |
Gear - Dual gear - 32 tooth / 37 tooth (White plastic) |
| RS7-0436-000CN |
Gear - Dual gear - 37 tooth / 43 tooth (White plastic) |
| RS7-0437-000CN |
Gear - 51 tooth gear (White plastic) |
| RS7-0570-000CN |
Gear - 81 tooth gear for HP Color LaserJet 2820 Series |
| RS7-0571-000CN |
Gear - Dual gear - 23 tooth / 54 tooth |
| RS7-0572-000CN |
Gear - Dual gear - 31 tooth / 90 tooth |
| RS7-0573-000CN |
Gear - 186 tooth gear for HP Color LaserJet 2550 Series |
| RS7-0574-000CN |
Gear - Dual gear - 32 tooth / 123 tooth |
| RG5-6938-030CN |
Gear Assembly - Gear assembly - Metal plate with two White plastic gears attached |
| RB2-9852-000CN |
Guide - Rotary release guide - Small plastic clip that allows for manual carousel rotation (with a straightened paper clip) for removing toner cartridges without power |
| RB2-9903-000CN |
Guide - Cable guide (Quartz Gray plastic) |
| RB2-9954-000CN |
Guide - Left paper feed guide (small Black plastic arm) |
| RB2-9955-000CN |
Guide - Right paper feed guide (small Black plastic arm) |
| RB3-1088-000CN |
Guide - Transfer inlet guide assembly - Angled metal guide between the registration roller and the transfer roller |
| RF5-4065-000CN |
Guide - Entrance guide assembly |
| RG5-6935-000CN |
Guide - Left cartridge guide assembly |
| RG5-6935-020CN |
Guide - Left cartridge guide assembly |
| RG5-7584-000CN |
Guide - Paper guide assembly - Paper width adjustable guide assembly for the multipurpose front input tray (tray 1) |
| RB9-0889-000CN |
Hinge - Tray hinge - 'L' shaped plastic arm - For the left side of the multi-purpose front input tray (tray 1) |
| RB9-0890-000CN |
Hinge - Tray hinge - 'L' shaped plastic arm - For the right side of the multipurpose front input tray (tray 1) |
| RB2-9924-000CN |
Holder - Sensor assembly mounting holder |
| RB3-0006-000CN |
Holder - Holder - Housing for the fusing connector assembly |
| RB3-0023-000CN |
Holder - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch |
| RB3-0007-000CN |
Insulator - Insulating sheet (Transparent plastic) |
| RB3-1110-000CN |
Insulator - Insulating sheet (Transparent plastic) - For the power supply base assembly |
| Q2550A |
Label - Label for DeskJet 660 Series, DeskJet 300, DeskJet 420C, DeskJet 1220 Series |
| Q2551A |
Label - Label for PSC 1118 Series, PSC 1200 Series All-in-One, PSC 1200 Series All in One, HP PSC 1210 All-in-One |
| Q2587A |
Label - White labels - 2.5cm (1.0in) x 6.6cm (2.6in) - 30 labels per sheet, 25 sheets per box |
| Q2588A |
Label - Label for OfficeJet 6100 Series, Digital Copier Printer 410, PSC 1110 Series All in One, PSC 1118 Series |
| Q2589A |
Label - Label for LaserJet 2400 Series, PhotoSmart 7830 Series, HP Photosmart 7850 Photo Series, Photosmart 7850 Photo Printer |
| Q2590A |
Label - Label for PSC 900 Series All in One, PhotoSmart 100 Printer, PhotoSmart 130 Series, Color LaserJet 9500 Series |
| Q2591A |
Label - Label for PSC 1200 Series All-in-One, PSC 1200 Series All in One, HP PSC 1210 All-in-One, OfficeJet 5110 Series All-in-One |
| Q2592A |
Label - Label for OfficeJet D Series All in One, OfficeJet 7100 Series All in One, OfficeJet V40 Series, PSC 900 Series All-in-One |
| Q2593A |
Label - Label for PSC 1200 Series All in One, Color LaserJet 5500 Series, OfficeJet D Series All-in-One, OfficeJet D Series All in One |
| Q2594A |
Label - White address labels - 8.4cm (3.3in) x 10cm (4in) - 6 labels per sheet, 100 sheets per box |
| RS6-8662-000CN |
Label - Label for Color LaserJet 2500 Series, Color LaserJet 1500 Series, Color LaserJet 2550 Series |
| RS6-8668-000CN |
Label - High voltage caution label |
| RG5-6880-000CN |
Laser Scanner - Laser/scanner assembly |
| RG5-6890-030CN |
Laser Scanner - Laser/scanner assembly |
| C7845-67901 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| C7845A |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| C9121-67901 |
Memory - 128MB, 100-pin SDRAM DIMM memory module |
| C9121A |
Memory - 128MB, 100-pin SDRAM DIMM memory module |
| Q1887-67901 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q1887A |
Memory - 64MB, 100-pin SDRAM DIMM memory module |
| Q7707-67951 |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7707AX |
Memory - 32MB, 100-pin SDRAM DIMM memory module |
| Q7708-67951 |
Memory - 64MB SDRAM - 100MHz synchronous DRAM - DIMM package |
| Q7709-67951 |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| Q7709A |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| Q7709AX |
Memory - 133 MHz 128MB, 100-pin SDRAM DIMM memory module Synchronous DRAM DIMM |
| RF5-4063-000CN |
Motor - Main motor assembly - Large motor mounted on a controller PC board |
| RF5-4063-030CN |
Motor - Main motor assembly - Large motor mounted on a controller PC board - (DCM701) Mounts on the inside of the metal right side frame assembly |
| RG5-7593-000CN |
Motor - Rotary motor assembly - (DCM703) Rotates the four color toner cartridges in the carousel to position one of them for printing |
| RH7-1533-000CN |
Motor - Stepping motor - 24V DC |
| RH7-1535-000CN |
Motor - Stepping motor (24V) |
| RH7-1613-000CN |
Motor - Fusing motor assembly - 24VDC motor mounted on a controller PC board |
| RH7-1625-000CN |
Motor - Stepping motor - 24VDC |
| RH7-1628-000CN |
Motor - Fusing motor assembly - 24VDC motor mounted on a motor controller PC board |
| RH7-1629-000CN |
Motor - Stepping motor - 24V DC |
| RH7-1651-000CN |
Motor - Rotary motor assembly - (DCM703) Rotates the four color toner cartridges in the carousel to position one of them for printing |
| Q3703-67902 |
NamePlate - LaserJet 2550Ln Nameplate |
| RF5-4012-000CN |
Pad - Separation pad assembly - Includes the separation pad, holder and spring |
| RF5-4047-000CN |
Pad - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded) |
| 5851-1468 |
Paper - LaserJet printer family paper specification guide |
| Q1298A |
Paper - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides |
| Q1298B |
Paper - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box |
| Q2413A |
Paper - Premium LaserJet cover paper - Heavyweight (75lb), smooth finish on both sides, 96 brightness - A size (8.5 x 11-inches) - 100 sheets per box |
| Q2415A |
Paper - Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A size (8.5 x 11-inches) - 500 sheets per box |
| Q2417A |
Paper - Soft gloss LaserJet paper - Soft gloss finish on both sides, 95 brightness - A4 size (21.0cm x 29.7cm) - 250 sheets per box |
| Q6541A |
Paper - HP Color Laser Soft-gloss Presentation Paper - A size (8.5 x 11-inches) - 200 sheets |
| Q6542A |
Paper - Paper (Glossy) for LaserJet 5200 series, LaserJet 1320t Printer, Color LaserJet 2605 Printer, Color LaserJet 2700 Printer |
| Q6543A |
Paper - Paper (Matte) for Color LaserJet 4700, LaserJet 1320t Printer, LaserJet P3xxx Printer, Color LaserJet 2605 Printer |
| Q6544A |
Paper - Paper (Matte) for LaserJet 4P Series, LaserJet 2100 Series, Color LaserJet 5500 Series, Color LaserJet 9500 Series |
| Q6545A |
Paper - Paper (Glossy) for Color LaserJet 5500 Series, Color LaserJet 9500 Series, LaserJet 1022 Seriess, Color LaserJet 3500 Series |
| Q6547A |
Paper - Paper (Glossy) for Color LaserJet 5500 Series, Color LaserJet 9500 Series, Color LaserJet CM1015 MFP, Color LaserJet CM1017 MFP |
| Q6549A |
Paper - Paper (Matte) for Color LaserJet 5500 Series, Color LaserJet 9500 Series, Color LaserJet 1600 Printer, Color LaserJet CM1015 MFP |
| Q6550A |
Paper - Paper (Matte) for Color LaserJet 5500 Series, Color LaserJet 9500 Series, Color LaserJet CM1015 MFP, Color LaserJet CM1017 MFP |
| Q3703-67901 |
PC Board - Formatter board assembly - Includes the formatter board, JetDirect print server board, and all the metal cage covers - Mounts towards the rear on the metal right frame assembly |
| Q3703-69001 |
PC Board - Formatter board assembly- (Requires core return) Includes the formatter board, JetDirect print server board, and all the metal cage covers - Mounts towards the rear on the metal right frame |
| RG5-6964-000CN |
PC Board - Carousel position and toner level photoelectric sensor PC board - L Shaped PC board with the two sensors |
| RG5-6967-000CN |
PC Board - Registration sensor PC Board - Small board with flag activated photosensor |
| RG5-7607-000CN |
PC Board - Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge |
| RG5-7609-000CN |
PC Board - Carousel position and toner level photoelectric sensor PC board - `L` Shaped PC board with the two sensors |
| RG5-7611-030CN |
PC Board - DC controller board |
| RG5-7612-000CN |
PC Board - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch |
| RG5-7613-000CN |
PC Board - Registration sensor PC Board - Small board with flag activated photosensor |
| RG5-7648-000CN |
PC Board - Waste toner sensor assembly PC board - Detects excess level of waste toner in the imaging drum/transfer assembly cartridge |
| RH7-7146-000CN |
PC Board - Density photoelectric sensor PC board |
| RH7-7158-000CN |
PC Board - Density photoelectric sensor PC board |
| WG8-5382-000CN |
PC Board - Sensor PC board - Small board with flag activated photosensor |
| WG8-5593-000CN |
PC Board - Sensor PC board - Small board with flag activated photosensor |
| WG8-5836-000CN |
PC Board - PHOTOINTERRUPTER Stapler Stacker |
| J3258B |
PC Board Interface - External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN |
| J3263G |
PC Board Interface - HP JetDirect 300X external print server module (10Base-T and 100Base-TX) - Connects between printer parallel port and LAN network |
| J3265G |
PC Board Interface - HP JetDirect 500X external token ring print server module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| J6035C |
PC Board Interface - JetDirect 175X Fast Ethernet external print server - Has on 4-pin USB connector and one RJ-45 LAN connector - Connects to the printer via the USB port and the network via the LAN port |
| J6061A |
PC Board Interface - HP JetDirect 380X external IEEE-802.11b (Wi-Fi) wireless print server - Connects to printer using Universal Serial Bus (USB) cable |
| J7942A |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| J7942G |
PC Board Interface - HP JetDirect en3700 external print server - Fast Ethernet Internet connector for sharing peripherals with USB ports, in a 10/100 TX LAN environment - Has one USB 2.0 printer port and one RJ-45 10/100 Base-TX connector - Includes software and power module |
| RB2-9916-000CN |
Plate - Mounting/grounding plate |
| RB3-0010-030CN |
Plate - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through |
| RB3-0057-000CN |
Plate - Transfer slide plate - Small 'U' shaped metal insert plates |
| RB3-0065-000CN |
Plate - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor |
| RB3-0066-000CN |
Plate - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor |
| RB3-0286-000CN |
Plate - Contact plate for HP Color LaserJet 2500 Seriess |
| RB3-1113-000CN |
Plate - Grounding plate - Small plate with grounding finger |
| 8120-6800 |
Power Cord - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
| 8120-6809 |
Power Cord - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia) |
| 8120-6810 |
Power Cord - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand) |
| 8120-6811 |
Power Cord - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea) |
| 8120-6812 |
Power Cord - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan) |
| 8120-6813 |
Power Cord - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia) |
| 8120-6814 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark) |
| 8120-6815 |
Power Cord - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland) |
| RG5-7124-000CN |
Power Supply - Sub-high voltage board - Small auxillary PC board |
| RG5-7606-000CN |
Power Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer |
| RG5-7616-000CN |
Power Supply - Sub-high voltage board - Small auxillary PC board |
| RG5-7647-000CN |
Power Supply - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer |
| RH3-2262-000CN |
Power Supply - Low voltage power supply - For 110VAC to 127VAC operation - Includes the AC power input connector and power switch |
| RH3-2262-020CN |
Power Supply - Low voltage power supply - For 110VAC to 127VAC operation - Includes the AC power input connector and power switch |
| RH3-2263-000CN |
Power Supply - Low voltage power supply - For 220VAC to 240VAC operation - Includes the AC power input connector and power switch |
| RH3-2263-020CN |
Power Supply - Low voltage power supply - For 220VAC to 240VAC operation - Includes the AC power input connector and power switch |
| RG5-7589-000CN |
Pressure Assembly - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft |
| J3263A |
Print Server - External JetDirect 300X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) or 100Base-TX (RJ-45) LAN |
| J3265A |
Print Server - External JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45), 10Base2 (BNC), or 100Base-TX (RJ-45) LAN |
| RB3-0061-000CN |
Pulley - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys |
| RB3-0067-000CN |
Pulley - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley |
| RB3-0090-000CN |
Rack Slide - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides |
| RG5-6956-000CN |
Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board |
| RG5-6957-000CN |
Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board |
| RG5-7131-000CN |
Reader - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board |
| RG5-7132-000CN |
Reader - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board |
| Q3703A-Repair_LaserJet |
Repair Service - Ship your product to us for a small diagnostic fee; and a professional service job. We will contact you with repair total and your diagnostic fee will be waived if unit is repaired. Service warranty is 30days labor and 90days for parts. Extended warranty option is available. |
| RH5-3115-000CN |
Resistor - 500 Meg-ohm, 300mW |
| RH5-3169-000CN |
Resistor - Resistor - 500 Meg ohm, 300mW |
| RB3-0037-000CN |
Rod - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board |
| RB2-7195-000CN |
Roller - Sensor flag roller (small White plastic roller) |
| RB2-9909-000CN |
Roller - Pressure roller (small Black hard plastic 'solid' roller) |
| RB3-0012-000CN |
Roller - Belt roller - Small oval shaped roller approximately 1-3/4 inches long |
| RB3-0160-000CN |
Roller - Paper pickup roller ('D' shaped) |
| RB3-1034-000CN |
Roller - Pressure roller assembly - Hard rubber roller on a metal drive shaft |
| RF5-4067-030CN |
Roller - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper |
| RG5-6897-020CN |
Roller - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear |
| RG5-6939-020CN |
Roller - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag |
| RG5-6952-000CN |
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) |
| RG5-6952-020CN |
Roller - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly |
| RG5-7595-000CN |
Roller - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear |
| XA9-0849-000CN |
Screw - 4 M3 truss-head phillips screw with machine threads included - 6mm long |
| XA9-0890-000CN |
Screw - M3 truss-head phillips screw with machine threads - 6mm long |
| XA9-1262-000CN |
Screw - M4 pan-head phillips screw with self-tapping threads - 10mm long |
| XA9-1291-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XA9-1328-000CN |
Screw - M3 pan-head Phillips screw - 10mm long |
| XA9-1355-000CN |
Screw - M3 pan-head Phillips screw with machine threads - 8mm long |
| XA9-1449-000CN |
Screw - M3 pan-head Phillips screw with machine threads - 8mm long |
| XA9-1495-000CN |
Screw - 4 Wafer head machine screw included - M3, 6mm long, No. 2 Phillips recess - Secures metal to sheet metal |
| XA9-1500-000CN |
Screw - M3 pan-head Phillips screw with flat washer - 8mm long |
| XA9-1501-000CN |
Screw - M3 pan-head Phillips screw - 10mm long |
| XB4-7401-005CN |
Screw - M4 truss head (flanged) screw - 10mm long - Typically used to secure plastic parts to the left and right side plates |
| Q3703A-Manual_Color |
Service Manual - Printer Service Manual - Includes troubleshooting, error messages, paper jams, parts and parts diagrams. |
| RB3-0011-000CN |
Shaft - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley |
| RB3-0060-020CN |
Shaft - Idler gear shaft - Short metal rod |
| RB2-9932-000CN |
Shield - RFI shield - Parallel wire form mounted over the fan |
| RG5-6940-050CN |
Shutter - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear |
| RG5-6942-000CN |
Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges |
| RG5-6942-030CN |
Sideplate - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame |
| RG5-7579-000CN |
Sideplate - Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears) |
| RG5-7579-070CN |
Sideplate - Main drive (right side plate) assembly - Includes the right side plate front assembly (with main motor, clutch, and gears) and the right side plate rear assembly (with drive gears) |
| RG5-7580-000CN |
Sideplate - Right side plate rear assembly - Includes the rear half of the metal right side plate and the two associated gears |
| RG5-7580-020CN |
Sideplate - Right side plate rear assembly - Includes the rear half of the metal right side plate and the two associated gears |
| RG5-7581-000CN |
Sideplate - Right side plate front assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side |
| RG5-7581-060CN |
Sideplate - Right side plate front assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side |
| RH7-5338-000CN |
Solenoid - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1) |
| RH7-5340-000CN |
Solenoid - Solenoid assembly |
| RH7-5383-000CN |
Solenoid - Solenoid assembly - (SL92) Lever on the solenoid disengages the stop on the drive gear on the paper pickup roller for the multipurpose input tray (tray 1) |
| RH7-5384-000CN |
Solenoid - Solenoid assembly |
| RB2-9905-000CN |
Spring - Torsion spring for HP Color LaserJet 2500 Series |
| RB2-9952-000CN |
Spring - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag |
| RB2-9999-000CN |
Spring - Torsion spring for HP Color LaserJet 2820 Series |
| RB3-0015-000CN |
Spring - Compression spring |
| RB3-0016-000CN |
Spring - Electrical contact spring - Spring steel wire with compression springs formed on both ends |
| RB3-0042-000CN |
Spring - Electrical contact spring |
| RB3-0043-000CN |
Spring - Electrical contact spring |
| RB3-0044-000CN |
Spring - Electrical contact spring |
| RB3-0045-000CN |
Spring - Electrical contact spring |
| RB3-0046-000CN |
Spring - Electrical contact spring |
| RB3-0047-000CN |
Spring - Electrical contact spring |
| RB3-0048-000CN |
Spring - Electrical contact spring |
| RB3-0121-000CN |
Spring - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer |
| RB3-0122-000CN |
Spring - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer |
| RB3-1065-000CN |
Spring - Torsion spring for HP Color LaserJet 2820 Series |
| RS6-2030-000CN |
Spring - Tension spring for HP Color LaserJet 1500 Series |
| RS6-2759-000CN |
Spring - Compression spring |
| RS6-2766-000CN |
Spring - Tension spring for HP Color LaserJet 1500 Series |
| VT2-0012-005CN |
Standoff - PC Board support - Plastic standoff for supporting a PC board |
| RB3-0009-000CN |
Static Dissipater - Static eliminator ground plate - Right angled metal piece with small teeth on top edge |
| RB3-0062-000CN |
Support - PC board support (Black plastic holder) |
| RG5-6907-030CN |
Support - Laser/scanner support assembly (sheet metal plate) |
| RH7-6051-000CN |
Switch - Microswitch with lever activator |
| RH7-7149-000CN |
Thermistor - Thermistor for HP Color LaserJet 2500 Series |
| RH7-7159-000CN |
Thermistor - Thermistor for HP Color LaserJet 2820 Series |
| C9706-67901 |
Tray - Multipurpose tray (tray 1) service kit - Includes one paper pickup roller and one separation pad assembly |
| C9706-67902 |
Tray - Multipurpose tray (tray 1) service kit with extra separation pads - Includes one paper pickup roller and three separation pad assembly |
| Q3709-67901 |
Tray - Replacement 250-sheet paper input feeder assembly - Includes tray base which attaches to printer, and the paper cassette tray - Accommodates 148mm x 210mm (5.8 x 8.3 inches) to 216mm x 356mm (8.5 x 14 inches) media - Only one 250-sheet feeder supported |
| Q3709A |
Tray - Optional 250 sheet paper input tray - Includes tray base which attaches to printer, and the slide out paper tray - Accommodates 148mm x 210mm (5.8 x 8.3 inches) to 216mm x 356mm (8.5 x 14 inches) media - Only one 250 sheet tray supported per printer |
| Q3710-67901 |
Tray - Replacement optional 500-sheet paper feeder assembly - Includes feeder base which attaches to tray 2, and the slide out paper tray - Note that the optional 250-sheet feeder assembly must be installed first |
| Q3710A |
Tray - Optional 500 sheet paper feeder assembly - Includes the feeder base which attaches to tray 2, and slide out paper tray - Accommodates 216mm x 279mm (8.5 x 11in) or 210mm x 279mm (8.3 x 11.7in) media - Optional 250 sheet feeder must be installed first |
| RB3-0019-000CN |
Tray - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum |
| RG5-7585-000CN |
Tray Assembly - Multipurpose front input tray assembly (tray 1) - Includes the front cover piece, pull-out paper support, and the flip-out extender - Mounts on front of printer (on the front frame assembly) |
Techical Help
View service parts